DragonFly On-Line Manual Pages
Smokeping_probes_TacacsPlus(3) SmokePing Smokeping_probes_TacacsPlus(3)
NAME
Smokeping::probes::TacacsPlus - a TacacsPlus authentication probe for
SmokePing
OVERVIEW
Measures TacacsPlus authentication latency for SmokePing
SYNOPSIS
*** Probes ***
+TacacsPlus
forks = 5
offset = 50%
passwordfile = /some/place/secret
secretfile = /another/place/secret
step = 300
# The following variables can be overridden in each target section
authtype = CHAP
mininterval = 1
password = test-password
pings = 5
port = 49
secret = test-secret
timeout = 5
username = test-user # mandatory
# [...]
*** Targets ***
probe = TacacsPlus # if this should be the default probe
# [...]
+ mytarget
# probe = TacacsPlus # if the default probe is something else
host = my.host
authtype = CHAP
mininterval = 1
password = test-password
pings = 5
port = 49
secret = test-secret
timeout = 5
username = test-user # mandatory
DESCRIPTION
This probe measures TacacsPlus authentication latency for SmokePing.
The username to be tested is specified in either the probe-specific or
the target-specific variable `username', with the target-specific one
overriding the probe-specific one.
The password can be specified either (in order of precedence, with the
latter overriding the former) in the probe-specific variable
`password', in an external file or in the target-specific variable
`password'. The location of this file is given in the probe-specific
variable `passwordfile'. See Smokeping::probes::passwordchecker(3pm)
for the format of this file (summary: colon-separated triplets of the
form `<host>:<username>:<password>')
The TacacsPlus protocol requires a shared secret between the server and
the client. This secret can be specified either (in order of
precedence, with the latter overriding the former) in the probe-
specific variable `secret', in an external file or in the target-
specific variable `secret'. This external file is located by the
probe-specific variable `secretfile', and it should contain whitespace-
separated pairs of the form `<host> <secret>'. Comments and blank lines
are OK.
The default TacacsPlus authentication type is ASCII. PAP and CHAP are
also available. See the Authen::TacacsPlus documentation for more
information;
The probe tries to be nice to the server and does not send
authentication requests more frequently than once every X seconds,
where X is the value of the target-specific "min_interval" variable (1
by default).
VARIABLES
Supported probe-specific variables:
forks
Run this many concurrent processes at maximum
Example value: 5
Default value: 5
offset
If you run many probes concurrently you may want to prevent them
from hitting your network all at the same time. Using the probe-
specific offset parameter you can change the point in time when
each probe will be run. Offset is specified in % of total interval,
or alternatively as 'random', and the offset from the 'General'
section is used if nothing is specified here. Note that this does
NOT influence the rrds itself, it is just a matter of when data
acqusition is initiated. (This variable is only applicable if the
variable 'concurrentprobes' is set in the 'General' section.)
Example value: 50%
passwordfile
Location of the file containing usernames and passwords.
Example value: /some/place/secret
secretfile
A file containing the TacacsPlus shared secrets for the targets. It
should contain whitespace-separated pairs of the form `<host>
<secret>'. Comments and blank lines are OK.
Example value: /another/place/secret
step
Duration of the base interval that this probe should use, if
different from the one specified in the 'Database' section. Note
that the step in the RRD files is fixed when they are originally
generated, and if you change the step parameter afterwards, you'll
have to delete the old RRD files or somehow convert them. (This
variable is only applicable if the variable 'concurrentprobes' is
set in the 'General' section.)
Example value: 300
Supported target-specific variables:
authtype
The TacacsPlus Authentication type:ASCII(default), CHAP, PAP
Example value: CHAP
Default value: ASCII
mininterval
The minimum interval between each authentication request sent, in
(possibly fractional) seconds.
Default value: 1
password
The password for the user, if not present in the password file.
Example value: test-password
pings
How many pings should be sent to each target, if different from the
global value specified in the Database section. Note that the
number of pings in the RRD files is fixed when they are originally
generated, and if you change this parameter afterwards, you'll have
to delete the old RRD files or somehow convert them.
Example value: 5
port
The TacacsPlus port to be used
Example value: 49
Default value: 49
secret
The TacacsPlus shared secret for the target, if not present in the
secrets file.
Example value: test-secret
timeout
Timeout in seconds for the TacacsPlus queries.
Default value: 5
username
The username to be tested.
Example value: test-user
This setting is mandatory.
AUTHORS
Gary Mikula <g2ugzm@hotmail.com>
BUGS
Not as yet....
2.6.11 2016-02-19 Smokeping_probes_TacacsPlus(3)