DragonFly users List (threaded) for 2004-10
[
Date Prev][
Date Next]
[
Thread Prev][
Thread Next]
[
Date Index][
Thread Index]
Re: vmstat -i shows strange interrupts
Matthew Dillon wrote:
:
:Hi there, got it installed :-)
:
:...
:-- vmstat --
:beast# vmstat -i
:interrupt total rate
:??? 0 0
:stray irq0 0 0
:stray irq1 0 0
:stray irq2 0 0
:stray irq3 0 0
:stray irq4 0 0
:stray irq5 0 0
:...
:mux irq11 42624 13
:atkbd0 irq1 3361 1
:psm0 irq12 0 0
:sio0 irq4 0 0
:sio1 irq3 0 0
:ppc0 irq7 0 0
:clk irq0 698586 226
:Total 814148 263
:--
:
:What's with all the strange stray's? Is this normal? It doesn't seem to
Yes, it's normal. Notice all the counts are 0 ? The stray interrupts
are placeholders for unassigned and alternative irq vectors. This is
especially true for systems with APICs because we use a different vector
number for SLOW vs FAST interrupts on the same irq.
Nothing to worry about then :)
:be affecting much but then it doesn't look quite right either. Where's
:my fxp0 card too! Is this perhaps an ACPI issue? All I can think of
The fxp0 card is in the 'mux' slot for irq 11, along with other cards
sharing that interrupt. vmstat -I is simply not traversing the MUX list
or the sysctl isn't generating it, or something like that.
I figured maybe it was the mux one a minute ago. Don't actually know
what mux is, but I had a look at my dmesg and saw my fxp card was using
IRQ 11.
-Matt
Matthew Dillon
<dillon@xxxxxxxxxxxxx>
--
Internet Explorer? Try FireFox at http://www.mozilla.org/products/firefox/
Outlook Express? Try ThunderBird at
http://www.mozilla.org/products/thunderbird/
[
Date Prev][
Date Next]
[
Thread Prev][
Thread Next]
[
Date Index][
Thread Index]