Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.2-RELEASE releng/13.2-n254617-525ecfdad597 GENERIC amd64
FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c)
VT(efifb): resolution 800x600
CPU: AMD Opteron(tm) X3216 APU                       (1597.09-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x660f01  Family=0x15  Model=0x60  Stepping=1
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD Features2=0x2febbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC,<b25>,DBE,PTSC,MWAITX>
  Structured Extended Features=0x1a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2>
  XSAVE Features=0x1<XSAVEOPT>
  AMD Extended Feature Extensions ID EBX=0x1000<IBPB>
  SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 7730368512 (7372 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20201113/tbfadt-796)
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 1
random: entropy device external interface
kbd0 at kbdmux0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
smbios0: <System Management BIOS> at iomem 0xdd972000-0xdd97201e
smbios0: Version: 3.0, BCD Revision: 3.0
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <ALASKA A M I >
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 450
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
apei0: <ACPI Platform Error Interface> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xe0000000-0xefffffff,0xf0000000-0xf07fffff,0xf0800000-0xf083ffff at device 1.0 on pci0
vgapci0: Boot video device
hdac0: <ATI Kabini HDA Controller> mem 0xfeb64000-0xfeb67fff at device 1.1 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 2.2 on pci0
pci1: <ACPI PCI bus> on pcib1
ahci0: <Marvell 88SE9230 AHCI SATA controller> port 0xe050-0xe057,0xe040-0xe043,0xe030-0xe037,0xe020-0xe023,0xe000-0xe01f mem 0xfea40000-0xfea407ff at device 0.0 on pci1
ahci0: AHCI v1.20 with 8 6Gbps ports, Port Multiplier not supported
ahci0: quirks=0x3000900<NOBSYRES,ALTSIG,IOMMU_BUSWIDE,SLOWDEV>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich6: <AHCI channel> at channel 6 on ahci0
ahcich7: <AHCI channel> at channel 7 on ahci0
pcib2: <ACPI PCI-PCI bridge> at device 2.5 on pci0
pcib2: failed to allocate initial prefetch window: 0xf0800000-0xf08fffff
pci2: <ACPI PCI bus> on pcib2
pci0:2:0:0: no valid vpd ident found
pci0:2:0:0: failed to read VPD data.
bge0: <Broadcom BCM5720 A0, ASIC rev. 0x5720000> mem 0xfe900000-0xfe90ffff,0xfe910000-0xfe91ffff,0xfe920000-0xfe92ffff at device 0.0 on pci2
bge0: APE FW version: NCSI v1.4.1.0
bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: 98:f2:b3:e8:71:1e
pci0:2:0:1: no valid vpd ident found
pci0:2:0:1: failed to read VPD data.
bge1: <Broadcom BCM5720 A0, ASIC rev. 0x5720000> mem 0xfe930000-0xfe93ffff,0xfe940000-0xfe94ffff,0xfe950000-0xfe95ffff at device 0.1 on pci2
bge1: APE FW version: NCSI v1.4.1.0
bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus1: <MII bus> on bge1
brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Using defaults for TSO: 65518/35/2048
bge1: Ethernet address: 98:f2:b3:e8:71:1f
pci0: <encrypt/decrypt> at device 8.0 (no driver attached)
xhci0: <AMD FCH USB 3.0 controller> mem 0xfeb68000-0xfeb69fff at device 16.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ahci1: <AMD KERNCZ AHCI SATA controller> port 0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f mem 0xfeb6d000-0xfeb6d3ff at device 17.0 on pci0
ahci1: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported with FBS
ahcich8: <AHCI channel> at channel 0 on ahci1
ehci0: <AMD FCH USB 2.0 controller> mem 0xfeb6c000-0xfeb6c0ff at device 18.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
uart2: <16x50 with 256 byte FIFO> iomem 0xfedc6000-0xfedc7fff irq 10 on acpi0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounter "TSC" frequency 1597002551 Hz quality 1000
Timecounters tick every 1.000 msec
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0
ugen0.1: <AMD XHCI root HUB> at usbus0
ugen1.1: <AMD EHCI root HUB> at usbus1
uhub0 on usbus0
uhub1 on usbus1
uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
Trying to mount root from cd9660:/dev/iso9660/13_2_RELEASE_AMD64_CD [ro]...
uhub0: 8 ports with 8 removable, self powered
ugen0.2: <vendor 0x046a product 0x0011> at usbus0
ukbd0 on uhub0
ukbd0: <vendor 0x046a product 0x0011, class 0/0, rev 2.00/1.00, addr 1> on usbus0
Root mount waiting for: CAM usbus0 usbus1
uhub1: 2 ports with 2 removable, self powered
kbd1 at ukbd0
ugen0.3: <vendor 0x090c USB DISK> at usbus0
umass0 on uhub0
umass0: <vendor 0x090c USB DISK, class 0/0, rev 2.00/11.00, addr 2> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x4000
umass0:9:0: Attached to scbus9
ugen1.2: <vendor 0x0438 product 0x7900> at usbus1
uhub2 on uhub1
uhub2: <vendor 0x0438 product 0x7900, class 9/0, rev 2.00/0.18, addr 2> on usbus1
uhub2: 4 ports with 4 removable, self powered
ada0 at ahcich2 bus 0 scbus2 target 0 lun 0
ada0: <ST4000NM0035-1V4107 TN02> ACS-3 ATA SATA 3.x device
ada0: Serial Number ZC12YQE9
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 3815447MB (7814037168 512 byte sectors)
ada1 at ahcich8 bus 0 scbus8 target 0 lun 0
ada1: <Crucial CT525MX300SSD1 M0CR031> ACS-3 ATA SATA 3.x device
ada1: Serial Number 1630135D8569
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 500786MB (1025610768 512 byte sectors)
pass1 at ahcich7 bus 0 scbus7 target 0 lun 0
pass1: <Marvell Console 1.01> Removable Processor SCSI device
pass1: Serial Number HKDP221516WL
pass1: 150.000MB/s transfers (SATA 1.x, UDMA4, ATAPI 12bytes, PIO 8192bytes)
da0 at umass-sim0 bus 0 scbus9 target 0 lun 0
da0: < USB DISK 1100> Removable Direct Access SPC-2 SCSI device
da0: 40.000MB/s transfers
da0: 7681MB (15730688 512 byte sectors)
da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
GEOM: da0: the secondary GPT header is not in the last LBA.
UFS1 superblock failed: fs->fs_old_cpg (89) != 1 (1)
UFS1 superblock failed: fs->fs_old_spc (4096) != fs->fs_fpg * fs->fs_old_nspf (364544)
UFS1 superblock failed: fs->fs_old_ncyl (1024) != fs->fs_ncg (12)
UFS1 superblock failed: fs->fs_maxbsize (0) < fs->fs_bsize (16384)
UFS1 superblock failed: fs->fs_old_cpg (89) != 1 (1)
UFS1 superblock failed: fs->fs_old_spc (4096) != fs->fs_fpg * fs->fs_old_nspf (364544)
UFS1 superblock failed: fs->fs_old_ncyl (1024) != fs->fs_ncg (12)
UFS1 superblock failed: fs->fs_maxbsize (0) < fs->fs_bsize (16384)
GEOM: iso9660/13_2_RELEASE_AMD64_CD: the secondary GPT header is not in the last LBA.
UFS1 superblock failed: fs->fs_old_cpg (89) != 1 (1)
UFS1 superblock failed: fs->fs_old_spc (4096) != fs->fs_fpg * fs->fs_old_nspf (364544)
UFS1 superblock failed: fs->fs_old_ncyl (1024) != fs->fs_ncg (12)
UFS1 superblock failed: fs->fs_maxbsize (0) < fs->fs_bsize (16384)
UFS1 superblock failed: fs->fs_old_cpg (89) != 1 (1)
UFS1 superblock failed: fs->fs_old_spc (4096) != fs->fs_fpg * fs->fs_old_nspf (364544)
UFS1 superblock failed: fs->fs_old_ncyl (1024) != fs->fs_ncg (12)
UFS1 superblock failed: fs->fs_maxbsize (0) < fs->fs_bsize (16384)
Dual Console: Video Primary, Serial Secondary
random: unblocking device.
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
driver bug: Unable to set devclass (class: ppc devname: (unknown))
ig4iic0: <Designware I2C Controller> iomem 0xfedc2000-0xfedc2fff irq 3 on acpi0
iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0
ig4iic1: <Designware I2C Controller> iomem 0xfedc3000-0xfedc3fff irq 15 on acpi0
iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1
lo0: link state changed to UP
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
bge0: link state changed to DOWN
bge0: link state changed to UP