DragonFly BSD
DragonFly bugs List (threaded) for 2006-11
[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]

[issue168] Problem with ipw ...


From: John Leimon <issues@xxxxxxxxxxxxxxxxxxxxxx>
Date: Thu, 09 Nov 2006 02:14:55 -0000

John Leimon <jleimon@xxxxxxxxxxxxx> added the comment:

Just tried the latest (i think) daily devel snapshot ISO. The watchdog timeout 
issue persists when I run a 'dhclient xl0'. I've included a dmesg from the 
serial port on the laptop in dmesg.latitude.txt

----------
nosy: +johnvonelite
status: resolved -> chatting

_______________________________________________________
DragonFly issue tracker <issues@xxxxxxxxxxxxxxxxxxxxxx>
<http://bugs.dragonflybsd.org/issue168>
_______________________________________________________
dmesg from a Dell Latitude
Model Number: PP01L
C540/C640


ZDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD?
 3                                         3
 3                                         3
 3                                         3
 3          Welcome to DragonFly!          3 ,--,           |           ,--,
 3                                         3 |   `-,       ,^,       ,-'   |
 3                                         3  `,    `-,   (/ \)   ,-`    ,-'
 3  1. Boot DragonFly [default]            3    `-,    `-,/   \,-`    ,-`
 3  2. Boot DragonFly with ACPI disabled   3       `------(   )------'
 3  3. Boot DragonFly in Safe Mode         3   ,----------(   )-----------,
 3  4. Boot DragonFly in single user mode  3  |        _,-(   )-,_        |
 3  5. Boot DragonFly with verbose logging 3   `-,__,-`   \   /   `-,__,-'
 3  6. Escape to loader prompt             3               | |
 3  7. Reboot                              3               | |
 3                                         3               | |
 3                                         3               | |
 3                                         3               | |
 3                                         3               | |
 3  Select option, [Enter] for default     3               `|'
 3  or [Space] to pause timer  8           3
 @DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDY




Type '?' for a list of commands, 'help' for more detailed help.
OK boot -h
/modules/acpi.ko text=0x4790c data=0x188c+0xb38 syms=[0x4+0x6530+0x4+0x7ecf]
Copyright (c) 2003, 2004, 2005, 2006 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
DragonFly 1.7.0-DEVELOPMENT #0: Tue Nov  7 00:26:14 CET 2006
    root@xxxxxxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/GENERIC
TSC clock: 1993462100 Hz, i8254 clock: 1193140 Hz
CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz (1993.54-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7
  Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory  = 536748032 (524168K bytes)
avail memory = 509296640 (497360K bytes)
CCMSINIT
Preloaded elf kernel "/kernel" at 0xc0746000.
Preloaded elf module "/modules/acpi.ko" at 0xc07461cc.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00fbb90
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
acpi0: <DELL CPi R  > on motherboard
Warning: ACPI is disabling APM's device.  You can't run both
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU (2 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
legacypci0 on motherboard
pcib0: <Intel 82845 Host to PCI bridge> on legacypci0
pci0: <PCI bus> on pcib0
agp0: <Intel 82845 host to AGP bridge> mem 0xe8000000-0xebffffff at device 0.0 on pci0
pcib1: <Intel 82845 PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 4c57 graphics accelerator> at 0.0 irq 11
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xbf80-0xbf9f irq 11 atdevice 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec80-0xecff mem 0xf8fffc00-0xf8fffc7f irq 11 at device 0.0 on pci2
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: MAC address: 00:0b:db:d9:4b:09
cbb0: <TI1420 PCI-CardBus Bridge> at device 1.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pci_cfgintr: 0:30 INTC routed to irq 3
pcib2: routed slot 1 INTA to irq 3
cbb1: <TI1420 PCI-CardBus Bridge> at device 1.1 on pci2
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pci_cfgintr: 0:30 INTC routed to irq 3
pcib2: routed slot 1 INTA to irq 3
intr 11 at 50001 > 50000 hz, livelocked limit engaged!
isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0xbfa0-0xbfaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x2485) at 31.5 irq 11
pci0: <unknown card> (vendor=0x8086, dev=0x2486) at 31.6 irq 11
orm0: <Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xcf7ff,0xcf800-0xcffff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: can't drain, serial port might not exist, disabling
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
cardbus1: Resource not specified in CIS: id=10, size=1000
ohci0: <NEC uPD 9210 USB controller> mem 0x88002000-0x88002fff irq 3 at device 0.0 on cardbus1
usb1: OHCI version 15.15, legacy support
usb1: unsupported OHCI revision
ohci0: USB init failed
device_probe_and_attach: ohci0 attach returned 5
cardbus1: Resource not specified in CIS: id=10, size=1000
ohci0: <NEC uPD 9210 USB controller> mem 0x88002000-0x88002fff irq 3 at device 0.1 on cardbus1
usb1: OHCI version 15.15, legacy support
usb1: unsupported OHCI revision
ohci0: USB init failed
device_probe_and_attach: ohci0 attach returned 5
cardbus1: Resource not specified in CIS: id=10, size=100
cardbus1: <unknown card> (vendor=0x1033, dev=0x00e0) at 0.2 irq 3
cbb1: CardBus card activation failed
ad0: 57231MB <HTS541060G9AT00> [116280/16/63] at ata0-master UDMA100
acd0: CDROM <SAMSUNG CD-ROM SN-124> at ata1-master PIO4
Mounting root from cd9660:/dev/acd0a
cd0 at ata1 bus 0 target 0 lun 0
cd0: <SAMSUNG CD-ROM SN-124 N102> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: cd present [117936 x 2048 byte records]
cd9660: RockRidge Extension
intr 11 at 7376 < 20000 hz, livelock removed
Loading configuration files.
. 
kern.seedenable: 0 -> 1
kern.seedenable: 1 -> 0
Starting file system checks:
cd9660: /dev/acd0a: Invalid argument

Setting hostname: .
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet 127.0.0.1 netmask 0xff000000
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
Additional routing options:.
Mounting NFS file systems:.
Building databases...
NFS CLIENT: nfsiod access_cache_timeout=5 neg_cache_timeout=3
ELF ldconfig path: /usr/lib /usr/lib/gcc34 /usr/lib/gcc40 /usr/lib/gcc41 /usr/lib/compat /usr/local/lib
Starting local daemons:.
Updating motd.
Configuring syscons: blanktime.
Generating public/private rsa1 key pair.
Your identification has been saved in /etc/ssh/ssh_host_key.
Your public key has been saved in /etc/ssh/ssh_host_key.pub.
The key fingerprint is:
e2:b6:a9:22:44:f1:42:ed:a7:81:68:e9:88:af:db:c6 root@
Generating public/private dsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_dsa_key.
Your public key has been saved in /etc/ssh/ssh_host_dsa_key.pub.
The key fingerprint is:
5e:e4:a1:2b:7c:4d:91:ff:19:70:a7:fd:8e:3f:85:13 root@
Generating public/private rsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_rsa_key.
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub.
The key fingerprint is:
65:37:0f:46:a1:b6:cd:9e:d9:27:16:32:df:23:42:5d root@
Starting sshd.
Initial i386 initialization:.
Additional ABI support:.
Local package initialization:.
Additional TCP options:.
Starting pfi...
Looking for pfi.conf on /dev/acd0c...mount_cd9660: /dev/acd0c: Device busy
 not found
Looking for pfi.conf on /dev/da0s1...mount_msdos: /dev/da0s1: Device not configured
 not found
Looking for pfi.conf on /dev/da1s1...mount_msdos: /dev/da1s1: Device not configured
 not found
Looking for pfi.conf on /dev/fd0...fd0: recal failed ST0 70<abnrml,seek_cmplt,equ_chck> cyl 0
fd0: recal failed ST0 70<abnrml,seek_cmplt,equ_chck> cyl 0
fd0: recal failed ST0 70<abnrml,seek_cmplt,equ_chck> cyl 0
fd0: recal failed ST0 70<abnrml,seek_cmplt,equ_chck> cyl 0
fd0c: hard error reading offset 000000000000 for 2048 (No status)
mount_msdos: /dev/fd0: Input/output error
 not found
Looking for pfi.conf on /dev/fd1...mount_msdos: /dev/fd1: Device not configured
 not found

Wed Nov  8 19:48:38 GMT 2006
intr 3 at 50001 > 50000 hz, livelocked limit engaged!
intr 3 at 15913 < 20000 hz, livelock removed
intr 3 at 50001 > 50000 hz, livelocked limit engaged!
intr 3 at 14018 < 20000 hz, livelock removed
intr 3 at 50001 > 50000 hz, livelocked limit engaged!
xl0: watchdog timeout
intr 3 at 13850 < 20000 hz, livelock removed
intr 3 at 50001 > 50000 hz, livelocked limit engaged!
intr 3 at 15971 < 20000 hz, livelock removed
intr 3 at 50001 > 50000 hz, livelocked limit engaged!
intr 3 at 14777 < 20000 hz, livelock removed
intr 3 at 50001 > 50000 hz, livelocked limit engaged!
intr 3 at 14334 < 20000 hz, livelock removed
intr 3 at 50001 > 50000 hz, livelocked limit engaged!
xl0: watchdog timeout
intr 3 at 13755 < 20000 hz, livelock removed
intr 3 at 50001 > 50000 hz, livelocked limit engaged!
intr 3 at 13527 < 20000 hz, livelock removed
intr 3 at 50001 > 50000 hz, livelocked limit engaged!
xl0: watchdog timeout
intr 3 at 12879 < 20000 hz, livelock removed
intr 3 at 50001 > 50000 hz, livelocked limit engaged!
intr 3 at 13748 < 20000 hz, livelock removed
intr 3 at 50001 > 50000 hz, livelocked limit engaged!
xl0: watchdog timeout
intr 3 at 7370 < 20000 hz, livelock removed
intr 3 at 50001 > 50000 hz, livelocked limit engaged!
intr 3 at 14753 < 20000 hz, livelock removed
intr 3 at 50001 > 50000 hz, livelocked limit engaged!
xl0: watchdog timeout
intr 3 at 7398 < 20000 hz, livelock removed
intr 3 at 50001 > 50000 hz, livelocked limit engaged!
intr 3 at 15205 < 20000 hz, livelock removed
intr 3 at 50001 > 50000 hz, livelocked limit engaged!
intr 3 at 14482 < 20000 hz, livelock removed
intr 3 at 50001 > 50000 hz, livelocked limit engaged!
xl0: watchdog timeout
intr 3 at 16208 < 20000 hz, livelock removed
intr 3 at 50001 > 50000 hz, livelocked limit engaged!
xl0: watchdog timeout
intr 3 at 12552 < 20000 hz, livelock removed
intr 3 at 50001 > 50000 hz, livelocked limit engaged!
intr 3 at 14795 < 20000 hz, livelock removed
intr 3 at 50001 > 50000 hz, livelocked limit engaged!
intr 3 at 17980 < 20000 hz, livelock removed
intr 3 at 50001 > 50000 hz, livelocked limit engaged!
xl0: watchdog timeout
intr 3 at 7399 < 20000 hz, livelock removed
intr 3 at 50001 > 50000 hz, livelocked limit engaged!
                                                               


[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]