=> Bootstrap dependency digest>=20010302: found digest-20080510 WARNING: [license.mk] Every package should define a LICENSE. => Checksum SHA1 OK for squid-2.7.STABLE6.tar.bz2 => Checksum RMD160 OK for squid-2.7.STABLE6.tar.bz2 ===> Installing dependencies for squid-2.7.6nb1 ========================================================================== The supported build options for squid are: snmp squid-backend-aufs squid-backend-coss squid-backend-diskd squid-backend-null squid-backend-ufs squid-carp squid-ipf squid-ldap-helper squid-pam-helper squid-pf squid-unlinkd ssl The currently selected options are: snmp squid-backend-coss squid-backend-diskd squid-carp squid-pam-helper squid-unlinkd ssl You can select which build options to use by setting PKG_DEFAULT_OPTIONS or the following variable. Its current value is shown: PKG_OPTIONS.squid (not defined) ========================================================================== ========================================================================== The following variables will affect the build process of this package, squid-2.7.6nb1. Their current value is shown below: * LOGDIR = /var/squid/logs * PAM_DEFAULT = openpam * SSLBASE = /usr * SSLCERTS = /etc/ssl/certs * SSLDIR = /etc/ssl * SSLKEYS = /etc/ssl/private * VARBASE = /var Based on these variables, the following variables have been set: * PAMBASE (defined, but empty) * PAM_TYPE = openpam You may want to abort the process now with CTRL-C and change their value before continuing. Be sure to run `/usr/pkg/bin/bmake clean' after the changes. ========================================================================== => Build dependency perl>=5.0: found perl-5.10.0nb6 => Build dependency checkperms>=1.1: found checkperms-1.10 ===> Overriding tools for squid-2.7.6nb1 ===> Extracting for squid-2.7.6nb1 ===> Patching for squid-2.7.6nb1 => Applying pkgsrc patches for squid-2.7.6nb1 ===> Creating toolchain wrappers for squid-2.7.6nb1 ===> Configuring for squid-2.7.6nb1 => Fixing configuration files. => Modifying GNU configure scripts to avoid --recheck => Replacing config-guess with pkgsrc versions => Replacing config-sub with pkgsrc versions => Replacing install-sh with pkgsrc version => Checking for portability problems in extracted files configure: WARNING: Unrecognized options: --enable-underscores configure: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used. checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether build environment is sane... yes checking for gawk... /usr/bin/awk checking whether make sets $(MAKE)... yes checking for i386-pc-dragonfly-strip... no checking for strip... strip checking whether to enable maintainer-specific portions of Makefiles... no checking for i386-pc-dragonfly-gcc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of cc... gcc3 checking whether cc understands -c and -o together... yes checking build system type... i386-unknown-dragonfly2.3.1 checking host system type... i386-pc-dragonfly checking for pkg-config... false With aio Store modules built: ufs null aufs coss diskd aufs store used, pthreads support automatically enabled Removal policies built: lru heap ICMP enabled Delay pools enabled SNMP monitoring enabled Cachemgr default hostname set to localhost SSL gatewaying using OpenSSL enabled Using OpenSSL MD5 implementation Forcing poll() to be enabled Auth scheme modules built: basic digest ntlm Basic auth helpers built: getpwnam MSNT NCSA YP PAM NTLM auth helpers built: fakeauth SMB Digest auth helpers built: password External acl helpers built: ip_user unix_group unlinkd enabled checking for egrep... (cached) /usr/bin/egrep checking how to run the C preprocessor... cc -E checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking for i386-pc-dragonfly-ranlib... no checking for ranlib... ranlib checking whether ln -s works... yes checking for sh... /scratch/www/squid27/work/.tools/bin/sh checking for false... (cached) /usr/bin/false checking for true... (cached) /usr/bin/true checking for rm... /bin/rm checking for mv... /bin/mv checking for mkdir... /bin/mkdir -p checking for ln... /bin/ln checking for perl... /usr/pkg/bin/perl checking for ar... /usr/bin/ar checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking for ANSI C header files... yes checking for sys/types.h... yes checking for stddef.h... yes checking for limits.h... yes checking for sys/param.h... yes checking for sys/socket.h... yes checking for netinet/in.h... yes checking for stdio.h... yes checking for stdlib.h... yes checking for arpa/inet.h... yes checking for arpa/nameser.h... yes checking for assert.h... yes checking for bstring.h... no checking for crypt.h... no checking for ctype.h... yes checking for errno.h... yes checking for execinfo.h... no checking for fcntl.h... yes checking for fnmatch.h... yes checking for getopt.h... yes checking for glob.h... yes checking for gnumalloc.h... no checking for grp.h... yes checking for libc.h... no checking for linux/netfilter_ipv4.h... no checking for linux/netfilter_ipv4/ip_tproxy.h... no checking for machine/byte_swap.h... no checking for malloc.h... yes checking for math.h... yes checking for memory.h... yes checking for mount.h... no checking for net/if.h... yes checking for net/pf/pfvar.h... yes checking for net/pfvar.h... no checking for netdb.h... yes checking for netinet/if_ether.h... yes checking for netinet/tcp.h... yes checking for openssl/err.h... yes checking for openssl/md5.h... yes checking for openssl/ssl.h... yes checking for openssl/engine.h... yes checking for paths.h... yes checking for poll.h... yes checking for pwd.h... yes checking for regex.h... yes checking for resolv.h... yes checking for sched.h... yes checking for signal.h... yes checking for stdarg.h... yes checking for string.h... yes checking for strings.h... yes checking for sys/bitypes.h... no checking for sys/file.h... yes checking for sys/ioctl.h... yes checking for sys/mount.h... yes checking for md5.h... yes checking for sys/md5.h... yes checking for sys/msg.h... yes checking for sys/prctl.h... no checking for sys/resource.h... yes checking for sys/poll.h... yes checking for sys/select.h... yes checking for sys/stat.h... yes checking for sys/statfs.h... no checking for sys/statvfs.h... yes checking for syscall.h... no checking for sys/syscall.h... yes checking for sys/time.h... yes checking for sys/un.h... yes checking for sys/vfs.h... no checking for sys/wait.h... yes checking for sys/event.h... yes checking for syslog.h... yes checking for time.h... yes checking for unistd.h... yes checking for utime.h... yes checking for varargs.h... yes checking for byteswap.h... no checking for glib.h... no checking for stdint.h... yes checking for inttypes.h... yes checking for grp.h... (cached) yes checking for nss_common.h... no checking for nss.h... yes checking for db.h... yes checking for db_185.h... no checking for aio.h... yes checking for sys/capability.h... no checking for ip_compat.h... no checking for ip_fil_compat.h... no checking for ip_fil.h... no checking for ip_nat.h... no checking for ipl.h... no checking for netinet/ip_compat.h... no checking for netinet/ip_fil_compat.h... no checking for netinet/ip_fil.h... no checking for netinet/ip_nat.h... no checking for netinet/ipl.h... no checking for an ANSI C-conforming const... yes checking whether byte ordering is bigendian... no checking for inline... inline checking if ANSI prototypes work... yes checking for tm->tm_gmtoff... yes checking for struct mallinfo... no checking for extended mallinfo... no checking for struct rusage... yes checking for ip->ip_hl... yes checking size of void *... 4 checking size of char... 1 checking size of short... 2 checking size of int... 4 checking size of long... 4 checking size of long long... 8 checking size of int8_t... 1 checking size of uint8_t... 1 checking size of u_int8_t... 1 checking size of int16_t... 2 checking size of uint16_t... 2 checking size of u_int16_t... 2 checking size of int32_t... 4 checking size of uint32_t... 4 checking size of u_int32_t... 4 checking size of int64_t... 8 checking size of uint64_t... 8 checking size of u_int64_t... 8 checking size of __int64... 0 checking for int8_t... yes checking for u_int8_t... yes checking for uint8_t... yes checking for int16_t... yes checking for u_int16_t... yes checking for uint16_t... yes checking for int32_t... yes checking for u_int32_t... yes checking for uint32_t... yes checking for int64_t... yes checking for u_int64_t... yes checking for uint64_t... yes checking for pid_t... yes checking for size_t... yes checking for ssize_t... yes checking for off_t... yes checking for mode_t... yes checking for fd_set... yes checking size of off_t... 8 checking size of size_t... 4 checking for working alloca.h... no checking for alloca... yes checking for socklen_t... yes checking for mtyp_t... no checking for main in -lnsl... no checking for main in -lsocket... no checking for unix domain sockets... yes checking for main in -lgnumalloc... no checking for main in -lmalloc... no checking for main in -lbsd... no checking for main in -lregex... no checking for main in -lm... yes checking for crypt in -lcrypt... yes checking for MD5Init in -lmd5... no checking for MD5Init in -lmd... yes checking for main in -lpthread... yes checking for aio_read in -lrt... no checking for aio_read in -laio... no checking for epoll_ctl in -lepoll... no checking for main in -llber... no checking if dbopen needs -ldb... no checking for bcopy... yes checking for backtrace_symbols_fd... no checking for fchmod... yes checking for getdtablesize... yes checking for getpagesize... yes checking for getpass... yes checking for getrusage... yes checking for getspnam... no checking for gettimeofday... yes checking for glob... yes checking for kqueue... yes checking for lrand48... yes checking for mallinfo... no checking for mallocblksize... no checking for MD5Init... yes checking for mallopt... no checking for memcpy... yes checking for memmove... yes checking for memset... yes checking for mkstemp... yes checking for mktime... yes checking for mstats... no checking for poll... (cached) yes checking for prctl... no checking for pthread_attr_setscope... yes checking for pthread_setschedparam... yes checking for pthread_attr_setschedparam... yes checking for pthread_sigmask... yes checking for putenv... yes checking for random... yes checking for regcomp... yes checking for regexec... yes checking for regfree... yes checking for res_init... yes checking for __res_init... yes checking for rint... yes checking for sbrk... yes checking for select... yes checking for seteuid... yes checking for setgroups... yes checking for setpgrp... yes checking for setrlimit... yes checking for getrlimit... yes checking for setsid... yes checking for sigaction... yes checking for snprintf... yes checking for socketpair... yes checking for srand48... yes checking for srandom... yes checking for statfs... yes checking for strsep... yes checking for strtoll... yes checking for sysconf... yes checking for syslog... yes checking for timegm... yes checking for vsnprintf... yes checking for epoll_ctl... no checking for crypt... yes Using poll for the IO loop. checking if AF_UNIX dgram sockets support large packets... no checking if setresuid is implemented... yes checking if va_copy is implemented... yes checking if __va_copy is implemented... yes checking if GNUregex needs to be compiled... no checking for drand48... yes checking for tempnam... yes checking for strerror... yes checking for initgroups... yes checking Default FD_SETSIZE value... 1024 checking Maximum number of filedescriptors we can open... 11072 checking Default UDP send buffer size... 9216 checking Default UDP receive buffer size... 42080 checking Default TCP send buffer size... 57344 Limiting send buffer size to 32K checking Default TCP receive buffer size... 57344 checking if sys_errlist is already defined... no checking if inet_ntoa() actually works... "yes" checking for working statvfs() interface... yes checking for _res.nsaddr_list... yes configure: creating ./config.status config.status: creating Makefile config.status: creating lib/Makefile config.status: creating scripts/Makefile config.status: creating scripts/RunCache config.status: creating src/Makefile config.status: creating src/fs/Makefile config.status: creating src/repl/Makefile config.status: creating src/auth/Makefile config.status: creating contrib/Makefile config.status: creating snmplib/Makefile config.status: creating icons/Makefile config.status: creating errors/Makefile config.status: creating doc/Makefile config.status: creating helpers/Makefile config.status: creating helpers/basic_auth/Makefile config.status: creating helpers/basic_auth/LDAP/Makefile config.status: creating helpers/basic_auth/MSNT/Makefile config.status: creating helpers/basic_auth/NCSA/Makefile config.status: creating helpers/basic_auth/PAM/Makefile config.status: creating helpers/basic_auth/SMB/Makefile config.status: creating helpers/basic_auth/YP/Makefile config.status: creating helpers/basic_auth/getpwnam/Makefile config.status: creating helpers/basic_auth/mswin_sspi/Makefile config.status: creating helpers/basic_auth/multi-domain-NTLM/Makefile config.status: creating helpers/basic_auth/SASL/Makefile config.status: creating helpers/basic_auth/POP3/Makefile config.status: creating helpers/basic_auth/DB/Makefile config.status: creating helpers/basic_auth/squid_radius_auth/Makefile config.status: creating helpers/digest_auth/Makefile config.status: creating helpers/digest_auth/password/Makefile config.status: creating helpers/digest_auth/ldap/Makefile config.status: creating helpers/digest_auth/eDirectory/Makefile config.status: creating helpers/ntlm_auth/Makefile config.status: creating helpers/ntlm_auth/fakeauth/Makefile config.status: creating helpers/ntlm_auth/mswin_sspi/Makefile config.status: creating helpers/ntlm_auth/no_check/Makefile config.status: creating helpers/ntlm_auth/SMB/Makefile config.status: creating helpers/ntlm_auth/SMB/smbval/Makefile config.status: creating helpers/negotiate_auth/Makefile config.status: creating helpers/negotiate_auth/mswin_sspi/Makefile config.status: creating helpers/negotiate_auth/squid_kerb_auth/Makefile config.status: creating helpers/external_acl/Makefile config.status: creating helpers/external_acl/ip_user/Makefile config.status: creating helpers/external_acl/ldap_group/Makefile config.status: creating helpers/external_acl/mswin_ad_group/Makefile config.status: creating helpers/external_acl/mswin_lm_group/Makefile config.status: creating helpers/external_acl/session/Makefile config.status: creating helpers/external_acl/unix_group/Makefile config.status: creating helpers/external_acl/wbinfo_group/Makefile config.status: creating tools/Makefile config.status: creating include/autoconf.h config.status: executing depfiles commands configure: WARNING: Unrecognized options: --enable-underscores