Happy Happy Joy Joy!

[Michael Powell <testuser@xxxxxxxxxxxxxxx>]

Justin C. Sherrill wrote:

[snip]
> 
> That may well be the case - I can't duplicate your errors here, so far - a
> "clean" effort using the instructions on the page works.
> 
> I did have a few typos in my instructions.  (listed /usr/local/ instead of
> /usr/local/etc in one spot, etc.)  They shouldn't have been fatal, though.
> Deleting /usr/src and pulling it in again should do the trick.

        I wiped the /usr/obj and /usr/src and started over. Initially it was
not successful so I tried removing /usr/include and did make installincludes.
Still no success, but another cvsup last night did the trick. I also removed the
march=k6-2 I had in make.conf (Don't if this affected things, or not). The kernel
was compiled from the exact same conf file in use on the FreeBSD box. There 
are some error message, particularly the: WARNING: "ad" is usurping "ad"'s cdevsw
is interesting. Time for me to study this new beast and learn more about it.  Below is
the dmesg if anyone is interested(unwrapped). Thanks guys! Keep up the good work :-)

DragonFly workstation.zip 1.0-CURRENT DragonFly 1.0-CURRENT #0: 
Tue Dec  2 22:44:40 EST 2003     root@xxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/dragon_01  i386

Dec  3 10:37:07 workstation /kernel: Copyright (c) 2003 The DragonFly Project.
Dec  3 10:37:07 workstation /kernel: Copyright (c) 1992-2003 The FreeBSD Project.
Dec  3 10:37:07 workstation /kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Dec  3 10:37:07 workstation /kernel: The Regents of the University of California. All rights reserved.
Dec  3 10:37:07 workstation /kernel: DragonFly 1.0-CURRENT #0: Tue Dec  2 22:44:40 EST 2003
Dec  3 10:37:07 workstation /kernel: root@xxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/dragon_01
Dec  3 10:37:07 workstation /kernel: Timecounter "i8254"  frequency 1193182 Hz
Dec  3 10:37:07 workstation /kernel: Timecounter "TSC"  frequency 451023740 Hz
Dec  3 10:37:07 workstation /kernel: CPU: AMD-K6(tm) 3D processor (451.02-MHz 586-class CPU)
Dec  3 10:37:07 workstation /kernel: Origin = "AuthenticAMD"  Id = 0x58c  Stepping = 12
Dec  3 10:37:07 workstation /kernel: Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
Dec  3 10:37:07 workstation /kernel: AMD Features=0x80000800<SYSCALL,3DNow!>
Dec  3 10:37:07 workstation /kernel: real memory  = 134217728 (131072K bytes)
Dec  3 10:37:07 workstation /kernel: avail memory = 124768256 (121844K bytes)
Dec  3 10:37:07 workstation /kernel: Preloaded elf kernel "/kernel" at 0xc0361000.
Dec  3 10:37:07 workstation /kernel: Preloaded userconfig_script "/boot/kernel.conf" at 0xc0361198.
Dec  3 10:37:07 workstation /kernel: netsmb_dev: loaded
Dec  3 10:37:07 workstation /kernel: K6-family MTRR support enabled (2 registers)
Dec  3 10:37:07 workstation /kernel: md0: Malloc disk
Dec  3 10:37:07 workstation /kernel: Using $PIR table, 5 entries at 0xc00f09b0
Dec  3 10:37:07 workstation /kernel: npx0: <math processor> on motherboard
Dec  3 10:37:07 workstation /kernel: npx0: INT 16 interface
Dec  3 10:37:07 workstation /kernel: pcib0: <Host to PCI bridge> on motherboard
Dec  3 10:37:07 workstation /kernel: pci0: <PCI bus> on pcib0
Dec  3 10:37:07 workstation /kernel: isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
Dec  3 10:37:07 workstation /kernel: isa0: <ISA bus> on isab0
Dec  3 10:37:07 workstation /kernel: atapci0: <Intel PIIX3 ATA controller> port 0xe800-0xe80f at device 7.1 on pci0
Dec  3 10:37:07 workstation /kernel: ata0: at 0x1f0 irq 14 on atapci0
Dec  3 10:37:07 workstation /kernel: installed MI handler for int 14
Dec  3 10:37:07 workstation /kernel: ata1: at 0x170 irq 15 on atapci0
Dec  3 10:37:07 workstation /kernel: installed MI handler for int 15
Dec  3 10:37:07 workstation /kernel: pci0: <NVidia Riva Ultra Vanta TNT2 graphics accelerator> at 9.0 irq 9
Dec  3 10:37:07 workstation /kernel: pci0: <unknown card> (vendor=0x127a, dev=0x1004) at 10.0 irq 12
Dec  3 10:37:07 workstation /kernel: xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xd800-0xd83f irq 10 at device 11.0 on pci0
Dec  3 10:37:07 workstation /kernel: installed MI handler for int 10
Dec  3 10:37:07 workstation /kernel: xl0: Ethernet address: 00:60:08:18:45:73
Dec  3 10:37:07 workstation /kernel: miibus0: <MII bus> on xl0
Dec  3 10:37:07 workstation /kernel: nsphy0: <DP83840 10/100 media interface> on miibus0
Dec  3 10:37:07 workstation /kernel: nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Dec  3 10:37:07 workstation /kernel: atapci1: <Promise ATA100 controller> port 0xb000-0xb03f,0xb400-0xb403,0xb800-0xb807,0xd000-0xd003,0xd400-0xd407 mem 0xe3000000-0xe301ffff irq 11 at device 12.0 on pci0
Dec  3 10:37:07 workstation /kernel: ata2: at 0xd400 on atapci1
Dec  3 10:37:07 workstation /kernel: installed MI handler for int 11
Dec  3 10:37:07 workstation /kernel: ata3: at 0xb800 on atapci1
Dec  3 10:37:07 workstation /kernel: orm0: <Option ROMs> at iomem 0xc0000-0xcafff,0xcc000-0xcdfff on isa0
Dec  3 10:37:07 workstation /kernel: fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
Dec  3 10:37:07 workstation /kernel: installed MI handler for int 6
Dec  3 10:37:07 workstation /kernel: fdc0: FIFO enabled, 8 bytes threshold
Dec  3 10:37:07 workstation /kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0
Dec  3 10:37:07 workstation /kernel: atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
Dec  3 10:37:07 workstation /kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
Dec  3 10:37:07 workstation /kernel: installed MI handler for int 1
Dec  3 10:37:07 workstation /kernel: sc0: <System console> at flags 0x100 on isa0
Dec  3 10:37:07 workstation /kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Dec  3 10:37:07 workstation /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
Dec  3 10:37:07 workstation /kernel: sio0: type 16550A
Dec  3 10:37:07 workstation /kernel: installed MI handler for int 4
Dec  3 10:37:07 workstation /kernel: sio1 at port 0x2f8-0x2ff irq 3 on isa0
Dec  3 10:37:07 workstation /kernel: sio1: type 16550A
Dec  3 10:37:07 workstation /kernel: installed MI handler for int 3
Dec  3 10:37:07 workstation /kernel: ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
Dec  3 10:37:07 workstation /kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
Dec  3 10:37:07 workstation /kernel: ppc0: FIFO with 16/16/16 bytes threshold
Dec  3 10:37:07 workstation /kernel: ppi0: <Parallel I/O> on ppbus0
Dec  3 10:37:07 workstation /kernel: lpt0: <Printer> on ppbus0
Dec  3 10:37:07 workstation /kernel: lpt0: Interrupt-driven port
Dec  3 10:37:07 workstation /kernel: installed MI handler for int 7
Dec  3 10:37:07 workstation /kernel: sbc1: <Creative ViBRA16C> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,5 on isa0
Dec  3 10:37:07 workstation /kernel: installed MI handler for int 5
Dec  3 10:37:07 workstation /kernel: pcm0: <SB16 DSP 4.13> on sbc1
Dec  3 10:37:07 workstation /kernel: installed MI handler for int 0
Dec  3 10:37:07 workstation /kernel: installed MI handler for int 8
Dec  3 10:37:07 workstation /kernel: ad4: 14669MB <WDC WD153BA> [29805/16/63] at ata2-master UDMA66
Dec  3 10:37:07 workstation /kernel: WARNING: "ad" is usurping "ad"'s cdevsw[]
Dec  3 10:37:07 workstation /kernel: ad5: 9536MB <Maxtor 5T010H1> [19376/16/63] at ata2-slave UDMA100
Dec  3 10:37:07 workstation /kernel: WARNING: "ad" is usurping "ad"'s cdevsw[]
Dec  3 10:37:07 workstation /kernel: ad6: 9536MB <Maxtor 5T010H1> [19376/16/63] at ata3-master UDMA100
Dec  3 10:37:07 workstation /kernel: acd0: CD-RW <SONY CD-RW CRX215E1> at ata0-master PIO4
Dec  3 10:37:07 workstation /kernel: Mounting root from ufs:/dev/ad6s1a
Dec  3 10:37:07 workstation /kernel: cd0 at ata0 bus 0 target 0 lun 0
Dec  3 10:37:07 workstation /kernel: cd0: <SONY CD-RW  CRX215E1 SYS2> Removable CD-ROM SCSI-0 device 
Dec  3 10:37:07 workstation /kernel: cd0: 16.000MB/s transfers
Dec  3 10:37:07 workstation /kernel: cd0: Attempt to query device size failed: NOT READY, Medium not present
Dec  3 10:37:08 workstation root: /etc/rc: INFO: ypserv depends on rpcbind, which will be forced to start.
Dec  3 10:37:08 workstation root: /etc/rc: WARNING: NIS domainname(1) is not set.
Dec  3 10:37:09 workstation lpd[308]: lpd startup: logging=0
Dec  3 10:38:12 workstation login: ROOT LOGIN (root) ON ttyv0
Dec  3 10:41:12 workstation shutdown: reboot by root:
Dec  3 10:41:14 workstation syslogd: exiting on signal 15

-Michael Powell