DragonFly cannot detect existing FreeBSD partitions during install and cannot detect SanDisk USB flash drive during install

["Archimedes Gaviola" <archimedes.gaviola@xxxxxxxxx>]

Hi,

I have a notebook PC with existing FreeBSD disk partitions of 6.2 and
5.5 releases and then to install DragonFly 2.0 for multiple OS
booting. Before I begin installing DragonFly, I already created a
slice for it using FreeBSD-6.2 installer and I assume the same slice
type of 165 that DragonFly is using but somehow it failed to detect
existing FreeBSD partitions.  So, what I did next is to try installing
DragonFly on my 1GB SanDisk USB flash drive but somehow it failed to
detect the device during installation. Although I know this USB
drive's driver is supported by DragonFly as I've have tried plugging
it on another PC with DragonFly.

da0 at umass-sim0 bus 0 target 0 lun 0
da0: <SanDisk U3 Cruzer Micro 3.21> Removable Direct Access SCSI-2 device
da0: Serial Number \^_
da0: 1.000MB/s transfers
da0: 973MB (1994385 512 byte sectors: 64H 32S/T 973C)

Thanks,
Archimedes