=> Bootstrap dependency digest>=20010302: found digest-20080510 => Checksum SHA1 OK for courier-authlib-0.61.0.tar.bz2 => Checksum RMD160 OK for courier-authlib-0.61.0.tar.bz2 ===> Installing dependencies for courier-authlib-0.61.0 ========================================================================== The supported build options for courier-authlib are: bdb ldap mysql pam pgsql The currently selected options are: bdb You can select which build options to use by setting PKG_DEFAULT_OPTIONS or the following variable. Its current value is shown: PKG_OPTIONS.courier-authlib (not defined) ========================================================================== ========================================================================== The following variables will affect the build process of this package, courier-authlib-0.61.0. Their current value is shown below: * BDB185_DEFAULT = db1 * BDB_DEFAULT = db4 * VARBASE = /var Based on these variables, the following variables have been set: * BDBBASE = /usr * BDB_LIBS (defined, but empty) * BDB_TYPE = db1 You may want to abort the process now with CTRL-C and change their value before continuing. Be sure to run `/usr/pkg/bin/bmake clean' after the changes. ========================================================================== => Build dependency libtool-base>=1.5.22nb1: found libtool-base-1.5.26nb1 => Build dependency gmake>=3.81: found gmake-3.81 => Build dependency checkperms>=1.1: found checkperms-1.10 => Full dependency perl>=5.0: found perl-5.10.0nb6 => Full dependency libltdl>=1.5.10: found libltdl-1.5.26 ===> Overriding tools for courier-authlib-0.61.0 ===> Extracting for courier-authlib-0.61.0 ===> Patching for courier-authlib-0.61.0 => Applying pkgsrc patches for courier-authlib-0.61.0 ===> Creating toolchain wrappers for courier-authlib-0.61.0 ===> Configuring for courier-authlib-0.61.0 => Modifying GNU configure scripts to avoid --recheck => Replacing config-guess with pkgsrc versions => Replacing config-sub with pkgsrc versions => Replacing install-sh with pkgsrc version => Replacing Perl interpreter in samplepipe.pl sysconftool samplepipe.pl. => Checking for portability problems in extracted files configure: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used. checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether build environment is sane... yes checking for a thread-safe mkdir -p... ./install-sh -c -d checking for gawk... /usr/bin/awk checking whether make sets $(MAKE)... yes checking for i386-pc-dragonfly-strip... no checking for strip... strip checking for gawk... (cached) /usr/bin/awk checking for i386-pc-dragonfly-gcc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of cc... gcc3 checking how to run the C preprocessor... cc -E checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether ln -s works... yes checking for perl5... no checking for perl... /scratch/security/courier-authlib/work/.tools/bin/perl checking for sysconftool...... ././sysconftool checking for lt_dlinit in -lltdl... yes checking build system type... i386-unknown-dragonfly2.3.1 checking host system type... i386-pc-dragonfly checking for a sed that does not truncate output... /scratch/security/courier-authlib/work/.tools/bin/sed checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for ld used by cc... /scratch/security/courier-authlib/work/.wrapper/bin/ld checking if the linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) is GNU ld... yes checking for /scratch/security/courier-authlib/work/.wrapper/bin/ld option to reload object files... -r checking for BSD-compatible nm... nm checking how to recognize dependent libraries... pass_all checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking whether we are using the GNU C++ compiler... yes checking whether c++ accepts -g... yes checking dependency style of c++... gcc3 checking how to run the C++ preprocessor... c++ -E checking for i386-pc-dragonfly-g77... f77 checking whether we are using the GNU Fortran 77 compiler... no checking whether f77 accepts -g... no checking the maximum length of command line arguments... (cached) 262144 checking command to parse nm output from cc object... ok checking for objdir... .libs checking for i386-pc-dragonfly-ar... no checking for ar... ar checking for i386-pc-dragonfly-ranlib... no checking for ranlib... ranlib checking for i386-pc-dragonfly-strip... strip checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC checking if cc PIC flag -fPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking whether the cc linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking for shl_load... no checking for shl_load in -ldld... no checking for dlopen... yes checking whether a program can dlopen itself... yes checking whether a statically linked program can dlopen itself... no checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by c++... /scratch/security/courier-authlib/work/.wrapper/bin/ld checking if the linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) is GNU ld... yes checking whether the c++ linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking for c++ option to produce PIC... -fPIC checking if c++ PIC flag -fPIC works... yes checking if c++ static flag -static works... yes checking if c++ supports -c -o file.o... yes checking whether the c++ linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for f77 option to produce PIC... -fPIC checking if f77 PIC flag -fPIC works... no checking if f77 static flag -static works... no checking if f77 supports -c -o file.o... no checking whether the f77 linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate checking for perl5... /usr/pkg/bin/perl checking for courier-config... no checking for expect... /usr/pkg/bin/expect checking for passwd... /usr/bin/passwd checking whether -lm is needed for floor... yes checking for socket in -lsocket... no checking for socket in -lsocket... (cached) no checking for connect in -lsocket... no checking for connect in -lsocket... (cached) no checking for dbopen in -ldb... no checking for db_open in -ldb... no checking for db_env_create in -ldb... no checking for dbopen... yes checking for db_open... no checking for db_env_create... no checking stdio.h usability... yes checking stdio.h presence... yes checking for stdio.h... yes checking security/pam_appl.h usability... yes checking security/pam_appl.h presence... yes checking for security/pam_appl.h... yes checking Pam/pam_appl.h usability... no checking Pam/pam_appl.h presence... no checking for Pam/pam_appl.h... no checking lber.h usability... no checking lber.h presence... no checking for lber.h... no checking ldap.h usability... no checking ldap.h presence... no checking for ldap.h... no checking netinet/in.h usability... yes checking netinet/in.h presence... yes checking for netinet/in.h... yes checking for endpwent... yes checking shadow.h usability... no checking shadow.h presence... no checking for shadow.h... no checking for getspent in -lshadow... no checking for endspent... no checking for getspent... no checking for getspent in -lshadow... (cached) no checking for getspent... (cached) no checking for pg_config... no checking for mysql_config... no checking for ANSI C header files... (cached) yes checking for sys/wait.h that is POSIX.1 compatible... yes checking for sys/stat.h... (cached) yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking for sys/wait.h... (cached) yes checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking for unistd.h... (cached) yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking crypt.h usability... no checking crypt.h presence... no checking for crypt.h... no checking termios.h usability... yes checking termios.h presence... yes checking for termios.h... yes checking for an ANSI C-conforming const... yes checking for pid_t... yes checking for uid_t in sys/types.h... yes checking return type of signal handlers... void checking for setsid... yes checking for setlogin... yes checking for crypt in -lcrypt... yes checking for crypt... yes checking for crypt() prototype... 0 checking for mail userid... courier checking for mail group id... mail checking for socklen_t... yes configure: creating ./config.status config.status: creating Makefile config.status: creating authdaemond config.status: creating authdaemonrc config.status: creating authsystem.passwd config.status: creating README.authdebug.html config.status: creating dbobj.config config.status: creating dbobj.h config.status: creating authmigrate config.status: creating courier-authlib.spec config.status: creating courier-authlib.lpspec config.status: creating courier-authlib.sysvinit config.status: creating userdb-test-cram-md5.pl config.status: creating courier_auth_config.h config.status: executing depfiles commands === configuring in libltdl (/scratch/security/courier-authlib/work/courier-authlib-0.61.0/libltdl) configure: running /bin/sh ./configure '--prefix=/usr/pkg' '--with-mailuser=courier' '--with-mailgroup=mail' '--localstatedir=/var' '--with-pkgconfdir=/usr/pkg/etc/authlib' '--without-stdheaderdir' '--with-authdaemonvar=/var/authdaemon' '--with-authpwd' '--with-authshadow' '--with-authpipe' '--without-authpam' '--with-db=db' '--with-authuserdb' '--without-authldap' '--without-authmysql' '--without-authpgsql' '--without-authvchkpw' '--without-authcustom' '--host=i386-pc-dragonfly' '--mandir=/usr/pkg/man' 'host_alias=i386-pc-dragonfly' 'CC=cc' 'CFLAGS=-O2 -I/usr/include -I/usr/pkg/include' 'LDFLAGS=-L/usr/lib -Wl,-R/usr/lib -L/usr/pkg/lib -Wl,-R/usr/pkg/lib' 'LIBS=' 'CPPFLAGS=-I/usr/include -I/usr/pkg/include' 'CXX=c++' 'CXXFLAGS=-O2 -I/usr/include -I/usr/pkg/include' 'F77=f77' 'FFLAGS=-O' '--enable-ltdl-install=no' '--with-makedatprog=/usr/pkg/libexec/courier-authlib/makedatprog' '--with-userdb=/usr/pkg/etc/authlib/userdb' --cache-file=/dev/null --srcdir=. configure: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used. checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether build environment is sane... yes checking for a thread-safe mkdir -p... ./install-sh -c -d checking for gawk... /usr/bin/awk checking whether make sets $(MAKE)... yes checking for i386-pc-dragonfly-strip... no checking for strip... strip checking for i386-pc-dragonfly-gcc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of cc... none checking for an ANSI C-conforming const... yes checking for inline... inline checking build system type... i386-unknown-dragonfly2.3.1 checking host system type... i386-pc-dragonfly checking for a sed that does not truncate output... /scratch/security/courier-authlib/work/.tools/bin/sed checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for ld used by cc... /scratch/security/courier-authlib/work/.wrapper/bin/ld checking if the linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) is GNU ld... yes checking for /scratch/security/courier-authlib/work/.wrapper/bin/ld option to reload object files... -r checking for BSD-compatible nm... nm checking whether ln -s works... yes checking how to recognize dependent libraries... pass_all checking how to run the C preprocessor... cc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking whether we are using the GNU C++ compiler... yes checking whether c++ accepts -g... yes checking dependency style of c++... none checking how to run the C++ preprocessor... c++ -E checking for i386-pc-dragonfly-g77... f77 checking whether we are using the GNU Fortran 77 compiler... no checking whether f77 accepts -g... no checking the maximum length of command line arguments... (cached) 262144 checking command to parse nm output from cc object... ok checking for objdir... .libs checking for i386-pc-dragonfly-ar... no checking for ar... ar checking for i386-pc-dragonfly-ranlib... no checking for ranlib... ranlib checking for i386-pc-dragonfly-strip... strip checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC checking if cc PIC flag -fPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking whether the cc linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by c++... /scratch/security/courier-authlib/work/.wrapper/bin/ld checking if the linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) is GNU ld... yes checking whether the c++ linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking for c++ option to produce PIC... -fPIC checking if c++ PIC flag -fPIC works... yes checking if c++ static flag -static works... yes checking if c++ supports -c -o file.o... yes checking whether the c++ linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for f77 option to produce PIC... -fPIC checking if f77 PIC flag -fPIC works... no checking if f77 static flag -static works... no checking if f77 supports -c -o file.o... no checking whether the f77 linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking which extension is used for loadable modules... .so checking which variable specifies run-time library path... LD_LIBRARY_PATH checking for the default library search path... /lib /usr/lib checking for objdir... .libs checking whether libtool supports -dlopen/-dlpreopen... yes checking for shl_load... no checking for shl_load in -ldld... no checking for dlopen in -ldl... no checking for dlerror... yes checking for _ prefix in compiled symbols... no checking whether deplibs are loaded by dlopen... yes checking argz.h usability... no checking argz.h presence... no checking for argz.h... no checking for error_t... no checking for argz_append... no checking for argz_create_sep... no checking for argz_insert... no checking for argz_next... no checking for argz_stringify... no checking assert.h usability... yes checking assert.h presence... yes checking for assert.h... yes checking ctype.h usability... yes checking ctype.h presence... yes checking for ctype.h... yes checking errno.h usability... yes checking errno.h presence... yes checking for errno.h... yes checking malloc.h usability... yes checking malloc.h presence... yes checking for malloc.h... yes checking for memory.h... (cached) yes checking for stdlib.h... (cached) yes checking stdio.h usability... yes checking stdio.h presence... yes checking for stdio.h... yes checking for unistd.h... (cached) yes checking dl.h usability... no checking dl.h presence... no checking for dl.h... no checking sys/dl.h usability... no checking sys/dl.h presence... no checking for sys/dl.h... no checking dld.h usability... no checking dld.h presence... no checking for dld.h... no checking mach-o/dyld.h usability... no checking mach-o/dyld.h presence... no checking for mach-o/dyld.h... no checking for string.h... (cached) yes checking for strchr... yes checking for strrchr... yes checking for memcpy... yes checking for memmove... yes checking for strcmp... yes checking for closedir... yes checking for opendir... yes checking for readdir... yes configure: creating ./config.status config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands === configuring in bdbobj (/scratch/security/courier-authlib/work/courier-authlib-0.61.0/bdbobj) configure: running /bin/sh ./configure '--prefix=/usr/pkg' '--with-mailuser=courier' '--with-mailgroup=mail' '--localstatedir=/var' '--with-pkgconfdir=/usr/pkg/etc/authlib' '--without-stdheaderdir' '--with-authdaemonvar=/var/authdaemon' '--with-authpwd' '--with-authshadow' '--with-authpipe' '--without-authpam' '--with-db=db' '--with-authuserdb' '--without-authldap' '--without-authmysql' '--without-authpgsql' '--without-authvchkpw' '--without-authcustom' '--host=i386-pc-dragonfly' '--mandir=/usr/pkg/man' 'host_alias=i386-pc-dragonfly' 'CC=cc' 'CFLAGS=-O2 -I/usr/include -I/usr/pkg/include' 'LDFLAGS=-L/usr/lib -Wl,-R/usr/lib -L/usr/pkg/lib -Wl,-R/usr/pkg/lib' 'LIBS=' 'CPPFLAGS=-I/usr/include -I/usr/pkg/include' 'CXX=c++' 'CXXFLAGS=-O2 -I/usr/include -I/usr/pkg/include' 'F77=f77' 'FFLAGS=-O' '--enable-ltdl-install=no' '--with-makedatprog=/usr/pkg/libexec/courier-authlib/makedatprog' '--with-userdb=/usr/pkg/etc/authlib/userdb' --cache-file=/dev/null --srcdir=. configure: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used. checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether build environment is sane... yes checking for a thread-safe mkdir -p... ./../install-sh -c -d checking for gawk... /usr/bin/awk checking whether make sets $(MAKE)... yes checking for i386-pc-dragonfly-strip... no checking for strip... strip checking for i386-pc-dragonfly-gcc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of cc... gcc3 checking how to run the C preprocessor... cc -E checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for AIX... no checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking minix/config.h usability... no checking minix/config.h presence... no checking for minix/config.h... no checking for gawk... (cached) /usr/bin/awk checking whether we are using the GNU C++ compiler... yes checking whether c++ accepts -g... yes checking dependency style of c++... gcc3 checking for library containing strerror... none required checking build system type... i386-unknown-dragonfly2.3.1 checking host system type... i386-pc-dragonfly checking for a sed that does not truncate output... /scratch/security/courier-authlib/work/.tools/bin/sed checking for ld used by cc... /scratch/security/courier-authlib/work/.wrapper/bin/ld checking if the linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) is GNU ld... yes checking for /scratch/security/courier-authlib/work/.wrapper/bin/ld option to reload object files... -r checking for BSD-compatible nm... nm checking whether ln -s works... yes checking how to recognize dependent libraries... pass_all checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking how to run the C++ preprocessor... c++ -E checking for i386-pc-dragonfly-g77... f77 checking whether we are using the GNU Fortran 77 compiler... no checking whether f77 accepts -g... no checking the maximum length of command line arguments... (cached) 262144 checking command to parse nm output from cc object... ok checking for objdir... .libs checking for i386-pc-dragonfly-ar... no checking for ar... ar checking for i386-pc-dragonfly-ranlib... no checking for ranlib... ranlib checking for i386-pc-dragonfly-strip... strip checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC checking if cc PIC flag -fPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking whether the cc linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by c++... /scratch/security/courier-authlib/work/.wrapper/bin/ld checking if the linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) is GNU ld... yes checking whether the c++ linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking for c++ option to produce PIC... -fPIC checking if c++ PIC flag -fPIC works... yes checking if c++ static flag -static works... yes checking if c++ supports -c -o file.o... yes checking whether the c++ linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for f77 option to produce PIC... -fPIC checking if f77 PIC flag -fPIC works... no checking if f77 static flag -static works... no checking if f77 supports -c -o file.o... no checking whether the f77 linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate checking for dbopen in -ldb... no checking for db_open in -ldb... no checking for db_env_create in -ldb... no checking for dbopen... yes checking for db_open... no checking for db_env_create... no checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking for unistd.h... (cached) yes checking for an ANSI C-conforming const... yes checking for size_t... yes checking if the C++ compiler needs -fhandle-exceptions... no configure: creating ./config.status config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands === configuring in gdbmobj (/scratch/security/courier-authlib/work/courier-authlib-0.61.0/gdbmobj) configure: running /bin/sh ./configure '--prefix=/usr/pkg' '--with-mailuser=courier' '--with-mailgroup=mail' '--localstatedir=/var' '--with-pkgconfdir=/usr/pkg/etc/authlib' '--without-stdheaderdir' '--with-authdaemonvar=/var/authdaemon' '--with-authpwd' '--with-authshadow' '--with-authpipe' '--without-authpam' '--with-db=db' '--with-authuserdb' '--without-authldap' '--without-authmysql' '--without-authpgsql' '--without-authvchkpw' '--without-authcustom' '--host=i386-pc-dragonfly' '--mandir=/usr/pkg/man' 'host_alias=i386-pc-dragonfly' 'CC=cc' 'CFLAGS=-O2 -I/usr/include -I/usr/pkg/include' 'LDFLAGS=-L/usr/lib -Wl,-R/usr/lib -L/usr/pkg/lib -Wl,-R/usr/pkg/lib' 'LIBS=' 'CPPFLAGS=-I/usr/include -I/usr/pkg/include' 'CXX=c++' 'CXXFLAGS=-O2 -I/usr/include -I/usr/pkg/include' 'F77=f77' 'FFLAGS=-O' '--enable-ltdl-install=no' '--with-makedatprog=/usr/pkg/libexec/courier-authlib/makedatprog' '--with-userdb=/usr/pkg/etc/authlib/userdb' --cache-file=/dev/null --srcdir=. configure: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used. checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether build environment is sane... yes checking for a thread-safe mkdir -p... ./../install-sh -c -d checking for gawk... /usr/bin/awk checking whether make sets $(MAKE)... yes checking for i386-pc-dragonfly-strip... no checking for strip... strip checking for i386-pc-dragonfly-gcc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of cc... gcc3 checking how to run the C preprocessor... cc -E checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for AIX... no checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking minix/config.h usability... no checking minix/config.h presence... no checking for minix/config.h... no checking for library containing strerror... none required checking for gawk... (cached) /usr/bin/awk checking whether we are using the GNU C++ compiler... yes checking whether c++ accepts -g... yes checking dependency style of c++... gcc3 checking build system type... i386-unknown-dragonfly2.3.1 checking host system type... i386-pc-dragonfly checking for a sed that does not truncate output... /scratch/security/courier-authlib/work/.tools/bin/sed checking for ld used by cc... /scratch/security/courier-authlib/work/.wrapper/bin/ld checking if the linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) is GNU ld... yes checking for /scratch/security/courier-authlib/work/.wrapper/bin/ld option to reload object files... -r checking for BSD-compatible nm... nm checking whether ln -s works... yes checking how to recognize dependent libraries... pass_all checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking how to run the C++ preprocessor... c++ -E checking for i386-pc-dragonfly-g77... f77 checking whether we are using the GNU Fortran 77 compiler... no checking whether f77 accepts -g... no checking the maximum length of command line arguments... (cached) 262144 checking command to parse nm output from cc object... ok checking for objdir... .libs checking for i386-pc-dragonfly-ar... no checking for ar... ar checking for i386-pc-dragonfly-ranlib... no checking for ranlib... ranlib checking for i386-pc-dragonfly-strip... strip checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC checking if cc PIC flag -fPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking whether the cc linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by c++... /scratch/security/courier-authlib/work/.wrapper/bin/ld checking if the linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) is GNU ld... yes checking whether the c++ linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking for c++ option to produce PIC... -fPIC checking if c++ PIC flag -fPIC works... yes checking if c++ static flag -static works... yes checking if c++ supports -c -o file.o... yes checking whether the c++ linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for f77 option to produce PIC... -fPIC checking if f77 PIC flag -fPIC works... no checking if f77 static flag -static works... no checking if f77 supports -c -o file.o... no checking whether the f77 linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate checking for gdbm_open in -lgdbm... no checking for gdbm_open... no checking for unistd.h... (cached) yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking for an ANSI C-conforming const... yes checking for size_t... yes checking if the C++ compiler needs -fhandle-exceptions... no configure: creating ./config.status config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands === configuring in md5 (/scratch/security/courier-authlib/work/courier-authlib-0.61.0/md5) configure: running /bin/sh ./configure '--prefix=/usr/pkg' '--with-mailuser=courier' '--with-mailgroup=mail' '--localstatedir=/var' '--with-pkgconfdir=/usr/pkg/etc/authlib' '--without-stdheaderdir' '--with-authdaemonvar=/var/authdaemon' '--with-authpwd' '--with-authshadow' '--with-authpipe' '--without-authpam' '--with-db=db' '--with-authuserdb' '--without-authldap' '--without-authmysql' '--without-authpgsql' '--without-authvchkpw' '--without-authcustom' '--host=i386-pc-dragonfly' '--mandir=/usr/pkg/man' 'host_alias=i386-pc-dragonfly' 'CC=cc' 'CFLAGS=-O2 -I/usr/include -I/usr/pkg/include' 'LDFLAGS=-L/usr/lib -Wl,-R/usr/lib -L/usr/pkg/lib -Wl,-R/usr/pkg/lib' 'LIBS=' 'CPPFLAGS=-I/usr/include -I/usr/pkg/include' 'CXX=c++' 'CXXFLAGS=-O2 -I/usr/include -I/usr/pkg/include' 'F77=f77' 'FFLAGS=-O' '--enable-ltdl-install=no' '--with-makedatprog=/usr/pkg/libexec/courier-authlib/makedatprog' '--with-userdb=/usr/pkg/etc/authlib/userdb' --cache-file=/dev/null --srcdir=. configure: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used. checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether build environment is sane... yes checking for a thread-safe mkdir -p... ./../install-sh -c -d checking for gawk... /usr/bin/awk checking whether make sets $(MAKE)... yes checking for i386-pc-dragonfly-strip... no checking for strip... strip checking for gawk... (cached) /usr/bin/awk checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether ln -s works... yes checking for i386-pc-dragonfly-gcc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of cc... gcc3 checking build system type... i386-unknown-dragonfly2.3.1 checking host system type... i386-pc-dragonfly checking for a sed that does not truncate output... /scratch/security/courier-authlib/work/.tools/bin/sed checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for ld used by cc... /scratch/security/courier-authlib/work/.wrapper/bin/ld checking if the linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) is GNU ld... yes checking for /scratch/security/courier-authlib/work/.wrapper/bin/ld option to reload object files... -r checking for BSD-compatible nm... nm checking how to recognize dependent libraries... pass_all checking how to run the C preprocessor... cc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking whether we are using the GNU C++ compiler... yes checking whether c++ accepts -g... yes checking dependency style of c++... gcc3 checking how to run the C++ preprocessor... c++ -E checking for i386-pc-dragonfly-g77... f77 checking whether we are using the GNU Fortran 77 compiler... no checking whether f77 accepts -g... no checking the maximum length of command line arguments... (cached) 262144 checking command to parse nm output from cc object... ok checking for objdir... .libs checking for i386-pc-dragonfly-ar... no checking for ar... ar checking for i386-pc-dragonfly-ranlib... no checking for ranlib... ranlib checking for i386-pc-dragonfly-strip... strip checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC checking if cc PIC flag -fPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking whether the cc linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by c++... /scratch/security/courier-authlib/work/.wrapper/bin/ld checking if the linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) is GNU ld... yes checking whether the c++ linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking for c++ option to produce PIC... -fPIC checking if c++ PIC flag -fPIC works... yes checking if c++ static flag -static works... yes checking if c++ supports -c -o file.o... yes checking whether the c++ linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for f77 option to produce PIC... -fPIC checking if f77 PIC flag -fPIC works... no checking if f77 static flag -static works... no checking if f77 supports -c -o file.o... no checking whether the f77 linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate checking for ANSI C header files... (cached) yes checking for sys/types.h... (cached) yes checking for uint32_t... yes checking for an ANSI C-conforming const... yes configure: creating ./config.status config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands === configuring in sha1 (/scratch/security/courier-authlib/work/courier-authlib-0.61.0/sha1) configure: running /bin/sh ./configure '--prefix=/usr/pkg' '--with-mailuser=courier' '--with-mailgroup=mail' '--localstatedir=/var' '--with-pkgconfdir=/usr/pkg/etc/authlib' '--without-stdheaderdir' '--with-authdaemonvar=/var/authdaemon' '--with-authpwd' '--with-authshadow' '--with-authpipe' '--without-authpam' '--with-db=db' '--with-authuserdb' '--without-authldap' '--without-authmysql' '--without-authpgsql' '--without-authvchkpw' '--without-authcustom' '--host=i386-pc-dragonfly' '--mandir=/usr/pkg/man' 'host_alias=i386-pc-dragonfly' 'CC=cc' 'CFLAGS=-O2 -I/usr/include -I/usr/pkg/include' 'LDFLAGS=-L/usr/lib -Wl,-R/usr/lib -L/usr/pkg/lib -Wl,-R/usr/pkg/lib' 'LIBS=' 'CPPFLAGS=-I/usr/include -I/usr/pkg/include' 'CXX=c++' 'CXXFLAGS=-O2 -I/usr/include -I/usr/pkg/include' 'F77=f77' 'FFLAGS=-O' '--enable-ltdl-install=no' '--with-makedatprog=/usr/pkg/libexec/courier-authlib/makedatprog' '--with-userdb=/usr/pkg/etc/authlib/userdb' --cache-file=/dev/null --srcdir=. configure: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used. checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether build environment is sane... yes checking for a thread-safe mkdir -p... ./../install-sh -c -d checking for gawk... /usr/bin/awk checking whether make sets $(MAKE)... yes checking for i386-pc-dragonfly-strip... no checking for strip... strip checking for i386-pc-dragonfly-gcc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of cc... gcc3 checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether ln -s works... yes checking build system type... i386-unknown-dragonfly2.3.1 checking host system type... i386-pc-dragonfly checking for a sed that does not truncate output... /scratch/security/courier-authlib/work/.tools/bin/sed checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for ld used by cc... /scratch/security/courier-authlib/work/.wrapper/bin/ld checking if the linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) is GNU ld... yes checking for /scratch/security/courier-authlib/work/.wrapper/bin/ld option to reload object files... -r checking for BSD-compatible nm... nm checking how to recognize dependent libraries... pass_all checking how to run the C preprocessor... cc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking whether we are using the GNU C++ compiler... yes checking whether c++ accepts -g... yes checking dependency style of c++... gcc3 checking how to run the C++ preprocessor... c++ -E checking for i386-pc-dragonfly-g77... f77 checking whether we are using the GNU Fortran 77 compiler... no checking whether f77 accepts -g... no checking the maximum length of command line arguments... (cached) 262144 checking command to parse nm output from cc object... ok checking for objdir... .libs checking for i386-pc-dragonfly-ar... no checking for ar... ar checking for i386-pc-dragonfly-ranlib... no checking for ranlib... ranlib checking for i386-pc-dragonfly-strip... strip checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC checking if cc PIC flag -fPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking whether the cc linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by c++... /scratch/security/courier-authlib/work/.wrapper/bin/ld checking if the linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) is GNU ld... yes checking whether the c++ linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking for c++ option to produce PIC... -fPIC checking if c++ PIC flag -fPIC works... yes checking if c++ static flag -static works... yes checking if c++ supports -c -o file.o... yes checking whether the c++ linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for f77 option to produce PIC... -fPIC checking if f77 PIC flag -fPIC works... no checking if f77 static flag -static works... no checking if f77 supports -c -o file.o... no checking whether the f77 linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate checking for sys/types.h... (cached) yes checking for uint32_t... yes checking for an ANSI C-conforming const... yes checking for ANSI C header files... (cached) yes configure: creating ./config.status config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands === configuring in libhmac (/scratch/security/courier-authlib/work/courier-authlib-0.61.0/libhmac) configure: running /bin/sh ./configure '--prefix=/usr/pkg' '--with-mailuser=courier' '--with-mailgroup=mail' '--localstatedir=/var' '--with-pkgconfdir=/usr/pkg/etc/authlib' '--without-stdheaderdir' '--with-authdaemonvar=/var/authdaemon' '--with-authpwd' '--with-authshadow' '--with-authpipe' '--without-authpam' '--with-db=db' '--with-authuserdb' '--without-authldap' '--without-authmysql' '--without-authpgsql' '--without-authvchkpw' '--without-authcustom' '--host=i386-pc-dragonfly' '--mandir=/usr/pkg/man' 'host_alias=i386-pc-dragonfly' 'CC=cc' 'CFLAGS=-O2 -I/usr/include -I/usr/pkg/include' 'LDFLAGS=-L/usr/lib -Wl,-R/usr/lib -L/usr/pkg/lib -Wl,-R/usr/pkg/lib' 'LIBS=' 'CPPFLAGS=-I/usr/include -I/usr/pkg/include' 'CXX=c++' 'CXXFLAGS=-O2 -I/usr/include -I/usr/pkg/include' 'F77=f77' 'FFLAGS=-O' '--enable-ltdl-install=no' '--with-makedatprog=/usr/pkg/libexec/courier-authlib/makedatprog' '--with-userdb=/usr/pkg/etc/authlib/userdb' --cache-file=/dev/null --srcdir=. configure: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used. checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether build environment is sane... yes checking for a thread-safe mkdir -p... ./../install-sh -c -d checking for gawk... /usr/bin/awk checking whether make sets $(MAKE)... yes checking for i386-pc-dragonfly-strip... no checking for strip... strip checking for gawk... (cached) /usr/bin/awk checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether ln -s works... yes checking for i386-pc-dragonfly-gcc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of cc... gcc3 checking build system type... i386-unknown-dragonfly2.3.1 checking host system type... i386-pc-dragonfly checking for a sed that does not truncate output... /scratch/security/courier-authlib/work/.tools/bin/sed checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for ld used by cc... /scratch/security/courier-authlib/work/.wrapper/bin/ld checking if the linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) is GNU ld... yes checking for /scratch/security/courier-authlib/work/.wrapper/bin/ld option to reload object files... -r checking for BSD-compatible nm... nm checking how to recognize dependent libraries... pass_all checking how to run the C preprocessor... cc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking whether we are using the GNU C++ compiler... yes checking whether c++ accepts -g... yes checking dependency style of c++... gcc3 checking how to run the C++ preprocessor... c++ -E checking for i386-pc-dragonfly-g77... f77 checking whether we are using the GNU Fortran 77 compiler... no checking whether f77 accepts -g... no checking the maximum length of command line arguments... (cached) 262144 checking command to parse nm output from cc object... ok checking for objdir... .libs checking for i386-pc-dragonfly-ar... no checking for ar... ar checking for i386-pc-dragonfly-ranlib... no checking for ranlib... ranlib checking for i386-pc-dragonfly-strip... strip checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC checking if cc PIC flag -fPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking whether the cc linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by c++... /scratch/security/courier-authlib/work/.wrapper/bin/ld checking if the linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) is GNU ld... yes checking whether the c++ linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking for c++ option to produce PIC... -fPIC checking if c++ PIC flag -fPIC works... yes checking if c++ static flag -static works... yes checking if c++ supports -c -o file.o... yes checking whether the c++ linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for f77 option to produce PIC... -fPIC checking if f77 PIC flag -fPIC works... no checking if f77 static flag -static works... no checking if f77 supports -c -o file.o... no checking whether the f77 linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate checking for ANSI C header files... (cached) yes checking for an ANSI C-conforming const... yes checking for size_t... yes configure: creating ./config.status config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands === configuring in numlib (/scratch/security/courier-authlib/work/courier-authlib-0.61.0/numlib) configure: running /bin/sh ./configure '--prefix=/usr/pkg' '--with-mailuser=courier' '--with-mailgroup=mail' '--localstatedir=/var' '--with-pkgconfdir=/usr/pkg/etc/authlib' '--without-stdheaderdir' '--with-authdaemonvar=/var/authdaemon' '--with-authpwd' '--with-authshadow' '--with-authpipe' '--without-authpam' '--with-db=db' '--with-authuserdb' '--without-authldap' '--without-authmysql' '--without-authpgsql' '--without-authvchkpw' '--without-authcustom' '--host=i386-pc-dragonfly' '--mandir=/usr/pkg/man' 'host_alias=i386-pc-dragonfly' 'CC=cc' 'CFLAGS=-O2 -I/usr/include -I/usr/pkg/include' 'LDFLAGS=-L/usr/lib -Wl,-R/usr/lib -L/usr/pkg/lib -Wl,-R/usr/pkg/lib' 'LIBS=' 'CPPFLAGS=-I/usr/include -I/usr/pkg/include' 'CXX=c++' 'CXXFLAGS=-O2 -I/usr/include -I/usr/pkg/include' 'F77=f77' 'FFLAGS=-O' '--enable-ltdl-install=no' '--with-makedatprog=/usr/pkg/libexec/courier-authlib/makedatprog' '--with-userdb=/usr/pkg/etc/authlib/userdb' --cache-file=/dev/null --srcdir=. configure: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used. checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether build environment is sane... yes checking for a thread-safe mkdir -p... ./../install-sh -c -d checking for gawk... /usr/bin/awk checking whether make sets $(MAKE)... yes checking for i386-pc-dragonfly-strip... no checking for strip... strip checking for gawk... (cached) /usr/bin/awk checking for i386-pc-dragonfly-gcc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of cc... gcc3 checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether ln -s works... yes checking build system type... i386-unknown-dragonfly2.3.1 checking host system type... i386-pc-dragonfly checking for a sed that does not truncate output... /scratch/security/courier-authlib/work/.tools/bin/sed checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for ld used by cc... /scratch/security/courier-authlib/work/.wrapper/bin/ld checking if the linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) is GNU ld... yes checking for /scratch/security/courier-authlib/work/.wrapper/bin/ld option to reload object files... -r checking for BSD-compatible nm... nm checking how to recognize dependent libraries... pass_all checking how to run the C preprocessor... cc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking whether we are using the GNU C++ compiler... yes checking whether c++ accepts -g... yes checking dependency style of c++... gcc3 checking how to run the C++ preprocessor... c++ -E checking for i386-pc-dragonfly-g77... f77 checking whether we are using the GNU Fortran 77 compiler... no checking whether f77 accepts -g... no checking the maximum length of command line arguments... (cached) 262144 checking command to parse nm output from cc object... ok checking for objdir... .libs checking for i386-pc-dragonfly-ar... no checking for ar... ar checking for i386-pc-dragonfly-ranlib... no checking for ranlib... ranlib checking for i386-pc-dragonfly-strip... strip checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC checking if cc PIC flag -fPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking whether the cc linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by c++... /scratch/security/courier-authlib/work/.wrapper/bin/ld checking if the linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) is GNU ld... yes checking whether the c++ linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking for c++ option to produce PIC... -fPIC checking if c++ PIC flag -fPIC works... yes checking if c++ static flag -static works... yes checking if c++ supports -c -o file.o... yes checking whether the c++ linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for f77 option to produce PIC... -fPIC checking if f77 PIC flag -fPIC works... no checking if f77 static flag -static works... no checking if f77 supports -c -o file.o... no checking whether the f77 linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate checking for unistd.h... (cached) yes checking for uid_t in sys/types.h... yes checking for pid_t... yes checking for setgroups... yes checking for initgroups... yes configure: creating ./config.status config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands === configuring in makedat (/scratch/security/courier-authlib/work/courier-authlib-0.61.0/makedat) configure: running /bin/sh ./configure '--prefix=/usr/pkg' '--with-mailuser=courier' '--with-mailgroup=mail' '--localstatedir=/var' '--with-pkgconfdir=/usr/pkg/etc/authlib' '--without-stdheaderdir' '--with-authdaemonvar=/var/authdaemon' '--with-authpwd' '--with-authshadow' '--with-authpipe' '--without-authpam' '--with-db=db' '--with-authuserdb' '--without-authldap' '--without-authmysql' '--without-authpgsql' '--without-authvchkpw' '--without-authcustom' '--host=i386-pc-dragonfly' '--mandir=/usr/pkg/man' 'host_alias=i386-pc-dragonfly' 'CC=cc' 'CFLAGS=-O2 -I/usr/include -I/usr/pkg/include' 'LDFLAGS=-L/usr/lib -Wl,-R/usr/lib -L/usr/pkg/lib -Wl,-R/usr/pkg/lib' 'LIBS=' 'CPPFLAGS=-I/usr/include -I/usr/pkg/include' 'CXX=c++' 'CXXFLAGS=-O2 -I/usr/include -I/usr/pkg/include' 'F77=f77' 'FFLAGS=-O' '--enable-ltdl-install=no' '--with-makedatprog=/usr/pkg/libexec/courier-authlib/makedatprog' '--with-userdb=/usr/pkg/etc/authlib/userdb' --cache-file=/dev/null --srcdir=. configure: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used. checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether build environment is sane... yes checking for a thread-safe mkdir -p... ./../install-sh -c -d checking for gawk... /usr/bin/awk checking whether make sets $(MAKE)... yes checking for i386-pc-dragonfly-strip... no checking for strip... strip checking for i386-pc-dragonfly-gcc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of cc... gcc3 checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether ln -s works... yes checking for perl5... /usr/pkg/bin/perl checking for cat... (cached) /bin/cat checking build system type... i386-unknown-dragonfly2.3.1 checking host system type... i386-pc-dragonfly checking for a sed that does not truncate output... /scratch/security/courier-authlib/work/.tools/bin/sed checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for ld used by cc... /scratch/security/courier-authlib/work/.wrapper/bin/ld checking if the linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) is GNU ld... yes checking for /scratch/security/courier-authlib/work/.wrapper/bin/ld option to reload object files... -r checking for BSD-compatible nm... nm checking how to recognize dependent libraries... pass_all checking how to run the C preprocessor... cc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking whether we are using the GNU C++ compiler... yes checking whether c++ accepts -g... yes checking dependency style of c++... gcc3 checking how to run the C++ preprocessor... c++ -E checking for i386-pc-dragonfly-g77... f77 checking whether we are using the GNU Fortran 77 compiler... no checking whether f77 accepts -g... no checking the maximum length of command line arguments... (cached) 262144 checking command to parse nm output from cc object... ok checking for objdir... .libs checking for i386-pc-dragonfly-ar... no checking for ar... ar checking for i386-pc-dragonfly-ranlib... no checking for ranlib... ranlib checking for i386-pc-dragonfly-strip... strip checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC checking if cc PIC flag -fPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking whether the cc linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking for shl_load... no checking for shl_load in -ldld... no checking for dlopen... yes checking whether a program can dlopen itself... yes checking whether a statically linked program can dlopen itself... no checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by c++... /scratch/security/courier-authlib/work/.wrapper/bin/ld checking if the linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) is GNU ld... yes checking whether the c++ linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking for c++ option to produce PIC... -fPIC checking if c++ PIC flag -fPIC works... yes checking if c++ static flag -static works... yes checking if c++ supports -c -o file.o... yes checking whether the c++ linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for f77 option to produce PIC... -fPIC checking if f77 PIC flag -fPIC works... no checking if f77 static flag -static works... no checking if f77 supports -c -o file.o... no checking whether the f77 linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate checking for ANSI C header files... (cached) yes checking for unistd.h... (cached) yes configure: creating ./config.status config.status: creating Makefile config.status: creating makedat config.status: creating config.h config.status: executing depfiles commands === configuring in userdb (/scratch/security/courier-authlib/work/courier-authlib-0.61.0/userdb) configure: running /bin/sh ./configure '--prefix=/usr/pkg' '--with-mailuser=courier' '--with-mailgroup=mail' '--localstatedir=/var' '--with-pkgconfdir=/usr/pkg/etc/authlib' '--without-stdheaderdir' '--with-authdaemonvar=/var/authdaemon' '--with-authpwd' '--with-authshadow' '--with-authpipe' '--without-authpam' '--with-db=db' '--with-authuserdb' '--without-authldap' '--without-authmysql' '--without-authpgsql' '--without-authvchkpw' '--without-authcustom' '--host=i386-pc-dragonfly' '--mandir=/usr/pkg/man' 'host_alias=i386-pc-dragonfly' 'CC=cc' 'CFLAGS=-O2 -I/usr/include -I/usr/pkg/include' 'LDFLAGS=-L/usr/lib -Wl,-R/usr/lib -L/usr/pkg/lib -Wl,-R/usr/pkg/lib' 'LIBS=' 'CPPFLAGS=-I/usr/include -I/usr/pkg/include' 'CXX=c++' 'CXXFLAGS=-O2 -I/usr/include -I/usr/pkg/include' 'F77=f77' 'FFLAGS=-O' '--enable-ltdl-install=no' '--with-makedatprog=/usr/pkg/libexec/courier-authlib/makedatprog' '--with-userdb=/usr/pkg/etc/authlib/userdb' --cache-file=/dev/null --srcdir=. configure: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used. checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether build environment is sane... yes checking for a thread-safe mkdir -p... ./../install-sh -c -d checking for gawk... /usr/bin/awk checking whether make sets $(MAKE)... yes checking for i386-pc-dragonfly-strip... no checking for strip... strip checking for gawk... (cached) /usr/bin/awk checking for i386-pc-dragonfly-gcc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of cc... gcc3 checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether ln -s works... yes checking build system type... i386-unknown-dragonfly2.3.1 checking host system type... i386-pc-dragonfly checking for a sed that does not truncate output... /scratch/security/courier-authlib/work/.tools/bin/sed checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for ld used by cc... /scratch/security/courier-authlib/work/.wrapper/bin/ld checking if the linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) is GNU ld... yes checking for /scratch/security/courier-authlib/work/.wrapper/bin/ld option to reload object files... -r checking for BSD-compatible nm... nm checking how to recognize dependent libraries... pass_all checking how to run the C preprocessor... cc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking whether we are using the GNU C++ compiler... yes checking whether c++ accepts -g... yes checking dependency style of c++... gcc3 checking how to run the C++ preprocessor... c++ -E checking for i386-pc-dragonfly-g77... f77 checking whether we are using the GNU Fortran 77 compiler... no checking whether f77 accepts -g... no checking the maximum length of command line arguments... (cached) 262144 checking command to parse nm output from cc object... ok checking for objdir... .libs checking for i386-pc-dragonfly-ar... no checking for ar... ar checking for i386-pc-dragonfly-ranlib... no checking for ranlib... ranlib checking for i386-pc-dragonfly-strip... strip checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC checking if cc PIC flag -fPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking whether the cc linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by c++... /scratch/security/courier-authlib/work/.wrapper/bin/ld checking if the linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) is GNU ld... yes checking whether the c++ linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking for c++ option to produce PIC... -fPIC checking if c++ PIC flag -fPIC works... yes checking if c++ static flag -static works... yes checking if c++ supports -c -o file.o... yes checking whether the c++ linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for f77 option to produce PIC... -fPIC checking if f77 PIC flag -fPIC works... no checking if f77 static flag -static works... no checking if f77 supports -c -o file.o... no checking whether the f77 linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate checking for perl5... /usr/pkg/bin/perl checking for ANSI C header files... (cached) yes checking for sys/stat.h... (cached) yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking for unistd.h... (cached) yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking termios.h usability... yes checking termios.h presence... yes checking for termios.h... yes checking crypt.h usability... no checking crypt.h presence... no checking for crypt.h... no checking whether time.h and sys/time.h may both be included... yes checking for an ANSI C-conforming const... yes checking for pid_t... yes checking for uid_t in sys/types.h... yes checking return type of signal handlers... void checking for crypt in -lcrypt... yes checking for crypt... yes checking for crypt() prototype... 0 checking for isatty... yes checking for gettimeofday... yes checking for random source... /dev/urandom configure: creating ./config.status config.status: creating Makefile config.status: creating userdb.pl config.status: creating makeuserdb config.status: creating pw2userdb config.status: executing depfiles commands === configuring in rfc822 (/scratch/security/courier-authlib/work/courier-authlib-0.61.0/rfc822) configure: running /bin/sh ./configure '--prefix=/usr/pkg' '--with-mailuser=courier' '--with-mailgroup=mail' '--localstatedir=/var' '--with-pkgconfdir=/usr/pkg/etc/authlib' '--without-stdheaderdir' '--with-authdaemonvar=/var/authdaemon' '--with-authpwd' '--with-authshadow' '--with-authpipe' '--without-authpam' '--with-db=db' '--with-authuserdb' '--without-authldap' '--without-authmysql' '--without-authpgsql' '--without-authvchkpw' '--without-authcustom' '--host=i386-pc-dragonfly' '--mandir=/usr/pkg/man' 'host_alias=i386-pc-dragonfly' 'CC=cc' 'CFLAGS=-O2 -I/usr/include -I/usr/pkg/include' 'LDFLAGS=-L/usr/lib -Wl,-R/usr/lib -L/usr/pkg/lib -Wl,-R/usr/pkg/lib' 'LIBS=' 'CPPFLAGS=-I/usr/include -I/usr/pkg/include' 'CXX=c++' 'CXXFLAGS=-O2 -I/usr/include -I/usr/pkg/include' 'F77=f77' 'FFLAGS=-O' '--enable-ltdl-install=no' '--with-makedatprog=/usr/pkg/libexec/courier-authlib/makedatprog' '--with-userdb=/usr/pkg/etc/authlib/userdb' --cache-file=/dev/null --srcdir=. configure: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used. checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether build environment is sane... yes checking for a thread-safe mkdir -p... ./../install-sh -c -d checking for gawk... /usr/bin/awk checking whether make sets $(MAKE)... yes checking for i386-pc-dragonfly-strip... no checking for strip... strip checking for i386-pc-dragonfly-gcc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of cc... gcc3 checking for library containing strerror... none required checking how to run the C preprocessor... cc -E checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for AIX... no checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking minix/config.h usability... no checking minix/config.h presence... no checking for minix/config.h... no checking build system type... i386-unknown-dragonfly2.3.1 checking host system type... i386-pc-dragonfly checking for a sed that does not truncate output... /scratch/security/courier-authlib/work/.tools/bin/sed checking for ld used by cc... /scratch/security/courier-authlib/work/.wrapper/bin/ld checking if the linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) is GNU ld... yes checking for /scratch/security/courier-authlib/work/.wrapper/bin/ld option to reload object files... -r checking for BSD-compatible nm... nm checking whether ln -s works... yes checking how to recognize dependent libraries... pass_all checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking whether we are using the GNU C++ compiler... yes checking whether c++ accepts -g... yes checking dependency style of c++... gcc3 checking how to run the C++ preprocessor... c++ -E checking for i386-pc-dragonfly-g77... f77 checking whether we are using the GNU Fortran 77 compiler... no checking whether f77 accepts -g... no checking the maximum length of command line arguments... (cached) 262144 checking command to parse nm output from cc object... ok checking for objdir... .libs checking for i386-pc-dragonfly-ar... no checking for ar... ar checking for i386-pc-dragonfly-ranlib... no checking for ranlib... ranlib checking for i386-pc-dragonfly-strip... strip checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC checking if cc PIC flag -fPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking whether the cc linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by c++... /scratch/security/courier-authlib/work/.wrapper/bin/ld checking if the linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) is GNU ld... yes checking whether the c++ linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking for c++ option to produce PIC... -fPIC checking if c++ PIC flag -fPIC works... yes checking if c++ static flag -static works... yes checking if c++ supports -c -o file.o... yes checking whether the c++ linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for f77 option to produce PIC... -fPIC checking if f77 PIC flag -fPIC works... no checking if f77 static flag -static works... no checking if f77 supports -c -o file.o... no checking whether the f77 linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate checking for ANSI C header files... (cached) yes checking locale.h usability... yes checking locale.h presence... yes checking for locale.h... yes checking for an ANSI C-conforming const... yes checking for size_t... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for strcasecmp... yes checking for strncasecmp... yes checking for setlocale... yes checking how to calculate alternate timezone... daylight configure: creating ./config.status config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands === configuring in random128 (/scratch/security/courier-authlib/work/courier-authlib-0.61.0/random128) configure: running /bin/sh ./configure '--prefix=/usr/pkg' '--with-mailuser=courier' '--with-mailgroup=mail' '--localstatedir=/var' '--with-pkgconfdir=/usr/pkg/etc/authlib' '--without-stdheaderdir' '--with-authdaemonvar=/var/authdaemon' '--with-authpwd' '--with-authshadow' '--with-authpipe' '--without-authpam' '--with-db=db' '--with-authuserdb' '--without-authldap' '--without-authmysql' '--without-authpgsql' '--without-authvchkpw' '--without-authcustom' '--host=i386-pc-dragonfly' '--mandir=/usr/pkg/man' 'host_alias=i386-pc-dragonfly' 'CC=cc' 'CFLAGS=-O2 -I/usr/include -I/usr/pkg/include' 'LDFLAGS=-L/usr/lib -Wl,-R/usr/lib -L/usr/pkg/lib -Wl,-R/usr/pkg/lib' 'LIBS=' 'CPPFLAGS=-I/usr/include -I/usr/pkg/include' 'CXX=c++' 'CXXFLAGS=-O2 -I/usr/include -I/usr/pkg/include' 'F77=f77' 'FFLAGS=-O' '--enable-ltdl-install=no' '--with-makedatprog=/usr/pkg/libexec/courier-authlib/makedatprog' '--with-userdb=/usr/pkg/etc/authlib/userdb' --cache-file=/dev/null --srcdir=. configure: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used. checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether build environment is sane... yes checking for a thread-safe mkdir -p... ./../install-sh -c -d checking for gawk... /usr/bin/awk checking whether make sets $(MAKE)... yes checking for i386-pc-dragonfly-strip... no checking for strip... strip checking for style of include used by make... GNU checking for i386-pc-dragonfly-gcc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking dependency style of cc... gcc3 checking how to run the C preprocessor... cc -E checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for AIX... no checking for library containing strerror... none required checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking minix/config.h usability... no checking minix/config.h presence... no checking for minix/config.h... no checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether ln -s works... yes checking for i386-pc-dragonfly-gcc... (cached) cc checking whether we are using the GNU C compiler... (cached) yes checking whether cc accepts -g... (cached) yes checking for cc option to accept ISO C89... (cached) none needed checking dependency style of cc... (cached) gcc3 checking for ps... /bin/ps checking for w... /usr/bin/w checking build system type... i386-unknown-dragonfly2.3.1 checking host system type... i386-pc-dragonfly checking for a sed that does not truncate output... /scratch/security/courier-authlib/work/.tools/bin/sed checking for ld used by cc... /scratch/security/courier-authlib/work/.wrapper/bin/ld checking if the linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) is GNU ld... yes checking for /scratch/security/courier-authlib/work/.wrapper/bin/ld option to reload object files... -r checking for BSD-compatible nm... nm checking how to recognize dependent libraries... pass_all checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking whether we are using the GNU C++ compiler... yes checking whether c++ accepts -g... yes checking dependency style of c++... gcc3 checking how to run the C++ preprocessor... c++ -E checking for i386-pc-dragonfly-g77... f77 checking whether we are using the GNU Fortran 77 compiler... no checking whether f77 accepts -g... no checking the maximum length of command line arguments... (cached) 262144 checking command to parse nm output from cc object... ok checking for objdir... .libs checking for i386-pc-dragonfly-ar... no checking for ar... ar checking for i386-pc-dragonfly-ranlib... no checking for ranlib... ranlib checking for i386-pc-dragonfly-strip... strip checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC checking if cc PIC flag -fPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking whether the cc linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by c++... /scratch/security/courier-authlib/work/.wrapper/bin/ld checking if the linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) is GNU ld... yes checking whether the c++ linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking for c++ option to produce PIC... -fPIC checking if c++ PIC flag -fPIC works... yes checking if c++ static flag -static works... yes checking if c++ supports -c -o file.o... yes checking whether the c++ linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for f77 option to produce PIC... -fPIC checking if f77 PIC flag -fPIC works... no checking if f77 static flag -static works... no checking if f77 supports -c -o file.o... no checking whether the f77 linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate checking for sys/wait.h that is POSIX.1 compatible... yes checking for unistd.h... (cached) yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking for pid_t... yes checking for random source... /dev/urandom checking for some good options for ps... -afl configure: creating ./config.status config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands === configuring in liblock (/scratch/security/courier-authlib/work/courier-authlib-0.61.0/liblock) configure: running /bin/sh ./configure '--prefix=/usr/pkg' '--with-mailuser=courier' '--with-mailgroup=mail' '--localstatedir=/var' '--with-pkgconfdir=/usr/pkg/etc/authlib' '--without-stdheaderdir' '--with-authdaemonvar=/var/authdaemon' '--with-authpwd' '--with-authshadow' '--with-authpipe' '--without-authpam' '--with-db=db' '--with-authuserdb' '--without-authldap' '--without-authmysql' '--without-authpgsql' '--without-authvchkpw' '--without-authcustom' '--host=i386-pc-dragonfly' '--mandir=/usr/pkg/man' 'host_alias=i386-pc-dragonfly' 'CC=cc' 'CFLAGS=-O2 -I/usr/include -I/usr/pkg/include' 'LDFLAGS=-L/usr/lib -Wl,-R/usr/lib -L/usr/pkg/lib -Wl,-R/usr/pkg/lib' 'LIBS=' 'CPPFLAGS=-I/usr/include -I/usr/pkg/include' 'CXX=c++' 'CXXFLAGS=-O2 -I/usr/include -I/usr/pkg/include' 'F77=f77' 'FFLAGS=-O' '--enable-ltdl-install=no' '--with-makedatprog=/usr/pkg/libexec/courier-authlib/makedatprog' '--with-userdb=/usr/pkg/etc/authlib/userdb' --cache-file=/dev/null --srcdir=. configure: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used. checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether build environment is sane... yes checking for a thread-safe mkdir -p... ./../install-sh -c -d checking for gawk... /usr/bin/awk checking whether make sets $(MAKE)... yes checking for i386-pc-dragonfly-strip... no checking for strip... strip checking for gawk... (cached) /usr/bin/awk checking for i386-pc-dragonfly-gcc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of cc... gcc3 checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether ln -s works... yes checking build system type... i386-unknown-dragonfly2.3.1 checking host system type... i386-pc-dragonfly checking for a sed that does not truncate output... /scratch/security/courier-authlib/work/.tools/bin/sed checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for ld used by cc... /scratch/security/courier-authlib/work/.wrapper/bin/ld checking if the linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) is GNU ld... yes checking for /scratch/security/courier-authlib/work/.wrapper/bin/ld option to reload object files... -r checking for BSD-compatible nm... nm checking how to recognize dependent libraries... pass_all checking how to run the C preprocessor... cc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking whether we are using the GNU C++ compiler... yes checking whether c++ accepts -g... yes checking dependency style of c++... gcc3 checking how to run the C++ preprocessor... c++ -E checking for i386-pc-dragonfly-g77... f77 checking whether we are using the GNU Fortran 77 compiler... no checking whether f77 accepts -g... no checking the maximum length of command line arguments... (cached) 262144 checking command to parse nm output from cc object... ok checking for objdir... .libs checking for i386-pc-dragonfly-ar... no checking for ar... ar checking for i386-pc-dragonfly-ranlib... no checking for ranlib... ranlib checking for i386-pc-dragonfly-strip... strip checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC checking if cc PIC flag -fPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking whether the cc linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by c++... /scratch/security/courier-authlib/work/.wrapper/bin/ld checking if the linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) is GNU ld... yes checking whether the c++ linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking for c++ option to produce PIC... -fPIC checking if c++ PIC flag -fPIC works... yes checking if c++ static flag -static works... yes checking if c++ supports -c -o file.o... yes checking whether the c++ linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for f77 option to produce PIC... -fPIC checking if f77 PIC flag -fPIC works... no checking if f77 static flag -static works... no checking if f77 supports -c -o file.o... no checking whether the f77 linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate checking errno.h usability... yes checking errno.h presence... yes checking for errno.h... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking sys/fcntl.h usability... yes checking sys/fcntl.h presence... yes checking for sys/fcntl.h... yes checking sys/ioctl.h usability... yes checking sys/ioctl.h presence... yes checking for sys/ioctl.h... yes checking sys/file.h usability... yes checking sys/file.h presence... yes checking for sys/file.h... yes checking for unistd.h... (cached) yes checking sysexits.h usability... yes checking sysexits.h presence... yes checking for sysexits.h... yes checking for ANSI C header files... (cached) yes checking for sys/wait.h that is POSIX.1 compatible... yes checking for an ANSI C-conforming const... yes checking for off_t... yes checking for pid_t... yes checking return type of signal handlers... void checking for off64_t... no checking for flock_t... no checking for getdtablesize... yes checking for setpgrp... yes checking for sysconf... yes checking for setpgrp... (cached) yes checking whether setpgrp takes no argument... no checking for fcntl... yes checking for flock... yes checking for lockf... yes checking for locking method... fcntl configure: creating ./config.status config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands === configuring in liblog (/scratch/security/courier-authlib/work/courier-authlib-0.61.0/liblog) configure: running /bin/sh ./configure '--prefix=/usr/pkg' '--with-mailuser=courier' '--with-mailgroup=mail' '--localstatedir=/var' '--with-pkgconfdir=/usr/pkg/etc/authlib' '--without-stdheaderdir' '--with-authdaemonvar=/var/authdaemon' '--with-authpwd' '--with-authshadow' '--with-authpipe' '--without-authpam' '--with-db=db' '--with-authuserdb' '--without-authldap' '--without-authmysql' '--without-authpgsql' '--without-authvchkpw' '--without-authcustom' '--host=i386-pc-dragonfly' '--mandir=/usr/pkg/man' 'host_alias=i386-pc-dragonfly' 'CC=cc' 'CFLAGS=-O2 -I/usr/include -I/usr/pkg/include' 'LDFLAGS=-L/usr/lib -Wl,-R/usr/lib -L/usr/pkg/lib -Wl,-R/usr/pkg/lib' 'LIBS=' 'CPPFLAGS=-I/usr/include -I/usr/pkg/include' 'CXX=c++' 'CXXFLAGS=-O2 -I/usr/include -I/usr/pkg/include' 'F77=f77' 'FFLAGS=-O' '--enable-ltdl-install=no' '--with-makedatprog=/usr/pkg/libexec/courier-authlib/makedatprog' '--with-userdb=/usr/pkg/etc/authlib/userdb' --cache-file=/dev/null --srcdir=. configure: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used. checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether build environment is sane... yes checking for a thread-safe mkdir -p... ./../install-sh -c -d checking for gawk... /usr/bin/awk checking whether make sets $(MAKE)... yes checking for i386-pc-dragonfly-strip... no checking for strip... strip checking for i386-pc-dragonfly-gcc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of cc... gcc3 checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether ln -s works... yes checking build system type... i386-unknown-dragonfly2.3.1 checking host system type... i386-pc-dragonfly checking for a sed that does not truncate output... /scratch/security/courier-authlib/work/.tools/bin/sed checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for ld used by cc... /scratch/security/courier-authlib/work/.wrapper/bin/ld checking if the linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) is GNU ld... yes checking for /scratch/security/courier-authlib/work/.wrapper/bin/ld option to reload object files... -r checking for BSD-compatible nm... nm checking how to recognize dependent libraries... pass_all checking how to run the C preprocessor... cc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking whether we are using the GNU C++ compiler... yes checking whether c++ accepts -g... yes checking dependency style of c++... gcc3 checking how to run the C++ preprocessor... c++ -E checking for i386-pc-dragonfly-g77... f77 checking whether we are using the GNU Fortran 77 compiler... no checking whether f77 accepts -g... no checking the maximum length of command line arguments... (cached) 262144 checking command to parse nm output from cc object... ok checking for objdir... .libs checking for i386-pc-dragonfly-ar... no checking for ar... ar checking for i386-pc-dragonfly-ranlib... no checking for ranlib... ranlib checking for i386-pc-dragonfly-strip... strip checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC checking if cc PIC flag -fPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking whether the cc linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by c++... /scratch/security/courier-authlib/work/.wrapper/bin/ld checking if the linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) is GNU ld... yes checking whether the c++ linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking for c++ option to produce PIC... -fPIC checking if c++ PIC flag -fPIC works... yes checking if c++ static flag -static works... yes checking if c++ supports -c -o file.o... yes checking whether the c++ linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for f77 option to produce PIC... -fPIC checking if f77 PIC flag -fPIC works... no checking if f77 static flag -static works... no checking if f77 supports -c -o file.o... no checking whether the f77 linker (/scratch/security/courier-authlib/work/.wrapper/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate checking for an ANSI C-conforming const... yes checking for ANSI C header files... (cached) yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking for string.h... (cached) yes checking syslog.h usability... yes checking syslog.h presence... yes checking for syslog.h... yes checking for uid_t in sys/types.h... yes checking for strchr... yes configure: creating ./config.status config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands => Modifying libtool scripts to use pkgsrc libtool WARNING: *** Please consider adding fortran to USE_LANGUAGES in the package Makefile.