Copyright (c) 2003-2022 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly v6.4.0.26.g43e53c-RELEASE #0: Tue Apr 25 22:42:34 CST 2023
    aly@microserver.liwt.net:/usr/obj/usr/src/sys/X86_64_GENERIC
acpi_hpet: frequency 14318180
Using cputimer HPET for TSC calibration
Timer latency (in TSC ticks): 1448 min=1434 max=1512
TSC invariant clock: 1597003316 Hz
CPU: AMD Opteron(tm) X3216 APU                       (1597.00-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x660f01  Stepping = 1
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x76d8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,AVX,F16C,RDRND>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD Features2=0x2fabbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,PCX_CORE,PCX_NB,SPM,DBE,PTSC,MWAITX>
  Structured Extended Features=0x1a9<GSFSBASE,BMI1,AVX2,SMEP,BMI2>
  Thermal and PM Features=0x4<ARAT>
  MONITOR/MWAIT Features=0x2<INTBRK>
CPU Special Features Installed: SMEP
real memory  = 8014073856 (7642 MB)
avail memory = 7708643328 (7351 MB)
madt_lapic_probe: lapic_count=2 x2apic_count=0
ACPI CPUS = 2
LAPIC: AMD LINTEN on
   LAPIC AMD elvt0: 0x00010000
   LAPIC AMD elvt1: 0x00010000
   LAPIC AMD elvt2: 0x00010000
   LAPIC AMD elvt3: 0x00010000
LAPIC latency (in TSC ticks): 435 min: 431 max: 494
lapic: divisor index 0, frequency 49906351 Hz
core_bits 4 logical_CPU_bits 0
CPU Topology: cores_per_chip: 2; threads_per_core: 1; chips_per_package: 1;
srat_probe: can't locate SRAT
Initialize MI interrupts for 2 cpus
TSC testing MP synchronization ...
TSC testing MP: NOTE! CPU pwrsave will inflate latencies!
TSC cpu-delta test complete, 6407nS to 11902nS SUCCESS
TSC cpu-delta test complete, 4925nS to 5098nS SUCCESS
TSC cpu-delta test complete, 4847nS to 5301nS SUCCESS
TSC cpu-delta test complete, 5002nS to 5028nS SUCCESS
TSC cpu concurrency test complete, worst=103ns, avg=51ns SUCCESS
TSC is MP synchronized
TSC: cputimer freq 1597003316
Spectre: support=( IBPB ) req=0000 operating=( none )
MDS: support=( MDS_NOT_REQUIRED ) req=0000 operating=( none )
interrupt uses mplock: swi_taskq
wdog: In-kernel automatic watchdog reset enabled
md0: Malloc disk
evdev device loaded.
kbd0 at kbdmux0
ACPI: RSDP 0x00000000DD6E1000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DD6E10A8 0000D4 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x00000000DD6E8E28 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20211217/tbfadt-801)
ACPI: DSDT 0x00000000DD6E1218 007C09 (v02 ALASKA A M I    01072009 INTL 20120913)
ACPI: FACS 0x00000000DD721F00 000040
ACPI: APIC 0x00000000DD6E8F38 00007E (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x00000000DD6E8FB8 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FIDT 0x00000000DD6E9000 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: MCFG 0x00000000DD6E90A0 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
ACPI: HPET 0x00000000DD6E90E0 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
ACPI: ASF! 0x00000000DD6E9118 0000D6 (v32 AMD    SB700ASF 00000001 TFSM 000F4240)
ACPI: UEFI 0x00000000DD6E91F0 000042 (v01                 00000000      00000000)
ACPI: IVRS 0x00000000DD6E9238 0000D0 (v02 AMD    AGESA    00000001 AMD  00000000)
ACPI: VFCT 0x00000000DD6E9308 00FC84 (v01 ALASKA A M I    00000001 AMD  31504F47)
ACPI: BGRT 0x00000000DD6F8F90 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: SSDT 0x00000000DD6F8FC8 00043C (v01 AMD    AGESA    00000001 AMD  00000001)
ACPI: SSDT 0x00000000DD6F9408 00888F (v02 AMD    AGESA    00000002 MSFT 04000000)
ACPI: CRAT 0x00000000DD701C98 0002E8 (v01 AMD    AGESA    00000001 AMD  00000001)
ACPI: SSDT 0x00000000DD701F80 001492 (v01 AMD    CPMDFIGP 00000001 INTL 20120913)
ACPI: SSDT 0x00000000DD703418 00165E (v01 AMD    CPMCMN   00000001 INTL 20120913)
ACPI: HEST 0x00000000DD704A78 0000EC (v01 AMD    AMD HEST 00000000      00000000)
ACPI: BERT 0x00000000DD704B68 000030 (v01 AMD    AMD BERT 00000000      00000000)
ACPI: EINJ 0x00000000DD704B98 000130 (v01 AMI    AMI.EINJ 00000000 AMI. 00000000)
ACPI: ERST 0x00000000DD704CC8 000230 (v01 AMIER  AMI.ERST 00000000 AMI. 00000000)
ACPI: BERT 0x00000000DD704EF8 000030 (v01 AMI    AMI.BERT 00000000 AMI. 00000000)
ACPI: HEST 0x00000000DD704F28 0000A8 (v01 AMI    AMI.HEST 00000000 AMI. 00000000)
sc0: <System console> on motherboard
sc0: EFI_FB <16 virtual consoles, flags=0x700>
cryptosoft0: <software crypto> on motherboard
acpi0: <ALASKA A M I > on motherboard
ACPI: 5 ACPI AML tables successfully acquired and loaded
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI select level/low
acpi0: Power Button (fixed)
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_timer0 on acpi0
cpu0: <ACPI CPU> on acpi0
cpu_cst0: <ACPI CPU C-State> on cpu0
cpu_pst0: <ACPI CPU P-State> on cpu0
cpu1: <ACPI CPU> on acpi0
cpu_cst1: <ACPI CPU C-State> on cpu1
cpu_pst1: <ACPI CPU P-State> on cpu1
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
amdsmn0: <AMD Family 15h System Management Network> on hostb0
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb0
pci0: <base peripheral> (vendor 0x1022, dev 0x1577) at device 0.2
vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xfeb00000-0xfeb3ffff,0xf0000000-0xf07fffff,0xe0000000-0xefffffff at device 1.0 on pci0
vgapci0: Boot video device
pcib1: <ACPI PCI-PCI bridge> at device 2.2 on pci0
pci1: <ACPI PCI bus> on pcib1
ahci0: <AHCI-PCI-SATA> port 0xe000-0xe01f,0xe020-0xe023,0xe030-0xe037,0xe040-0xe043,0xe050-0xe057 mem 0xfea40000-0xfea407ff at device 0.0 on pci1
ahci0: Enable 88SE9230 workarounds for broken chip
ahci0: AE did not auto-clear!
ahci0: AHCI 1.2 cap 0xc0309f07<S64A,NCQ,PMD>, 8 ports, 32 tags/port, gen 3 (6Gbps)
ahci0.0: Found DISK "WDC WD40PURX-78AKYY0 80.00B80" serial="WD-WX12D61KK55Z"
ahci0.0: tags=32/32 satacap=9f0e satacap2=0006 satafea=004c NCQ=YES capacity=3815447.83MB
ahci0.0: f85=7069 f86=bc01 f87=6123 WC=enabled RA=enabled SEC=freezing
ahci0.1: Found DISK "ST4000NM0035-1V4107 TN02" serial="ZC12YQE9"
ahci0.1: tags=32/32 satacap=8d0e satacap2=0046 satafea=08cc NCQ=YES capacity=3815447.83MB
ahci0.1: f85=3069 f86=b441 f87=6173 WC=enabled RA=enabled SEC=freezing
ahci0.3: No device detected
ahci0.5: No device detected
ahci0.7: Found ATAPI "MARVELL VIRTUAL 1.09" serial="HKDP221516WL"
ahci0.7: tags=0/32 satacap=0602 satacap2=0000 satafea=0040 NCQ=NO capacity=1.00MB
ahci0.7: f85=0218 f86=0000 f87=4000 WC=notsupp RA=notsupp SEC=notsupp
pcib2: <ACPI PCI-PCI bridge> at device 2.4 on pci0
pci2: <ACPI PCI bus> on pcib2
igb0: <Intel(R) PRO/1000 I350_COPPER> mem 0xfe804000-0xfe807fff,0xfe700000-0xfe7fffff at device 0.0 on pci2
igb0: MAC address: a0:36:9f:88:a9:9c
igb1: <Intel(R) PRO/1000 I350_COPPER> mem 0xfe800000-0xfe803fff,0xfe600000-0xfe6fffff at device 0.1 on pci2
igb1: MAC address: a0:36:9f:88:a9:9d
pcib3: <ACPI PCI-PCI bridge> at device 2.5 on pci0
pci3: <ACPI PCI bus> on pcib3
bnx0: <Broadcom BCM5720 Gigabit Ethernet> mem 0xf0830000-0xf083ffff,0xf0840000-0xf084ffff,0xf0850000-0xf085ffff at device 0.0 on pci3
bnx0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200
bnx0: APE FW version: NCSI v1.4.1.0
miibus0: <MII bus> on bnx0
brgphy0: <BCM5720C 10/100/1000baseT PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bnx0: MAC address: 98:f2:b3:e8:71:1e
bnx1: <Broadcom BCM5720 Gigabit Ethernet> mem 0xf0800000-0xf080ffff,0xf0810000-0xf081ffff,0xf0820000-0xf082ffff at device 0.1 on pci3
bnx1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200
bnx1: APE FW version: NCSI v1.4.1.0
miibus1: <MII bus> on bnx1
brgphy1: <BCM5720C 10/100/1000baseT PHY> on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bnx1: MAC address: 98:f2:b3:e8:71:1f
pci0: <encrypt/decrypt> (vendor 0x1022, dev 0x1578) at device 8.0
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfeb64000-0xfeb65fff at device 16.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ahci1: <AHCI-PCI-SATA> port 0xf100-0xf10f,0xf110-0xf113,0xf120-0xf127,0xf130-0xf133,0xf140-0xf147 mem 0xfeb69000-0xfeb693ff at device 17.0 on pci0
ugen0.1: <0x1022> at usbus0
uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ahci1: AE did not auto-clear!
uhub0: 8 ports with 8 removable, self powered
ahci1: AHCI 1.3 cap 0xf733ff00<S64A,NCQ,SSNTF,SMPS,SALP,SAL,SCLO,SPM,FBSS,PMD,SSC,PSC> cap2 0x0, 1 ports, 32 tags/port, gen 3 (6Gbps)
ahci1.0: FBS Cap detected: HW indicates support, enable succeeded
ahci1.0: PMPROBE(2) No Port Multiplier was found.
ahci1.0: FBS Cap detected: HW indicates support, enable succeeded
ahci1.0: PMPROBE(2) No Port Multiplier was found.
ahci1.0: Found SSD "Crucial_CT525MX300SSD1 M0CR031" serial="1630135D8569"
ahci1.0: tags=32/32 satacap=950e satacap2=00c6 satafea=014c NCQ=YES capacity=500786.50MB
ahci1.0: f85=7069 f86=b409 f87=6163 WC=enabled RA=enabled SEC=frozen
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfeb68000-0xfeb680ff at device 18.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
pci0: <serial bus, SMBus> (vendor 0x1022, dev 0x790b) at device 20.0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
ugen1.1: <AMD> at usbus1
uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ACPI: Enabled 1 GPEs in block 00 to 1F
aesni0: <AES-CBC,AES-XTS> on motherboard
padlock0: No ACE support.
rdrand0: <RdRand RNG> on motherboard
uhub1: 2 ports with 2 removable, self powered
sio0: can't drain, serial port might not exist, disabling
sio1: can't drain, serial port might not exist, disabling
hpt27xx: no controller detected.
CAM: Configuring 9 busses
CAM: finished configuring all busses
da0 at ahci0 bus 0 target 0 lun 0
da0: <SATA WDC WD40PURX-78A 80.0> Fixed Direct Access SCSI-4 device 
da0: Serial Number WD-WX12D61KK55Z
da0: 600.000MB/s transfers
da0: 3815447MB (7814037168 512 byte sectors: 255H 63S/T 486401C)
da1 at ahci0 bus 1 target 0 lun 0
da1: <SATA ST4000NM0035-1V4 TN02> Fixed Direct Access SCSI-4 device 
da1: Serial Number ZC12YQE9
da1: 600.000MB/s transfers
da1: 3815447MB (7814037168 512 byte sectors: 255H 63S/T 486401C)
da2 at ahci1 bus 0 target 0 lun 0
da2: <SATA Crucial_CT525MX3 M0C> Fixed Direct Access SCSI-4 device 
da2: Serial Number 1630135D8569
da2: 600.000MB/s transfers
da2: 500786MB (1025610768 512 byte sectors: 255H 63S/T 63841C)
da2: supports TRIM
ugen1.2: <vendor 0x0438> at usbus1
uhub2: <vendor 0x0438 product 0x7900, class 9/0, rev 2.00/0.18, addr 2> on usbus1
uhub2: 4 ports with 4 removable, self powered
Mounting root from hammer2:/dev/serno/1630135D8569.s3@ROOT
hammer2_mount: root devstr="/dev/serno/1630135D8569.s3@ROOT"
hammer2_mount: device="/dev/serno/1630135D8569.s3" label="ROOT" rdonly=1
hammer2_ondisk: "/dev/serno/1630135D8569.s3" zone=0 id=0 offset=0x0000000000000000 size=0x00000075bb000000
hammer2_mount: hmp=0xfffff800cd7c0000 pmp=0xfffff800c4ab3600
DMA space used: 10900k, remaining available: 131072k
Mounting devfs
hammer2_mount: "/dev/serno/1630135D8569.s3": no recovery needed
hammer2: enable read/write
reconnect to cluster: nc=1 focus=0
not a local device mount
hammer2_mount: devstr="/dev/serno/1630135D8569.s3@HOME"
hammer2_mount: device="/dev/serno/1630135D8569.s3" label="HOME" rdonly=0
hammer2_mount: hmp=0xfffff800cd7c0000 matched
hammer2_mount: hmp=0xfffff800cd7c0000 pmp=0xfffff800c4ab4c00
hammer2_mount: devstr="/dev/serno/1630135D8569.s3@BUILD"
hammer2_mount: device="/dev/serno/1630135D8569.s3" label="BUILD" rdonly=0
hammer2_mount: hmp=0xfffff800cd7c0000 matched
hammer2_mount: hmp=0xfffff800cd7c0000 pmp=0xfffff800c4ab2000
hammer2_mount: devstr="/dev/serno/WD-WX12D61KK55Z.s0@DATA"
hammer2_mount: device="/dev/serno/WD-WX12D61KK55Z.s0" label="DATA" rdonly=0
hammer2_ondisk: "/dev/serno/WD-WX12D61KK55Z.s0" zone=0 id=0 offset=0x0000000000000000 size=0x000003a381000000
hammer2_mount: "/dev/serno/WD-WX12D61KK55Z.s0": no recovery needed
hammer2_mount: hmp=0xfffff801c9c80000 pmp=0xfffff800c4ab8e00
hammer2_mount: devstr="/dev/serno/ZC12YQE9.s0@DATA"
hammer2_mount: device="/dev/serno/ZC12YQE9.s0" label="DATA" rdonly=0
hammer2_ondisk: "/dev/serno/ZC12YQE9.s0" zone=1 id=0 offset=0x0000000000000000 size=0x000003a381000000
hammer2_mount: "/dev/serno/ZC12YQE9.s0": no recovery needed
hammer2_mount: hmp=0xfffff801ca7dc000 pmp=0xfffff800c4abd000
swap low/high-water marks set to 167769/251654