ICP Vortex GDT8524RZ+BBU

[Heinrich Rebehn <rebehn@xxxxxxxxxxxxxxxxx>]

Hi all,

has anybody had success with Dragonfly and a ICP Vortex GDT8524RZ+BBU 
SCSI-RAID Controller? It works fine under FreeBSD-5.3, but under 
Dragonfly, any attempt to access the disk (fdisk or dd) hangs the process:

 829  p1- DL     0:00.00 fdisk da0

I am attaching dmesg output.

Any ideas?

Copyright (c) 2003, 2004, 2005 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly 1.1-CURRENT #0: Thu Jan 20 01:20:06 GMT 2005
    root@xxxxxxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/GENERIC
TSC clock: 3000157335 Hz, i8254 clock: 1193202 Hz
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (3000.12-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf34  Stepping = 4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  = 2147418112 (2097088K bytes)
avail memory = 2079133696 (2030404K bytes)
Preloaded elf kernel "/kernel" at 0xc066c000.
Preloaded elf module "/modules/acpi.ko" at 0xc066c1e8.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 14 entries at 0xc00fde60
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
acpi0: <IntelR AWRDACPI> on motherboard
installed MI handler for int 9
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=8086 device=257b)> at device 3.0 on pci0
pci1: <PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0x9000-0x901f mem 0xe4000000-0xe401ffff,0xe4020000-0xe403ffff irq 12 at device 1.0 on pci1
em0: MAC address: 00:e0:81:63:71:85
em0: Speed: N/A, Duplex:N/A
installed MI handler for int 12
pcib2: <PCI to PCI bridge (vendor=8086 device=25ae)> at device 28.0 on pci0
pci2: <PCI bus> on pcib2
iir0: <ICP Disk Array Controller> mem 0xe6000000-0xe6003fff irq 9 at device 3.0 on pci2
uhci0: <UHCI (generic) USB controller> port 0xc400-0xc41f irq 5 at device 29.0 on pci0
installed MI handler for int 5
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xc000-0xc01f irq 12 at device 29.1 on pci0
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x8086, dev=0x25ab) at 29.4
pci0: <unknown card> (vendor=0x8086, dev=0x25ac) at 29.5
pci0: <USB controller> at 29.7 irq 9
pcib3: <Intel 82801BA/CA/DB/EB/FB (ICH2/3/4/5/6) Hub to PCI bridge> at device 30.0 on pci0
pci3: <PCI bus> on pcib3
pci3: <ATI Mach64-GR graphics accelerator> at 1.0 irq 5
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0xa400-0xa43f mem 0xe2000000-0xe201ffff,0xe2020000-0xe203ffff irq 12 at device 2.0 on pci3
em1: MAC address: 00:e0:81:63:71:86
em1: Speed: N/A, Duplex:N/A
atapci0: <SiI 3114 SATA controller> port 0xb800-0xb80f,0xb400-0xb403,0xb000-0xb007,0xac00-0xac03,0xa800-0xa807 mem 0xe2040000-0xe20403ff irq 9 at device 3.0 on pci3
ata2: at 0xa800 on atapci0
ata3: at 0xb000 on atapci0
isab0: <PCI to ISA bridge (vendor=8086 device=25a1)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Generic PCI ATA controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.2 on pci0
ata0: at 0x1f0 irq 14 on atapci1
installed MI handler for int 14
ata1: at 0x170 irq 15 on atapci1
installed MI handler for int 15
pci0: <unknown card> (vendor=0x8086, dev=0x25a4) at 31.3 irq 12
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
installed MI handler for int 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
installed MI handler for int 1
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
installed MI handler for int 4
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
installed MI handler for int 3
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
installed MI handler for int 7
installed MI handler for int 0
ad0: DMA limited to UDMA33, non-ATA66 cable or device
ad0: 78167MB <Maxtor 6Y080M0> [158816/16/63] at ata0-master WDMA2
ad1: DMA limited to UDMA33, non-ATA66 cable or device
ad1: hard error reading fsbn 160086465 of 0-3 (ad1 bn 160086465; cn 158815 tn 15 sn 0) trying PIO mode
ad1: hard error reading fsbn 160086465 of 0-3 (ad1 bn 160086465; cn 158815 tn 15 sn 0) status=59 error=04
ad1: 78167MB <Maxtor 6Y080M0> [158816/16/63] at ata0-slave PIO4
acd0: DVD-ROM <SONY DVD-ROM DDU1613> at ata1-master PIO4
Waiting 15 seconds for SCSI devices to settle
iir0: BBU status: Normal
iir0: BBU temperature: Normal (30 deg Celsius)
iir0: BBU capacity: Normal (99 % of nominal capacity)
iir0: BBU fully charged. Charge level: 1774 mAh
iir0: Write Cache enabled by BBU. BBU operable
da0 at iir0 bus 2 target 0 lun 0
da0: <IIR Host Drive   #00 > Fixed Direct Access SCSI-2 device 
da0: Tagged Queueing Enabled
da0: 858198MB (1757591325 512 byte sectors: 255H 63S/T 43869C)
Mounting root from ufs:/dev/ad0s2a
cd0 at ata1 bus 0 target 0 lun 0
cd0: <SONY DVD-ROM DDU1613 9YS2> Removable CD-ROM SCSI-0 device 
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
em0: Link is up 1000 Mbps Full Duplex
em0: Link is up 1000 Mbps Full Duplex
ad1: READ command timeout tag=0 serv=0 - resetting
ata0: resetting devices .. ad0: DMA limited to UDMA33, non-ATA66 cable or device
done
ad1: hard error reading fsbn 0 (ad1 bn 0; cn 0 tn 0 sn 0) status=59 error=04
ad1: reading primary partition table: error reading fsbn 0