=> Bootstrap dependency digest>=20010302: found digest-20080510 => Checksum SHA1 OK for squid-3.1.0.9.tar.bz2 => Checksum RMD160 OK for squid-3.1.0.9.tar.bz2 ===> Installing dependencies for squid-3.1.0.9nb1 ========================================================================== The supported build options for squid are: snmp squid-backend-aufs squid-backend-diskd squid-backend-null squid-backend-ufs squid-carp squid-ipf squid-ldap-helper squid-pam-helper squid-pf squid-unlinkd ssl The currently selected options are: snmp squid-backend-diskd squid-carp squid-pam-helper squid-unlinkd ssl You can select which build options to use by setting PKG_DEFAULT_OPTIONS or the following variable. Its current value is shown: PKG_OPTIONS.squid (not defined) ========================================================================== ========================================================================== The following variables will affect the build process of this package, squid-3.1.0.9nb1. Their current value is shown below: * LOGDIR = /var/squid/logs * PAM_DEFAULT = openpam * SSLBASE = /usr * SSLCERTS = /etc/ssl/certs * SSLDIR = /etc/ssl * SSLKEYS = /etc/ssl/private * VARBASE = /var Based on these variables, the following variables have been set: * PAMBASE (defined, but empty) * PAM_TYPE = openpam You may want to abort the process now with CTRL-C and change their value before continuing. Be sure to run `/usr/pkg/bin/bmake clean' after the changes. ========================================================================== => Build dependency gmake>=3.81: found gmake-3.81 => Build dependency perl>=5.0: found perl-5.10.0nb6 => Build dependency checkperms>=1.1: found checkperms-1.10 ===> Overriding tools for squid-3.1.0.9nb1 ===> Extracting for squid-3.1.0.9nb1 ===> Patching for squid-3.1.0.9nb1 => Applying pkgsrc patches for squid-3.1.0.9nb1 ===> Creating toolchain wrappers for squid-3.1.0.9nb1 ===> Configuring for squid-3.1.0.9nb1 => Fixing configuration files. INFO: [subst.mk:confs] Nothing changed in ./src/cf.data.pre. => Modifying GNU configure scripts to avoid --recheck => Replacing config-guess with pkgsrc versions => Replacing config-sub with pkgsrc versions => Replacing install-sh with pkgsrc version => Checking for portability problems in extracted files configure: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used. checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether build environment is sane... yes checking for a thread-safe mkdir -p... cfgaux/install-sh -c -d checking for gawk... /usr/bin/awk checking whether make sets $(MAKE)... yes checking for i386-pc-dragonfly-strip... no checking for strip... strip checking how to create a ustar tar archive... gnutar checking whether to enable maintainer-specific portions of Makefiles... no checking for i386-pc-dragonfly-gcc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of cc... gcc3 checking whether cc understands -c and -o together... yes checking whether we are using the GNU C++ compiler... yes checking whether c++ accepts -g... yes checking dependency style of c++... gcc3 checking build system type... i386-unknown-dragonfly2.3.1 checking host system type... i386-pc-dragonfly checking whether to use loadable modules... yes, implicitly checking for a sed that does not truncate output... /scratch/www/squid31/work/.tools/bin/sed checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for ld used by cc... /scratch/www/squid31/work/.wrapper/bin/ld checking if the linker (/scratch/www/squid31/work/.wrapper/bin/ld) is GNU ld... yes checking for /scratch/www/squid31/work/.wrapper/bin/ld option to reload object files... -r checking for BSD-compatible nm... nm checking whether ln -s works... yes checking how to recognize dependent libraries... pass_all checking how to run the C preprocessor... cc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking how to run the C++ preprocessor... c++ -E checking for i386-pc-dragonfly-g77... f77 checking whether we are using the GNU Fortran 77 compiler... no checking whether f77 accepts -g... no checking the maximum length of command line arguments... 196608 checking command to parse nm output from cc object... ok checking for objdir... .libs checking for i386-pc-dragonfly-ar... no checking for ar... ar checking for i386-pc-dragonfly-ranlib... no checking for ranlib... ranlib checking for i386-pc-dragonfly-strip... strip checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC checking if cc PIC flag -fPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking whether the cc linker (/scratch/www/squid31/work/.wrapper/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking for shl_load... no checking for shl_load in -ldld... no checking for dlopen... yes checking whether a program can dlopen itself... yes checking whether a statically linked program can dlopen itself... no checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by c++... /scratch/www/squid31/work/.wrapper/bin/ld checking if the linker (/scratch/www/squid31/work/.wrapper/bin/ld) is GNU ld... yes checking whether the c++ linker (/scratch/www/squid31/work/.wrapper/bin/ld) supports shared libraries... yes checking for c++ option to produce PIC... -fPIC checking if c++ PIC flag -fPIC works... yes checking if c++ static flag -static works... yes checking if c++ supports -c -o file.o... yes checking whether the c++ linker (/scratch/www/squid31/work/.wrapper/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly ld.so (cached) (cached) checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for f77 option to produce PIC... -fPIC checking if f77 PIC flag -fPIC works... no checking if f77 static flag -static works... no checking if f77 supports -c -o file.o... no checking whether the f77 linker (/scratch/www/squid31/work/.wrapper/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly ld.so (cached) (cached) checking how to hardcode library paths into programs... immediate checking for shl_load... (cached) no checking for shl_load in -ldld... (cached) no checking for dlopen in -ldl... no checking for dlerror... yes checking for i386-pc-dragonfly-ranlib... ranlib checking whether compiler accepts -fhuge-objects... no configure: With aio configure: Store modules built: ufs diskd configure: Enabling Blocking DiskIO module (required default) configure: Enabling Blocking DiskIO module configure: "adding DiskDaemon, as it is used by an active, legacy Store Module configure: IO Modules built: Blocking DiskDaemon checking for aio_read in -lrt... no checking for aio_read in -laio... no configure: Removal policies built: lru heap configure: ICMP enabled configure: Delay pools enabled checking whether to support eCAP... no, implicitly configure: Cachemgr default hostname set to localhost configure: SSL gatewaying using OpenSSL enabled configure: Using OpenSSL MD5 implementation configure: WARNING: Forcing poll() to be enabled checking for epoll_ctl in -lepoll... no checking for epoll_ctl... no checking sys/epoll.h usability... no checking sys/epoll.h presence... no checking for sys/epoll.h... no configure: Auth scheme modules built: basic digest ntlm configure: Basic auth helpers built: getpwnam MSNT NCSA YP PAM configure: NTLM auth helpers built: fakeauth configure: Digest auth helpers built: password configure: External acl helpers built: ip_user unix_group configure: unlinkd enabled checking for cppunit-config... false configure: WARNING: cppunit does not appear to be installed. squid does not require this, but code testing with 'make check' will fail. checking how to run the C preprocessor... cc -E checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether ln -s works... yes checking for sh... /scratch/www/squid31/work/.tools/bin/sh checking for false... (cached) /usr/bin/false checking for true... (cached) /usr/bin/true checking for mv... /bin/mv checking for mkdir... /bin/mkdir -p checking for ln... /bin/ln checking for rm... /bin/rm checking for egrep... (cached) /usr/bin/egrep checking for perl... /usr/pkg/bin/perl checking for ar... /usr/bin/ar checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking for ANSI C header files... (cached) yes checking aio.h usability... yes checking aio.h presence... yes checking for aio.h... yes checking arpa/inet.h usability... yes checking arpa/inet.h presence... yes checking for arpa/inet.h... yes checking arpa/nameser.h usability... yes checking arpa/nameser.h presence... yes checking for arpa/nameser.h... yes checking assert.h usability... yes checking assert.h presence... yes checking for assert.h... yes checking bstring.h usability... no checking bstring.h presence... no checking for bstring.h... no checking cassert usability... yes checking cassert presence... yes checking for cassert... yes checking crypt.h usability... no checking crypt.h presence... no checking for crypt.h... no checking cstring usability... yes checking cstring presence... yes checking for cstring... yes checking ctype.h usability... yes checking ctype.h presence... yes checking for ctype.h... yes checking errno.h usability... yes checking errno.h presence... yes checking for errno.h... yes checking execinfo.h usability... no checking execinfo.h presence... no checking for execinfo.h... no checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking fnmatch.h usability... yes checking fnmatch.h presence... yes checking for fnmatch.h... yes checking getopt.h usability... yes checking getopt.h presence... yes checking for getopt.h... yes checking glob.h usability... yes checking glob.h presence... yes checking for glob.h... yes checking gnumalloc.h usability... no checking gnumalloc.h presence... no checking for gnumalloc.h... no checking grp.h usability... yes checking grp.h presence... yes checking for grp.h... yes checking iosfwd usability... yes checking iosfwd presence... yes checking for iosfwd... yes checking iomanip usability... yes checking iomanip presence... yes checking for iomanip... yes checking iostream usability... yes checking iostream presence... yes checking for iostream... yes checking ip_compat.h usability... no checking ip_compat.h presence... no checking for ip_compat.h... no checking ip_fil_compat.h usability... no checking ip_fil_compat.h presence... no checking for ip_fil_compat.h... no checking ip_fil.h usability... no checking ip_fil.h presence... no checking for ip_fil.h... no checking ip_nat.h usability... no checking ip_nat.h presence... no checking for ip_nat.h... no checking ipl.h usability... no checking ipl.h presence... no checking for ipl.h... no checking libc.h usability... no checking libc.h presence... no checking for libc.h... no checking libgen.h usability... yes checking libgen.h presence... yes checking for libgen.h... yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking machine/byte_swap.h usability... no checking machine/byte_swap.h presence... no checking for machine/byte_swap.h... no checking malloc.h usability... yes checking malloc.h presence... yes checking for malloc.h... yes checking math.h usability... yes checking math.h presence... yes checking for math.h... yes checking for memory.h... (cached) yes checking mount.h usability... no checking mount.h presence... no checking for mount.h... no checking netdb.h usability... yes checking netdb.h presence... yes checking for netdb.h... yes checking netinet/in.h usability... yes checking netinet/in.h presence... yes checking for netinet/in.h... yes checking netinet/in_systm.h usability... yes checking netinet/in_systm.h presence... yes checking for netinet/in_systm.h... yes checking netinet/ip_fil_compat.h usability... no checking netinet/ip_fil_compat.h presence... no checking for netinet/ip_fil_compat.h... no checking openssl/err.h usability... yes checking openssl/err.h presence... yes checking for openssl/err.h... yes checking openssl/md5.h usability... yes checking openssl/md5.h presence... yes checking for openssl/md5.h... yes checking openssl/ssl.h usability... yes checking openssl/ssl.h presence... yes checking for openssl/ssl.h... yes checking netinet/tcp.h usability... yes checking netinet/tcp.h presence... yes checking for netinet/tcp.h... yes checking openssl/engine.h usability... yes checking openssl/engine.h presence... yes checking for openssl/engine.h... yes checking ostream usability... yes checking ostream presence... yes checking for ostream... yes checking paths.h usability... yes checking paths.h presence... yes checking for paths.h... yes checking poll.h usability... yes checking poll.h presence... yes checking for poll.h... yes checking pwd.h usability... yes checking pwd.h presence... yes checking for pwd.h... yes checking shadow.h usability... no checking shadow.h presence... no checking for shadow.h... no checking regex.h usability... yes checking regex.h presence... yes checking for regex.h... yes checking sched.h usability... yes checking sched.h presence... yes checking for sched.h... yes checking signal.h usability... yes checking signal.h presence... yes checking for signal.h... yes checking sstream usability... yes checking sstream presence... yes checking for sstream... yes checking stdarg.h usability... yes checking stdarg.h presence... yes checking for stdarg.h... yes checking stddef.h usability... yes checking stddef.h presence... yes checking for stddef.h... yes checking stdexcept usability... yes checking stdexcept presence... yes checking for stdexcept... yes checking stdio.h usability... yes checking stdio.h presence... yes checking for stdio.h... yes checking for stdlib.h... (cached) yes checking string usability... yes checking string presence... yes checking for string... yes checking for string.h... (cached) yes checking for strings.h... (cached) yes checking sys/bitypes.h usability... no checking sys/bitypes.h presence... no checking for sys/bitypes.h... no checking sys/bswap.h usability... no checking sys/bswap.h presence... no checking for sys/bswap.h... no checking sys/endian.h usability... yes checking sys/endian.h presence... yes checking for sys/endian.h... yes checking sys/file.h usability... yes checking sys/file.h presence... yes checking for sys/file.h... yes checking sys/ioctl.h usability... yes checking sys/ioctl.h presence... yes checking for sys/ioctl.h... yes checking sys/param.h usability... yes checking sys/param.h presence... yes checking for sys/param.h... yes checking sys/prctl.h usability... no checking sys/prctl.h presence... no checking for sys/prctl.h... no checking sys/md5.h usability... yes checking sys/md5.h presence... yes checking for sys/md5.h... yes checking sys/msg.h usability... yes checking sys/msg.h presence... yes checking for sys/msg.h... yes checking sys/resource.h usability... yes checking sys/resource.h presence... yes checking for sys/resource.h... yes checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking for sys/stat.h... (cached) yes checking sys/statvfs.h usability... yes checking sys/statvfs.h presence... yes checking for sys/statvfs.h... yes checking syscall.h usability... no checking syscall.h presence... no checking for syscall.h... no checking sys/syscall.h usability... yes checking sys/syscall.h presence... yes checking for sys/syscall.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking for sys/types.h... (cached) yes checking sys/un.h usability... yes checking sys/un.h presence... yes checking for sys/un.h... yes checking sys/vfs.h usability... no checking sys/vfs.h presence... no checking for sys/vfs.h... no checking sys/wait.h usability... yes checking sys/wait.h presence... yes checking for sys/wait.h... yes checking syslog.h usability... yes checking syslog.h presence... yes checking for syslog.h... yes checking time.h usability... yes checking time.h presence... yes checking for time.h... yes checking for unistd.h... (cached) yes checking utime.h usability... yes checking utime.h presence... yes checking for utime.h... yes checking varargs.h usability... yes checking varargs.h presence... yes checking for varargs.h... yes checking byteswap.h usability... no checking byteswap.h presence... no checking for byteswap.h... no checking glib.h usability... no checking glib.h presence... no checking for glib.h... no checking for stdint.h... (cached) yes checking for inttypes.h... (cached) yes checking for grp.h... (cached) yes checking db.h usability... yes checking db.h presence... yes checking for db.h... yes checking db_185.h usability... no checking db_185.h presence... no checking for db_185.h... no checking sys/capability.h usability... no checking sys/capability.h presence... no checking for sys/capability.h... no checking for linux/netfilter_ipv4.h... no checking for linux/netfilter_ipv4/ip_tproxy.h... no checking for net/if.h... yes checking for netinet/if_ether.h... yes checking for netinet/icmp6.h... yes checking for netinet/in.h... (cached) yes checking for netinet/ip.h... yes checking for netinet/ip6.h... yes checking for netinet/ip_compat.h... no checking for netinet/ip_fil_compat.h... (cached) no checking for netinet/ip_fil.h... no checking for netinet/ip_icmp.h... yes checking for netinet/ipl.h... no checking for netinet/ip_nat.h... no checking for net/pf/pfvar.h... no checking for net/pfvar.h... no checking for sys/mount.h... yes checking for resolv.h... yes checking libxml/parser.h usability... no checking libxml/parser.h presence... no checking for libxml/parser.h... no checking libxml/parser.h usability... no checking libxml/parser.h presence... no checking for libxml/parser.h... no checking for an ANSI C-conforming const... yes checking whether byte ordering is bigendian... no checking whether struct tm is in sys/time.h or time.h... time.h checking for struct tm.tm_gmtoff... yes checking for struct mallinfo... no checking for struct mallinfo.mxfast... no checking for struct rusage... yes checking for struct iphdr.ip_hl... yes checking size of void *... 4 checking for int8_t... yes checking size of int8_t... 1 checking for char... yes checking size of char... 1 checking for u_int8_t... yes checking size of u_int8_t... 1 checking for uint8_t... yes checking size of uint8_t... 1 checking for int16_t... yes checking size of int16_t... 2 checking for short... yes checking size of short... 2 checking for int... yes checking size of int... 4 checking for u_int16_t... yes checking size of u_int16_t... 2 checking for uint16_t... yes checking size of uint16_t... 2 checking for int32_t... yes checking size of int32_t... 4 checking for long... yes checking size of long... 4 checking for u_int32_t... yes checking size of u_int32_t... 4 checking for uint32_t... yes checking size of uint32_t... 4 checking for int64_t... yes checking size of int64_t... 8 checking for __int64... no checking for long long... yes checking size of long long... 8 checking for u_int64_t... yes checking size of u_int64_t... 8 checking for uint64_t... yes checking size of uint64_t... 8 checking for pad128_t... no checking for upad128_t... no checking for pid_t... yes checking for size_t... yes checking size of size_t... 4 checking for ssize_t... yes checking for off_t... yes checking size of off_t... 8 checking for mode_t... yes checking for fd_mask... yes checking for working alloca.h... no checking for alloca... yes checking for socklen_t... yes checking for mtyp_t... no checking for main in -lnsl... no checking for main in -lsocket... no checking for unix domain sockets... yes checking for main in -lgnumalloc... no checking for main in -lmalloc... no checking for main in -lbsd... no checking for main in -lregex... no checking for gethostbyname in -lbind... no checking for main in -lresolv... no checking for main in -lm... yes checking whether to enable IPv6... yes checking if PF_INET6 is available... yes checking for IPv6 split-stack requirement... no checking for IPv6 v4-mapping ability... yes checking for IPv6 stack type/mode... mapping hybrid checking for sin6_len field in struct sockaddr_in6... yes checking for ss_len field in struct sockaddr_storage... yes checking for sin_len field in struct sockaddr_in... yes checking for crypt in -lcrypt... yes checking for MD5Init in -lmd5... no checking for main in -llber... no checking if dbopen needs -ldb... no checking for backtrace_symbols_fd... no checking for bcopy... yes checking for bswap_16... no checking for bswap_32... no checking for bswap16... no checking for bswap32... no checking for fchmod... yes checking for getdtablesize... yes checking for getpagesize... yes checking for getpass... yes checking for getrlimit... yes checking for getrusage... yes checking for getspnam... no checking for gettimeofday... yes checking for glob... yes checking for htobe16... no checking for htole16... no checking for kqueue... yes checking for lrand48... yes checking for mallinfo... no checking for mallocblksize... no checking for mallopt... no checking for memcpy... yes checking for memmove... yes checking for memset... yes checking for mkstemp... yes checking for mktime... yes checking for mstats... no checking for poll... yes checking for prctl... no checking for pthread_attr_setschedparam... yes checking for pthread_attr_setscope... yes checking for pthread_setschedparam... yes checking for pthread_sigmask... yes checking for putenv... yes checking for random... yes checking for regcomp... yes checking for regexec... yes checking for regfree... yes checking for res_init... yes checking for __res_init... yes checking for rint... yes checking for sbrk... yes checking for select... yes checking for seteuid... yes checking for setgroups... yes checking for setpgrp... yes checking for setrlimit... yes checking for setsid... yes checking for sigaction... yes checking for snprintf... yes checking for socketpair... yes checking for srand48... yes checking for srandom... yes checking for statfs... yes checking for sysconf... yes checking for syslog... yes checking for timegm... yes checking for vsnprintf... yes checking for drand48... yes checking for inet_ntop... yes checking for inet_pton... yes checking for initgroups... yes checking for getaddrinfo... yes checking for getnameinfo... yes checking for strerror... yes checking for strsep... yes checking for strtoll... yes checking for tempnam... yes checking for crypt... yes configure: Using poll for the IO loop. checking if setresuid is implemented... no checking if strnstr is well implemented... no checking if va_copy is implemented... yes checking if __va_copy is implemented... yes checking if GNUregex needs to be compiled... no checking Default FD_SETSIZE value... 1024 checking Maximum number of filedescriptors we can open... 11072 checking Default UDP send buffer size... 9216 checking Default UDP receive buffer size... 42080 checking Default TCP send buffer size... 57344 configure: Limiting send buffer size to 32K checking Default TCP receive buffer size... 57344 checking if sys_errlist is already defined... yes checking for libresolv _dns_ttl_ hack... yes checking for working statvfs() interface... yes checking for _res_ext.nsaddr_list... no checking for _res._u._ext.nsaddrs... no checking for _res.nsaddr_list... yes checking for _res.ns_list... no checking whether po2html executable path has been provided... no checking for po2html... no configure: Enabling Multi-Language Support configure: creating ./config.status config.status: creating Makefile config.status: creating compat/Makefile config.status: creating lib/Makefile config.status: creating scripts/Makefile config.status: creating scripts/RunCache config.status: creating scripts/RunAccel config.status: creating src/Makefile config.status: creating src/base/Makefile config.status: creating src/acl/Makefile config.status: creating src/fs/Makefile config.status: creating src/repl/Makefile config.status: creating src/auth/Makefile config.status: creating src/adaptation/Makefile config.status: creating src/adaptation/icap/Makefile config.status: creating src/adaptation/ecap/Makefile config.status: creating src/esi/Makefile config.status: creating src/icmp/Makefile config.status: creating src/ident/Makefile config.status: creating src/ip/Makefile config.status: creating contrib/Makefile config.status: creating snmplib/Makefile config.status: creating icons/Makefile config.status: creating errors/Makefile config.status: creating test-suite/Makefile config.status: creating doc/Makefile config.status: creating helpers/Makefile config.status: creating helpers/basic_auth/Makefile config.status: creating helpers/basic_auth/LDAP/Makefile config.status: creating helpers/basic_auth/MSNT/Makefile config.status: creating helpers/basic_auth/NCSA/Makefile config.status: creating helpers/basic_auth/PAM/Makefile config.status: creating helpers/basic_auth/SMB/Makefile config.status: creating helpers/basic_auth/mswin_sspi/Makefile config.status: creating helpers/basic_auth/YP/Makefile config.status: creating helpers/basic_auth/getpwnam/Makefile config.status: creating helpers/basic_auth/multi-domain-NTLM/Makefile config.status: creating helpers/basic_auth/SASL/Makefile config.status: creating helpers/basic_auth/POP3/Makefile config.status: creating helpers/basic_auth/DB/Makefile config.status: creating helpers/basic_auth/squid_radius_auth/Makefile config.status: creating helpers/digest_auth/Makefile config.status: creating helpers/digest_auth/password/Makefile config.status: creating helpers/digest_auth/ldap/Makefile config.status: creating helpers/digest_auth/eDirectory/Makefile config.status: creating helpers/ntlm_auth/Makefile config.status: creating helpers/ntlm_auth/fakeauth/Makefile config.status: creating helpers/ntlm_auth/no_check/Makefile config.status: creating helpers/ntlm_auth/smb_lm/Makefile config.status: creating helpers/ntlm_auth/smb_lm/smbval/Makefile config.status: creating helpers/ntlm_auth/mswin_sspi/Makefile config.status: creating helpers/negotiate_auth/Makefile config.status: creating helpers/negotiate_auth/mswin_sspi/Makefile config.status: creating helpers/external_acl/Makefile config.status: creating helpers/external_acl/ip_user/Makefile config.status: creating helpers/external_acl/ldap_group/Makefile config.status: creating helpers/external_acl/session/Makefile config.status: creating helpers/external_acl/unix_group/Makefile config.status: creating helpers/external_acl/wbinfo_group/Makefile config.status: creating helpers/external_acl/mswin_ad_group/Makefile config.status: creating helpers/external_acl/mswin_lm_group/Makefile config.status: creating tools/Makefile config.status: creating include/autoconf.h config.status: executing depfiles commands === configuring in helpers/negotiate_auth/squid_kerb_auth (/scratch/www/squid31/work/squid-3.1.0.9/helpers/negotiate_auth/squid_kerb_auth) configure: running /bin/sh ./configure --disable-option-checking '--prefix=/usr/pkg' '--sysconfdir=/usr/pkg/etc/squid' '--localstatedir=/var/squid' '--datarootdir=/usr/pkg/share/squid' '--enable-auth=basic,digest,ntlm' '--enable-cachemgr-hostname=localhost' '--enable-delay-pools' '--enable-icmp' '--enable-removal-policies=lru,heap' '--enable-poll' '--enable-underscores' '--enable-storeio=ufs diskd' '--with-aio' '--with-default-user=squid' '--with-pidfile=/var/run/squid.pid' '--enable-carp' '--enable-snmp' '--enable-ssl' '--with-openssl=/usr' '--enable-basic-auth-helpers=getpwnam MSNT NCSA YP PAM' '--enable-digest-auth-helpers=password' '--enable-ntlm-auth-helpers=fakeauth' '--enable-external-acl-helpers=ip_user unix_group' '--host=i386-pc-dragonfly' '--mandir=/usr/pkg/man' 'host_alias=i386-pc-dragonfly' 'CC=cc' 'CFLAGS=-O2 -I/usr/include' 'LDFLAGS=-L/usr/lib -Wl,-R/usr/lib -Wl,-R/usr/pkg/lib' 'LIBS=' 'CPPFLAGS=-I/usr/include' 'CXX=c++' 'CXXFLAGS=-O2 -I/usr/include' 'F77=f77' 'FFLAGS=-O' '--with-squid=/scratch/www/squid31/work/squid-3.1.0.9' '--enable-ltdl-convenience' --cache-file=/dev/null --srcdir=. configure: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used. checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether build environment is sane... yes checking for a thread-safe mkdir -p... ./install-sh -c -d checking for gawk... /usr/bin/awk checking whether make sets $(MAKE)... yes checking for i386-pc-dragonfly-strip... no checking for strip... strip checking for i386-pc-dragonfly-gcc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of cc... gcc3 checking how to run the C preprocessor... cc -E checking for krb5-config... no krb5-config: not found krb5-config: not found checking for main in -lresolv... no checking for main in -lcom_err... yes checking for main in -ldes425... no checking for main in -lk5crypto... no checking for main in -lkrb5... no checking for main in -lgssapi_krb5... no checking gssapi.h usability... no checking gssapi.h presence... no checking for gssapi.h... no checking gssapi/gssapi.h usability... no checking gssapi/gssapi.h presence... no checking for gssapi/gssapi.h... no checking gssapi/gssapi_krb5.h usability... no checking gssapi/gssapi_krb5.h presence... no checking for gssapi/gssapi_krb5.h... no checking gssapi/gssapi_generic.h usability... no checking gssapi/gssapi_generic.h presence... no checking for gssapi/gssapi_generic.h... no checking for SPNEGO support... no checking whether byte ordering is bigendian... no checking errno.h usability... yes checking errno.h presence... yes checking for errno.h... yes checking netdb.h usability... yes checking netdb.h presence... yes checking for netdb.h... yes checking stdio.h usability... yes checking stdio.h presence... yes checking for stdio.h... yes checking stdlib.h usability... yes checking stdlib.h presence... yes checking for stdlib.h... yes checking string.h usability... yes checking string.h presence... yes checking for string.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking time.h usability... yes checking time.h presence... yes checking for time.h... yes checking unistd.h usability... yes checking unistd.h presence... yes checking for unistd.h... yes checking for SQUID at '/scratch/www/squid31/work/squid-3.1.0.9' ... yes checking getaddrinfo.h usability... yes checking getaddrinfo.h presence... yes checking for getaddrinfo.h... yes checking getnameinfo.h usability... yes checking getnameinfo.h presence... yes checking for getnameinfo.h... yes checking util.h usability... yes checking util.h presence... yes checking for util.h... yes checking whether xgetaddrinfo is declared... yes checking whether xfreeaddrinfo is declared... yes checking whether xgai_strerror is declared... yes checking whether xgetnameinfo is declared... yes checking whether xstrdup is declared... yes checking whether xmalloc is declared... yes checking whether xfree is declared... yes checking for main in -lm... no checking for main in -lmw... no configure: ## -----------------------------## configure: ## configure: ## mit has been selected configure: ## configure: ## -----------------------------## configure: creating ./config.status config.status: creating Makefile config.status: creating ska_config.h config.status: executing depfiles commands configure: updating ska_config.h === configuring in lib/libTrie (/scratch/www/squid31/work/squid-3.1.0.9/lib/libTrie) configure: running /bin/sh ./configure --disable-option-checking '--prefix=/usr/pkg' '--sysconfdir=/usr/pkg/etc/squid' '--localstatedir=/var/squid' '--datarootdir=/usr/pkg/share/squid' '--enable-auth=basic,digest,ntlm' '--enable-cachemgr-hostname=localhost' '--enable-delay-pools' '--enable-icmp' '--enable-removal-policies=lru,heap' '--enable-poll' '--enable-underscores' '--enable-storeio=ufs diskd' '--with-aio' '--with-default-user=squid' '--with-pidfile=/var/run/squid.pid' '--enable-carp' '--enable-snmp' '--enable-ssl' '--with-openssl=/usr' '--enable-basic-auth-helpers=getpwnam MSNT NCSA YP PAM' '--enable-digest-auth-helpers=password' '--enable-ntlm-auth-helpers=fakeauth' '--enable-external-acl-helpers=ip_user unix_group' '--host=i386-pc-dragonfly' '--mandir=/usr/pkg/man' 'host_alias=i386-pc-dragonfly' 'CC=cc' 'CFLAGS=-O2 -I/usr/include' 'LDFLAGS=-L/usr/lib -Wl,-R/usr/lib -Wl,-R/usr/pkg/lib' 'LIBS=' 'CPPFLAGS=-I/usr/include' 'CXX=c++' 'CXXFLAGS=-O2 -I/usr/include' 'F77=f77' 'FFLAGS=-O' '--with-squid=/scratch/www/squid31/work/squid-3.1.0.9' '--enable-ltdl-convenience' --cache-file=/dev/null --srcdir=. configure: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used. checking for C++ compiler default output file name... a.out checking whether the C++ compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C++ compiler... yes checking whether c++ accepts -g... yes checking for i386-pc-dragonfly-gcc... cc checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking whether make sets $(MAKE)... yes checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether build environment is sane... yes checking for a thread-safe mkdir -p... cfgaux/install-sh -c -d checking for gawk... /usr/bin/awk checking for style of include used by make... GNU checking dependency style of cc... gcc3 checking dependency style of c++... gcc3 checking whether to enable maintainer-specific portions of Makefiles... no checking for i386-pc-dragonfly-ranlib... no checking for ranlib... ranlib checking whether compiler accepts -fhuge-objects... no checking how to run the C++ preprocessor... c++ -E checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking iostream usability... yes checking iostream presence... yes checking for iostream... yes checking for an ANSI C-conforming const... yes checking for size_t... yes configure: creating ./config.status config.status: creating Makefile config.status: creating include/Makefile config.status: creating src/Makefile config.status: creating test/Makefile config.status: creating config.h config.status: executing depfiles commands === configuring in lib/libLtdl (/scratch/www/squid31/work/squid-3.1.0.9/lib/libLtdl) configure: running /bin/sh ./configure --disable-option-checking '--prefix=/usr/pkg' '--sysconfdir=/usr/pkg/etc/squid' '--localstatedir=/var/squid' '--datarootdir=/usr/pkg/share/squid' '--enable-auth=basic,digest,ntlm' '--enable-cachemgr-hostname=localhost' '--enable-delay-pools' '--enable-icmp' '--enable-removal-policies=lru,heap' '--enable-poll' '--enable-underscores' '--enable-storeio=ufs diskd' '--with-aio' '--with-default-user=squid' '--with-pidfile=/var/run/squid.pid' '--enable-carp' '--enable-snmp' '--enable-ssl' '--with-openssl=/usr' '--enable-basic-auth-helpers=getpwnam MSNT NCSA YP PAM' '--enable-digest-auth-helpers=password' '--enable-ntlm-auth-helpers=fakeauth' '--enable-external-acl-helpers=ip_user unix_group' '--host=i386-pc-dragonfly' '--mandir=/usr/pkg/man' 'host_alias=i386-pc-dragonfly' 'CC=cc' 'CFLAGS=-O2 -I/usr/include' 'LDFLAGS=-L/usr/lib -Wl,-R/usr/lib -Wl,-R/usr/pkg/lib' 'LIBS=' 'CPPFLAGS=-I/usr/include' 'CXX=c++' 'CXXFLAGS=-O2 -I/usr/include' 'F77=f77' 'FFLAGS=-O' '--with-squid=/scratch/www/squid31/work/squid-3.1.0.9' '--enable-ltdl-convenience' --cache-file=/dev/null --srcdir=. configure: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used. checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether build environment is sane... yes checking for a thread-safe mkdir -p... ./install-sh -c -d checking for gawk... /usr/bin/awk checking whether make sets $(MAKE)... yes checking for i386-pc-dragonfly-strip... no checking for strip... strip checking for i386-pc-dragonfly-gcc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of cc... none checking for an ANSI C-conforming const... yes checking for inline... inline checking build system type... i386-unknown-dragonfly2.3.1 checking host system type... i386-pc-dragonfly checking for a sed that does not truncate output... /scratch/www/squid31/work/.tools/bin/sed checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for ld used by cc... /scratch/www/squid31/work/.wrapper/bin/ld checking if the linker (/scratch/www/squid31/work/.wrapper/bin/ld) is GNU ld... yes checking for /scratch/www/squid31/work/.wrapper/bin/ld option to reload object files... -r checking for BSD-compatible nm... nm checking whether ln -s works... yes checking how to recognize dependent libraries... pass_all checking how to run the C preprocessor... cc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking whether we are using the GNU C++ compiler... yes checking whether c++ accepts -g... yes checking dependency style of c++... none checking how to run the C++ preprocessor... c++ -E checking for i386-pc-dragonfly-g77... f77 checking whether we are using the GNU Fortran 77 compiler... no checking whether f77 accepts -g... no checking the maximum length of command line arguments... 196608 checking command to parse nm output from cc object... ok checking for objdir... .libs checking for i386-pc-dragonfly-ar... no checking for ar... ar checking for i386-pc-dragonfly-ranlib... no checking for ranlib... ranlib checking for i386-pc-dragonfly-strip... strip checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC checking if cc PIC flag -fPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking whether the cc linker (/scratch/www/squid31/work/.wrapper/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by c++... /scratch/www/squid31/work/.wrapper/bin/ld checking if the linker (/scratch/www/squid31/work/.wrapper/bin/ld) is GNU ld... yes checking whether the c++ linker (/scratch/www/squid31/work/.wrapper/bin/ld) supports shared libraries... yes checking for c++ option to produce PIC... -fPIC checking if c++ PIC flag -fPIC works... yes checking if c++ static flag -static works... yes checking if c++ supports -c -o file.o... yes checking whether the c++ linker (/scratch/www/squid31/work/.wrapper/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly ld.so (cached) (cached) checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for f77 option to produce PIC... -fPIC checking if f77 PIC flag -fPIC works... no checking if f77 static flag -static works... no checking if f77 supports -c -o file.o... no checking whether the f77 linker (/scratch/www/squid31/work/.wrapper/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly ld.so (cached) (cached) checking how to hardcode library paths into programs... immediate checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking which extension is used for loadable modules... .so checking which variable specifies run-time library path... LD_LIBRARY_PATH checking for the default library search path... /lib /usr/lib checking for objdir... .libs checking whether libtool supports -dlopen/-dlpreopen... yes checking for shl_load... no checking for shl_load in -ldld... no checking for dlopen in -ldl... no checking for dlerror... yes checking for _ prefix in compiled symbols... no checking whether deplibs are loaded by dlopen... yes checking argz.h usability... no checking argz.h presence... no checking for argz.h... no checking for error_t... no checking for argz_append... no checking for argz_create_sep... no checking for argz_insert... no checking for argz_next... no checking for argz_stringify... no checking assert.h usability... yes checking assert.h presence... yes checking for assert.h... yes checking ctype.h usability... yes checking ctype.h presence... yes checking for ctype.h... yes checking errno.h usability... yes checking errno.h presence... yes checking for errno.h... yes checking malloc.h usability... yes checking malloc.h presence... yes checking for malloc.h... yes checking for memory.h... (cached) yes checking for stdlib.h... (cached) yes checking stdio.h usability... yes checking stdio.h presence... yes checking for stdio.h... yes checking for unistd.h... (cached) yes checking dl.h usability... no checking dl.h presence... no checking for dl.h... no checking sys/dl.h usability... no checking sys/dl.h presence... no checking for sys/dl.h... no checking dld.h usability... no checking dld.h presence... no checking for dld.h... no checking mach-o/dyld.h usability... no checking mach-o/dyld.h presence... no checking for mach-o/dyld.h... no checking for string.h... (cached) yes checking for strchr... yes checking for strrchr... yes checking for memcpy... yes checking for memmove... yes checking for strcmp... yes checking for closedir... yes checking for opendir... yes checking for readdir... yes configure: creating ./config.status config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands WARNING: *** Please consider adding fortran to USE_LANGUAGES in the package Makefile.