Copyright (c) 2003-2023 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly 6.5-DEVELOPMENT #0: Sun Jan 21 12:02:28 UTC 2024
    root@elitebook:/usr/obj/usr/src/sys/X86_64_GENERIC
acpi_hpet: frequency 14318180
Using cputimer HPET for TSC calibration
Timer latency (in TSC ticks): 2582 min=2499 max=2583
TSC invariant clock: 2099997643 Hz
CPU: AMD Ryzen 5 PRO 3500U w/ Radeon Vega Mobile Gfx (2100.00-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x810f81  Family=0x17  Model=0x18  Stepping=1
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x76d8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,AVX,F16C,RDRND>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XGETBV,XSAVES>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCX_CORE,PCX_NB,DBE,PCX_L2I,MWAITX>
  Structured Extended Features=0x209c01a9<GSFSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA>
  Thermal and PM Features=0x4<ARAT>
  MONITOR/MWAIT Features=0x3<CST,INTBRK>
CPU Special Features Installed: SMAP SMEP
real memory  = 14962475008 (14269 MB)
avail memory = 14370779136 (13705 MB)
madt_lapic_probe: lapic_count=8 x2apic_count=0
ACPI CPUS = 8
   LAPIC AMD elvt0: 0x00010000
   LAPIC AMD elvt1: 0x00010000
   LAPIC AMD elvt2: 0x00010000
   LAPIC AMD elvt3: 0x00010000
LAPIC latency (in TSC ticks): 216 min: 210 max: 315
lapic: divisor index 0, frequency 12499986 Hz
core_bits 4 logical_CPU_bits 0
2-way htt, 1 Nodes, 8 cores/node
CPU Topology: cores_per_chip: 4; threads_per_core: 2; chips_per_package: 1;
Compute unit iDS:
0-0; 
srat_probe: can't locate SRAT
Initialize MI interrupts for 8 cpus
TSC testing MP synchronization ...
TSC testing MP: NOTE! CPU pwrsave will inflate latencies!
TSC cpu-delta test complete, 2480nS to 5360nS SUCCESS
TSC cpu-delta test complete, 1870nS to 3370nS SUCCESS
TSC cpu-delta test complete, 1810nS to 3510nS SUCCESS
TSC cpu-delta test complete, 1910nS to 3380nS SUCCESS
TSC cpu concurrency test complete, worst=270ns, avg=77ns SUCCESS
TSC is MP synchronized
TSC: cputimer freq 2099997643
Spectre: support=( IBPB ) req=0000 operating=( none )
MDS: support=( MDS_NOT_REQUIRED ) req=0000 operating=( none )
interrupt uses mplock: swi_taskq
wdog: In-kernel automatic watchdog reset enabled
md0: Malloc disk
evdev device loaded.
kbd1 at kbdmux0
ACPI: RSDP 0x000000003974D014 000024 (v02 HPQOEM)
ACPI: XSDT 0x000000003971F188 000124 (v01 HPQOEM SLIC-BPC 00000001      01000013)
ACPI: FACP 0x000000003973D000 00010C (v05 HPQOEM SLIC-BPC 00000001 HP   00000001)
ACPI: DSDT 0x0000000039725000 010DE9 (v02 HPQOEM 8589     00000000 INTL 20160527)
ACPI: FACS 0x0000000039614000 000040
ACPI: SSDT 0x000000003974B000 0002D7 (v01 HP     NVTEC    00000001 INTL 20160527)
ACPI: SSDT 0x000000003974A000 00012A (v02 HP     ShmTable 00000001 INTL 20160527)
ACPI: SSDT 0x0000000039744000 005419 (v02 AMD    AmdTable 00000002 MSFT 02000002)
ACPI: UEFI 0x000000003962F000 000042 (v01 HPQOEM EDK2     00000002      01000013)
ACPI: RTMA 0x0000000039742000 00009E (v01 HP     _HBMART_ 00001000 HP   00000001)
ACPI: SSDT 0x0000000039740000 001575 (v02 HP     UcsiAcpi 00000001 INTL 20160527)
ACPI: SSDT 0x000000003973F000 0000FB (v02 HP     UcsiCntr 00000001 INTL 20160527)
ACPI: OEML 0x000000003973E000 000028 (v03 HPQOEM EDK2     00000002      01000013)
ACPI: ASF! 0x000000003973C000 00006E (v32 HPQOEM 8589     00000001 HP   00000001)
ACPI: MSDM 0x000000003973B000 000055 (v03 HPQOEM SLIC-BPC 00000000 HP   00000001)
ACPI: SLIC 0x000000003973A000 000176 (v01 HPQOEM SLIC-BPC 00000001 HP   00000001)
ACPI: WSMT 0x0000000039739000 000028 (v01 HPQOEM 8589     00000001 HP   00000001)
ACPI: HPET 0x0000000039738000 000038 (v01 HPQOEM 8589     00000001 HP   00000001)
ACPI: APIC 0x0000000039737000 000138 (v02 HPQOEM 8589     00000001 HP   00000001)
ACPI: MCFG 0x0000000039736000 00003C (v01 HPQOEM 8589     00000001 HP   00000001)
ACPI: SSDT 0x0000000039722000 00119C (v01 AMD    AMD CPU  00000001 AMD  00000001)
ACPI: CRAT 0x0000000039721000 000810 (v01 AMD    AMD CRAT 00000001 AMD  00000001)
ACPI: CDIT 0x0000000039720000 000029 (v01 AMD    AMD CDIT 00000001 AMD  00000001)
ACPI: SSDT 0x000000003974C000 00013B (v01 HP     HPNBCONV 00001000 INTL 20160527)
ACPI: SSDT 0x000000003971E000 000245 (v01 HP     AMDTPL   00001000 INTL 20160527)
ACPI: SSDT 0x000000003971D000 00097D (v01 HP     HPADNBWL 00001000 INTL 20160527)
ACPI: SSDT 0x000000003971C000 000032 (v01 HP     HPCONDEV 00001000 INTL 20160527)
ACPI: SSDT 0x000000003971B000 000069 (v01 HP     HPCAHWID 00001000 INTL 20160527)
ACPI: VFCT 0x000000003970D000 00D484 (v01 HPQOEM SLIC-BPC 00000001 AMD  31504F47)
ACPI: SSDT 0x0000000039724000 000949 (v01 AMD    AmdTable 00000001 INTL 20160527)
ACPI: FPDT 0x000000003970C000 000044 (v01 HPQOEM EDK2     00000002      01000013)
ACPI: SSDT 0x0000000039709000 00255E (v01 AMD    AmdTable 00000001 INTL 20160527)
ACPI: BGRT 0x0000000039708000 000038 (v01 HPQOEM EDK2     00000002      01000013)
ACPI: SSDT 0x0000000039707000 000668 (v01 AMD    AmdTable 00000001 INTL 20160527)
ACPI: SSDT 0x0000000039743000 0002F9 (v02 HP     PwrCtlEv 00000001 INTL 20160527)
ACPI: IVRS 0x0000000039706000 00013E (v02 AMD    AMD IVRS 00000001 AMD  00000000)
sc0: <System console> on motherboard
sc0: EFI_FB <16 virtual consoles, flags=0x700>
cryptosoft0: <software crypto> on motherboard
acpi0: <HPQOEM SLIC-BPC> on motherboard
Firmware Error (ACPI): Could not resolve symbol [\_SB.PCI0.LPC0.EC0], AE_NOT_FOUND (20211217/dswload2-315)
ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20211217/psobject-372)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010)
ACPI: 16 ACPI AML tables successfully acquired and loaded
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI select level/low
acpi0: Power Button (fixed)
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_timer0 on acpi0
cpu0: <ACPI CPU> on acpi0
cpu_cst0: <ACPI CPU C-State> on cpu0
cpu_pst0: <ACPI CPU P-State> on cpu0
cpu1: <ACPI CPU> on acpi0
cpu_cst1: <ACPI CPU C-State> on cpu1
cpu_pst1: <ACPI CPU P-State> on cpu1
cpu2: <ACPI CPU> on acpi0
cpu_cst2: <ACPI CPU C-State> on cpu2
cpu_pst2: <ACPI CPU P-State> on cpu2
cpu3: <ACPI CPU> on acpi0
cpu_cst3: <ACPI CPU C-State> on cpu3
cpu_pst3: <ACPI CPU P-State> on cpu3
cpu4: <ACPI CPU> on acpi0
cpu_cst4: <ACPI CPU C-State> on cpu4
cpu_pst4: <ACPI CPU P-State> on cpu4
cpu5: <ACPI CPU> on acpi0
cpu_cst5: <ACPI CPU C-State> on cpu5
cpu_pst5: <ACPI CPU P-State> on cpu5
cpu6: <ACPI CPU> on acpi0
cpu_cst6: <ACPI CPU C-State> on cpu6
cpu_pst6: <ACPI CPU P-State> on cpu6
cpu7: <ACPI CPU> on acpi0
cpu_cst7: <ACPI CPU C-State> on cpu7
cpu_pst7: <ACPI CPU P-State> on cpu7
acpi_ec0: <Embedded Controller: GPE 0x3> port 0x66,0x62 on acpi0
acpi_button0: <Power Button> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
battery0: supports extended information
acpi_acad0: <AC Adapter> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
acpi_tz3: <Thermal Zone> on acpi0
acpi_tz4: <Thermal Zone> on acpi0
acpi_tz5: <Thermal Zone> on acpi0
Firmware Error (ACPI): AE_AML_PACKAGE_LIMIT, Index (0x000000005) is beyond end of object (length 0x5) (20211217/exoparg2-571)
ACPI Error: Aborting method \_TZ.GETP due to previous error (AE_AML_PACKAGE_LIMIT) (20211217/psparse-689)
ACPI Error: Aborting method \_TZ.CHGZ._CRT due to previous error (AE_AML_PACKAGE_LIMIT) (20211217/psparse-689)
acpi_tz6: <Thermal Zone> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
amdsmn0: <AMD Family 17h System Management Network> on hostb0
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb0
amdtemp0: sc_ccd_offset = 00000300
pci0: <base peripheral> (vendor 0x1022, dev 0x15d1) at device 0.2
pcib1: <ACPI PCI-PCI bridge> at device 1.3 on pci0
pci1: <ACPI PCI bus> on pcib1
re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> port 0x4300-0x43ff mem 0xf0900000-0xf0903fff,0xf0914000-0xf0914fff at device 0.0 on pci1
re0: MAC version 0x50200000, MACFG 67, support MSI
re0: bus speed 125MHz
re0: MAC address: 84:2a:fd:c8:9b:ee
pci1: <simple comms, UART> (vendor 0x10ec, dev 0x816a) at device 0.1
pci1: <simple comms, UART> (vendor 0x10ec, dev 0x816b) at device 0.2
pci1: <serial bus> (vendor 0x10ec, dev 0x816c) at device 0.3
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf0910000-0xf0913fff,0xf0918000-0xf0918fff at device 0.4 on pci1
ehci0: pre-2.0 USB revision (ignored)
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
nvme0: <NVME-PCIe> mem 0xf0700000-0xf0703fff at device 0.0 on pci3
nvme0: mapped 9 MSIX IRQs
ugen0.1: <0x10ec> at usbus0
uhub0: <0x10ec EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
nvme0: NVME Version 1.3 maxqe=16384 caps=000000303c033fff
nvme0: Model SAMSUNG_MZVLQ256HAJD-000H1 BaseSerial S4UJNF2N788664 nscount=1
nvme0: Request 16/8 queues, Returns 12/8 queues, nominal map 1:1 cpu
nvme0: Interrupt Coalesce: 100uS / 4 qentries
nvme0: Disk nvme0 ns=1 blksize=512 lbacnt=500118192 cap=238GB serno=S4UJNF2N788664-1
pcib4: <ACPI PCI-PCI bridge> at device 8.1 on pci0
pci4: <ACPI PCI bus> on pcib4
(PCIB_BCR_VGA_ENABLE) config = 0
vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0xf0600000-0xf067ffff,0xf0000000-0xf01fffff,0xe0000000-0xefffffff at device 0.0 on pci4
(PCIB_BCR_VGA_ENABLE) config = 0
pci4: <multimedia, HDA> (vendor 0x1002, dev 0x15de) at device 0.1
pci4: <encrypt/decrypt> (vendor 0x1022, dev 0x15df) at device 0.2
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xf0200000-0xf02fffff at device 0.3 on pci4
xhci0: 64 bytes context size, 64-bit DMA
usbus1 on xhci0
usbus1: 5.0Gbps Super Speed USB v3.0
xhci1: 64 bytes context size, 64-bit DMA
ugen1.1: <0x1022> at usbus1
uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
usbus2 on xhci1
usbus2: 5.0Gbps Super Speed USB v3.0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
uhub0: 1 port with 1 removable, self powered
uhub2: 3 ports with 3 removable, self powered
uhub1: 8 ports with 8 removable, self powered
ugen2.2: <vendor 0x05e3> at usbus2
uhub3: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/60.60, addr 1> on usbus2
uhub3: MTT enabled
psm0: <PS/2 Mouse> irq 12 on atkbdc0
interrupt uses mplock: psm0
psm0: model Synaptics Touchpad, device ID 0
ACPI: Enabled 7 GPEs in block 00 to 1F
aesni0: <AES-CBC,AES-XTS> on motherboard
padlock0: No ACE support.
rdrand0: <RdRand RNG> on motherboard
Firmware Error (ACPI): AE_AML_PACKAGE_LIMIT, Index (0x000000005) is beyond end of object (length 0x5) (20211217/exoparg2-571)
ACPI Error: Aborting method \_TZ.GTTP due to previous error (AE_AML_PACKAGE_LIMIT) (20211217/psparse-689)
ACPI Error: Aborting method \_TZ.CHGZ._TMP due to previous error (AE_AML_PACKAGE_LIMIT) (20211217/psparse-689)
sio0: can't drain, serial port might not exist, disabling
sio1: can't drain, serial port might not exist, disabling
uhub3: 4 ports with 0 removable, self powered
ugen1.2: <Microchip> at usbus1
uhub4: <Microchip HP USB-C Dock G5, class 9/0, rev 2.10/6.11, addr 1> on usbus1
hpt27xx: no controller detected.
CAM: Configuring 0 busses
Firmware Error (ACPI): AE_AML_PACKAGE_LIMIT, Index (0x000000005) is beyond end of object (length 0x5) (20211217/exoparg2-571)
ACPI Error: Aborting method \_TZ.GTTP due to previous error (AE_AML_PACKAGE_LIMIT) (20211217/psparse-689)
ACPI Error: Aborting method \_TZ.CHGZ._TMP due to previous error (AE_AML_PACKAGE_LIMIT) (20211217/psparse-689)
ugen2.3: <Realtek> at usbus2
uhub4: 5 ports with 1 removable, self powered
ugen2.4: <SunplusIT Inc> at usbus2
ugen1.3: <Generic> at usbus1
uhid0: <Generic USB Audio, class 0/0, rev 2.00/0.06, addr 2> on usbus1
ugen1.4: <Microchip Tech> at usbus1
uhub5: <Microchip Tech USB2734, class 9/0, rev 2.10/1.21, addr 3> on usbus1
uhub5: 4 ports with 4 removable, self powered
ugen1.5: <Logitech Inc> at usbus1
uhid1: <Logitech Inc Logitech H570e Stereo, class 0/0, rev 2.00/1.03, addr 4> on usbus1
ugen1.6: <HP> at usbus1
uhid2: <HID Interface> on usbus1
ugen1.7: <Microchip> at usbus1
uhub6: <Microchip HP USB-C Dock G5, class 9/0, rev 3.20/6.11, addr 6> on usbus1
uhub6: 4 ports with 1 removable, self powered
ugen1.8: <Microchip Tech> at usbus1
uhub7: <Microchip Tech USB5734, class 9/0, rev 3.20/1.21, addr 7> on usbus1
uhub7: 4 ports with 4 removable, self powered
Firmware Error (ACPI): AE_AML_PACKAGE_LIMIT, Index (0x000000005) is beyond end of object (length 0x5) (20211217/exoparg2-571)
ACPI Error: Aborting method \_TZ.GTTP due to previous error (AE_AML_PACKAGE_LIMIT) (20211217/psparse-689)
ACPI Error: Aborting method \_TZ.CHGZ._TMP due to previous error (AE_AML_PACKAGE_LIMIT) (20211217/psparse-689)
**WARNING** waiting for the following device to finish configuring:
  usb:	func=0xffffffff80a6f780 arg=0xfffff801410e0528
Firmware Error (ACPI): AE_AML_PACKAGE_LIMIT, Index (0x000000005) is beyond end of object (length 0x5) (20211217/exoparg2-571)
ACPI Error: Aborting method \_TZ.GTTP due to previous error (AE_AML_PACKAGE_LIMIT) (20211217/psparse-689)
ACPI Error: Aborting method \_TZ.CHGZ._TMP due to previous error (AE_AML_PACKAGE_LIMIT) (20211217/psparse-689)
**WARNING** waiting for the following device to finish configuring:
  usb:	func=0xffffffff80a6f780 arg=0xfffff801410e0528
**WARNING** waiting for the following device to finish configuring:
  usb:	func=0xffffffff80a6f780 arg=0xfffff801410e0528
Giving up, interrupt routing is probably hosed
Mounting root from ufs:serno/S4UJNF2N788664-1.s2d
DMA space used: 3292k, remaining available: 131072k
Mounting devfs
swap low/high-water marks set to 167769/251654
ugen1.9: <Unknown> at usbus1 (disconnected)
uaudio0: <HP USB-C Dock Audio Headset> on usbus1
uaudio0: Play: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio0: Record: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio0: No MIDI sequencer.
pcm0: <USB audio> on uaudio0
uaudio0: No HID volume keys found.
uaudio1: <Logitech Inc Logitech H570e Stereo, class 0/0, rev 2.00/1.03, addr 4> on usbus1
uaudio1: Play: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio1: Play: 44100 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio1: Play: 32000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio1: Play: 24000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio1: Play: 16000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio1: Play: 8000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio1: Record: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio1: Record: 44100 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio1: Record: 32000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio1: Record: 24000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio1: Record: 16000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio1: Record: 8000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio1: No MIDI sequencer.
pcm1: <USB audio> on uaudio1
uaudio1: HID volume keys found.
ugen1.2: <Microchip> at usbus1 (disconnected)
uhub4: at uhub1, port 1, addr 1 (disconnected)
ugen1.3: <Generic> at usbus1 (disconnected)
uaudio0: at uhub4, port 2, addr 2 (disconnected)
pcm0: detached
uaudio0: detached
uhid0: at uhub4, port 2, addr 2 (disconnected)
uhid0: detached
ugen1.4: <Microchip Tech> at usbus1 (disconnected)
uhub5: at uhub4, port 3, addr 3 (disconnected)
ugen1.5: <Logitech Inc> at usbus1 (disconnected)
uaudio1: at uhub5, port 1, addr 4 (disconnected)
pcm1: detached
uaudio1: detached
uhid1: at uhub5, port 1, addr 4 (disconnected)
uhid1: detached
uhub5: detached
ugen1.6: <HP> at usbus1 (disconnected)
uhid2: at uhub4, port 5, addr 5 (disconnected)
uhid2: detached
uhub4: detached
ugen1.7: <Microchip> at usbus1 (disconnected)
uhub6: at uhub1, port 5, addr 6 (disconnected)
ugen1.8: <Microchip Tech> at usbus1 (disconnected)
uhub7: at uhub6, port 3, addr 7 (disconnected)
uhub7: detached
uhub6: detached
system power profile changed to 'economy'
[drm] amdgpu kernel modesetting enabled.
drm0 on vgapci0
[drm] pdev:  vendor=0x1002  device=0x15d8 rev=0xd2
[drm]       svendor=0x103c sdevice=0x8589 irq=17
vgapci0: child drm0 requested pci_enable_io
vgapci0: child drm0 requested pci_enable_io
amdgpu_driver_load_kms(): flags=131094 drm_device=0xfffff8013c302e00 adev=0xfffff8031e020000
amdgpu_device_init: start
[drm] initializing kernel modesetting (RAVEN 0x1002:0x15D8 0x103C:0x8589 0xD2).
amdgpu_device_init: 1
[drm] register mmio base: 0xF0600000
[drm] register mmio size: 524288
pci_resource_flags: pdev=0xfffff8012f4ec800 bar=2 type=MEM
amdgpu_device_init: 2
amdgpu_device_init: for loop 0
amdgpu_device_init: for loop 1
amdgpu_device_init: for loop 2
amdgpu_device_init: for loop 3
amdgpu_device_init: for loop 4
amdgpu_device_init: rio_rid=32
amdgpu_device_init: mem_size=256
amdgpu_device_init: 3
[drm] add ip block number 0 <soc15_common>
[drm] add ip block number 1 <gmc_v9_0>
[drm] add ip block number 2 <vega10_ih>
[drm] add ip block number 3 <psp>
[drm] add ip block number 4 <gfx_v9_0>
[drm] add ip block number 5 <sdma_v4_0>
[drm] add ip block number 6 <powerplay>
[drm] add ip block number 7 <dm>
[drm] add ip block number 8 <vcn_v1_0>
[drm] VCN decode is enabled in VM mode
[drm] VCN encode is enabled in VM mode
[drm] VCN jpeg decode is enabled in VM mode
amdgpu_device_init: 4
amdgpu_device_init: 5
ATOM BIOS: SWBRT48929.001
amdgpu_device_init: 6
amdgpu_device_init: 6.1
amdgpu_device_init: 7
amdgpu_device_init: 8
[drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
amdgpu: No suitable DMA available.
amdgpu: No coherent DMA available.
drm0: info: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
drm0: info: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
drm0: info: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=256M
[drm] RAM width 128bits DDR4
[TTM] Zone  kernel: Available graphics memory: 65536 kiB
[TTM] Zone   dma32: Available graphics memory: 65536 kiB
[TTM] Initializing pool allocator
[drm] amdgpu: 2048M of VRAM memory ready
[drm] amdgpu: 3072M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x000000F4007E9000).
ttm_check_under_lowerlimit: stub
ttm_check_under_lowerlimit: stub
ttm_check_under_lowerlimit: stub
drm0: debug: fence driver on ring 0 use gpu addr 0x0000000000400040, cpu addr 0x0xffffb80000101040
ttm_check_under_lowerlimit: stub
drm0: debug: fence driver on ring 1 use gpu addr 0x00000000004000c0, cpu addr 0x0xffffb800001010c0
ttm_check_under_lowerlimit: stub
drm0: debug: fence driver on ring 2 use gpu addr 0x0000000000400140, cpu addr 0x0xffffb80000101140
ttm_check_under_lowerlimit: stub
drm0: debug: fence driver on ring 3 use gpu addr 0x00000000004001c0, cpu addr 0x0xffffb800001011c0
ttm_check_under_lowerlimit: stub
drm0: debug: fence driver on ring 4 use gpu addr 0x0000000000400240, cpu addr 0x0xffffb80000101240
ttm_check_under_lowerlimit: stub
drm0: debug: fence driver on ring 5 use gpu addr 0x00000000004002c0, cpu addr 0x0xffffb800001012c0
ttm_check_under_lowerlimit: stub
drm0: debug: fence driver on ring 6 use gpu addr 0x0000000000400340, cpu addr 0x0xffffb80000101340
ttm_check_under_lowerlimit: stub
drm0: debug: fence driver on ring 7 use gpu addr 0x00000000004003c0, cpu addr 0x0xffffb800001013c0
ttm_check_under_lowerlimit: stub
drm0: debug: fence driver on ring 8 use gpu addr 0x0000000000400440, cpu addr 0x0xffffb80000101440
ttm_check_under_lowerlimit: stub
ttm_check_under_lowerlimit: stub
drm0: debug: fence driver on ring 9 use gpu addr 0x00000000004004e0, cpu addr 0x0xffffb800001014e0
ttm_check_under_lowerlimit: stub
ttm_check_under_lowerlimit: stub
ttm_check_under_lowerlimit: stub
ttm_check_under_lowerlimit: stub
ttm_check_under_lowerlimit: stub
ttm_check_under_lowerlimit: stub
ttm_check_under_lowerlimit: stub
ttm_check_under_lowerlimit: stub
ttm_check_under_lowerlimit: stub
[drm] use_doorbell being set to: [true]
drm0: debug: fence driver on ring 10 use gpu addr 0x0000000000400560, cpu addr 0x0xffffb80000101560
ttm_check_under_lowerlimit: stub
amdgpu: [powerplay] powerplay sw init successfully
[drm] Found VCN firmware Version ENC: 1.15 DEC: 3 VEP: 0 Revision: 0
[drm] PSP loading VCN firmware
drm0: debug: fence driver on ring 11 use gpu addr 0x00000000004005e0, cpu addr 0x0xffffb800001015e0
ttm_check_under_lowerlimit: stub
drm0: debug: fence driver on ring 12 use gpu addr 0x0000000000400660, cpu addr 0x0xffffb80000101660
ttm_check_under_lowerlimit: stub
drm0: debug: fence driver on ring 13 use gpu addr 0x00000000004006e0, cpu addr 0x0xffffb800001016e0
ttm_check_under_lowerlimit: stub
drm0: debug: fence driver on ring 14 use gpu addr 0x0000000000400760, cpu addr 0x0xffffb80000101760
ttm_check_under_lowerlimit: stub
ttm_check_under_lowerlimit: stub
ttm_check_under_lowerlimit: stub
[drm] reserve 0x400000 from 0xf400b00000 for PSP TMR SIZE
[drm] DM_PPLIB: values for Invalid clock
[drm] DM_PPLIB:	 400000 in kHz
[drm] DM_PPLIB:	 933000 in kHz
[drm] DM_PPLIB:	 1067000 in kHz
[drm] DM_PPLIB:	 1200000 in kHz
[drm] DM_PPLIB: values for Invalid clock
[drm] DM_PPLIB:	 300000 in kHz
[drm] DM_PPLIB:	 600000 in kHz
[drm] DM_PPLIB:	 626000 in kHz
[drm] DM_PPLIB:	 654000 in kHz
[drm] Display Core initialized with v3.1.68!
tunable drm.video.eDP-1 is not set
[drm] SADs count is: -2, don't need to read it
tunable drm.video.DP-1 is not set
tunable drm.video.DP-2 is not set
tunable drm.video.DP-3 is not set
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] VCN decode and encode initialized successfully(under SPG Mode).
amdgpu_device_init: 9
ttm_check_under_lowerlimit: stub
[drm] amdgpu_device_init: Taking over the fictitious range 0xe0000000-0xf0000000
amdgpu_device_init: 10
(PCIB_BCR_VGA_ENABLE) config = 0
[drm] fb mappable at 0xE0F00000
[drm] vram apper at 0xE0000000
[drm] size 8294400
[drm] fb depth is 24
[drm]    pitch is 7680
!info->is_vga_boot_display
kms console: xpixels 1920 ypixels 1080
drm0: info: ring 0(gfx) uses VM inv eng 4 on hub 0
drm0: info: ring 1(comp_1.0.0) uses VM inv eng 5 on hub 0
drm0: info: ring 2(comp_1.1.0) uses VM inv eng 6 on hub 0
drm0: info: ring 3(comp_1.2.0) uses VM inv eng 7 on hub 0
drm0: info: ring 4(comp_1.3.0) uses VM inv eng 8 on hub 0
drm0: info: ring 5(comp_1.0.1) uses VM inv eng 9 on hub 0
drm0: info: ring 6(comp_1.1.1) uses VM inv eng 10 on hub 0
drm0: info: ring 7(comp_1.2.1) uses VM inv eng 11 on hub 0
drm0: info: ring 8(comp_1.3.1) uses VM inv eng 12 on hub 0
drm0: info: ring 9(kiq_2.1.0) uses VM inv eng 13 on hub 0
drm0: info: ring 10(sdma0) uses VM inv eng 4 on hub 1
drm0: info: ring 11(vcn_dec) uses VM inv eng 5 on hub 1
drm0: info: ring 12(vcn_enc0) uses VM inv eng 6 on hub 1
drm0: info: ring 13(vcn_enc1) uses VM inv eng 7 on hub 1
drm0: info: ring 14(vcn_jpeg) uses VM inv eng 8 on hub 1
[drm] Initialized amdgpu 3.27.0 20150101 for dev_name on minor 0
drm: expand RCU cpu 0 to 16
drm: expand RCU cpu 3 to 16
drm: expand RCU cpu 5 to 16
dma_fence_default_wait: lksleep err=-1
dma_fence_default_wait: lksleep err=-1
dma_fence_default_wait: lksleep err=-1
dma_fence_default_wait: lksleep err=-1
dma_fence_default_wait: lksleep err=-1
dma_fence_default_wait: lksleep err=-1
dma_fence_default_wait: lksleep err=-1
dma_fence_default_wait: lksleep err=-1
dma_fence_default_wait: lksleep err=-1
dma_fence_default_wait: lksleep err=-1
dma_fence_default_wait: lksleep err=-1
dma_fence_default_wait: lksleep err=-1
dma_fence_default_wait: lksleep err=-1
dma_fence_default_wait: lksleep err=-1
dma_fence_default_wait: lksleep err=-1
dma_fence_default_wait: lksleep err=-1
dma_fence_default_wait: lksleep err=-1
dma_fence_default_wait: lksleep err=-1
dma_fence_default_wait: lksleep err=-1
dma_fence_default_wait: lksleep err=-1
dma_fence_default_wait: lksleep err=-1
dma_fence_default_wait: lksleep err=-1
dma_fence_default_wait: lksleep err=-1
dma_fence_default_wait: lksleep err=-1
dma_fence_default_wait: lksleep err=-1
dma_fence_default_wait: lksleep err=-1
dma_fence_default_wait: lksleep err=-1
dma_fence_default_wait: lksleep err=-1
dma_fence_default_wait: lksleep err=-1
dma_fence_default_wait: lksleep err=-1
dma_fence_default_wait: lksleep err=-1
dma_fence_default_wait: lksleep err=-1
dma_fence_default_wait: lksleep err=-1
dma_fence_default_wait: lksleep err=-1
dma_fence_default_wait: lksleep err=-1
dma_fence_default_wait: lksleep err=-1
dma_fence_default_wait: lksleep err=-1
dma_fence_default_wait: lksleep err=-1
ugen1.2: <vendor 0x04e8> at usbus1
umodem0: <CDC Abstract Control Model ACM> on usbus1
umodem0: data interface 2, has no CM over data, has no break
[drm:generic_reg_wait] *ERROR* REG_WAIT timeout 1us * 10 tries - optc1_lock line:610
WARNING !(0) failed at /usr/src/sys/dev/drm/amd/amdgpu/../display/dc/dc_helper.c:293
ugen1.2: <vendor 0x04e8> at usbus1 (disconnected)
umodem0: at uhub1, port 3, addr 1 (disconnected)
umodem0: detached
ugen1.2: <SAMSUNG> at usbus1
umodem0: <CDC Abstract Control Model ACM> on usbus1
umodem0: data interface 2, has no CM over data, has no break
ugen1.2: <SAMSUNG> at usbus1 (disconnected)
umodem0: at uhub1, port 3, addr 1 (disconnected)
umodem0: detached
ugen1.2: <vendor 0x04e8> at usbus1
ugen1.2: <vendor 0x04e8> at usbus1 (disconnected)
ugen1.2: <vendor 0x04e8> at usbus1
umodem0: <vendor 0x04e8 product 0x6860, class 0/0, rev 2.00/4.00, addr 1> on usbus1
umodem0: data interface 2, has no CM over data, has no break
ugen1.2: <vendor 0x04e8> at usbus1 (disconnected)
umodem0: at uhub1, port 3, addr 1 (disconnected)
umodem0: detached
ugen1.2: <SAMSUNG> at usbus1
rtsock: received more addr bits than sockaddrs.
ugen1.2: <SAMSUNG> at usbus1 (disconnected)
ugen1.2: <SAMSUNG> at usbus1
umodem0: <CDC Abstract Control Model ACM> on usbus1
umodem0: data interface 2, has no CM over data, has no break
ugen1.2: <SAMSUNG> at usbus1 (disconnected)
umodem0: at uhub1, port 2, addr 1 (disconnected)
umodem0: detached
ugen1.2: <SAMSUNG> at usbus1
umodem0: <CDC Abstract Control Model ACM> on usbus1
umodem0: data interface 2, has no CM over data, has no break
ugen1.2: <SAMSUNG> at usbus1 (disconnected)
umodem0: at uhub1, port 2, addr 1 (disconnected)
umodem0: detached
ugen1.2: <SAMSUNG> at usbus1
urndis0: <RNDIS Communications Control> on usbus1
ue0: <USB Ethernet> on urndis0
ue0: MAC address: 02:2d:01:00:75:0f
ugen1.2: <SAMSUNG> at usbus1 (disconnected)
urndis0: at uhub1, port 2, addr 1 (disconnected)
urndis0: detached
ugen1.2: <SAMSUNG> at usbus1
urndis0: <RNDIS Communications Control> on usbus1
ue0: <USB Ethernet> on urndis0
ue0: MAC address: 02:2d:01:00:75:0f
urndis0: at uhub1, port 2, addr 1 (disconnected)
urndis0: detached
umodem0: <CDC Abstract Control Model ACM> on usbus1
umodem0: data interface 2, has no CM over data, has no break
ugen1.2: <SAMSUNG> at usbus1 (disconnected)
umodem0: at uhub1, port 2, addr 1 (disconnected)
umodem0: detached
ugen1.2: <SAMSUNG> at usbus1
umodem0: <CDC Abstract Control Model ACM> on usbus1
umodem0: data interface 2, has no CM over data, has no break