DragonFly bugs List (threaded) for 2008-01
[
Date Prev][
Date Next]
[
Thread Prev][
Thread Next]
[
Date Index][
Thread Index]
bpf_validate() needs to do more checks
OpenBSD's bpf_validate() in sys/net/bpf_filter.c does some additional
checks to catch:
BPF programs with no instructions or with more than BPF_MAXINSNS
instructions;
BPF_STX and BPF_LDX|BPF_MEM instructions that have out-of-range offsets
(which could be made to fetch or store into arbitrary memory locations);
BPF_DIV instructions with a constant 0 divisor (that's a check also done
at run time).
Here's a patch to make the DragonFly BSD bpf_validate() match it.
*** bpf_filter.c Tue Jan 1 18:57:43 2008
--- bpf_filter.c.VALIDATE Tue Jan 1 19:00:15 2008
***************
*** 498,505 ****
#ifdef _KERNEL
/*
* Return true if the 'fcode' is a valid filter program.
! * The constraints are that jump and memory accesses are within valid
! * ranges, and that the code terminates with either an accept or reject.
*
* The kernel needs to be able to verify an application's filter code.
* Otherwise, a bogus program could easily crash the system.
--- 498,508 ----
#ifdef _KERNEL
/*
* Return true if the 'fcode' is a valid filter program.
! * The constraints are that each jump be forward and to a valid
! * code, that memory accesses are within valid ranges (to the
! * extent that this can be checked statically; loads of packet
! * data have to be, and are, also checked at run time), and that
! * the code terminates with either an accept or reject.
*
* The kernel needs to be able to verify an application's filter code.
* Otherwise, a bogus program could easily crash the system.
***************
*** 507,544 ****
int
bpf_validate(const struct bpf_insn *f, int len)
{
! int i;
const struct bpf_insn *p;
for (i = 0; i < len; ++i) {
/*
! * Check that that jumps are within the code block.
*/
! p = &f[i];
! if (BPF_CLASS(p->code) == BPF_JMP) {
! int from = i + 1;
!
! if (BPF_OP(p->code) == BPF_JA) {
! if (from >= len || p->k >= len - from)
return 0;
}
! else if (from >= len || p->jt >= len - from ||
! p->jf >= len - from)
return 0;
! }
! /*
! * Check that memory operations use valid addresses.
! */
! if ((BPF_CLASS(p->code) == BPF_ST ||
! (BPF_CLASS(p->code) == BPF_LD &&
! (p->code & 0xe0) == BPF_MEM)) &&
! p->k >= BPF_MEMWORDS)
! return 0;
! /*
! * Check for constant division by 0.
! */
! if (p->code == (BPF_ALU|BPF_DIV|BPF_K) && p->k == 0)
return 0;
}
return BPF_CLASS(f[len - 1].code) == BPF_RET;
}
--- 510,620 ----
int
bpf_validate(const struct bpf_insn *f, int len)
{
! u_int i, from;
const struct bpf_insn *p;
+ if (len < 1 || len > BPF_MAXINSNS)
+ return 0;
+
for (i = 0; i < len; ++i) {
+ p = &f[i];
+ switch (BPF_CLASS(p->code)) {
/*
! * Check that memory operations use valid addresses.
*/
! case BPF_LD:
! case BPF_LDX:
! switch (BPF_MODE(p->code)) {
! case BPF_IMM:
! break;
! case BPF_ABS:
! case BPF_IND:
! case BPF_MSH:
! /*
! * More strict check with actual packet length
! * is done runtime.
! */
! if (p->k >= bpf_maxbufsize)
! return 0;
! break;
! case BPF_MEM:
! if (p->k >= BPF_MEMWORDS)
return 0;
+ break;
+ case BPF_LEN:
+ break;
+ default:
+ return 0;
}
! break;
! case BPF_ST:
! case BPF_STX:
! if (p->k >= BPF_MEMWORDS)
return 0;
! break;
! case BPF_ALU:
! switch (BPF_OP(p->code)) {
! case BPF_ADD:
! case BPF_SUB:
! case BPF_MUL:
! case BPF_OR:
! case BPF_AND:
! case BPF_LSH:
! case BPF_RSH:
! case BPF_NEG:
! break;
! case BPF_DIV:
! /*
! * Check for constant division by 0.
! */
! if (BPF_RVAL(p->code) == BPF_K && p->k == 0)
! return 0;
! break;
! default:
! return 0;
! }
! break;
! case BPF_JMP:
! /*
! * Check that jumps are within the code block,
! * and that unconditional branches don't go
! * backwards as a result of an overflow.
! * Unconditional branches have a 32-bit offset,
! * so they could overflow; we check to make
! * sure they don't. Conditional branches have
! * an 8-bit offset, and the from address is <=
! * BPF_MAXINSNS, and we assume that BPF_MAXINSNS
! * is sufficiently small that adding 255 to it
! * won't overflow.
! *
! * We know that len is <= BPF_MAXINSNS, and we
! * assume that BPF_MAXINSNS is < the maximum size
! * of a u_int, so that i + 1 doesn't overflow.
! */
! from = i + 1;
! switch (BPF_OP(p->code)) {
! case BPF_JA:
! if (from + p->k < from || from + p->k >= len)
! return 0;
! break;
! case BPF_JEQ:
! case BPF_JGT:
! case BPF_JGE:
! case BPF_JSET:
! if (from + p->jt >= len || from + p->jf >= len)
! return 0;
! break;
! default:
! return 0;
! }
! break;
! case BPF_RET:
! break;
! case BPF_MISC:
! break;
! default:
return 0;
+ }
}
return BPF_CLASS(f[len - 1].code) == BPF_RET;
}
[
Date Prev][
Date Next]
[
Thread Prev][
Thread Next]
[
Date Index][
Thread Index]