ral(4) PCMCIA / cbb problem

["Ja'far Railton" <ibn.richard@xxxxxxxxx>]

Hello (again)

Having scrapped my dodgy D-Link ath(4) based card, I am now trying an
MSI CardBus CB54G2 card. 

It attaches but 'dmesg | grep ral' says:

Preloaded elf module "/modules/if_ral.ko" at 0xc050245c.
ral0: <Ralink Technology RT2560> mem 0x88002000-0x88003fff irq 11 at device 0.0 on cardbus0
ral0: MAC/BBP RT2560 (rev 0xffffffff), RF unknown
ral0: MAC address: ff:ff:ff:ff:ff:ff
ral0: could not read from BBP
<snip>
ral0: could not read from BBP
ral0: timeout waiting for BBP

I saw a post in the archives with a similar problem but a cbb patch
fixed it. I am running 1.9.0-PREVIEW and have applied the latest cbb
patch (cbb_020407.diff) but it makes no difference.

If it's any help, 'vmstat -i' (after patching) gives:

interrupt                   total       rate
clk                         24149        225
atkbd0                        211          1
ohci0                           0          0
pcm0/fxp0/cbb0                  1          0
psm0                         2715         25
ata0                         2447         22
ata1                           33          0
irq19                          49          0
swi_crypto/swi_camnet           0          0
swi_cambio                      0          0
swi_vm                          0          0
swi_taskq                       0          0
Total                       29605        276

FWIW, NetBSD 4.99.xx - on the same disk - gives the card a valid MAC address.

TIA for any help.

  -jr

DragonFly think.makhraj.net 1.9.0-PREVIEW DragonFly 1.9.0-PREVIEW #0: Sun Feb 11 08:08:03 AST 2007     root@think.makhraj.net:/usr/obj/usr/src/sys/MYKERNEL  i386