[SOLVED] Re: Can't boot from another slice (long)

[Francis Gudin <fgudin@xxxxxxxxx>]

Francis Gudin wrote:
> Hello,
> 
> I'm trying to follow the steps described in article "FreeBSD From
> Scratch". All went ok until rebooting: it just hangs.
> The details:
> 
> My fdisk output:
> 
>>sudo fdisk ad0
> 
> ******* Working on device /dev/ad0 *******
> parameters extracted from in-core disklabel are:
> cylinders=4864 heads=255 sectors/track=63 (16065 blks/cyl)
> 
> Figures below won't work with BIOS for partitions not in cyl 1
> parameters to be used for BIOS calculations are:
> cylinders=4864 heads=255 sectors/track=63 (16065 blks/cyl)
> 
> Media sector size is 512
> Warning: BIOS sector numbering starts with sector 1
> Information from DOS bootblock is:
> The data for partition 1 is:
> sysid 7,(OS/2 HPFS, NTFS, QNX-2 (16 bit) or Advanced UNIX)
>     start 63, size 3984057 (1945 Meg), flag 0
>         beg: cyl 0/ head 1/ sector 1;
>         end: cyl 247/ head 254/ sector 63
> The data for partition 2 is:
> sysid 165,(DragonFly/FreeBSD/NetBSD/386BSD)
>     start 3984120, size 3984120 (1945 Meg), flag 80 (active)
>         beg: cyl 248/ head 0/ sector 1;
>         end: cyl 495/ head 254/ sector 63
> The data for partition 3 is:
> sysid 165,(DragonFly/FreeBSD/NetBSD/386BSD)
>     start 7968240, size 3984120 (1945 Meg), flag 0
>         beg: cyl 496/ head 0/ sector 1;
>         end: cyl 743/ head 254/ sector 63
> The data for partition 4 is:
> sysid 165,(DragonFly/FreeBSD/NetBSD/386BSD)
>     start 11952360, size 66187800 (32318 Meg), flag 0
>         beg: cyl 744/ head 0/ sector 1;
>         end: cyl 1023/ head 254/ sector 63
> 
> Slice n°3 is the next-system wanabee: i installed a 1_2_Slip'ed from
> yesterday onto it and from the active slice, everything seems well:
> 
> 
>>sudo disklabel ad0s3
> 
> # /dev/ad0s3c:
> type: unknown
> disk: amnesiac
> label:
> flags:
> bytes/sector: 512
> sectors/track: 63
> tracks/cylinder: 255
> sectors/cylinder: 16065
> cylinders: 248
> sectors/unit: 3984120
> rpm: 3600
> interleave: 1
> trackskew: 0
> cylinderskew: 0
> headswitch: 0           # milliseconds
> track-to-track seek: 0  # milliseconds
> drivedata: 0
> 
> 16 partitions:
> #        size   offset    fstype   [fsize bsize bps/cpg]
>   a:   512000        0    4.2BSD     1024  8192    22   # (Cyl.    0 - 31*)
>   b:   512000   512000    4.2BSD     2048 16384    94   # (Cyl.   31*- 63*)
>   c:  3984120        0    unused        0     0         # (Cyl.    0 - 247)
>   d:  2960120  1024000    4.2BSD     1024  8192    22   # (Cyl.   63*- 247*)
> 
> In fact, except for the comment line, it's ad0s2' twin :-)
> Also, all needed files are there to my understanding:
> 
>>mount
> 
> /dev/ad0s2a on / (ufs, local)
> /dev/ad0s2b on /var (ufs, local)
> /dev/ad0s2d on /usr (ufs, local, soft-updates)
> /dev/ad0s4b on /tmp (ufs, local)
> /dev/ad0s4d on /usr/home (ufs, local)
> procfs on /proc (procfs, local)
> /dev/ad0s3a on /newroot (ufs, local, soft-updates)
> /dev/ad0s3b on /newroot/var (ufs, local, soft-updates)
> /dev/ad0s3d on /newroot/usr (ufs, local, soft-updates)
> 
>>ls /newroot/
> 
> COPYRIGHT       dev             modules         slice_3         usr
> bin             etc             proc            src             var
> boot            kernel          root            sys
> compat          mnt             sbin            tmp
> 
>>ls /newroot/boot/
> 
> beastie.4th     boot2           loader          mbr
> boot            cdboot          loader.4th      pxeboot
> boot0           defaults        loader.help     screen.4th
> boot1           frames.4th      loader.rc       support.4th
> 
> Now, the behaviour: at the "boot0" slice selection menu, pressing F3
> just hangs (well i'm still able to 3-fingers salute it). I played a bit
> with boot0 but can't quite understand the naming scheme and what's
> expected from there...
> Maybe more informational is the attempt to boot on F2, as usual, and
> break at the loader prompt: after "set currdev=disk1s3a:", "ls" itself
> hangs :-/ I wonder my slice is properly prepared ?
> I'm thinking also about trying to put a more recent boot0 in place, but
> as i feel it a bit adventurous rewriting my MBR, i"d like to ask you
> about it:
> would "sudo /newroot/usr/sbin/boot0cfg -B -b /newroot/boot/boot0" help
> and run correctly ?
> 
> Thanks in advance for any hints,
> 
> Francis.

OK, h'm a dumb ass... for the memories though:
don't ever confuse the "-O" flag of DFly's newfs and the "-O" option of
FBSD's... It seems as boot0 can't deal with FS created with the former,
even if the manpage states that it could help with "old boot ROMs".

Have a nice day,
Francis
(now playing with pkgsrc :-) )