DragonFly BSD
DragonFly kernel List (threaded) for 2004-10
[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]

Re: uplcom(4) problem


From: Rahul Siddharthan <rsidd@xxxxxxxxx>
Date: 17 Oct 2004 06:05:25 GMT
Keywords:
Summary:

Matthew Dillon wrote:
>    The fix was in ucom.c, which uplcom uses.  Go back to the original 0x41
>    and get the latest ucom.c (1.17).

That's the version I'm using.  No luck with either the original
uplcom.c or with 0x61 in uplcom.c.

dmesg says
   uhci0: <VIA 83C572 USB controller> port 0x2000-0x201f irq 10 at device 11.0 on pci0
   installed MI handler for int 10
   usb0: <VIA 83C572 USB controller> on uhci0
   usb0: USB revision 1.0
   uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
   uhub0: 2 ports with 2 removable, self powered
   uhub0: port error, restarting port 1
   uhub0: port error, giving up port 1
   uhci1: <VIA 83C572 USB controller> port 0x2020-0x203f irq 10 at device 11.1 on pci0
   usb1: <VIA 83C572 USB controller> on uhci1
   usb1: USB revision 1.0
   uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
   uhub1: 2 ports with 2 removable, self powered
   ucom0: Prolific Technology Inc. USB-Serial Controller, rev 1.10/3.00, addr 2

I also get messages like this (which I didn't get with the earlier
ucom.c)

   ucom0: ucomreadcb: CANCELLED

This is what ppp.log says:


Oct 17 11:21:43 bluerondo ppp[664]: Phase: Using interface: tun0 
Oct 17 11:21:43 bluerondo ppp[664]: Phase: deflink: Created in closed state 
Oct 17 11:21:43 bluerondo ppp[664]: tun0: Command: default: ident user-ppp VERSION (built COMPILATIONDATE) 
Oct 17 11:21:43 bluerondo ppp[664]: tun0: Command: default: set device /dev/ucom0 
Oct 17 11:21:43 bluerondo ppp[664]: tun0: Command: default: set speed 115200 
Oct 17 11:21:43 bluerondo ppp[664]: tun0: Command: default: set dial ABORT BUSY ABORT NO\sCARRIER TIMEOUT 5            "" AT+CRM=1 OK-AT+CRM=1-OK ATDT\T TIMEOUT 40 CONNECT 
Oct 17 11:21:43 bluerondo ppp[664]: tun0: Command: default: set timeout 180 
Oct 17 11:21:43 bluerondo ppp[664]: tun0: Command: default: enable dns 
Oct 17 11:21:43 bluerondo ppp[664]: tun0: Phase: PPP Started (interactive mode). 
Oct 17 11:21:46 bluerondo ppp[664]: tun0: Command: /dev/tty: dial papchap 
Oct 17 11:21:46 bluerondo ppp[664]: tun0: Command: papchap: set phone ##7# 
Oct 17 11:21:46 bluerondo ppp[664]: tun0: Command: papchap: set authname internet 
Oct 17 11:21:46 bluerondo ppp[664]: tun0: Command: papchap: set authkey ******** 
Oct 17 11:21:46 bluerondo ppp[664]: tun0: Command: papchap: set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 
Oct 17 11:21:46 bluerondo ppp[664]: tun0: Command: papchap: add default HISADDR 
Oct 17 11:21:46 bluerondo ppp[664]: tun0: Phase: bundle: Establish 
Oct 17 11:21:46 bluerondo ppp[664]: tun0: Phase: deflink: closed -> opening 
Oct 17 11:21:46 bluerondo ppp[664]: tun0: Phase: deflink: Connected! 
Oct 17 11:21:46 bluerondo ppp[664]: tun0: Phase: deflink: opening -> dial 
Oct 17 11:21:46 bluerondo ppp[664]: tun0: Chat: Phone: ##7# 
Oct 17 11:21:46 bluerondo ppp[664]: tun0: Chat: deflink: Dial attempt 1 of 1 
Oct 17 11:21:46 bluerondo ppp[664]: tun0: Chat: Send: AT+CRM=1^M 
Oct 17 11:21:46 bluerondo ppp[664]: tun0: Chat: Expect(5): OK 
Oct 17 11:21:51 bluerondo ppp[664]: tun0: Chat: Expect timeout 
Oct 17 11:21:51 bluerondo ppp[664]: tun0: Chat: Send: AT+CRM=1^M 
Oct 17 11:21:51 bluerondo ppp[664]: tun0: Chat: Expect(5): OK 
Oct 17 11:21:56 bluerondo ppp[664]: tun0: Chat: Expect timeout 
Oct 17 11:21:56 bluerondo ppp[664]: tun0: Warning: Chat script failed 
Oct 17 11:21:56 bluerondo ppp[664]: tun0: Phase: deflink: dial -> hangup 
Oct 17 11:21:56 bluerondo ppp[664]: tun0: Warning: deflink: Unable to set physical to speed 0 
Oct 17 11:21:56 bluerondo ppp[664]: tun0: Phase: deflink: Disconnected! 
Oct 17 11:21:56 bluerondo ppp[664]: tun0: Warning: deflink: Unable to set physical to speed 0 
Oct 17 11:21:56 bluerondo ppp[664]: tun0: Phase: deflink: Connect time: 10 secs: 0 octets in, 0 octets out 
Oct 17 11:21:56 bluerondo ppp[664]: tun0: Phase: deflink: 0 packets in, 0 packets out 
Oct 17 11:21:56 bluerondo ppp[664]: tun0: Phase:  total 0 bytes/sec, peak 0 bytes/sec on Sun Oct 17 11:21:46 2004 
Oct 17 11:21:56 bluerondo ppp[664]: tun0: Phase: deflink: hangup -> closed 
Oct 17 11:21:56 bluerondo ppp[664]: tun0: Phase: bundle: Dead 



[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]