=> Bootstrap dependency digest>=20010302: found digest-20080510
=> Checksum SHA1 OK for squid-3.1.0.8.tar.bz2
=> Checksum RMD160 OK for squid-3.1.0.8.tar.bz2
===> Installing dependencies for squid-3.1.0.8
==========================================================================
The supported build options for squid are:

	snmp squid-backend-aufs squid-backend-diskd
	squid-backend-null squid-backend-ufs squid-carp
	squid-ipf squid-ldap-helper squid-pam-helper
	squid-pf squid-unlinkd ssl

The currently selected options are:

	snmp squid-backend-diskd squid-carp squid-pam-helper
	squid-unlinkd ssl

You can select which build options to use by setting PKG_DEFAULT_OPTIONS
or the following variable.  Its current value is shown:

	PKG_OPTIONS.squid (not defined)

==========================================================================
==========================================================================
The following variables will affect the build process of this package,
squid-3.1.0.8.  Their current value is shown below:

        * LOGDIR = /var/squid/logs
        * PAM_DEFAULT = openpam
        * SSLBASE = /usr
        * SSLCERTS = /etc/ssl/certs
        * SSLDIR = /etc/ssl
        * SSLKEYS = /etc/ssl/private
        * VARBASE = /var

Based on these variables, the following variables have been set:

        * PAMBASE (defined, but empty)
        * PAM_TYPE = openpam

You may want to abort the process now with CTRL-C and change their value
before continuing.  Be sure to run `/usr/pkg/bin/bmake clean' after
the changes.
==========================================================================
=> Build dependency gmake>=3.81: found gmake-3.81
=> Build dependency perl>=5.0: found perl-5.10.0nb6
=> Build dependency checkperms>=1.1: found checkperms-1.10
===> Overriding tools for squid-3.1.0.8
===> Extracting for squid-3.1.0.8
===> Patching for squid-3.1.0.8
=> Applying pkgsrc patches for squid-3.1.0.8
===> Creating toolchain wrappers for squid-3.1.0.8
===> Configuring for squid-3.1.0.8
=> Fixing configuration files.
INFO: [subst.mk:confs] Nothing changed in ./src/cf.data.pre.
=> Modifying GNU configure scripts to avoid --recheck
=> Replacing config-guess with pkgsrc versions
=> Replacing config-sub with pkgsrc versions
=> Replacing install-sh with pkgsrc version
=> Checking for portability problems in extracted files
configure: WARNING: If you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used.
checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... cfgaux/install-sh -c -d
checking for gawk... /usr/bin/awk
checking whether make sets $(MAKE)... yes
checking for i386-pc-dragonfly-strip... no
checking for strip... strip
checking how to create a ustar tar archive... gnutar
checking whether to enable maintainer-specific portions of Makefiles... no
checking for i386-pc-dragonfly-gcc... cc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables... 
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether cc accepts -g... yes
checking for cc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of cc... gcc3
checking whether cc understands -c and -o together... yes
checking whether we are using the GNU C++ compiler... yes
checking whether c++ accepts -g... yes
checking dependency style of c++... gcc3
checking build system type... i386-unknown-dragonfly2.3.1
checking host system type... i386-pc-dragonfly
checking whether to use loadable modules... yes, implicitly
checking for a sed that does not truncate output... /scratch/www/squid31/work/.tools/bin/sed
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... (cached) /usr/bin/egrep
checking for ld used by cc... /scratch/www/squid31/work/.wrapper/bin/ld
checking if the linker (/scratch/www/squid31/work/.wrapper/bin/ld) is GNU ld... yes
checking for /scratch/www/squid31/work/.wrapper/bin/ld option to reload object files... -r
checking for BSD-compatible nm... nm
checking whether ln -s works... yes
checking how to recognize dependent libraries... pass_all
checking how to run the C preprocessor... cc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking how to run the C++ preprocessor... c++ -E
checking for i386-pc-dragonfly-g77... f77
checking whether we are using the GNU Fortran 77 compiler... no
checking whether f77 accepts -g... no
checking the maximum length of command line arguments... 196608
checking command to parse nm output from cc object... ok
checking for objdir... .libs
checking for i386-pc-dragonfly-ar... no
checking for ar... ar
checking for i386-pc-dragonfly-ranlib... no
checking for ranlib... ranlib
checking for i386-pc-dragonfly-strip... strip
checking if cc supports -fno-rtti -fno-exceptions... no
checking for cc option to produce PIC... -fPIC
checking if cc PIC flag -fPIC works... yes
checking if cc static flag -static works... yes
checking if cc supports -c -o file.o... yes
checking whether the cc linker (/scratch/www/squid31/work/.wrapper/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... dragonfly ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking for shl_load... no
checking for shl_load in -ldld... no
checking for dlopen... yes
checking whether a program can dlopen itself... yes
checking whether a statically linked program can dlopen itself... no
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by c++... /scratch/www/squid31/work/.wrapper/bin/ld
checking if the linker (/scratch/www/squid31/work/.wrapper/bin/ld) is GNU ld... yes
checking whether the c++ linker (/scratch/www/squid31/work/.wrapper/bin/ld) supports shared libraries... yes
checking for c++ option to produce PIC... -fPIC
checking if c++ PIC flag -fPIC works... yes
checking if c++ static flag -static works... yes
checking if c++ supports -c -o file.o... yes
checking whether the c++ linker (/scratch/www/squid31/work/.wrapper/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... dragonfly ld.so
(cached) (cached) checking how to hardcode library paths into programs... immediate
appending configuration tag "F77" to libtool
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for f77 option to produce PIC... -fPIC
checking if f77 PIC flag -fPIC works... no
checking if f77 static flag -static works... no
checking if f77 supports -c -o file.o... no
checking whether the f77 linker (/scratch/www/squid31/work/.wrapper/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... dragonfly ld.so
(cached) (cached) checking how to hardcode library paths into programs... immediate
checking for shl_load... (cached) no
checking for shl_load in -ldld... (cached) no
checking for dlopen in -ldl... no
checking for dlerror... yes
checking for i386-pc-dragonfly-ranlib... ranlib
checking whether compiler accepts -fhuge-objects... no
configure: With aio
configure: Store modules built:  ufs diskd
configure: Enabling Blocking DiskIO module (required default)
configure: Enabling Blocking DiskIO module
configure: "adding DiskDaemon, as it is used by an active, legacy Store Module
configure: IO Modules built: Blocking DiskDaemon
checking for aio_read in -lrt... no
checking for aio_read in -laio... no
configure: Removal policies built: lru heap
configure: ICMP enabled
configure: Delay pools enabled
checking whether to support eCAP... no, implicitly
configure: Cachemgr default hostname set to localhost
configure: SSL gatewaying using OpenSSL enabled
configure: Using OpenSSL MD5 implementation
configure: WARNING: Forcing poll() to be enabled
checking for epoll_ctl in -lepoll... no
checking for epoll_ctl... no
checking sys/epoll.h usability... no
checking sys/epoll.h presence... no
checking for sys/epoll.h... no
configure: Auth scheme modules built: basic digest ntlm
configure: Basic auth helpers built: getpwnam MSNT NCSA YP PAM
configure: NTLM auth helpers built: fakeauth
configure: Digest auth helpers built: password
configure: External acl helpers built: ip_user unix_group
configure: unlinkd enabled
checking whether to enable IPv6... yes
checking if PF_INET6 is available... yes

checking for IPv6 split-stack requirement... no
checking for sin6_len field in struct sockaddr_in6... yes
checking for ss_len field in struct sockaddr_storage... yes
checking for sin_len field in struct sockaddr_in... yes
checking for cppunit-config... false
configure: WARNING: cppunit does not appear to be installed. squid does not require this, but code testing with 'make check' will fail.
checking how to run the C preprocessor... cc -E
checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel
checking whether ln -s works... yes
checking for sh... /scratch/www/squid31/work/.tools/bin/sh
checking for false... (cached) /usr/bin/false
checking for true... (cached) /usr/bin/true
checking for mv... /bin/mv
checking for mkdir... /bin/mkdir -p
checking for ln... /bin/ln
checking for rm... /bin/rm
checking for egrep... (cached) /usr/bin/egrep
checking for perl... /usr/pkg/bin/perl
checking for ar... /usr/bin/ar
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking for ANSI C header files... (cached) yes
checking arpa/inet.h usability... yes
checking arpa/inet.h presence... yes
checking for arpa/inet.h... yes
checking arpa/nameser.h usability... yes
checking arpa/nameser.h presence... yes
checking for arpa/nameser.h... yes
checking assert.h usability... yes
checking assert.h presence... yes
checking for assert.h... yes
checking bstring.h usability... no
checking bstring.h presence... no
checking for bstring.h... no
checking crypt.h usability... no
checking crypt.h presence... no
checking for crypt.h... no
checking ctype.h usability... yes
checking ctype.h presence... yes
checking for ctype.h... yes
checking errno.h usability... yes
checking errno.h presence... yes
checking for errno.h... yes
checking execinfo.h usability... no
checking execinfo.h presence... no
checking for execinfo.h... no
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking fnmatch.h usability... yes
checking fnmatch.h presence... yes
checking for fnmatch.h... yes
checking getopt.h usability... yes
checking getopt.h presence... yes
checking for getopt.h... yes
checking glob.h usability... yes
checking glob.h presence... yes
checking for glob.h... yes
checking gnumalloc.h usability... no
checking gnumalloc.h presence... no
checking for gnumalloc.h... no
checking grp.h usability... yes
checking grp.h presence... yes
checking for grp.h... yes
checking ip_compat.h usability... no
checking ip_compat.h presence... no
checking for ip_compat.h... no
checking ip_fil_compat.h usability... no
checking ip_fil_compat.h presence... no
checking for ip_fil_compat.h... no
checking ip_fil.h usability... no
checking ip_fil.h presence... no
checking for ip_fil.h... no
checking ip_nat.h usability... no
checking ip_nat.h presence... no
checking for ip_nat.h... no
checking ipl.h usability... no
checking ipl.h presence... no
checking for ipl.h... no
checking libc.h usability... no
checking libc.h presence... no
checking for libc.h... no
checking libgen.h usability... yes
checking libgen.h presence... yes
checking for libgen.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking machine/byte_swap.h usability... no
checking machine/byte_swap.h presence... no
checking for machine/byte_swap.h... no
checking malloc.h usability... yes
checking malloc.h presence... yes
checking for malloc.h... yes
checking math.h usability... yes
checking math.h presence... yes
checking for math.h... yes
checking for memory.h... (cached) yes
checking mount.h usability... no
checking mount.h presence... no
checking for mount.h... no
checking netdb.h usability... yes
checking netdb.h presence... yes
checking for netdb.h... yes
checking netinet/in.h usability... yes
checking netinet/in.h presence... yes
checking for netinet/in.h... yes
checking netinet/in_systm.h usability... yes
checking netinet/in_systm.h presence... yes
checking for netinet/in_systm.h... yes
checking netinet/ip_fil_compat.h usability... no
checking netinet/ip_fil_compat.h presence... no
checking for netinet/ip_fil_compat.h... no
checking openssl/err.h usability... yes
checking openssl/err.h presence... yes
checking for openssl/err.h... yes
checking openssl/md5.h usability... yes
checking openssl/md5.h presence... yes
checking for openssl/md5.h... yes
checking openssl/ssl.h usability... yes
checking openssl/ssl.h presence... yes
checking for openssl/ssl.h... yes
checking netinet/tcp.h usability... yes
checking netinet/tcp.h presence... yes
checking for netinet/tcp.h... yes
checking openssl/engine.h usability... yes
checking openssl/engine.h presence... yes
checking for openssl/engine.h... yes
checking paths.h usability... yes
checking paths.h presence... yes
checking for paths.h... yes
checking poll.h usability... yes
checking poll.h presence... yes
checking for poll.h... yes
checking pwd.h usability... yes
checking pwd.h presence... yes
checking for pwd.h... yes
checking shadow.h usability... no
checking shadow.h presence... no
checking for shadow.h... no
checking regex.h usability... yes
checking regex.h presence... yes
checking for regex.h... yes
checking sched.h usability... yes
checking sched.h presence... yes
checking for sched.h... yes
checking signal.h usability... yes
checking signal.h presence... yes
checking for signal.h... yes
checking stdarg.h usability... yes
checking stdarg.h presence... yes
checking for stdarg.h... yes
checking stddef.h usability... yes
checking stddef.h presence... yes
checking for stddef.h... yes
checking stdio.h usability... yes
checking stdio.h presence... yes
checking for stdio.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for strings.h... (cached) yes
checking sys/bitypes.h usability... no
checking sys/bitypes.h presence... no
checking for sys/bitypes.h... no
checking sys/bswap.h usability... no
checking sys/bswap.h presence... no
checking for sys/bswap.h... no
checking sys/endian.h usability... yes
checking sys/endian.h presence... yes
checking for sys/endian.h... yes
checking sys/file.h usability... yes
checking sys/file.h presence... yes
checking for sys/file.h... yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking sys/param.h usability... yes
checking sys/param.h presence... yes
checking for sys/param.h... yes
checking sys/prctl.h usability... no
checking sys/prctl.h presence... no
checking for sys/prctl.h... no
checking sys/md5.h usability... yes
checking sys/md5.h presence... yes
checking for sys/md5.h... yes
checking sys/msg.h usability... yes
checking sys/msg.h presence... yes
checking for sys/msg.h... yes
checking sys/resource.h usability... yes
checking sys/resource.h presence... yes
checking for sys/resource.h... yes
checking sys/select.h usability... yes
checking sys/select.h presence... yes
checking for sys/select.h... yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking for sys/stat.h... (cached) yes
checking sys/statvfs.h usability... yes
checking sys/statvfs.h presence... yes
checking for sys/statvfs.h... yes
checking syscall.h usability... no
checking syscall.h presence... no
checking for syscall.h... no
checking sys/syscall.h usability... yes
checking sys/syscall.h presence... yes
checking for sys/syscall.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking for sys/types.h... (cached) yes
checking sys/un.h usability... yes
checking sys/un.h presence... yes
checking for sys/un.h... yes
checking sys/vfs.h usability... no
checking sys/vfs.h presence... no
checking for sys/vfs.h... no
checking sys/wait.h usability... yes
checking sys/wait.h presence... yes
checking for sys/wait.h... yes
checking syslog.h usability... yes
checking syslog.h presence... yes
checking for syslog.h... yes
checking time.h usability... yes
checking time.h presence... yes
checking for time.h... yes
checking for unistd.h... (cached) yes
checking utime.h usability... yes
checking utime.h presence... yes
checking for utime.h... yes
checking varargs.h usability... yes
checking varargs.h presence... yes
checking for varargs.h... yes
checking byteswap.h usability... no
checking byteswap.h presence... no
checking for byteswap.h... no
checking glib.h usability... no
checking glib.h presence... no
checking for glib.h... no
checking for stdint.h... (cached) yes
checking for inttypes.h... (cached) yes
checking for grp.h... (cached) yes
checking db.h usability... yes
checking db.h presence... yes
checking for db.h... yes
checking db_185.h usability... no
checking db_185.h presence... no
checking for db_185.h... no
checking sys/capability.h usability... no
checking sys/capability.h presence... no
checking for sys/capability.h... no
checking for linux/netfilter_ipv4.h... no
checking for linux/netfilter_ipv4/ip_tproxy.h... no
checking for net/if.h... yes
checking for netinet/if_ether.h... yes
checking for netinet/icmp6.h... yes
checking for netinet/in.h... (cached) yes
checking for netinet/ip.h... yes
checking for netinet/ip6.h... yes
checking for netinet/ip_compat.h... no
checking for netinet/ip_fil_compat.h... (cached) no
checking for netinet/ip_fil.h... no
checking for netinet/ip_icmp.h... yes
checking for netinet/ipl.h... no
checking for netinet/ip_nat.h... no
checking for net/pf/pfvar.h... no
checking for net/pfvar.h... no
checking for sys/mount.h... yes
checking for resolv.h... yes
checking libxml/parser.h usability... no
checking libxml/parser.h presence... no
checking for libxml/parser.h... no
checking libxml/parser.h usability... no
checking libxml/parser.h presence... no
checking for libxml/parser.h... no
checking for an ANSI C-conforming const... yes
checking whether byte ordering is bigendian... no
checking whether struct tm is in sys/time.h or time.h... time.h
checking for struct tm.tm_gmtoff... yes
checking for struct mallinfo... no
checking for struct mallinfo.mxfast... no
checking for struct rusage... yes
checking for struct iphdr.ip_hl... yes
checking size of void *... 4
checking for int8_t... yes
checking size of int8_t... 1
checking for char... yes
checking size of char... 1
checking for u_int8_t... yes
checking size of u_int8_t... 1
checking for uint8_t... yes
checking size of uint8_t... 1
checking for int16_t... yes
checking size of int16_t... 2
checking for short... yes
checking size of short... 2
checking for int... yes
checking size of int... 4
checking for u_int16_t... yes
checking size of u_int16_t... 2
checking for uint16_t... yes
checking size of uint16_t... 2
checking for int32_t... yes
checking size of int32_t... 4
checking for long... yes
checking size of long... 4
checking for u_int32_t... yes
checking size of u_int32_t... 4
checking for uint32_t... yes
checking size of uint32_t... 4
checking for int64_t... yes
checking size of int64_t... 8
checking for __int64... no
checking for long long... yes
checking size of long long... 8
checking for u_int64_t... yes
checking size of u_int64_t... 8
checking for uint64_t... yes
checking size of uint64_t... 8
checking for pad128_t... no
checking for upad128_t... no
checking for pid_t... yes
checking for size_t... yes
checking size of size_t... 4
checking for ssize_t... yes
checking for off_t... yes
checking size of off_t... 8
checking for mode_t... yes
checking for fd_mask... yes
checking for working alloca.h... no
checking for alloca... yes
checking for socklen_t... yes
checking for mtyp_t... no
checking for main in -lnsl... no
checking for main in -lsocket... no
checking for unix domain sockets... yes
checking for main in -lgnumalloc... no
checking for main in -lmalloc... no
checking for main in -lbsd... no
checking for main in -lregex... no
checking for gethostbyname in -lbind... no
checking for main in -lresolv... no
checking for main in -lm... yes
checking for crypt in -lcrypt... yes
checking for MD5Init in -lmd5... no
checking for main in -llber... no
checking if dbopen needs -ldb... no
checking for backtrace_symbols_fd... no
checking for bcopy... yes
checking for bswap_16... no
checking for bswap_32... no
checking for bswap16... no
checking for bswap32... no
checking for fchmod... yes
checking for getdtablesize... yes
checking for getpagesize... yes
checking for getpass... yes
checking for getrlimit... yes
checking for getrusage... yes
checking for getspnam... no
checking for gettimeofday... yes
checking for glob... yes
checking for htobe16... no
checking for htole16... no
checking for kqueue... yes
checking for lrand48... yes
checking for mallinfo... no
checking for mallocblksize... no
checking for mallopt... no
checking for memcpy... yes
checking for memmove... yes
checking for memset... yes
checking for mkstemp... yes
checking for mktime... yes
checking for mstats... no
checking for poll... yes
checking for prctl... no
checking for pthread_attr_setschedparam... yes
checking for pthread_attr_setscope... yes
checking for pthread_setschedparam... yes
checking for pthread_sigmask... yes
checking for putenv... yes
checking for random... yes
checking for regcomp... yes
checking for regexec... yes
checking for regfree... yes
checking for res_init... yes
checking for __res_init... yes
checking for rint... yes
checking for sbrk... yes
checking for select... yes
checking for seteuid... yes
checking for setgroups... yes
checking for setpgrp... yes
checking for setrlimit... yes
checking for setsid... yes
checking for sigaction... yes
checking for snprintf... yes
checking for socketpair... yes
checking for srand48... yes
checking for srandom... yes
checking for statfs... yes
checking for strsep... yes
checking for strtoll... yes
checking for sysconf... yes
checking for syslog... yes
checking for timegm... yes
checking for vsnprintf... yes
checking for drand48... yes
checking for inet_ntop... yes
checking for inet_pton... yes
checking for initgroups... yes
checking for getaddrinfo... yes
checking for getnameinfo... yes
checking for strerror... yes
checking for tempnam... yes
checking for crypt... yes
configure: Using poll for the IO loop.
checking if setresuid is implemented... no
checking if strnstr is well implemented... no
checking if va_copy is implemented... yes
checking if __va_copy is implemented... yes
checking if GNUregex needs to be compiled... no
checking Default FD_SETSIZE value... 1024
checking Maximum number of filedescriptors we can open... 11072
checking Default UDP send buffer size... 16384
checking Default UDP receive buffer size... 16384
checking Default TCP send buffer size... 16384
checking Default TCP receive buffer size... 16384
checking if sys_errlist is already defined... yes
checking for libresolv _dns_ttl_ hack... yes
checking for working statvfs() interface... yes
checking for _res_ext.nsaddr_list... no
checking for _res._u._ext.nsaddrs... no
checking for _res.nsaddr_list... yes
checking for _res.ns_list... no
checking whether po2html executable path has been provided... no
checking for po2html... no
configure: Enabling Multi-Language Support
configure: creating ./config.status
config.status: creating Makefile
config.status: creating compat/Makefile
config.status: creating lib/Makefile
config.status: creating scripts/Makefile
config.status: creating scripts/RunCache
config.status: creating scripts/RunAccel
config.status: creating src/Makefile
config.status: creating src/base/Makefile
config.status: creating src/acl/Makefile
config.status: creating src/fs/Makefile
config.status: creating src/repl/Makefile
config.status: creating src/auth/Makefile
config.status: creating src/adaptation/Makefile
config.status: creating src/adaptation/icap/Makefile
config.status: creating src/adaptation/ecap/Makefile
config.status: creating src/esi/Makefile
config.status: creating src/icmp/Makefile
config.status: creating src/ip/Makefile
config.status: creating contrib/Makefile
config.status: creating snmplib/Makefile
config.status: creating icons/Makefile
config.status: creating errors/Makefile
config.status: creating test-suite/Makefile
config.status: creating doc/Makefile
config.status: creating helpers/Makefile
config.status: creating helpers/basic_auth/Makefile
config.status: creating helpers/basic_auth/LDAP/Makefile
config.status: creating helpers/basic_auth/MSNT/Makefile
config.status: creating helpers/basic_auth/NCSA/Makefile
config.status: creating helpers/basic_auth/PAM/Makefile
config.status: creating helpers/basic_auth/SMB/Makefile
config.status: creating helpers/basic_auth/mswin_sspi/Makefile
config.status: creating helpers/basic_auth/YP/Makefile
config.status: creating helpers/basic_auth/getpwnam/Makefile
config.status: creating helpers/basic_auth/multi-domain-NTLM/Makefile
config.status: creating helpers/basic_auth/SASL/Makefile
config.status: creating helpers/basic_auth/POP3/Makefile
config.status: creating helpers/basic_auth/DB/Makefile
config.status: creating helpers/basic_auth/squid_radius_auth/Makefile
config.status: creating helpers/digest_auth/Makefile
config.status: creating helpers/digest_auth/password/Makefile
config.status: creating helpers/digest_auth/ldap/Makefile
config.status: creating helpers/digest_auth/eDirectory/Makefile
config.status: creating helpers/ntlm_auth/Makefile
config.status: creating helpers/ntlm_auth/fakeauth/Makefile
config.status: creating helpers/ntlm_auth/no_check/Makefile
config.status: creating helpers/ntlm_auth/smb_lm/Makefile
config.status: creating helpers/ntlm_auth/smb_lm/smbval/Makefile
config.status: creating helpers/ntlm_auth/mswin_sspi/Makefile
config.status: creating helpers/negotiate_auth/Makefile
config.status: creating helpers/negotiate_auth/mswin_sspi/Makefile
config.status: creating helpers/external_acl/Makefile
config.status: creating helpers/external_acl/ip_user/Makefile
config.status: creating helpers/external_acl/ldap_group/Makefile
config.status: creating helpers/external_acl/session/Makefile
config.status: creating helpers/external_acl/unix_group/Makefile
config.status: creating helpers/external_acl/wbinfo_group/Makefile
config.status: creating helpers/external_acl/mswin_ad_group/Makefile
config.status: creating helpers/external_acl/mswin_lm_group/Makefile
config.status: creating tools/Makefile
config.status: creating include/autoconf.h
config.status: executing depfiles commands
=== configuring in helpers/negotiate_auth/squid_kerb_auth (/scratch/www/squid31/work/squid-3.1.0.8/helpers/negotiate_auth/squid_kerb_auth)
configure: running /bin/sh ./configure --disable-option-checking '--prefix=/usr/pkg'  '--sysconfdir=/usr/pkg/etc/squid' '--localstatedir=/var/squid' '--datarootdir=/usr/pkg/share/squid' '--enable-auth=basic,digest,ntlm' '--enable-cachemgr-hostname=localhost' '--enable-delay-pools' '--enable-icmp' '--enable-removal-policies=lru,heap' '--enable-poll' '--enable-underscores' '--enable-storeio=ufs diskd' '--with-aio' '--with-default-user=squid' '--with-pidfile=/var/run/squid.pid' '--enable-carp' '--enable-snmp' '--enable-ssl' '--with-openssl=/usr' '--enable-basic-auth-helpers=getpwnam MSNT NCSA YP PAM' '--enable-digest-auth-helpers=password' '--enable-ntlm-auth-helpers=fakeauth' '--enable-external-acl-helpers=ip_user unix_group' '--host=i386-pc-dragonfly' '--mandir=/usr/pkg/man' 'host_alias=i386-pc-dragonfly' 'CC=cc' 'CFLAGS=-O2 -I/usr/include' 'LDFLAGS=-L/usr/lib -Wl,-R/usr/lib -Wl,-R/usr/pkg/lib' 'LIBS=' 'CPPFLAGS=-I/usr/include' 'CXX=c++' 'CXXFLAGS=-O2 -I/usr/include' 'F77=f77' 'FFLAGS=-O' '--with-squid=/scratch/www/squid31/work/squid-3.1.0.8' '--enable-ltdl-convenience' --cache-file=/dev/null --srcdir=.
configure: WARNING: If you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used.
checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... ./install-sh -c -d
checking for gawk... /usr/bin/awk
checking whether make sets $(MAKE)... yes
checking for i386-pc-dragonfly-strip... no
checking for strip... strip
checking for i386-pc-dragonfly-gcc... cc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables... 
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether cc accepts -g... yes
checking for cc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of cc... gcc3
checking how to run the C preprocessor... cc -E
checking for krb5-config... no
krb5-config: not found
krb5-config: not found
checking for main in -lresolv... no
checking for main in -lcom_err... yes
checking for main in -ldes425... no
checking for main in -lk5crypto... no
checking for main in -lkrb5... no
checking for main in -lgssapi_krb5... no
checking gssapi.h usability... no
checking gssapi.h presence... no
checking for gssapi.h... no
checking gssapi/gssapi.h usability... no
checking gssapi/gssapi.h presence... no
checking for gssapi/gssapi.h... no
checking gssapi/gssapi_krb5.h usability... no
checking gssapi/gssapi_krb5.h presence... no
checking for gssapi/gssapi_krb5.h... no
checking gssapi/gssapi_generic.h usability... no
checking gssapi/gssapi_generic.h presence... no
checking for gssapi/gssapi_generic.h... no
checking for SPNEGO support... no
checking whether byte ordering is bigendian... no
checking errno.h usability... yes
checking errno.h presence... yes
checking for errno.h... yes
checking netdb.h usability... yes
checking netdb.h presence... yes
checking for netdb.h... yes
checking stdio.h usability... yes
checking stdio.h presence... yes
checking for stdio.h... yes
checking stdlib.h usability... yes
checking stdlib.h presence... yes
checking for stdlib.h... yes
checking string.h usability... yes
checking string.h presence... yes
checking for string.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking time.h usability... yes
checking time.h presence... yes
checking for time.h... yes
checking unistd.h usability... yes
checking unistd.h presence... yes
checking for unistd.h... yes
checking for SQUID at '/scratch/www/squid31/work/squid-3.1.0.8' ... yes
checking getaddrinfo.h usability... yes
checking getaddrinfo.h presence... yes
checking for getaddrinfo.h... yes
checking getnameinfo.h usability... yes
checking getnameinfo.h presence... yes
checking for getnameinfo.h... yes
checking util.h usability... yes
checking util.h presence... yes
checking for util.h... yes
checking whether xgetaddrinfo is declared... yes
checking whether xfreeaddrinfo is declared... yes
checking whether xgai_strerror is declared... yes
checking whether xgetnameinfo is declared... yes
checking whether xstrdup is declared... yes
checking whether xmalloc is declared... yes
checking whether xfree is declared... yes
checking for main in -lm... no
checking for main in -lmw... no
configure: ## -----------------------------##
configure: ##
configure: ## mit has been selected
configure: ##
configure: ## -----------------------------##
configure: creating ./config.status
config.status: creating Makefile
config.status: creating ska_config.h
config.status: executing depfiles commands
configure: updating ska_config.h
=== configuring in lib/libTrie (/scratch/www/squid31/work/squid-3.1.0.8/lib/libTrie)
configure: running /bin/sh ./configure --disable-option-checking '--prefix=/usr/pkg'  '--sysconfdir=/usr/pkg/etc/squid' '--localstatedir=/var/squid' '--datarootdir=/usr/pkg/share/squid' '--enable-auth=basic,digest,ntlm' '--enable-cachemgr-hostname=localhost' '--enable-delay-pools' '--enable-icmp' '--enable-removal-policies=lru,heap' '--enable-poll' '--enable-underscores' '--enable-storeio=ufs diskd' '--with-aio' '--with-default-user=squid' '--with-pidfile=/var/run/squid.pid' '--enable-carp' '--enable-snmp' '--enable-ssl' '--with-openssl=/usr' '--enable-basic-auth-helpers=getpwnam MSNT NCSA YP PAM' '--enable-digest-auth-helpers=password' '--enable-ntlm-auth-helpers=fakeauth' '--enable-external-acl-helpers=ip_user unix_group' '--host=i386-pc-dragonfly' '--mandir=/usr/pkg/man' 'host_alias=i386-pc-dragonfly' 'CC=cc' 'CFLAGS=-O2 -I/usr/include' 'LDFLAGS=-L/usr/lib -Wl,-R/usr/lib -Wl,-R/usr/pkg/lib' 'LIBS=' 'CPPFLAGS=-I/usr/include' 'CXX=c++' 'CXXFLAGS=-O2 -I/usr/include' 'F77=f77' 'FFLAGS=-O' '--with-squid=/scratch/www/squid31/work/squid-3.1.0.8' '--enable-ltdl-convenience' --cache-file=/dev/null --srcdir=.
configure: WARNING: If you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used.
checking for C++ compiler default output file name... a.out
checking whether the C++ compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables... 
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether c++ accepts -g... yes
checking for i386-pc-dragonfly-gcc... cc
checking whether we are using the GNU C compiler... yes
checking whether cc accepts -g... yes
checking for cc option to accept ISO C89... none needed
checking whether make sets $(MAKE)... yes
checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... cfgaux/install-sh -c -d
checking for gawk... /usr/bin/awk
checking for style of include used by make... GNU
checking dependency style of cc... gcc3
checking dependency style of c++... gcc3
checking whether to enable maintainer-specific portions of Makefiles... no
checking for i386-pc-dragonfly-ranlib... no
checking for ranlib... ranlib
checking whether compiler accepts -fhuge-objects... no
checking for an ANSI C-conforming const... yes
checking how to run the C preprocessor... cc -E
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... (cached) /usr/bin/egrep
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for size_t... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating include/Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating config.h
config.status: executing depfiles commands
=== configuring in lib/libLtdl (/scratch/www/squid31/work/squid-3.1.0.8/lib/libLtdl)
configure: running /bin/sh ./configure --disable-option-checking '--prefix=/usr/pkg'  '--sysconfdir=/usr/pkg/etc/squid' '--localstatedir=/var/squid' '--datarootdir=/usr/pkg/share/squid' '--enable-auth=basic,digest,ntlm' '--enable-cachemgr-hostname=localhost' '--enable-delay-pools' '--enable-icmp' '--enable-removal-policies=lru,heap' '--enable-poll' '--enable-underscores' '--enable-storeio=ufs diskd' '--with-aio' '--with-default-user=squid' '--with-pidfile=/var/run/squid.pid' '--enable-carp' '--enable-snmp' '--enable-ssl' '--with-openssl=/usr' '--enable-basic-auth-helpers=getpwnam MSNT NCSA YP PAM' '--enable-digest-auth-helpers=password' '--enable-ntlm-auth-helpers=fakeauth' '--enable-external-acl-helpers=ip_user unix_group' '--host=i386-pc-dragonfly' '--mandir=/usr/pkg/man' 'host_alias=i386-pc-dragonfly' 'CC=cc' 'CFLAGS=-O2 -I/usr/include' 'LDFLAGS=-L/usr/lib -Wl,-R/usr/lib -Wl,-R/usr/pkg/lib' 'LIBS=' 'CPPFLAGS=-I/usr/include' 'CXX=c++' 'CXXFLAGS=-O2 -I/usr/include' 'F77=f77' 'FFLAGS=-O' '--with-squid=/scratch/www/squid31/work/squid-3.1.0.8' '--enable-ltdl-convenience' --cache-file=/dev/null --srcdir=.
configure: WARNING: If you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used.
checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... ./install-sh -c -d
checking for gawk... /usr/bin/awk
checking whether make sets $(MAKE)... yes
checking for i386-pc-dragonfly-strip... no
checking for strip... strip
checking for i386-pc-dragonfly-gcc... cc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables... 
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether cc accepts -g... yes
checking for cc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of cc... none
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking build system type... i386-unknown-dragonfly2.3.1
checking host system type... i386-pc-dragonfly
checking for a sed that does not truncate output... /scratch/www/squid31/work/.tools/bin/sed
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... (cached) /usr/bin/egrep
checking for ld used by cc... /scratch/www/squid31/work/.wrapper/bin/ld
checking if the linker (/scratch/www/squid31/work/.wrapper/bin/ld) is GNU ld... yes
checking for /scratch/www/squid31/work/.wrapper/bin/ld option to reload object files... -r
checking for BSD-compatible nm... nm
checking whether ln -s works... yes
checking how to recognize dependent libraries... pass_all
checking how to run the C preprocessor... cc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking whether we are using the GNU C++ compiler... yes
checking whether c++ accepts -g... yes
checking dependency style of c++... none
checking how to run the C++ preprocessor... c++ -E
checking for i386-pc-dragonfly-g77... f77
checking whether we are using the GNU Fortran 77 compiler... no
checking whether f77 accepts -g... no
checking the maximum length of command line arguments... 196608
checking command to parse nm output from cc object... ok
checking for objdir... .libs
checking for i386-pc-dragonfly-ar... no
checking for ar... ar
checking for i386-pc-dragonfly-ranlib... no
checking for ranlib... ranlib
checking for i386-pc-dragonfly-strip... strip
checking if cc supports -fno-rtti -fno-exceptions... no
checking for cc option to produce PIC... -fPIC
checking if cc PIC flag -fPIC works... yes
checking if cc static flag -static works... yes
checking if cc supports -c -o file.o... yes
checking whether the cc linker (/scratch/www/squid31/work/.wrapper/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... dragonfly ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by c++... /scratch/www/squid31/work/.wrapper/bin/ld
checking if the linker (/scratch/www/squid31/work/.wrapper/bin/ld) is GNU ld... yes
checking whether the c++ linker (/scratch/www/squid31/work/.wrapper/bin/ld) supports shared libraries... yes
checking for c++ option to produce PIC... -fPIC
checking if c++ PIC flag -fPIC works... yes
checking if c++ static flag -static works... yes
checking if c++ supports -c -o file.o... yes
checking whether the c++ linker (/scratch/www/squid31/work/.wrapper/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... dragonfly ld.so
(cached) (cached) checking how to hardcode library paths into programs... immediate
appending configuration tag "F77" to libtool
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for f77 option to produce PIC... -fPIC
checking if f77 PIC flag -fPIC works... no
checking if f77 static flag -static works... no
checking if f77 supports -c -o file.o... no
checking whether the f77 linker (/scratch/www/squid31/work/.wrapper/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... dragonfly ld.so
(cached) (cached) checking how to hardcode library paths into programs... immediate
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking which extension is used for loadable modules... .so
checking which variable specifies run-time library path... LD_LIBRARY_PATH
checking for the default library search path... /lib /usr/lib
checking for objdir... .libs
checking whether libtool supports -dlopen/-dlpreopen... yes
checking for shl_load... no
checking for shl_load in -ldld... no
checking for dlopen in -ldl... no
checking for dlerror... yes
checking for _ prefix in compiled symbols... no
checking whether deplibs are loaded by dlopen... yes
checking argz.h usability... no
checking argz.h presence... no
checking for argz.h... no
checking for error_t... no
checking for argz_append... no
checking for argz_create_sep... no
checking for argz_insert... no
checking for argz_next... no
checking for argz_stringify... no
checking assert.h usability... yes
checking assert.h presence... yes
checking for assert.h... yes
checking ctype.h usability... yes
checking ctype.h presence... yes
checking for ctype.h... yes
checking errno.h usability... yes
checking errno.h presence... yes
checking for errno.h... yes
checking malloc.h usability... yes
checking malloc.h presence... yes
checking for malloc.h... yes
checking for memory.h... (cached) yes
checking for stdlib.h... (cached) yes
checking stdio.h usability... yes
checking stdio.h presence... yes
checking for stdio.h... yes
checking for unistd.h... (cached) yes
checking dl.h usability... no
checking dl.h presence... no
checking for dl.h... no
checking sys/dl.h usability... no
checking sys/dl.h presence... no
checking for sys/dl.h... no
checking dld.h usability... no
checking dld.h presence... no
checking for dld.h... no
checking mach-o/dyld.h usability... no
checking mach-o/dyld.h presence... no
checking for mach-o/dyld.h... no
checking for string.h... (cached) yes
checking for strchr... yes
checking for strrchr... yes
checking for memcpy... yes
checking for memmove... yes
checking for strcmp... yes
checking for closedir... yes
checking for opendir... yes
checking for readdir... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating config.h
config.status: executing depfiles commands
WARNING: *** Please consider adding fortran to USE_LANGUAGES in the package Makefile.