DragonFly BSD
DragonFly bugs List (threaded) for 2004-06
[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]

Re: acd0: MODE_SENSE_BIG command timeout - resetting


From: Matthew Dillon <dillon@xxxxxxxxxxxxxxxxxxxx>
Date: Tue, 29 Jun 2004 11:48:41 -0700 (PDT)

    Try putting your hard drive in PIO4 mode.  /ATA/ATAPI support is a real
    crap shoot, and even more so when two devices are sharing the same cable.

					-Matt
					Matthew Dillon 
					<dillon@xxxxxxxxxxxxx>


:
:
:done
:acd0: MODE_SENSE_BIG command timeout - resetting
:ata0: resetting devices .. ad0: DMA limited to UDMA33, not-ATA66 cable 
:or device
:
:
:done
:acd0: MODE_SENSE_BIG command timeout - resetting
:ata0: resetting devices .. ad0: DMA limited to UDMA33, not-ATA66 cable 
:or device
:
:done
:acd0: read data overrun 34/0
:acd0: MODE_SENSE_BIG command timeout - resetting
:ata0: resetting devices .. ad0: DMA limited to UDMA33, not-ATA66 cable 
:or device
:
:done
:acd0: DVD-ROM <DVD-ROM DDu1621> at ata0-slave PIO4
:
:I installed DF on an old 20gb HD which is on the same cable as the 
:DVD-ROM. Every other reboot, consistently, DF gives a series of these 
:messages and then hangs. Power off/on again and DF boots without complaint.
:




[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]