Re: USB scanner unrecognized on 1.11-DEVELOPMENT

[Francois Tigeot <ftigeot@xxxxxxxxxxxx>]

On Tue, Jan 15, 2008 at 02:23:15PM +0000, Steve O'Hara-Smith wrote:
> On Tue, 15 Jan 2008 15:02:33 +0100
> Matthias Schmidt <matthias@dragonflybsd.org> wrote:
> 
> > * Steve O'Hara-Smith wrote:
> > > 
> > > 	It may help to know that I am running a recent 1.11.0 (Jan 12 or
> > > thereabouts) which does recognise my Perfection 1240U and it works
> > > (quick test, I haven't had to use it in a while).
> > 
> > Could you please post the dmesg output (if there is any :)?
> 
> 	Sure - there's not a lot:
> 
> uscanner0: <EPSON Perfection1240, class 255/255, rev 1.00/1.04, addr 6> on
> uhub3
> 
> 	Also from usbdevs -v 
> 
>   port 2 addr 6: full speed, self powered, config 1, Perfection1240
> (0x010b), EPSON(0x04b8), rev 1.04

On my setup, even with a kernel printing an uscanner0 line in dmesg, the
scanner never appears in the usbdevs output:

# usbdevs -v
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
 port 1 powered
 port 2 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
 port 1 powered
 port 2 addr 2: low speed, power 98 mA, config 1, USB-PS/2 Optical Mouse(0xc012), Logitech(0x046d), rev 13.20
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
 port 1 powered
 port 2 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
 port 1 powered
 port 2 powered

-- 
Francois Tigeot