Re: Decision time.... should NATA become the default for this release?

[Sascha Wildner <saw@xxxxxxxxx>]

Matthew Dillon wrote:
>     The devices will print out on the console before it gets to that,
>     right ?  That's what I need.  If the scroll buffer isn't big enough
>     we can figure out how to increase it.

OK, relevant lines from NATA and ATA follow.

NATA dmesg:

atapci0.pci0.pcib0.legacypci0.nexus0.root0
atapci0: <Intel PIIX4 UDMA33 controller> [tentative] port 
0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata0: <ATA channel 0> [tentative] on atapci0
atapci0: reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: setting PIO4 on PIIX4 chip
ad0: setting UDMA33 on PIIX4 chip
ad0: Intel check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ad0: 28667MB <SAMSUNG MP0302H UP100-11> at ata0-master UDMA33
ad0: 58711968 sectors [58246C/16H/63S] 16 sectors/interrupt 1 depth queue
ata0: <ATA channel 0> [attached!] on atapci0
ata1.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata1: <ATA channel 1> [tentative] on atapci0
atapci0: reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x04 lsb=0x04 msb=0x04
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on PIIX4 chip
acd0: setting UDMA33 on PIIX4 chip
acd0: <TOSHIBA CD-ROM XM-7002B/1005> CDROM drive at ata1 as master
acd0: read 4134KB/s (4134KB/s), 128KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream
acd0: Writes:
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata1: <ATA channel 1> [attached!] on atapci0
atapci0: <Intel PIIX4 UDMA33 controller> [attached!] port 
0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0

ATA dmesg:

atapci0.pci0.pcib0.legacypci0.nexus0.root0
atapci0: <Intel PIIX4 ATA33 controller> [tentative] port 0xffa0-0xffaf 
at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xffa0
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata0 [tentative]: at 0x1f0 irq 14 on atapci0
ad0: success setting UDMA2 on Intel chip
ad0: <SAMSUNG MP0302H/UP100-11> ATA-7 disk at ata0-master
ad0: 28667MB (58711968 sectors), 58246 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
ata0 [attached!]: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xffa8
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 00 00
ata1: mask=03 stat0=00 stat1=00
ata1: devices=04
ata1.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata1 [tentative]: at 0x170 irq 15 on atapci0
ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <TOSHIBA CD-ROM XM-7002B/1005> CDROM drive at ata1 as master
acd0: read 4134KB/s (34515KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream
acd0: Writes:
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata1 [attached!]: at 0x170 irq 15 on atapci0
atapci0: <Intel PIIX4 ATA33 controller> [attached!] port 0xffa0-0xffaf 
at device 7.1 on pci0
adv0 [tentative] failed to probe on isa0
ad0s1: type 0xa5, start 63, end = 58711967, size 58711905 : OK

--
http://yoyodyne.ath.cx