DragonFly submit List (threaded) for 2005-04
[
Date Prev][
Date Next]
[
Thread Prev][
Thread Next]
[
Date Index][
Thread Index]
TIMER selection via tunable
Hi all,
the attached patch implements the timer selection as tunable and
removes the TIMER_USE_1 option.
I intend to commit this tomorrow.
Joerg
Index: conf/options.i386
===================================================================
RCS file: /home/joerg/wd/repository/dragonflybsd/src/sys/conf/options.i386,v
retrieving revision 1.10
diff -u -r1.10 options.i386
--- conf/options.i386 28 Mar 2005 14:42:44 -0000 1.10
+++ conf/options.i386 28 Mar 2005 22:22:40 -0000
@@ -39,7 +39,6 @@
CLK_USE_I8254_CALIBRATION opt_clock.h
CLK_USE_TSC_CALIBRATION opt_clock.h
TIMER_FREQ opt_clock.h
-TIMER_USE_1 opt_clock.h
KERN_TIMESTAMP opt_global.h
NO_F00F_HACK opt_cpu.h
Index: i386/isa/clock.c
===================================================================
RCS file: /home/joerg/wd/repository/dragonflybsd/src/sys/i386/isa/clock.c,v
retrieving revision 1.21
diff -u -r1.21 clock.c
--- i386/isa/clock.c 27 Mar 2005 19:25:07 -0000 1.21
+++ i386/isa/clock.c 29 Mar 2005 00:04:42 -0000
@@ -116,13 +116,10 @@
#define TIMER_FREQ 1193182
#endif
-#ifdef TIMER_USE_1
-#define TIMER_SELX TIMER_SEL1
-#define TIMER_CNTRX TIMER_CNTR1
-#else
-#define TIMER_SELX TIMER_SEL2
-#define TIMER_CNTRX TIMER_CNTR2
-#endif
+int i8254_walltimer;
+TUNABLE_INT("hw.i8254.walltimer", &i8254_walltimer);
+static uint8_t i8254_walltimer_sel;
+static uint16_t i8254_walltimer_cntr;
int adjkerntz; /* local offset from GMT in seconds */
int disable_rtc_set; /* disable resettodr() if != 0 */
@@ -203,7 +200,6 @@
int
acquire_timer2(int mode)
{
-#ifdef TIMER_USE_1
if (timer2_state != RELEASED)
return (-1);
timer2_state = ACQUIRED;
@@ -215,10 +211,6 @@
*/
outb(TIMER_MODE, TIMER_SEL2 | (mode & 0x3f));
return (0);
-#else
- /* Timer2 is being used for time count operation */
- return(-1);
-#endif
}
int
@@ -300,9 +292,9 @@
sysclock_t ret;
clock_lock();
- outb(TIMER_MODE, TIMER_SELX | TIMER_LATCH);
- count = (__uint8_t)inb(TIMER_CNTRX); /* get countdown */
- count |= ((__uint8_t)inb(TIMER_CNTRX) << 8);
+ outb(TIMER_MODE, i8254_walltimer_sel | TIMER_LATCH);
+ count = (__uint8_t)inb(i8254_walltimer_cntr); /* get countdown */
+ count |= ((__uint8_t)inb(i8254_walltimer_cntr) << 8);
count = -count; /* -> countup */
if (count < cputimer_last) /* rollover */
cputimer_base += 0x00010000;
@@ -584,18 +576,25 @@
i8254_restore(void)
{
timer0_state = ACQUIRED;
-#ifdef TIMER_USE_1
- timer1_state = ACQUIRED;
-#else
- timer2_state = ACQUIRED;
-#endif
+ if (i8254_walltimer != 1 && i8254_walltimer != 2)
+ i8254_walltimer = 2;
+
+ if (i8254_walltimer == 1) {
+ i8254_walltimer_sel = TIMER_SEL1;
+ i8254_walltimer_cntr = TIMER_CNTR1;
+ timer1_state = ACQUIRED;
+ } else {
+ i8254_walltimer_sel = TIMER_SEL2;
+ i8254_walltimer_cntr = TIMER_CNTR2;
+ timer2_state = ACQUIRED;
+ }
clock_lock();
outb(TIMER_MODE, TIMER_SEL0 | TIMER_SWSTROBE | TIMER_16BIT);
outb(TIMER_CNTR0, 2); /* lsb */
outb(TIMER_CNTR0, 0); /* msb */
- outb(TIMER_MODE, TIMER_SELX | TIMER_RATEGEN | TIMER_16BIT);
- outb(TIMER_CNTRX, 0); /* lsb */
- outb(TIMER_CNTRX, 0); /* msb */
+ outb(TIMER_MODE, i8254_walltimer_sel | TIMER_RATEGEN | TIMER_16BIT);
+ outb(i8254_walltimer_cntr, 0); /* lsb */
+ outb(i8254_walltimer_cntr, 0); /* msb */
outb(IO_PPI, inb(IO_PPI) | 1); /* bit 0: enable gate, bit 1: spkr */
clock_unlock();
}
@@ -1118,7 +1117,10 @@
}
SYSCTL_NODE(_hw, OID_AUTO, i8254, CTLFLAG_RW, 0, "I8254");
-SYSCTL_UINT(_hw_i8254, OID_AUTO, freq, CTLFLAG_RD, &cputimer_freq, 0, "");
+SYSCTL_UINT(_hw_i8254, OID_AUTO, freq, CTLFLAG_RD, &cputimer_freq, 0,
+ "frequency");
SYSCTL_PROC(_hw_i8254, OID_AUTO, timestamp, CTLTYPE_STRING|CTLFLAG_RD,
0, 0, hw_i8254_timestamp, "A", "");
+SYSCTL_INT(_hw_i8254, OID_AUTO, walltimer, CTLFLAG_RD, &i8254_walltimer, 0,
+ "timer used for the wall time; either 1 or 2");
[
Date Prev][
Date Next]
[
Thread Prev][
Thread Next]
[
Date Index][
Thread Index]