DragonFly kernel List (threaded) for 2008-12
DragonFly BSD
DragonFly kernel List (threaded) for 2008-12
[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]

Re: Asus EEE, acpi and nata driver


From: Hasso Tepper <hasso@xxxxxxxxx>
Date: Mon, 22 Dec 2008 19:32:23 +0200

Dmitry Komissaroff wrote:
> With help from Hasso Tepper patch placed at
> http://leaf.dragonflybsd.org/~hasso/0001-Updating-of-acpi-subsystem.pat
>ch.bz2

Quick test in my Thinkpad X61s. Most of stuff even works, but if_em and 
ehci deadlock the system. Verbose dmesg (without sound, usb and if_em) is 
attached.

-- 
Hasso Tepper
Copyright (c) 2003-2008 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
DragonFly 2.1.1-DEVELOPMENT #103: Mon Dec 22 16:33:40 EET 2008
    hasso@pos.estpak.ee:/usr/obj/home/hasso/dragonfly-src/sys/GENERIC
Calibrating clock(s) ... TSC clock: 1596024176 Hz, i8254 clock: 1193200 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Intel(R) Core(TM)2 Duo CPU     L7500  @ 1.60GHz (1596.01-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  Hyperthreading: 2 logical CPUs
real memory  = 2040528896 (1992704K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009cfff, 638976 bytes (156 pages)
0x0090c000 - 0x799effff, 2030977024 bytes (495844 pages)
avail memory = 1965891584 (1919816K bytes)
SMP: CPU0 apic_initialize():
     lint0: 0x00000700 lint1: 0x00010400 TPR: 0x0000008f SVR: 0x000001ff
DragonFly/MP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  0, version: 0x00050014, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x00050014, at 0xfee00000
 Warning: APIC I/O disabled
Finish MP startup
SMP: AP CPU #1 Launched!
SMP: CPU1 apic_initialize():
     lint0: 0x00010000 lint1: 0x00010400 TPR: 0x0000008f SVR: 0x000001ff
Active CPU Mask: 00000003
bios32: Found BIOS32 Service Directory header at 0xc00f6900
bios32: Entry = 0xfdc80 (c00fdc80)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0x1b7
pnpbios: Found PnP BIOS data at 0xc00f69a0
pnpbios: Entry = f0000:b83b  Rev = 1.0
Other BIOS signatures found:
objcache(exec-args): too small for ncpus, adjusting cluster_limit 16->32
Preloaded elf kernel "/boot/kernel" at 0xc08df000.
Preloaded elf module "/boot/modules/if_ath.ko" at 0xc08df3a8.
ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
Preloaded elf module "/boot/modules/ath_hal.ko" at 0xc08df454.
Preloaded elf module "/boot/modules/ath_rate.ko" at 0xc08df504.
Preloaded elf module "/boot/modules/est_core.ko" at 0xc08df5b4.
Preloaded elf module "/boot/modules/netbt.ko" at 0xc08df664.
Preloaded elf module "/boot/modules/cmx.ko" at 0xc08df710.
Preloaded elf module "/boot/modules/acpi.ko" at 0xc08df7bc.
Preloaded elf module "/boot/modules/acpi_video.ko" at 0xc08df868.
EST_CORE: MISC_ENABLE MSR:
EST_CORE:   value = 0x1364972489
EST_CORE:   EST = enabled
EST_CORE:   EST LOCK = enabled
EST_CORE: FSB_FREQ MSR:
EST_CORE:   value = 0x1a2
EST_CORE:   scaleable bus speed = 200MHz (FSB = 800MHz)
EST_CORE: PERF_STAT MSR:
EST_CORE:   value = 0x615081a0600081a
EST_CORE:   cur bus ratio = 8 (cur frequency = 1600MHz)
EST_CORE:   max bus ratio = 8 (max frequency = 1600MHz)
EST_CORE: old msr = 615081a0600081a
EST_CORE: new msr = 615081a0600061a
EST_CORE:   min bus ratio = 6 (min frequency = 1200MHz)
EST_CORE: old msr = 615081a0600061a
EST_CORE: new msr = 615081a0600081a
EST_CORE:   cur bus ratio = 8 (cur frequency = 1600MHz)
EST_CORE:   cur voltage = 1116mV
EST_CORE: old msr = 615081a0600081a
EST_CORE: new msr = 615081a0600081a
EST_CORE:   max voltage = 1116mV
EST_CORE: old msr = 615081a0600081a
EST_CORE: new msr = 615081a0600080f
EST_CORE:   min voltage = 940mV
EST_CORE: old msr = 615081a0600080f
EST_CORE: new msr = 615081a0600081a
EST_CORE:   cur voltage = 1116mV
start scheduler helpers on cpus: 0 1
start dummy scheduler helpers on cpus: 0 1
wlan: <802.11 Link Layer>
crypto: <crypto core>
Pentium Pro MTRR support enabled
md0: Malloc disk
Math emulator present
pci_open(1):    mode 1 addr port (0x0cf8) is 0x8000fa04
pci_open(1a):   mode1res=0x80000000 (0x80000000)
pci_cfgcheck:   device 0 [class=060000] [hdr=00] is there (id=2a008086)
pcibios: BIOS version 3.00
ACPI: RSDP @ 0x0xf6950/0x0024 (v  2 LENOVO)
ACPI: XSDT @ 0x0x7d6bd368/0x0094 (v  1 LENOVO TP-7N    0x00002180  LTP 0x00000000)
ACPI: FACP @ 0x0x7d6bd500/0x00F4 (v  3 LENOVO TP-7N    0x00002180 LNVO 0x00000001)
ACPI Warning (tbfadt-0626): 32/64X length mismatch in Gpe0Block: 64/32 [20081204]
ACPI Warning (tbfadt-0626): 32/64X length mismatch in Gpe1Block: 0/32 [20081204]
ACPI Warning (tbfadt-0652): Optional field Gpe1Block has zero address or length:        0    102C/0 [20081204]
ACPI: DSDT @ 0x0x7d6bd8db/0xE32A (v  1 LENOVO TP-7N    0x00002180 MSFT 0x03000000)
ACPI: FACS @ 0x0x7d6e4000/0x0040
ACPI: SSDT @ 0x0x7d6bd6b4/0x0227 (v  1 LENOVO TP-7N    0x00002180 MSFT 0x03000000)
ACPI: ECDT @ 0x0x7d6cbc05/0x0052 (v  1 LENOVO TP-7N    0x00002180 LNVO 0x00000001)
ACPI: TCPA @ 0x0x7d6cbc57/0x0032 (v  2 LENOVO TP-7N    0x00002180 LNVO 0x00000001)
ACPI: APIC @ 0x0x7d6cbc89/0x0068 (v  1 LENOVO TP-7N    0x00002180 LNVO 0x00000001)
ACPI: MCFG @ 0x0x7d6cbcf1/0x003C (v  1 LENOVO TP-7N    0x00002180 LNVO 0x00000001)
ACPI: HPET @ 0x0x7d6cbd2d/0x0038 (v  1 LENOVO TP-7N    0x00002180 LNVO 0x00000001)
ACPI: SLIC @ 0x0x7d6cbdf0/0x0176 (v  1 LENOVO TP-7N    0x00002180  LTP 0x00000000)
ACPI: BOOT @ 0x0x7d6cbf66/0x0028 (v  1 LENOVO TP-7N    0x00002180  LTP 0x00000001)
ACPI: ASF! @ 0x0x7d6cbf8e/0x0072 (v 16 LENOVO TP-7N    0x00002180 PTL  0x00000001)
ACPI: SSDT @ 0x0x7d6e2697/0x025F (v  1 LENOVO TP-7N    0x00002180 INTL 0x20050513)
ACPI: SSDT @ 0x0x7d6e28f6/0x00A6 (v  1 LENOVO TP-7N    0x00002180 INTL 0x20050513)
ACPI: SSDT @ 0x0x7d6e299c/0x04F7 (v  1 LENOVO TP-7N    0x00002180 INTL 0x20050513)
ACPI: SSDT @ 0x0x7d6e2e93/0x01D8 (v  1 LENOVO TP-7N    0x00002180 INTL 0x20050513)
npx0.nexus0.root0
npx0: <math processor> [tentative] on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
npx0: <math processor> [attached!] on motherboard
acpi0.nexus0.root0
acpi0: <LENOVO TP-7N> [tentative] on motherboard
acpi_ec0.acpi0.nexus0.root0
acpi_ec0: <Embedded Controller: GPE 0x12, ECDT> [tentative] port 0x66,0x62 on acpi0
acpi_ec0: <Embedded Controller: GPE 0x12, ECDT> [attached!] port 0x66,0x62 on acpi0
AcpiOsDerivePciId: bus 0 dev 0 func 0
AcpiOsDerivePciId: bus 0 dev 29 func 7
AcpiOsDerivePciId: bus 0 dev 26 func 7
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device.  You can't run both
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi_ec0: info: new max delay is 40 us
acpi_ec0: info: new max delay is 50 us
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks GOOD min = 5, max = 7, width = 2
acpi_timer0.acpi0.nexus0.root0
acpi_timer0: <24-bit timer at 3.579545MHz> [tentative] port 0x1008-0x100b on acpi0
acpi_timer0: <24-bit timer at 3.579545MHz> [attached!] port 0x1008-0x100b on acpi0
cpu0.acpi0.nexus0.root0
cpu0: <ACPI CPU> [tentative] on acpi0
ACPI: SSDT @ 0x0x7d6e1e39/0x085E (v  1  PmRef  Cpu0Cst 0x00000100 INTL 0x20050513)
ACPI: SSDT @ 0x0x7d6e1b32/0x0282 (v  1  PmRef  Cpu0Ist 0x00000100 INTL 0x20050513)
cpu0: <ACPI CPU> [attached!] port 0x1015,0x1014 on acpi0
cpu1.acpi0.nexus0.root0
cpu1: <ACPI CPU> [tentative] on acpi0
ACPI: SSDT @ 0x0x7d6e1db4/0x0085 (v  1  PmRef  Cpu1Cst 0x00000100 INTL 0x20050513)
ACPI: SSDT @ 0x0x7d6e1a6a/0x00C8 (v  1  PmRef  Cpu1Ist 0x00000100 INTL 0x20050513)
cpu1: <ACPI CPU> [attached!] port 0x1015,0x1014 on acpi0
acpi_tz0.acpi0.nexus0.root0
acpi_tz0: <Thermal Zone> [tentative] on acpi0
acpi_tz0: <Thermal Zone> [attached!] on acpi0
acpi_tz1.acpi0.nexus0.root0
acpi_tz1: <Thermal Zone> [tentative] on acpi0
acpi_tz1: <Thermal Zone> [attached!] on acpi0
acpi_lid0.acpi0.nexus0.root0
acpi_lid0: <Control Method Lid Switch> [tentative] on acpi0
acpi_lid0: <Control Method Lid Switch> [attached!] on acpi0
acpi_button0.acpi0.nexus0.root0
acpi_button0: <Sleep Button> [tentative] on acpi0
acpi_button0: <Sleep Button> [attached!] on acpi0
pcib0.acpi0.nexus0.root0
pcib0: <ACPI Host-PCI bridge> [tentative] port 0xcf8-0xcff on acpi0
ACPI Warning (PCI_LINK-0274): invalid IRQ 0
 [20081204]
ACPI Warning (PCI_LINK-0274): invalid IRQ 0
 [20081204]
ACPI Warning (PCI_LINK-0274): invalid IRQ 0
 [20081204]
ACPI Warning (PCI_LINK-0274): invalid IRQ 0
 [20081204]
ACPI Warning (PCI_LINK-0274): invalid IRQ 0
 [20081204]
ACPI Warning (PCI_LINK-0274): invalid IRQ 0
 [20081204]
ACPI Warning (PCI_LINK-0274): invalid IRQ 0
 [20081204]
ACPI Warning (PCI_LINK-0274): invalid IRQ 0
 [20081204]
ACPI Warning (PCI_LINK-0274): invalid IRQ 0
 [20081204]
ACPI Warning (PCI_LINK-0274): invalid IRQ 0
 [20081204]
ACPI Warning (PCI_LINK-0274): invalid IRQ 0
 [20081204]
ACPI Warning (PCI_LINK-0274): invalid IRQ 0
 [20081204]
ACPI Warning (PCI_LINK-0274): invalid IRQ 0
 [20081204]
ACPI Warning (PCI_LINK-0274): invalid IRQ 0
 [20081204]
ACPI Warning (PCI_LINK-0274): invalid IRQ 0
 [20081204]
ACPI Warning (PCI_LINK-0274): invalid IRQ 0
 [20081204]
ACPI Warning (PCI_LINK-0274): invalid IRQ 0
 [20081204]
ACPI Warning (PCI_LINK-0274): invalid IRQ 0
 [20081204]
ACPI PCI link initial configuration:
\\_SB_.LNKA irq  10: [  3  7  0  0] low,level,sharable 0.1.0
\\_SB_.LNKA irq  10: [  3  7  0  0] low,level,sharable 0.2.0
\\_SB_.LNKA irq  10: [  3  7  0  0] low,level,sharable 0.3.0
\\_SB_.LNKB irq  11: [  3  7  0  0  0192] low,level,sharable 0.3.1
\\_SB_.LNKC irq  11: [  3  7  0  0  0192] low,level,sharable 0.3.2
\\_SB_.LNKD irq  11: [  3  7  0  0  0192] low,level,sharable 0.3.3
\\_SB_.LNKE irq  11: [  3  7  0  0  0192] low,level,sharable 0.25.0
\\_SB_.LNKE irq  11: [  3  7  0  0  0192] low,level,sharable 0.26.0
\\_SB_.LNKF irq  11: [  3  7  0  0  0192] low,level,sharable 0.26.1
\\_SB_.LNKG irq  11: [  3  7  0  0  0192] low,level,sharable 0.26.2
\\_SB_.LNKB irq  11: [  3  7  0  0  0192] low,level,sharable 0.27.1
\\_SB_.LNKE irq  11: [  3  7  0  0  0192] low,level,sharable 0.28.0
\\_SB_.LNKF irq  11: [  3  7  0  0  0192] low,level,sharable 0.28.1
\\_SB_.LNKG irq  11: [  3  7  0  0  0192] low,level,sharable 0.28.2
\\_SB_.LNKH irq  11: [  3  7  0  0  0192] low,level,sharable 0.28.3
\\_SB_.LNKA irq  10: [  3  7  0  0] low,level,sharable 0.29.0
\\_SB_.LNKB irq  11: [  3  7  0  0  0192] low,level,sharable 0.29.1
\\_SB_.LNKC irq  11: [  3  7  0  0  0192] low,level,sharable 0.29.2
\\_SB_.LNKD irq  11: [  3  7  0  0  0192] low,level,sharable 0.29.3
\\_SB_.LNKH irq  11: [  3  7  0  0  0192] low,level,sharable 0.31.0
\\_SB_.LNKA irq  10: [  3  7  0  0] low,level,sharable 0.31.2
\\_SB_.LNKA irq  10: [  3  7  0  0] low,level,sharable 0.31.1
ACPI PCI link before setting link priority:
ACPI PCI link before fixup for boot-disabled links:
ACPI PCI link after fixup for boot-disabled links:
ACPI PCI link arbitrated configuration:
\\_SB_.LNKA irq  10: [  3  7  0  0] low,level,sharable 0.1.0
\\_SB_.LNKA irq  10: [  3  7  0  0] low,level,sharable 0.2.0
\\_SB_.LNKA irq  10: [  3  7  0  0] low,level,sharable 0.3.0
\\_SB_.LNKB irq  11: [  3  7  0  0  0192] low,level,sharable 0.3.1
\\_SB_.LNKC irq  11: [  3  7  0  0  0192] low,level,sharable 0.3.2
\\_SB_.LNKD irq  11: [  3  7  0  0  0192] low,level,sharable 0.3.3
\\_SB_.LNKE irq  11: [  3  7  0  0  0192] low,level,sharable 0.25.0
\\_SB_.LNKE irq  11: [  3  7  0  0  0192] low,level,sharable 0.26.0
\\_SB_.LNKF irq  11: [  3  7  0  0  0192] low,level,sharable 0.26.1
\\_SB_.LNKG irq  11: [  3  7  0  0  0192] low,level,sharable 0.26.2
\\_SB_.LNKB irq  11: [  3  7  0  0  0192] low,level,sharable 0.27.1
\\_SB_.LNKE irq  11: [  3  7  0  0  0192] low,level,sharable 0.28.0
\\_SB_.LNKF irq  11: [  3  7  0  0  0192] low,level,sharable 0.28.1
\\_SB_.LNKG irq  11: [  3  7  0  0  0192] low,level,sharable 0.28.2
\\_SB_.LNKH irq  11: [  3  7  0  0  0192] low,level,sharable 0.28.3
\\_SB_.LNKA irq  10: [  3  7  0  0] low,level,sharable 0.29.0
\\_SB_.LNKB irq  11: [  3  7  0  0  0192] low,level,sharable 0.29.1
\\_SB_.LNKC irq  11: [  3  7  0  0  0192] low,level,sharable 0.29.2
\\_SB_.LNKD irq  11: [  3  7  0  0  0192] low,level,sharable 0.29.3
\\_SB_.LNKH irq  11: [  3  7  0  0  0192] low,level,sharable 0.31.0
\\_SB_.LNKA irq  10: [  3  7  0  0] low,level,sharable 0.31.2
\\_SB_.LNKA irq  10: [  3  7  0  0] low,level,sharable 0.31.1
pci0.pcib0.acpi0.nexus0.root0
pci0: <ACPI PCI bus> [tentative] on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x2a00, revid=0x0c
        bus=0, slot=0, func=0
        class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        map[10]: type 1, range 64, base f8000000, size 20
        map[18]: type 1, range 64, base e0000000, size 28
        map[20]: type 1, range 32, base 00001800, size  3
found-> vendor=0x8086, dev=0x2a02, revid=0x0c
        bus=0, slot=2, func=0
        class=[DISPLAY]03-00-00, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
        intpin=a, irq=10
        map[10]: type 1, range 64, base f8100000, size 20
found-> vendor=0x8086, dev=0x2a03, revid=0x0c
        bus=0, slot=2, func=1
        class=[DISPLAY]03-80-00, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
        map[10]: type 1, range 32, base f8200000, size 17
        map[14]: type 1, range 32, base f8225000, size 12
        map[18]: type 1, range 32, base 00001840, size  5
found-> vendor=0x8086, dev=0x1049, revid=0x03
        bus=0, slot=25, func=0
        class=[NETWORK]02-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=a, irq=11
        map[20]: type 1, range 32, base 00001860, size  5
found-> vendor=0x8086, dev=0x2834, revid=0x03
        bus=0, slot=26, func=0
        class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
        intpin=a, irq=11
        map[20]: type 1, range 32, base 00001880, size  5
found-> vendor=0x8086, dev=0x2835, revid=0x03
        bus=0, slot=26, func=1
        class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=b, irq=11
        map[10]: type 1, range 32, base f8426c00, size 10
found-> vendor=0x8086, dev=0x283a, revid=0x03
        bus=0, slot=26, func=7
        class=[SERIALBUS]0c-03-20, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=c, irq=11
        map[10]: type 1, range 64, base f8220000, size 14
found-> vendor=0x8086, dev=0x284b, revid=0x03
        bus=0, slot=27, func=0
        class=[MULTIMEDIA]04-03-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=b, irq=11
        PCI Express ver.1 cap=0x0091
found-> vendor=0x8086, dev=0x283f, revid=0x03
        bus=0, slot=28, func=0
        class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=1
        subordinatebus=2        secondarybus=2
        intpin=a, irq=11
        PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x0010a0e0[HOTPLUG]
found-> vendor=0x8086, dev=0x2841, revid=0x03
        bus=0, slot=28, func=1
        class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=1
        subordinatebus=3        secondarybus=3
        intpin=b, irq=11
        PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x0018a0e0[HOTPLUG]
        map[20]: type 1, range 32, base 000018a0, size  5
found-> vendor=0x8086, dev=0x2830, revid=0x03
        bus=0, slot=29, func=0
        class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
        intpin=a, irq=10
        map[20]: type 1, range 32, base 000018c0, size  5
found-> vendor=0x8086, dev=0x2831, revid=0x03
        bus=0, slot=29, func=1
        class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=b, irq=11
        map[10]: type 1, range 32, base f8427000, size 10
found-> vendor=0x8086, dev=0x2836, revid=0x03
        bus=0, slot=29, func=7
        class=[SERIALBUS]0c-03-20, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=d, irq=11
found-> vendor=0x8086, dev=0x2448, revid=0xf3
        bus=0, slot=30, func=0
        class=[BRIDGE]06-04-01, hdrtype=0x01, mfdev=0
        subordinatebus=8        secondarybus=5
found-> vendor=0x8086, dev=0x2811, revid=0x03
        bus=0, slot=31, func=0
        class=[BRIDGE]06-01-00, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
        map[20]: type 1, range 32, base 000018e0, size  4
found-> vendor=0x8086, dev=0x2850, revid=0x03
        bus=0, slot=31, func=1
        class=[STORAGE]01-01-8a, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=c, irq=255
        map[10]: type 1, range 32, base 00001c30, size  3
        map[14]: type 1, range 32, base 00001c24, size  2
        map[18]: type 3, range 32, base 00001c28, size  3
        map[1c]: type 1, range 32, base 00001c20, size  2
        map[20]: type 1, range 32, base 00001c00, size  5
        map[24]: type 1, range 32, base f8426000, size 11
found-> vendor=0x8086, dev=0x2829, revid=0x03
        bus=0, slot=31, func=2
        class=[STORAGE]01-06-01, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=b, irq=10
        map[10]: type 1, range 32, base f8427400, size  8
        map[20]: type 1, range 32, base 00001c40, size  5
found-> vendor=0x8086, dev=0x283e, revid=0x03
        bus=0, slot=31, func=3
        class=[SERIALBUS]0c-05-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=a, irq=11
agp0.pci0.pcib0.acpi0.nexus0.root0
agp0: <Intel GM965 SVGA controller> [tentative] port 0x1800-0x1807 mem 0xe0000000-0xefffffff,0xf8000000-0xf80fffff irq 10 at device 2.0 on pci0
agp0: detected 7676k stolen memory
agp0: aperture size is 256M
agp0: <Intel GM965 SVGA controller> [attached!] port 0x1800-0x1807 mem 0xe0000000-0xefffffff,0xf8000000-0xf80fffff irq 10 at device 2.0 on pci0
pci0: <unknown card> (vendor=0x8086, dev=0x2a03) at 2.1
pci0:2:1: Transition from D0 to D3
pci0: <unknown card> (vendor=0x8086, dev=0x1049) at 25.0 irq 11
pci0:25:0: Transition from D0 to D3
pci0: Failed to set ACPI power state D3 on (null): AE_BAD_PARAMETER
pci0: <UHCI USB controller> (vendor=0x8086, dev=0x2834) at 26.0 irq 11
pci0: <UHCI USB controller> (vendor=0x8086, dev=0x2835) at 26.1 irq 11
pci0: <USB controller> (vendor=0x8086, dev=0x283a) at 26.7 irq 11
pci0:26:7: Transition from D0 to D3
pci0: <unknown card> (vendor=0x8086, dev=0x284b) at 27.0 irq 11
pci0:27:0: Transition from D0 to D3
pci0: Failed to set ACPI power state D3 on (null): AE_BAD_PARAMETER
pcib1.pci0.pcib0.acpi0.nexus0.root0
pcib1: <PCI to PCI bridge (vendor=8086 device=283f)> [tentative] irq 11 at device 28.0 on pci0
pcib1:   secondary bus     2
pcib1:   subordinate bus   2
pcib1:   I/O decode        0x2000-0x2fff
pcib1:   memory decode     0xf4000000-0xf5ffffff
pcib1:   prefetched decode 0xf8500000-0xf85fffff
pci2.pcib1.pci0.pcib0.acpi0.nexus0.root0
pci2: <PCI bus> [tentative] on pcib1
pci2: pci_attach() physical bus=2
pci2: <PCI bus> [attached!] on pcib1
pcib1: <PCI to PCI bridge (vendor=8086 device=283f)> [attached!] irq 11 at device 28.0 on pci0
pcib2.pci0.pcib0.acpi0.nexus0.root0
pcib2: <PCI to PCI bridge (vendor=8086 device=2841)> [tentative] irq 11 at device 28.1 on pci0
pcib2:   secondary bus     3
pcib2:   subordinate bus   3
pcib2:   I/O decode        0x3000-0x3fff
pcib2:   memory decode     0xf6000000-0xf7ffffff
pcib2:   prefetched decode 0xf8600000-0xf86fffff
pci3.pcib2.pci0.pcib0.acpi0.nexus0.root0
pci3: <PCI bus> [tentative] on pcib2
pci3: pci_attach() physical bus=3
        map[10]: type 1, range 64, base f7f00000, size 16
found-> vendor=0x168c, dev=0x0024, revid=0x01
        bus=3, slot=0, func=0
        class=[NETWORK]02-80-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=a, irq=11
        PCI Express ver.1 cap=0x0011[LEGDEV]
ath0.pci3.pcib2.pci0.pcib0.acpi0.nexus0.root0
ath0: <Atheros 5418> [tentative] mem 0xf7f00000-0xf7f0ffff irq 11 at device 0.0 on pci3
pcib2: device ath0 requested decoded memory range 0xf7f00000-0xf7f0ffff
ath0: four TX queues
ath0: bpf attached
ath0: MAC address: 00:16:cf:b2:8f:5a
ath0: bpf attached
ath0: bpf attached
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: mac 12.10 phy 8.1 radio 12.0
ath0: Use hw queue 1 for WME_AC_BE traffic
ath0: Use hw queue 0 for WME_AC_BK traffic
ath0: Use hw queue 2 for WME_AC_VI traffic
ath0: Use hw queue 3 for WME_AC_VO traffic
ath0: Use hw queue 8 for CAB traffic
ath0: Use hw queue 9 for beacons
ath0: <Atheros 5418> [attached!] mem 0xf7f00000-0xf7f0ffff irq 11 at device 0.0 on pci3
pci3: <PCI bus> [attached!] on pcib2
pcib2: <PCI to PCI bridge (vendor=8086 device=2841)> [attached!] irq 11 at device 28.1 on pci0
pci0: <UHCI USB controller> (vendor=0x8086, dev=0x2830) at 29.0 irq 10
pci0: <UHCI USB controller> (vendor=0x8086, dev=0x2831) at 29.1 irq 11
pci0: <USB controller> (vendor=0x8086, dev=0x2836) at 29.7 irq 11
pci0:29:7: Transition from D0 to D3
pcib3.pci0.pcib0.acpi0.nexus0.root0
pcib3: <PCI to PCI bridge (vendor=8086 device=2448)> [tentative] at device 30.0 on pci0
pcib3:   secondary bus     5
pcib3:   subordinate bus   8
pcib3:   I/O decode        0x4000-0x7fff
pcib3:   memory decode     0x0-0x0
pcib3:   prefetched decode 0x0-0x0
pcib3:   Subtractively decoded bridge.
pci5.pcib3.pci0.pcib0.acpi0.nexus0.root0
pci5: <PCI bus> [tentative] on pcib3
pci5: pci_attach() physical bus=5
        map[10]: type 1, range 32, base d7eff000, size 12
found-> vendor=0x1180, dev=0x0476, revid=0xba
        bus=5, slot=0, func=0
        class=[BRIDGE]06-07-00, hdrtype=0x02, mfdev=1
        subordinatebus=8        secondarybus=6
        intpin=a, irq=10
cbb0.pci5.pcib3.pci0.pcib0.acpi0.nexus0.root0
cbb0: <RF5C476 PCI-CardBus Bridge> [tentative] mem 0xd7eff000-0xd7efffff irq 10 at device 0.0 on pci5
pcib3: device cbb0 requested decoded memory range 0xd7eff000-0xd7efffff
cardbus0.cbb0.pci5.pcib3.pci0.pcib0.acpi0.nexus0.root0
cardbus0: <CardBus bus> [tentative] on cbb0
cardbus0: <CardBus bus> [attached!] on cbb0
pccard0.cbb0.pci5.pcib3.pci0.pcib0.acpi0.nexus0.root0
pccard0: <16-bit PCCard bus> [tentative] on cbb0
pccard0: <16-bit PCCard bus> [attached!] on cbb0
cbb0: PCI Configuration space:
  0x00: 0x04761180 0x02100007 0x060700ba 0x00822000
  0x10: 0xd7eff000 0x020000dc 0xb0080605 0xfffff000
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
  0x30: 0x00000000 0xfffffffc 0x00000000 0x0700010a
  0x40: 0x20c617aa 0x00000001 0x00000000 0x00000000
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000
  0x80: 0x04a00001 0x00000000 0x04630463 0x00000000
  0x90: 0x00000000 0x00000000 0x00000000 0x00000000
  0xa0: 0x00000000 0x01000000 0x00f00000 0x00000003
  0xb0: 0x00000000 0xbe000000 0x00003000 0x00000000
  0xc0: 0x20c617aa 0x00000000 0x00000000 0x00000000
  0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001
  0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
cbb0: <RF5C476 PCI-CardBus Bridge> [attached!] mem 0xd7eff000-0xd7efffff irq 10 at device 0.0 on pci5
pci5: <PCI bus> [attached!] on pcib3
pcib3: <PCI to PCI bridge (vendor=8086 device=2448)> [attached!] at device 30.0 on pci0
isab0.pci0.pcib0.acpi0.nexus0.root0
isab0: <PCI to ISA bridge (vendor=8086 device=2811)> [tentative] at device 31.0 on pci0
isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
isa0: <ISA bus> [tentative] on isab0
isa0: <ISA bus> [attached!] on isab0
isab0: <PCI to ISA bridge (vendor=8086 device=2811)> [attached!] at device 31.0 on pci0
atapci0.pci0.pcib0.acpi0.nexus0.root0
atapci0: <Intel ATA controller> [tentative] port 0x18e0-0x18ef,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0.atapci0.pci0.pcib0.acpi0.nexus0.root0
ata0: <ATA channel 0> [tentative] on atapci0
atapci0: reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=7f ostat1=7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: reset tp2 stat0=ff stat1=ff devices=0x0
ata0: <ATA channel 0> [attached!] on atapci0
ata1.atapci0.pci0.pcib0.acpi0.nexus0.root0
ata1: <ATA channel 1> [tentative] on atapci0
atapci0: reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ata1: <ATA channel 1> [attached!] on atapci0
atapci0: <Intel ATA controller> [attached!] port 0x18e0-0x18ef,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
atapci1.pci0.pcib0.acpi0.nexus0.root0
atapci1: <Intel (ID=28298086) AHCI controller> [tentative] port 0x1c00-0x1c1f,0x1c20-0x1c23,0x1c28-0x1c2f,0x1c24-0x1c27,0x1c30-0x1c37 mem 0xf8426000-0xf84267ff irq 10 at device 31.2 on pci0
atapci1: AHCI Version 01.10 controller with 3 ports detected
ata2.atapci1.pci0.pcib0.acpi0.nexus0.root0
ata2: <ATA channel 0> [tentative] on atapci1
ata2: SATA connect time=0ms
ata2: ahci_reset devices=0x1<ATA_MASTER>
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
ad4: Intel check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
ad4: 76319MB <HITACHI HTS541680J9SA00 SB2IC7UP> at ata2-master SATA150
ad4: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue
ata2: <ATA channel 0> [attached!] on atapci1
ata3.atapci1.pci0.pcib0.acpi0.nexus0.root0
ata3: <ATA channel 1> [tentative] on atapci1
ata3: port not implemented
ata3: <ATA channel 1> [attached!] on atapci1
ata4.atapci1.pci0.pcib0.acpi0.nexus0.root0
ata4: <ATA channel 2> [tentative] on atapci1
ata4: SATA connect status=00000000
ata4: ahci_reset devices=0x0
ata4: <ATA channel 2> [attached!] on atapci1
atapci1: <Intel (ID=28298086) AHCI controller> [attached!] port 0x1c00-0x1c1f,0x1c20-0x1c23,0x1c28-0x1c2f,0x1c24-0x1c27,0x1c30-0x1c37 mem 0xf8426000-0xf84267ff irq 10 at device 31.2 on pci0
pci0: <unknown card> (vendor=0x8086, dev=0x283e) at 31.3 irq 11
pci0: <ACPI PCI bus> [attached!] on pcib0
pcib0: <ACPI Host-PCI bridge> [attached!] port 0xcf8-0xcff on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
acpi_video0.acpi0.nexus0.root0
acpi_video0: <ACPI video extension> [tentative] on acpi0
found Internal/Integrated Digital Flat Panel(400), idx#0, port#0, head #0
found VGA CRT or VESA Compatible Analog Monitor(100), idx#0, port#0, head #0
found External Digital Monitor(300), idx#0, port#0, head #0
acpi_video0: <ACPI video extension> [attached!] on acpi0
atkbdc0.acpi0.nexus0.root0
atkbdc0: <Keyboard controller (i8042)> [tentative] port 0x64,0x60 irq 1 on acpi0
atkbd0.atkbdc0.acpi0.nexus0.root0
atkbd0: <AT Keyboard> [tentative] flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x54ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
atkbd0: <AT Keyboard> [attached!] flags 0x1 irq 1 on atkbdc0
psm0: current command byte:0047
psm0.atkbdc0.acpi0.nexus0.root0
psm0: <PS/2 Mouse> [tentative] irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
psm0: <PS/2 Mouse> [attached!] irq 12 on atkbdc0
atkbdc0: <Keyboard controller (i8042)> [attached!] port 0x64,0x60 irq 1 on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
acpi_video1.acpi0.nexus0.root0
acpi_video1: <ACPI video extension> [tentative] on acpi0
found Internal/Integrated Digital Flat Panel(110), idx#0, port#1, head #0
found VGA CRT or VESA Compatible Analog Monitor(100), idx#0, port#0, head #0
found TV/HDTV or Analog-Video Monitor(210), idx#0, port#1, head #0
acpi_video1: <ACPI video extension> [attached!] on acpi0
acpi_ec0: info: new max delay is 60 us
battery0.acpi0.nexus0.root0
battery0: <ACPI Control Method Battery> [tentative] on acpi0
battery0: <ACPI Control Method Battery> [attached!] on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
acpi_acad0.acpi0.nexus0.root0
acpi_acad0: <AC Adapter> [tentative] on acpi0
acpi_acad0: <AC Adapter> [attached!] on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
acpi0: <LENOVO TP-7N> [attached!] at irq 9 on motherboard
legacypci0: PCI subsystem owned by acpi, skipping scan
ex_isa_identify()
atkbdc-: atkbdc0 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ahc_isa_probe 1: ioport 0x1c00 alloc failed
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
pmtimer0 [tentative] on isa0
pmtimer0 [attached!] on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 [tentative] failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
adv0 [tentative] failed to probe on isa0
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 [tentative] failed to probe at port 0x134-0x137 on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 [tentative] failed to probe at port 0x134-0x137 on isa0
aic0 [tentative] failed to probe at port 0x140-0x15f on isa0
atkbdc1: <Keyboard controller (i8042)> [tentative] failed to probe at port 0x60 on isa0
vga0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
sc0: <System console> [tentative] at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sc0: <System console> [attached!] at flags 0x100 on isa0
lm0 [tentative] failed to probe at port 0x290-0x297 on isa0
it0 [tentative] failed to probe at port 0x290-0x297 on isa0
it1 [tentative] failed to probe at port 0xc00 on isa0
it2 [tentative] failed to probe at port 0xd00-0xd07 on isa0
sio0: can't drain, serial port might not exist, disabling
sio0 [tentative] failed to probe at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio1: can't drain, serial port might not exist, disabling
sio1 [tentative] failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x3bc
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> [tentative] failed to probe at port 0x3bc-0x3c3 irq 7 on isa0
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
cs0: not probed (disabled)
sn0: not probed (disabled)
isa_probe_children: probing PnP devices
BIOS Geometries:
 0:03feef3f 0..1022=1023 cylinders, 0..239=240 heads, 1..63=63 sectors
 0 accounted for
Device configuration finished.
battery0: battery initialization start
acpi_ec0: info: new max delay is 80 us
acpi_ec0: info: new max delay is 190 us
battery0: battery initialization done, tried 1 times
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
sl0: bpf attached
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
faith0: bpf attached
lo0: bpf attached
ppp0: bpf attached
bootdev: a0200000 type=0 unit=0 slice=2 part=0 major=3
ad4s1: type 0xa5, start 63, end = 156296447, size 156296385 : OK
ATA PseudoRAID loaded
Mounting root from ufs:/dev/ad4s1a
ad4s1: type 0xa5, start 63, end = 156296447, size 156296385 : OK
start_init: trying /sbin/init


[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]