Copyright (c) 2003-2026 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly 6.5-DEVELOPMENT #1: Mon Jun 15 21:49:46 CEST 2026
    root@zenbook.toret.fr:/usr/obj/usr/src/sys/X86_64_GENERIC
acpi_hpet: frequency 24000000
TSC crystal clock: 24000000 Hz, TSC/crystal ratio: 242/2
TSC clock: 2904000000 Hz, invariant
CPU: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz (2904.00-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x806e9  Family=0x6  Model=0x8e  Stepping=9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x77fafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,AVX,F16C,RDRAND>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XGETBV,XSAVES>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0x29c67af<GSFSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ENHMOVSB,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
  Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD>
  Thermal and PM Features=0x27f7<SENSOR,TURBO,ARAT,PLN,ECMD,PTM,HWP>
  MONITOR/MWAIT Features=0x3<CST,INTBRK>
  VT-x: Basic Features=0xda0400<SMM,INS/OUTS,TRUE>
        Pin-Based Controls=0x7f<ExtINT,NMI,VNMI,PreTmr>
        Primary Processor Controls=0xfff9fffe<INTWIN,TSCOff,HLT,INVLPG,MWAIT,RDPMC,RDTSC,CR3-LD,CR3-ST,CR8-LD,CR8-ST,TPR,NMIWIN,MOV-DR,IO,IOmap,MTF,MSRmap,MONITOR,PAUSE>
        Secondary Processor Controls=0x5fbcff<APIC,EPT,DT,RDTSCP,x2APIC,VPID,WBINVD,UG,PAUSE-loop,RDRAND,INVPCID,VMFUNC,EPT#VE,XSAVES>
        Exit Controls=0x1ffffff<DR,PERF,HostLMA,AckInt,PAT-SV,PAT-LD,EFER-SV,EFER-LD,PTMR-SV>
        Entry Controls=0x3ffff<DR,GuestLMA,PERF,PAT,EFER>
        EPT Features=0x6734141<XO,PW4,UC,WB,2M,1G,INVEPT,AD,single,all>
        VPID Features=0xf01<INVVPID,individual,single,all,single-globals>
CPU Special Features Installed: SMAP SMEP
real memory  = 8469602304 (8077 MB)
avail memory = 8108232704 (7732 MB)
LAPIC: enter X2APIC mode
madt_lapic_probe: lapic_count=4 x2apic_count=0
ACPI CPUS = 4
lapic: TSC Deadline Mode: frequency 2904000000 Hz
CPU Topology: cores_per_chip: 2; threads_per_core: 2; chips_per_package: 1;
srat_probe: can't locate SRAT
Initialize MI interrupts for 4 cpus
TSC testing MP synchronization ...
TSC testing MP: NOTE! CPU pwrsave will inflate latencies!
TSC cpu-delta WAS NEGATIVE! cpu 1 to 0 (-34175485)
TSC cpu-delta test complete, 6352184598373063405ns to 11774346ns FAILURE
TSC cpu concurrency test complete, worst=11770492ns, avg=2942650ns INDETERMINATE
TSC cpu concurrency test complete, worst=11770548ns, avg=2942649ns INDETERMINATE
TSC cpu concurrency test complete, worst=11770548ns, avg=2942648ns INDETERMINATE
TSC cpu concurrency test complete, worst=11770548ns, avg=2942649ns INDETERMINATE
TSC is not MP synchronized
Spectre: support=( IBRS STIBP IBPB ) req=0000 operating=( none )
MDS: support=( none ) req=ffff operating=( none )
machdep.meltdown_mitigation enabled to protect against (mostly Intel) meltdown bug
system call performance will be impacted
interrupt uses mplock: swi_taskq
wdog: In-kernel automatic watchdog reset enabled
firmware_register: image i915fw_kbl_dmc_ver1_04 already registered!
module_register_init: MOD_LOAD (i915fw_kbl_dmc_ver1_fw, ffffffff82337360, 0) error 6
md0: Malloc disk
evdev device loaded.
kbd1 at kbdmux0
ACPI: RSDP 0x000000009AA5C000 000024 (v02 _ASUS_)
ACPI: XSDT 0x000000009AA5C0B0 0000DC (v01 _ASUS_ Notebook 01072009 AMI  00010013)
ACPI: FACP 0x000000009AA87450 000114 (v06 _ASUS_ Notebook 01072009 AMI  00010013)
ACPI: DSDT 0x000000009AA5C218 02B233 (v02 _ASUS_ Notebook 01072009 INTL 20160422)
ACPI: FACS 0x000000009AE7BC40 000040
ACPI: APIC 0x000000009AA87568 000084 (v03 _ASUS_ Notebook 01072009 AMI  00010013)
ACPI: FPDT 0x000000009AA875F0 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
ACPI: ECDT 0x000000009AA87638 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
ACPI: MCFG 0x000000009AA87700 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
ACPI: SSDT 0x000000009AA87740 000359 (v01 SataRe SataTabl 00001000 INTL 20160422)
ACPI: FIDT 0x000000009AA87AA0 00009C (v01 _ASUS_ Notebook 01072009 AMI  00010013)
ACPI: SSDT 0x000000009AA87B40 005F8D (v02 DptfTa DptfTabl 00001000 INTL 20160422)
ACPI: MSDM 0x000000009AA8DAD0 000055 (v03 _ASUS_ Notebook 01072009 ASUS 00000001)
ACPI: SSDT 0x000000009AA8DB28 003159 (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
ACPI: HPET 0x000000009AA90C88 000038 (v01 INTEL  KBL-ULT  00000001 MSFT 0000005F)
ACPI: UEFI 0x000000009AA90CC0 000042 (v01 INTEL  EDK2     00000002      01000013)
ACPI: SSDT 0x000000009AA90D08 000EDE (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
ACPI: LPIT 0x000000009AA91BE8 000094 (v01 INTEL  KBL-ULT  00000000 MSFT 0000005F)
ACPI: WSMT 0x000000009AA91C80 000028 (v01 INTEL  KBL-ULT  00000000 MSFT 0000005F)
ACPI: SSDT 0x000000009AA91CA8 000141 (v02 INTEL  HdaDsp   00000000 INTL 20160422)
ACPI: SSDT 0x000000009AA91DF0 00029F (v02 INTEL  sensrhub 00000000 INTL 20160422)
ACPI: SSDT 0x000000009AA92090 000215 (v02 INTEL  TbtTypeC 00000000 INTL 20160422)
ACPI: DBGP 0x000000009AA922A8 000034 (v01 INTEL           00000002 MSFT 0000005F)
ACPI: DBG2 0x000000009AA922E0 000054 (v00 INTEL           00000002 MSFT 0000005F)
ACPI: BGRT 0x000000009AA92338 000038 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
ACPI: DMAR 0x000000009AA92370 0000F0 (v01 INTEL  KBL      00000001 INTL 00000001)
ACPI: TPM2 0x000000009AA92460 000034 (v03        Tpm2Tabl 00000001 AMI  00000000)
sc0: <System console> on motherboard
sc0: EFI_FB <16 virtual consoles, flags=0x700>
acpi0: <_ASUS_ Notebook> on motherboard
ACPI: 8 ACPI AML tables successfully acquired and loaded
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI select level/high
acpi_ec0: <Embedded Controller: GPE 0x50, ECDT> port 0x66,0x62 on acpi0
acpi0: Power Button (fixed)
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_timer0 on acpi0
cpu0: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFF800D2715800 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFF800DAAD1880 0006F6 (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
cpu_cst0: <ACPI CPU C-State> on cpu0
cpu_pst0: <ACPI CPU P-State> on cpu0
clockmod0: <CPU clock modulation> on cpu0
perfbias0: <CPU perf-energy bias> on cpu0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
corecstat0: <CPU Package C-State residency counters> on cpu0
device_probe_and_attach: corecstat0 attach returned 6
cpu1: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFF800D25A6880 00065C (v02 PmRef  ApIst    00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFF8005D2CB360 00018A (v02 PmRef  ApCst    00003000 INTL 20160422)
cpu_cst1: <ACPI CPU C-State> on cpu1
cpu_pst1: <ACPI CPU P-State> on cpu1
clockmod1: <CPU clock modulation> on cpu1
perfbias1: <CPU perf-energy bias> on cpu1
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
corecstat1: <CPU Package C-State residency counters> on cpu1
device_probe_and_attach: corecstat1 attach returned 6
cpu2: <ACPI CPU> on acpi0
cpu_cst2: <ACPI CPU C-State> on cpu2
cpu_pst2: <ACPI CPU P-State> on cpu2
clockmod2: <CPU clock modulation> on cpu2
perfbias2: <CPU perf-energy bias> on cpu2
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
corecstat2: <CPU Package C-State residency counters> on cpu2
cpu3: <ACPI CPU> on acpi0
cpu_cst3: <ACPI CPU C-State> on cpu3
cpu_pst3: <ACPI CPU P-State> on cpu3
clockmod3: <CPU clock modulation> on cpu3
perfbias3: <CPU perf-energy bias> on cpu3
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
corepower0: <CPU On-Die Power Usage Estimation> on cpu3
corecstat3: <CPU Package C-State residency counters> on cpu3
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
battery0: supports extended information
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xd0000000-0xdfffffff,0xee000000-0xeeffffff at device 2.0 on pci0
vgapci0: Boot video device
pci0: <dasp> (vendor 0x8086, dev 0x1903) at device 4.0
xhci0: <Intel Sunrise Point-LP USB 3.0 controller> mem 0xef110000-0xef11ffff at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <dasp> (vendor 0x8086, dev 0x9d31) at device 20.2
pci0: <dasp> (vendor 0x8086, dev 0x9d60) at device 21.0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
pci0: <dasp> (vendor 0x8086, dev 0x9d61) at device 21.1
pci0: <simple comms> (vendor 0x8086, dev 0x9d3a) at device 22.0
ahci0: <AHCI-PCI-SATA> port 0xf060-0xf07f,0xf080-0xf083,0xf090-0xf097 mem 0xef133000-0xef1337ff,0xef134000-0xef1340ff,0xef130000-0xef131fff at device 23.0 on pci0
ahci0: Intel hocus pocus
ahci0: AHCI 1.3.1 cap 0xc734ff00<S64A,NCQ,SALP,SAL,SCLO,SAM,PMD,SSC,PSC> cap2 0x3c<DESO,SADM,SDS,APST>, 1 ports, 32 tags/port, gen 3 (6Gbps)
uhub0: 18 ports with 18 removable, self powered
ugen0.2: <Logitech> at usbus0
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/30.00, addr 1> on usbus0
ugen0.3: <Chicony Electronics Co.,Ltd.> at usbus0
ugen0.4: <vendor 0x8087> at usbus0
ugen0.5: <ELAN> at usbus0
ahci0.0: Found SSD "SanDisk SD9SN8W256G1002 X6103002" serial="184266801186"
ahci0.0: tags=32/32 satacap=850e satacap2=0006 satafea=016c NCQ=YES capacity=244198.33MB
ahci0.0: f85=3069 f86=b409 f87=4123 WC=enabled RA=enabled SEC=frozen
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 28.6 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network> (vendor 0x8086, dev 0x08b1) at device 0.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
pci0: <memory> (vendor 0x8086, dev 0x9d21) at device 31.2
pci0: <multimedia, HDA> (vendor 0x8086, dev 0x9d71) at device 31.3
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x9d23) at device 31.4
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: current command byte:0065
psm0: failed to reset the aux device.
ACPI: Enabled 5 GPEs in block 00 to 7F
rdrand0: <RdRand RNG> on motherboard
sio0: can't drain, serial port might not exist, disabling
sio1: can't drain, serial port might not exist, disabling
hpt27xx: no controller detected.
CAM: Configuring 1 busses
CAM: finished configuring all busses
da0 at ahci0 bus 0 target 0 lun 0
da0: <SATA SanDisk SD9SN8W2 X610> Fixed Direct Access SCSI-4 device 
da0: Serial Number 184266801186
da0: 600.000MB/s transfers
da0: 244198MB (500118192 512 byte sectors: 255H 63S/T 31130C)
da0: supports TRIM
Mounting root from hammer2:serno/184266801186.s1d
hammer2_mount: root devstr="serno/184266801186.s1d"
hammer2_mount: device="serno/184266801186.s1d" label="ROOT" rdonly=1
hammer2_ondisk: "/dev/serno/184266801186.s1d" zone=0 id=0 offset=0x0000000000000000 size=0x0000003916000000
hammer2_mount: hmp=0xfffff800dc100000 pmp=0xfffff800dc8a0000
DMA space used: 4608k, remaining available: 131072k
Mounting devfs
hammer2_mount: "serno/184266801186.s1d": no recovery needed
hammer2: enable read/write
HAMMER2: VOLDATA DUMP
HAMMER2: INITIATE SPANs
acpi_video0: <ACPI video extension> on vgapci0
[drm] Got Intel graphics stolen memory base 0x9c000000, size 0x4000000
drm0 on vgapci0
[drm] pdev:  vendor=0x8086  device=0x5916 rev=0x02
[drm]       svendor=0x1043 sdevice=0x1520 irq=16
[drm:gen8_gmch_probe] *ERROR* Can't set DMA mask/consistent mask (-5)
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm:parse_csr_fw] *ERROR* DMC firmware has wrong CSS header length (691100964 bytes)
drm0: Failed to load DMC firmware i915fw_kbl_dmc_ver1_04. Disabling runtime power management.
drm0: DMC firmware homepage: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915tunable drm.video.eDP-1 is not set
tunable drm.video.HDMI-A-1 is not set
RPM wakelock ref not held during HW access<6>[drm] taking over the fictitious range 0xd0000000-0x10000000
drm: expand RCU cpu 0 to 16
[drm] Initialized i915 1.6.0 20180921 for dev_name on minor 0
kms console: xpixels 1920 ypixels 1080 depth 32
[drm] DRM_I915_DEBUG_GEM enabled
iwm0: <Intel(R) Dual Band Wireless AC 7260> mem 0xef000000-0xef001fff at device 0.0 on pci2
iwm7260fw: could not load firmware image, error 17
iwm0: could not read firmware iwm7260fw (error 0)
device_probe_and_attach: iwm0 attach returned 6
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/30.00, addr 1> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=0
swap low/high-water marks set to 83883/125825
drm: expand RCU cpu 0 to 32
drm: expand RCU cpu 2 to 16
drm: expand RCU cpu 1 to 16
drm: expand RCU cpu 1 to 32
drm: expand RCU cpu 1 to 64
drm: expand RCU cpu 0 to 64
iichid0: <I2C HID device> irq 109 i2c 21 on acpi0
iichid0: Can't allocate I2C HID slave
device_probe_and_attach: iichid0 attach returned 12
drm: expand RCU cpu 3 to 16
iwm0: <Intel(R) Dual Band Wireless AC 7260> mem 0xef000000-0xef001fff at device 0.0 on pci2
iwm0: hw rev 0x140, fw ver 17.352738.0, address 58:91:cf:b6:30:d7
wlan0: MAC address: 58:91:cf:b6:30:d7