Re: Intel Corporation 82578DC Gigabit NIC support

[Chris Turner <c.turner@xxxxxxxxxxxxxxxxxxx>]

On Tue, May 31, 2011 at 12:52:15PM +0800, Sepherosa Ziehau wrote:
>
> You probably need to change dev/netif/igb instead of em and ig_hal.
> You could simply add the PCI ids to igb and see whether it works or
> not.
>

The plot thickens - 

based on a whole lot of suppositions, b/c it would take hours
to review the history and someone here probably knows it better
anyhow - 

It looks something like em driver (perhaps btw v6-7 of the intel rev?) 
grew into the e1000 driver, with pcie support - and a 'legacy' em(4)
driver - subsequent updates? were made to the e1000/*em* items,
such as adding more chips - 

Our e1000/em contains what apppears to be the needed items for this card:

em0@pci0:0:25:0:        class=0x020000 card=0x80001025 chip=0x10f08086
rev=0x06 hdr=0x00 

e1000_api.c:    case E1000_DEV_ID_PCH_D_HV_DC:
e1000_hw.h:#define E1000_DEV_ID_PCH_D_HV_DC              0x10F0
if_em.c:        { 0x8086, E1000_DEV_ID_PCH_D_HV_DC,     PCI_ANY_ID, PCI_ANY_ID,
0},

(the 0x10F0 being the relavent bits)

which are not in the 'live' sys/dev/netif/em driver -

however, this copy of 'em' (sys/dev/netif/e1000/em) is not linked 
into the build - whereas the sys/dev/netif/em copy is.

I was able to :

cd sys/dev/netif/e1000/em && wmake

to get a clean 'if_em.ko' - no idea if this will probe/attach/send packets
and so on.. 

So - Siju - feel free to build that and test I suppose -

not sure where to take it from here w/r/t 'em' development - either
to disable / merge in the relavent bits of sys/dev/netif/em to e1000/em,
or the other way around, etc..

my thoughts would be to use the new copy - however it does appear
that someone at some point took the time to cleanly separate the phy
stuff, into that 'ig_hal' etc- so maybe this was overlooked when e1000 
was added, I dunno.. (see history, above :D )

so - I will defer to the experts 

cheers

- Chris