DragonFly bugs List (threaded) for 2006-05
[
Date Prev][
Date Next]
[
Thread Prev][
Thread Next]
[
Date Index][
Thread Index]
Fwd: Problem with ipw ...
Dear all,
A few days ago I wanted to try Sephe's 80211 patch to get wpa
working under DF. However, I can't load the firmware (neither with
nor without the patch). After ipwcontrol and ifconfig I get the
following error messages:
intr 5 at 50001 > 50000 hz, livelocked limit engaged!
ipw0: timeout waiting for firmware initialization to complete
ipw0: could not load firmware
intr 5 at 7399 < 20000 hz, livelock removed
ACPI turned on or off doesn't seem to make a difference.
I attached a verbose dmesg and vmstat -i before and after
ipwcontrol ipw0 -f....
and after
ifconfig ipw0 inet ... netmask ...
Best regards,
Mathias
PS: wep worked under FBSD60 and under WinXP
interrupt total rate
clk 160353 612
atkbd0 1764 6
sio0 0 0
uhci1/uhci2/ehci0/cbb0 70514 269
ppc0 3 0
uhci0/fwohci0/re0/ichsmb0/pcm0 270 1
ipw0 0 0
psm0 1116 4
ata0 981 3
ata1 44 0
irq19 68 0
swi_siopoll 0 0
swi_crypto/swi_camnet 0 0
swi_cambio 0 0
swi_vm 0 0
swi_taskq 0 0
Total 235113 897
interrupt total rate
clk 48030 216
atkbd0 1586 7
sio0 0 0
uhci1/uhci2/ehci0/cbb0 0 0
ppc0 0 0
uhci0/fwohci0/re0/ichsmb0/pcm0 223 1
ipw0 0 0
psm0 1116 5
ata0 953 4
ata1 44 0
irq19 68 0
swi_siopoll 0 0
swi_crypto/swi_camnet 0 0
swi_cambio 0 0
swi_vm 0 0
swi_taskq 0 0
Total 52020 234
interrupt total rate
clk 34136 212
atkbd0 1346 8
sio0 0 0
uhci1/uhci2/ehci0/cbb0 0 0
ppc0 0 0
uhci0/fwohci0/re0/ichsmb0/pcm0 173 1
ipw0 0 0
psm0 0 0
ata0 879 5
ata1 44 0
irq19 68 0
swi_siopoll 0 0
swi_crypto/swi_camnet 0 0
swi_cambio 0 0
swi_vm 0 0
swi_taskq 0 0
Total 36646 227
Copyright (c) 2003, 2004, 2005, 2006 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly 1.5.3-PREVIEW #10: Thu May 4 10:00:29 CEST 2006
root@xxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/KERN_1.5_wpa
Calibrating clock(s) ... TSC clock: 1495134891 Hz, i8254 clock: 1193171 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Intel(R) Pentium(R) M processor 1500MHz (1495.15-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x695 Stepping = 5
Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
real memory = 1073545216 (1048384K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00577000 - 0x3ffbffff, 1067749376 bytes (260681 pages)
avail memory = 1033318400 (1009100K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fa000
bios32: Entry = 0xf0000 (c00f0000) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x31f
pnpbios: Found PnP BIOS data at 0xc00f45c0
pnpbios: Entry = f0000:45ee Rev = 1.0
pnpbios: Event flag at f45e6
pnpbios: OEM ID 6008110e
Other BIOS signatures found:
Preloaded elf kernel "/kernel" at 0xc054a000.
Leaving critical section, allowing interrupts
wlan: <802.11 Link Layer>
crypto: <crypto core>
VESA: information block
56 45 53 41 00 02 00 01 00 01 01 00 00 00 22 00
00 01 00 04 00 01 19 01 00 01 2f 01 00 01 34 01
00 01 82 01 0d 01 0e 01 0f 01 20 01 92 01 93 01
94 01 95 01 96 01 a2 01 a3 01 a4 01 a5 01 a6 01
VESA: 60 mode(s) found
VESA: v2.0, 65536k memory, flags:0x1, mode table:0xc04b0682 (1000022)
VESA: ATI MOBILITY RADEON 9200
VESA: ATI Technologies Inc. M9 01.00
Pentium Pro MTRR support enabled
md0: Malloc disk
pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=33408086)
pcibios: BIOS version 2.10
npx0.nexus0.root0
npx0: <math processor> [tentative] on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
npx0: <math processor> [attached!] on motherboard
legacypci0.nexus0.root0
legacypci0 [tentative] on motherboard
pcib0.legacypci0.nexus0.root0
pcib0: <Host to PCI bridge> [tentative] on legacypci0
pci0.pcib0.legacypci0.nexus0.root0
pci0: <PCI bus> [tentative] on pcib0
pci0: pci_attach() physical bus=0
map[10]: type 1, range 32, base b0000000, size 28
found-> vendor=0x8086, dev=0x3340, revid=0x03
bus=0, slot=0, func=0
class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x3341, revid=0x03
bus=0, slot=1, func=0
class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
map[20]: type 1, range 32, base 000048c0, size 5
found-> vendor=0x8086, dev=0x24c2, revid=0x01
bus=0, slot=29, func=0
class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[20]: type 1, range 32, base 000048e0, size 5
found-> vendor=0x8086, dev=0x24c4, revid=0x01
bus=0, slot=29, func=1
class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=5
map[20]: type 1, range 32, base 00004c00, size 5
found-> vendor=0x8086, dev=0x24c7, revid=0x01
bus=0, slot=29, func=2
class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=c, irq=5
map[10]: type 1, range 32, base a0000000, size 10
found-> vendor=0x8086, dev=0x24cd, revid=0x01
bus=0, slot=29, func=7
class=[SERIALBUS]0c-03-20, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=5
found-> vendor=0x8086, dev=0x2448, revid=0x81
bus=0, slot=30, func=0
class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=3 secondarybus=2
found-> vendor=0x8086, dev=0x24cc, revid=0x01
bus=0, slot=31, func=0
class=[BRIDGE]06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base 00000000, size 3
map[14]: type 1, range 32, base 00000000, size 2
map[18]: type 1, range 32, base 00000000, size 3
map[1c]: type 1, range 32, base 00000000, size 2
map[20]: type 1, range 32, base 00004c40, size 4
found-> vendor=0x8086, dev=0x24ca, revid=0x01
bus=0, slot=31, func=1
class=[STORAGE]01-01-8a, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[20]: type 1, range 32, base 00004c20, size 5
found-> vendor=0x8086, dev=0x24c3, revid=0x01
bus=0, slot=31, func=3
class=[SERIALBUS]0c-05-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=10
map[10]: type 1, range 32, base 00004000, size 8
map[14]: type 1, range 32, base 00004880, size 6
map[18]: type 1, range 32, base a0200000, size 9
map[1c]: type 1, range 32, base a0300000, size 8
found-> vendor=0x8086, dev=0x24c5, revid=0x01
bus=0, slot=31, func=5
class=[MULTIMEDIA]04-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=10
map[10]: type 1, range 32, base 00004400, size 8
map[14]: type 1, range 32, base 00004800, size 7
found-> vendor=0x8086, dev=0x24c6, revid=0x01
bus=0, slot=31, func=6
class=[SIMPLECOMM]07-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=10
agp0.pci0.pcib0.legacypci0.nexus0.root0
agp0: <Intel 82855 host to AGP bridge> [tentative] mem 0xb0000000-0xbfffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 256M
agp0: <Intel 82855 host to AGP bridge> [attached!] mem 0xb0000000-0xbfffffff at device 0.0 on pci0
pcib1.pci0.pcib0.legacypci0.nexus0.root0
pcib1: <PCI to PCI bridge (vendor=8086 device=3341)> [tentative] at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x3000-0x3fff
pcib1: memory decode 0x90400000-0x904fffff
pcib1: prefetched decode 0x98000000-0x9fffffff
pci1.pcib1.pci0.pcib0.legacypci0.nexus0.root0
pci1: <PCI bus> [tentative] on pcib1
pci1: pci_attach() physical bus=1
map[10]: type 1, range 32, base 98000000, size 27
map[14]: type 1, range 32, base 00003000, size 8
map[18]: type 1, range 32, base 90400000, size 16
found-> vendor=0x1002, dev=0x4c66, revid=0x01
bus=1, slot=0, func=0
class=[DISPLAY]03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
pci1: <ATI model 4c66 graphics accelerator> (vendor=0x1002, dev=0x4c66) at 0.0 irq 10
pci1: <PCI bus> [attached!] on pcib1
pcib1: <PCI to PCI bridge (vendor=8086 device=3341)> [attached!] at device 1.0 on pci0
uhci0.pci0.pcib0.legacypci0.nexus0.root0
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> [tentative] port 0x48c0-0x48df irq 10 at device 29.0 on pci0
usb0.uhci0.pci0.pcib0.legacypci0.nexus0.root0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> [tentative] on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
usb0: <Intel 82801DB (ICH4) USB controller USB-A> [attached!] on uhci0
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> [attached!] port 0x48c0-0x48df irq 10 at device 29.0 on pci0
uhci1.pci0.pcib0.legacypci0.nexus0.root0
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> [tentative] port 0x48e0-0x48ff irq 5 at device 29.1 on pci0
usb1.uhci1.pci0.pcib0.legacypci0.nexus0.root0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> [tentative] on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
usb1: <Intel 82801DB (ICH4) USB controller USB-B> [attached!] on uhci1
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> [attached!] port 0x48e0-0x48ff irq 5 at device 29.1 on pci0
uhci2.pci0.pcib0.legacypci0.nexus0.root0
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> [tentative] port 0x4c00-0x4c1f irq 5 at device 29.2 on pci0
usb2.uhci2.pci0.pcib0.legacypci0.nexus0.root0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> [tentative] on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
usb2: <Intel 82801DB (ICH4) USB controller USB-C> [attached!] on uhci2
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> [attached!] port 0x4c00-0x4c1f irq 5 at device 29.2 on pci0
ehci0.pci0.pcib0.legacypci0.nexus0.root0
ehci0: <Intel 82801DB/L/M USB 2.0 controller> [tentative] mem 0xa0000000-0xa00003ff irq 5 at device 29.7 on pci0
ehci0: (New EHCI DeviceId=0x24cd8086)
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
ehci_pci_attach: companion usb2
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3.ehci0.pci0.pcib0.legacypci0.nexus0.root0
usb3: <Intel 82801DB/L/M USB 2.0 controller> [tentative] on ehci0
usb3: USB revision 2.0
uhub3: (0x8086) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
usb3: <Intel 82801DB/L/M USB 2.0 controller> [attached!] on ehci0
ehci0: <Intel 82801DB/L/M USB 2.0 controller> [attached!] mem 0xa0000000-0xa00003ff irq 5 at device 29.7 on pci0
pcib2.pci0.pcib0.legacypci0.nexus0.root0
pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> [tentative] at device 30.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 3
pcib2: I/O decode 0x2000-0x2fff
pcib2: memory decode 0x90000000-0x903fffff
pcib2: prefetched decode 0xfff00000-0xfffff
pcib2: Subtractively decoded bridge.
pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
pci2: <PCI bus> [tentative] on pcib2
pci2: pci_attach() physical bus=2
map[10]: type 1, range 32, base 90200000, size 11
map[14]: type 1, range 32, base 00002400, size 7
found-> vendor=0x1106, dev=0x3044, revid=0x80
bus=2, slot=0, func=0
class=[SERIALBUS]0c-00-10, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base 00002000, size 8
map[14]: type 1, range 32, base 90300000, size 8
found-> vendor=0x10ec, dev=0x8139, revid=0x20
bus=2, slot=1, func=0
class=[NETWORK]02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base 90000000, size 12
found-> vendor=0x8086, dev=0x1043, revid=0x04
bus=2, slot=2, func=0
class=[NETWORK]02-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 90100000, size 12
found-> vendor=0x1524, dev=0x1410, revid=0x00
bus=2, slot=4, func=0
class=[BRIDGE]06-07-00, hdrtype=0x02, mfdev=0
subordinatebus=3 secondarybus=3
intpin=a, irq=5
fwohci0.pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
fwohci0: <VIA Fire II (VT6306)> [tentative] port 0x2400-0x247f mem 0x90200000-0x902007ff irq 10 at device 0.0 on pci2
fwohci0: latency timer 128 -> 128.
fwohci0: cache size 8 -> 8.
pcib2: device fwohci0 requested decoded memory range 0x90200000-0x902007ff
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:02:3f:37:38:00:dc:3e
fwohci0: resetting OHCI...done (loop=0)
fwohci0: fwphy_rddata: 0x2 loop=1, retry=0
fwohci0: fwphy_rddata: 0x3 loop=1, retry=0
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: fwphy_rddata: 0x5 loop=1, retry=0
fwohci0: Enable 1394a Enhancements
fwohci0: fwphy_rddata: 0x5 loop=1, retry=0
fwohci0: fwphy_rddata: 0x2 loop=1, retry=0
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
fwohci0: Link S400, max_rec 2048 bytes.
fwohci0: BUS_OPT 0xf800a202 -> 0xf800a202
fwohci0: fwohci_set_intr: 1
firewire0.fwohci0.pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
firewire0: <IEEE1394(FireWire) bus> [tentative] on fwohci0
sbp0.firewire0.fwohci0.pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
sbp0: <SBP-2/SCSI over FireWire> [tentative] on firewire0
sbp_attach (cold=1)
sbp0: <SBP-2/SCSI over FireWire> [attached!] on firewire0
sbp_post_busreset
fwohci0: Initiate bus reset
fwohci0: fwphy_rddata: 0x1 loop=1, retry=0
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
fwohci0: fw_set_bus_manager: 0->0 (loop=0)
firewire0: bus manager 0 (me)
send phy_config root_node=-1 gap_count=5
fwohci0: maxdesc: 2
fwohci0: start AT DMA status=0
Current DB 0
ch = 0
Current OP KEY INT BR len Addr Depend Stat: Cnt
3ebd7000 OUTL ST2 ALL ALL 12 00000000 3ebd7080 8411:0007 RUN,ACTIVE, ack complete(11)
0x000000e0 0x00450000 0xffbaffff 0x00000000
fwohci0: fwphy_rddata: 0x1 loop=1, retry=0
firewire0: <IEEE1394(FireWire) bus> [attached!] on fwohci0
fwohci0: <VIA Fire II (VT6306)> [attached!] port 0x2400-0x247f mem 0x90200000-0x902007ff irq 10 at device 0.0 on pci2
pcib2: device re0 requested decoded I/O range 0x2000-0x20ff
re0.pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
re0: <RealTek 8139C+ 10/100BaseTX> [tentative] port 0x2000-0x20ff mem 0x90300000-0x903000ff irq 10 at device 1.0 on pci2
pcib2: device re0 requested decoded I/O range 0x2000-0x20ff
miibus0.re0.pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
miibus0: <MII bus> [tentative] on re0
ukphy0.miibus0.re0.pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
ukphy0: <Generic IEEE 802.3u media interface> [tentative] on miibus0
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ukphy0: <Generic IEEE 802.3u media interface> [attached!] on miibus0
miibus0: <MII bus> [attached!] on re0
re0: bpf attached
re0: MAC address: 00:02:3f:64:75:99
re0: <RealTek 8139C+ 10/100BaseTX> [attached!] port 0x2000-0x20ff mem 0x90300000-0x903000ff irq 10 at device 1.0 on pci2
ipw0.pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
ipw0: <Intel(R) PRO/Wireless 2100 MiniPCI> [tentative] mem 0x90000000-0x90000fff irq 11 at device 2.0 on pci2
pcib2: device ipw0 requested decoded memory range 0x90000000-0x90000fff
ipw0: bpf attached
ipw0: MAC address: 00:04:23:62:75:53
ipw0: bpf attached
ipw0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ipw0: bpf attached
ipw0: <Intel(R) PRO/Wireless 2100 MiniPCI> [attached!] mem 0x90000000-0x90000fff irq 11 at device 2.0 on pci2
cbb0.pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
cbb0: <ENE CB1410 PCI-CardBus Bridge> [tentative] mem 0x90100000-0x90100fff irq 5 at device 4.0 on pci2
pcib2: device cbb0 requested decoded memory range 0x90100000-0x90100fff
cardbus0.cbb0.pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
cardbus0: <CardBus bus> [tentative] on cbb0
cardbus0: <CardBus bus> [attached!] on cbb0
pccard0.cbb0.pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
pccard0: <16-bit PCCard bus> [tentative] on cbb0
pccard0: <16-bit PCCard bus> [attached!] on cbb0
cbb0: PCI Configuration space:
0x00: 0x14101524 0x02100007 0x06070000 0x00028008
0x10: 0x90100000 0x020000a0 0x20030302 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x07440105
0x40: 0x08600e11 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x0044d020 0x00000000 0x00000000 0x001c1112
0x90: 0x60440280 0x00000000 0x00000000 0x00000000
0xa0: 0xfe010001 0x00c00000 0x00008006 0x00000009
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00001000 0x00800080 0x10080400 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
cbb0: <ENE CB1410 PCI-CardBus Bridge> [attached!] mem 0x90100000-0x90100fff irq 5 at device 4.0 on pci2
pci2: <PCI bus> [attached!] on pcib2
pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> [attached!] at device 30.0 on pci0
isab0.pci0.pcib0.legacypci0.nexus0.root0
isab0: <PCI to ISA bridge (vendor=8086 device=24cc)> [tentative] at device 31.0 on pci0
isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
isa0: <ISA bus> [tentative] on isab0
isa0: <ISA bus> [attached!] on isab0
isab0: <PCI to ISA bridge (vendor=8086 device=24cc)> [attached!] at device 31.0 on pci0
atapci0.pci0.pcib0.legacypci0.nexus0.root0
atapci0: <Intel ICH4 ATA100 controller> [tentative] port 0x4c40-0x4c4f,0-0x3,0-0x7,0-0x3,0-0x7 irq 5 at device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x4c40
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata0 [tentative]: at 0x1f0 irq 14 on atapci0
ata0 [attached!]: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x4c48
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 00 00
ata1: mask=03 stat0=00 stat1=00
ata1: devices=04
ata1.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata1 [tentative]: at 0x170 irq 15 on atapci0
ata1 [attached!]: at 0x170 irq 15 on atapci0
atapci0: <Intel ICH4 ATA100 controller> [attached!] port 0x4c40-0x4c4f,0-0x3,0-0x7,0-0x3,0-0x7 irq 5 at device 31.1 on pci0
ichsmb0.pci0.pcib0.legacypci0.nexus0.root0
ichsmb0: <Intel 82801DC (ICH4) SMBus controller> [tentative] port 0x4c20-0x4c3f irq 10 at device 31.3 on pci0
smbus0.ichsmb0.pci0.pcib0.legacypci0.nexus0.root0
smbus0: <System Management Bus> [tentative] on ichsmb0
smb0.smbus0.ichsmb0.pci0.pcib0.legacypci0.nexus0.root0
smb0: <SMBus general purpose I/O> [tentative] on smbus0
smb0: <SMBus general purpose I/O> [attached!] on smbus0
smbus0: <System Management Bus> [attached!] on ichsmb0
ichsmb0: <Intel 82801DC (ICH4) SMBus controller> [attached!] port 0x4c20-0x4c3f irq 10 at device 31.3 on pci0
pcm0.pci0.pcib0.legacypci0.nexus0.root0
pcm0: <Intel ICH4 (82801DB)> [tentative] port 0x4880-0x48bf,0x4000-0x40ff mem 0xa0300000-0xa03000ff,0xa0200000-0xa02001ff irq 10 at device 31.5 on pci0
pcm0: <Analog Devices AD1981B AC97 Codec (id = 0x41445374)>
pcm0: Codec features headphone, 20 bit DAC, 5 bit master volume, no 3D Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, reserved 1, AMAP, reserved 4
pcm0: sndbuf_setmap 45000, 4000; 0xe2b18000 -> 45000
pcm0: sndbuf_setmap 49000, 4000; 0xe2b80000 -> 49000
pcm0: <Intel ICH4 (82801DB)> [attached!] port 0x4880-0x48bf,0x4000-0x40ff mem 0xa0300000-0xa03000ff,0xa0200000-0xa02001ff irq 10 at device 31.5 on pci0
pci0: <unknown card> (vendor=0x8086, dev=0x24c6) at 31.6 irq 10
pci0: <PCI bus> [attached!] on pcib0
pcib0: <Host to PCI bridge> [attached!] on legacypci0
legacypci0 [attached!] on motherboard
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
pnpbios: 15 devices, largest 250 bytes
pnp_get_devnode cd=0 nxt=2 size=29 handle=1 devid=040cd041 type=0b8000, attrib=0003
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
PNP0c04: adding irq mask 0x2000
pnpbios: handle 1 device ID PNP0c04 (040cd041)
pnp_get_devnode cd=2 nxt=3 size=54 handle=2 devid=010cd041 type=050000, attrib=0003
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xe0000-0xfffff, size=0x20000
PNP0c01: adding fixed memory32 range 0x100000-0x3fffffff, size=0x3ff00000
pnpbios: handle 2 device ID PNP0c01 (010cd041)
pnp_get_devnode cd=3 nxt=4 size=26 handle=3 devid=030ad041 type=060400, attrib=0003
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
pnpbios: handle 3 device ID PNP0a03 (030ad041)
pnp_get_devnode cd=4 nxt=5 size=37 handle=4 devid=0000d041 type=080001, attrib=0003
pnp_get_devnode cd=5 nxt=6 size=45 handle=5 devid=0002d041 type=080101, attrib=0003
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x80-0x8f, size=0x10, align=0
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
PNP0200: adding dma mask 0x10
pnpbios: handle 5 device ID PNP0200 (0002d041)
pnp_get_devnode cd=6 nxt=7 size=29 handle=6 devid=0001d041 type=080201, attrib=0003
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
PNP0100: adding irq mask 0x1
pnpbios: handle 6 device ID PNP0100 (0001d041)
pnp_get_devnode cd=7 nxt=8 size=26 handle=7 devid=0008d041 type=088000, attrib=0003
PNP0800: adding io range 0x61-0x61, size=0x1, align=0
pnpbios: handle 7 device ID PNP0800 (0008d041)
pnp_get_devnode cd=8 nxt=9 size=45 handle=8 devid=000bd041 type=080301, attrib=0003
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
PNP0b00: adding io range 0x72-0x72, size=0x1, align=0
PNP0b00: adding io range 0x73-0x73, size=0x1, align=0
PNP0b00: adding irq mask 0x100
pnpbios: handle 8 device ID PNP0b00 (000bd041)
pnp_get_devnode cd=9 nxt=10 size=37 handle=9 devid=0303d041 type=090000, attrib=000b
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
PNP0303: adding irq mask 0x2
pnpbios: handle 9 device ID PNP0303 (0303d041)
pnp_get_devnode cd=10 nxt=11 size=26 handle=10 devid=130fd041 type=090200, attrib=000b
PNP0f13: adding irq mask 0x1000
pnpbios: handle 10 device ID PNP0f13 (130fd041)
pnp_get_devnode cd=11 nxt=12 size=250 handle=11 devid=0104d041 type=070102, attrib=0080
PNP0401: adding irq mask 0x80
PNP0401: adding dma mask 0x2
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0
PNP0401: adding io range 0x778-0x77a, size=0x3, align=0
pnpbios: handle 11 device ID PNP0401 (0104d041)
pnp_get_devnode cd=12 nxt=13 size=83 handle=12 devid=0105d041 type=070002, attrib=0080
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
PNP0501: adding irq mask 0x8
pnpbios: handle 12 device ID PNP0501 (0105d041)
pnp_get_devnode cd=13 nxt=15 size=138 handle=13 devid=10f0a34d type=070002, attrib=0080
SMCf010: adding io range 0x3e8-0x3ef, size=0x8, align=0
SMCf010: adding io range 0x3e8-0x3ef, size=0x8, align=0x8
SMCf010: adding irq mask 0x8
SMCf010: adding dma mask 0x8
pnpbios: handle 13 device ID SMCf010 (10f0a34d)
pnp_get_devnode cd=15 nxt=16 size=39 handle=15 devid=030ed041 type=060500, attrib=0182
PNP0e03: adding io range 0x3e0-0x3e1, size=0x2, align=0
pnpbios: handle 15 device ID PNP0e03 (030ed041)
pnp_get_devnode cd=16 nxt=255 size=154 handle=16 devid=020cd041 type=0b0200, attrib=0003
PNP0c02: adding fixed memory32 range 0xfff0000-0x100effff, size=0x100000
PNP0c02: adding fixed memory32 range 0xffb0000-0x100b03ff, size=0x100400
PNP0c02: adding io range 0x10-0x1f, size=0x10, align=0
PNP0c02: adding io range 0x24-0x3f, size=0x1c, align=0
PNP0c02: adding io range 0x4e-0x4f, size=0x2, align=0
PNP0c02: adding io range 0x50-0x53, size=0x4, align=0
PNP0c02: adding io range 0x68-0x6f, size=0x8, align=0
PNP0c02: adding io range 0x74-0x77, size=0x4, align=0
PNP0c02: adding io range 0x92-0x92, size=0x1, align=0
PNP0c02: adding io range 0x93-0x9f, size=0xd, align=0
PNP0c02: adding io range 0xa4-0xbd, size=0x1a, align=0
PNP0c02: adding io range 0x140-0x14f, size=0x10, align=0
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0c02: adding io range 0x1000-0x107f, size=0x80, align=0
PNP0c02: adding io range 0x1100-0x112f, size=0x30, align=0
PNP0c02: adding io range 0x1200-0x121f, size=0x20, align=0
pnpbios: handle 16 device ID PNP0c02 (020cd041)
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
orm0: <Option ROM> [tentative] at iomem 0xc0000-0xcffff on isa0
orm0: <Option ROM> [attached!] at iomem 0xc0000-0xcffff on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 [tentative] failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ata2 [tentative] failed to probe at port 0x1f0 irq 14 on isa0
ata3 [tentative] failed to probe at port 0x170 irq 15 on isa0
atkbdc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
atkbdc0: <Keyboard controller (i8042)> [tentative] at port 0x60,0x64 on isa0
atkbd0.atkbdc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
atkbd0: <AT Keyboard> [tentative] flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
atkbd0: <AT Keyboard> [attached!] flags 0x1 irq 1 on atkbdc0
psm0: current command byte:0065
psm0.atkbdc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
psm0: <PS/2 Mouse> [tentative] irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00006000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
psm0: <PS/2 Mouse> [attached!] irq 12 on atkbdc0
atkbdc0: <Keyboard controller (i8042)> [attached!] at port 0x60,0x64 on isa0
vga0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 67 4f 4f 8b 54 9c
9e 1f 00 4f 0d 0e 00 00 07 80 90 83 8f 28 1f 8f
9f a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 67 4f 4f 8b 54 9c
9e 1f 00 4f 0d 0e 00 00 07 80 90 83 8f 28 1f 8f
9f a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
sc0: <System console> [tentative] at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sc0: <System console> [attached!] at flags 0x100 on isa0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
sio0 [tentative] at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio0 [attached!] at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
ppc0: <Parallel port> [tentative] at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0.ppc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
ppbus0: <Parallel port bus> [tentative] on ppc0
plip0.ppbus0.ppc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
plip0: <PLIP network interface> [tentative] on ppbus0
lp0: bpf attached
plip0: <PLIP network interface> [attached!] on ppbus0
lpt0.ppbus0.ppc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
lpt0: <Printer> [tentative] on ppbus0
lpt0: Interrupt-driven port
lpt0: <Printer> [attached!] on ppbus0
ppi0.ppbus0.ppc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
ppi0: <Parallel I/O> [tentative] on ppbus0
ppi0: <Parallel I/O> [attached!] on ppbus0
ppbus0: <Parallel port bus> [attached!] on ppc0
ppc0: <Parallel port> [attached!] at port 0x378-0x37f irq 7 on isa0
snd0 [tentative] failed to probe at irq 10 drq 1 on isa0
isa_probe_children: probing PnP devices
unknown: <PNP0c04> [tentative] failed to probe at port 0xf0-0xff irq 13 on isa0
unknown: <PNP0200> [tentative] failed to probe at port 0-0xf,0x80-0x8f,0xc0-0xdf drq 4 on isa0
unknown: <PNP0100> [tentative] failed to probe at port 0x40-0x43 irq 0 on isa0
unknown: <PNP0800> [tentative] failed to probe at port 0x61 on isa0
unknown: <PNP0b00> [tentative] failed to probe at port 0x70-0x71,0x72,0x73 irq 8 on isa0
unknown: <PNP0303> [tentative] can't assign resources (port)
unknown: <PNP0303> [tentative] at port 0x60 on isa0
unknown: <PNP0f13> [tentative] can't assign resources (irq)
unknown: <PNP0f13> [tentative] at irq 12 on isa0
unknown: <PNP0401> [tentative] can't assign resources (port)
unknown: <PNP0401> [tentative] at port 0x378-0x37f on isa0
unknown: <PNP0501> [tentative] can't assign resources (port)
unknown: <PNP0501> [tentative] at port 0x3f8-0x3ff on isa0
unknown: <SMCf010> [tentative] can't assign resources (port)
unknown: <SMCf010> [tentative] at port 0x3e8-0x3ef,0x3e8-0x3ef on isa0
unknown: <PNP0e03> [tentative] failed to probe at port 0x3e0-0x3e1 on isa0
unknown: <PNP0c02> [tentative] can't assign resources (memory)
unknown: <PNP0c02> [tentative] at iomem 0xfff0000-0x100effff on isa0
BIOS Geometries:
0:03fdef3f 0..1021=1022 cylinders, 0..239=240 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
lo0: bpf attached
ppp0: bpf attached
sl0: bpf attached
faith0: bpf attached
ad0: success setting UDMA5 on Intel chip
ar: FreeBSD check1 failed
ad0: <TOSHIBA MK8025GAS/KA023A> ATA-6 disk at ata0-master
ad0: 76319MB (156301488 sectors), 155061 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <SONY DVD+RW DW-P50A/1.8f> CD-RW drive at ata1 as master
acd0: read 4134KB/s (34515KB/s) write 2755KB/s (2755KB/s), 8192KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, packet
acd0: Writes: CD-R, CD-RW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
pcm0: measured ac97 link rate at 48001 Hz, will use 48000 Hz
bus_explore done
sbp_post_explore (sbp_cold=2)
(probe2:ata1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe2:ata1:0:0:0): NOT READY asc:3a,0
(probe2:ata1:0:0:0): Medium not present
pass0 at ata1 bus 0 target 0 lun 0
pass0: <SONY DVD+RW DW-P50A 1.8f> Removable CD-ROM SCSI-0 device
pass0: Serial Number [
pass0: 16.000MB/s transfers
bootdev: a0300000 type=0 unit=0 slice=3 part=0 major=3
Mounting root from ufs:/dev/ad0s2a
(cd0:ata1:0:0:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd0:ata1:0:0:0): NOT READY asc:3a,0
(cd0:ata1:0:0:0): Medium not present
cd0 at ata1 bus 0 target 0 lun 0
cd0: <SONY DVD+RW DW-P50A 1.8f> Removable CD-ROM SCSI-0 device
cd0: Serial Number [
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
ad0s1: type 0x7, start 63, end = 33551279, size 33551217
ad0s1: C/H/S end 1023/119/63 (15475319) != end 33551279: invalid
ad0s2: type 0xa5, start 33551280, end = 116454239, size 82902960 : OK
ad0s3: type 0x6, start 116454240, end = 156295439, size 39841200
ad0s3: C/H/S start 1023/0/1 (15467760) != start 116454240: invalid
start_init: trying /sbin/init
[
Date Prev][
Date Next]
[
Thread Prev][
Thread Next]
[
Date Index][
Thread Index]
