DragonFly bugs List (threaded) for 2005-12
[
Date Prev][
Date Next]
[
Thread Prev][
Thread Next]
[
Date Index][
Thread Index]
Re: No detection of 8169S Gb interface
171f3@xxxxxxxxxxxxxx>
In-Reply-To: <ea7b9c170512220642l39773ad7va16e0824abd171f3@xxxxxxxxxxxxxx>
Content-Type: text/plain; charset=ISO-8859-2; format=flowed
Content-Transfer-Encoding: 8bit
Lines: 38
Message-ID: <43aace05$0$739$415eb37d@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
NNTP-Posting-Host: 84.52.138.2
X-Trace: 1135267333 crater_reader.dragonflybsd.org 739 84.52.138.2
Xref: crater_reader.dragonflybsd.org dragonfly.bugs:5068
Sepherosa Ziehau pravi:
> Please try:http://leaf.dragonflybsd.org/~sephe/rgephy.diff
> You will have rebuild kernel if you have a compiled-in miiIf you use mii as module, you will have to recompile mii module
> I have done a rough test with my re(4)
> Please let us know whether it works or not ASAP, not much time is left :-)Thank you in advance.
Right after booting:
re0: <RealTek 8169S Single-chip Gigabit Ethernet> port 0xa400-0xa4ff mem 0xfb801
000-0xfb8010ff irq 10 at device 2.0 on pci2
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX
-FDX, auto
re0: MAC address: 00:0e:2e:28:08:1f
[web2] ~> ifconfig re0
re0: flags=9843<UP,BROADCAST,RUNNING,SIMPLEX,LINK0,MULTICAST> mtu 1500
options=18<VLAN_MTU,VLAN_HWTAGGING>
inet 10.10.52.50 netmask 0xffffff00 broadcast 10.10.52.255
inet6 fe80::20e:2eff:fe28:81f%re0 prefixlen 64 scopeid 0x1
ether 00:0e:2e:28:08:1f
media: Ethernet autoselect (10baseT/UTP <full-duplex>)
status: active
After down/up sequence:
media: Ethernet autoselect (100baseTX <full-duplex>)
%ifconfig re0 media 1000basetx mediaopt full-duplex
ifconfig: unknown media subtype: 1000basetx
So no luck to set it to gig. I applied your patch and did a nativekernel/installkernel only.
Toma¾
[
Date Prev][
Date Next]
[
Thread Prev][
Thread Next]
[
Date Index][
Thread Index]