--- sort1.txt	2010-12-02 09:18:16 +0100
+++ sort2.txt	2010-12-02 09:18:23 +0100
@@ -154,58 +154,12 @@
   Origin = "AuthenticAMD"  Id = 0x40f32  Stepping = 2
  0 accounted for
  0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
- 0x1    5   Y     6  3 4 5 7 9 10 11 12 14 15
- 0x1  255   N     6  3 4 5 7 9 10 11 12 14 15
- 0x2  255   N    10  3 4 5 7 9 10 11 12 14 15
- 0x2  255   N    10  3 4 5 7 9 10 11 12 14 15
- 0x3    7   Y     6  3 4 5 7 9 10 11 12 14 15
- 0x3  255   N     6  3 4 5 7 9 10 11 12 14 15
- 0x4  255   N     6  3 4 5 7 9 10 11 12 14 15
- 0x4  255   N     6  3 4 5 7 9 10 11 12 14 15
- 0x6  255   N     2  3 4 5 7 9 10 11 12 14 15
- 0x6  255   N     2  3 4 5 7 9 10 11 12 14 15
- 0x7  255   N     1  3 4 5 7 9 10 11 12 14 15
- 0x7  255   N     1  3 4 5 7 9 10 11 12 14 15
- 0x9  255   N     1  3 4 5 7 9 10 11 12 14 15
- 0x9  255   N     1  3 4 5 7 9 10 11 12 14 15
- 0xa    3   Y     1  3 4 5 7 9 10 11 12 14 15
- 0xa  255   N     1  3 4 5 7 9 10 11 12 14 15
- 0xb  255   N     1  3 4 5 7 9 10 11 12 14 15
- 0xb  255   N     1  3 4 5 7 9 10 11 12 14 15
- 0xc    3   Y     1  3 4 5 7 9 10 11 12 14 15
- 0xc  255   N     1  3 4 5 7 9 10 11 12 14 15
- 0xd   11   Y     1  3 4 5 7 9 10 11 12 14 15
- 0xd  255   N     1  3 4 5 7 9 10 11 12 14 15
- 0xe    5   Y     1  3 4 5 7 9 10 11 12 14 15
- 0xe  255   N     1  3 4 5 7 9 10 11 12 14 15
  Warning: APIC I/O disabled
  cpu0 (BSP): apic id:  0, version: 0x80050010
  cpu1 (AP):  apic id:  1, version: 0x80050010
-$PIR: 0:10 INTA routed to irq 3
-$PIR: 0:2 INTA routed to irq 11
-$PIR: 0:2 INTB routed to irq 11
-$PIR: 0:4 INTA routed to irq 3
-$PIR: 0:7 INTA routed to irq 11
-$PIR: 0:8 INTA routed to irq 5
-$PIR: 1:6 INTA routed to irq 5
-$PIR: 5:0 INTA routed to irq 7
-$PIR: Found IRQ 11 for link 0x7 from 3 5 7 11
-$PIR: Found IRQ 11 for link 0x9 from 3 5 7 11
-$PIR: Found matching pin for 0.1.INTA at func 1: 255
-$PIR: Found matching pin for 0.10.INTA at func 0: 3
-$PIR: Found matching pin for 0.2.INTA at func 0: 255
-$PIR: Found matching pin for 0.2.INTB at func 1: 255
-$PIR: Found matching pin for 0.4.INTA at func 0: 3
-$PIR: Found matching pin for 0.7.INTA at func 0: 11
-$PIR: Found matching pin for 0.8.INTA at func 0: 5
-$PIR: Found matching pin for 1.6.INTA at func 0: 5
-$PIR: Found matching pin for 5.0.INTA at func 0: 7
-$PIR: IRQs used by BIOS: 3 5 7 11
-$PIR: Interrupt Weights:
-$PIR: Links after initial IRQ discovery:
-$PIR: Links after initial probe:
+.nexus0.root0
 0x00001000 - 0x0009dfff, 643072 bytes (157 pages)
-0x00954000 - 0xd7ebffff, 3612786688 bytes (882028 pages)
+0x00965000 - 0xd7ebffff, 3612717056 bytes (882011 pages)
 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
@@ -219,10 +173,10 @@
 ACPI MADT: RSDP not in EBDA
 ACPI MADT: cpu_id 0, apic_id 0
 ACPI MADT: cpu_id 1, apic_id 1
-ACPI timer looks BAD  min = 4, max = 7, width = 3
 ACPI timer looks BAD  min = 4, max = 8, width = 4
 ACPI timer looks BAD  min = 4, max = 8, width = 4
-ACPI timer looks BAD  min = 4, max = 9, width = 5
+ACPI timer looks BAD  min = 4, max = 8, width = 4
+ACPI timer looks BAD  min = 4, max = 8, width = 4
 ACPI timer looks BAD  min = 4, max = 9, width = 5
 ACPI timer looks BAD  min = 4, max = 9, width = 5
 ACPI timer looks GOOD min = 4, max = 6, width = 2
@@ -260,27 +214,41 @@
 CLK_USE_I8254_CALIBRATION not specified - using default frequency
 CLK_USE_TSC_CALIBRATION not specified - using old calibration method
 CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (2613.41-MHz 686-class CPU)
-Calibrating clock(s) ... TSC clock: 2613388746 Hz, i8254 clock: 1193180 Hz
+Calibrating clock(s) ... TSC clock: 2613391034 Hz, i8254 clock: 1193181 Hz
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 Copyright (c) 1992-2003 The FreeBSD Project.
 Copyright (c) 2003-2010 The DragonFly Project.
 Data TLB: 32 entries, fully associative
 Device configuration finished.
-DragonFly v2.7.3.1219.g18190e-DEVELOPMENT #22: Thu Dec  2 00:43:49 CET 2010
+DragonFly v2.9.1.115.g3de8a-DEVELOPMENT #21: Mon Nov 29 00:46:43 CET 2010
 DragonFly/MP: Multiprocessor motherboard
 FQ scheduler policy version 1.0 loaded
 Finish MP startup
 HAMMER(ROOT) mounted clean, no recovery needed
-HAMMER(ROOT) recovery check seqno=03fe0b03
-HAMMER(ROOT) recovery nexto 3000000006e89558 endseqno=03fe0b04
-HAMMER(ROOT) recovery range 3000000006e89558-3000000006e89558
+HAMMER(ROOT) recovery check seqno=03f5fc5e
+HAMMER(ROOT) recovery nexto 3000000005f80d08 endseqno=03f5fc5f
+HAMMER(ROOT) recovery range 3000000005f80d08-3000000005f80d08
 Instruction TLB: 32 entries, fully associative
 L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
 L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
 L2 internal cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
-Link  IRQ  Rtd  Ref  IRQs
-Link  IRQ  Rtd  Ref  IRQs
 Linux ELF exec handler installed
+MPTable: Try routing through ISA bus for bus 0 slot 10 INTA irq 3
+MPTable: Try routing through ISA bus for bus 0 slot 2 INTA irq 255
+MPTable: Try routing through ISA bus for bus 0 slot 2 INTB irq 255
+MPTable: Try routing through ISA bus for bus 0 slot 4 INTA irq 3
+MPTable: Try routing through ISA bus for bus 0 slot 7 INTA irq 11
+MPTable: Try routing through ISA bus for bus 0 slot 8 INTA irq 5
+MPTable: Try routing through ISA bus for bus 1 slot 6 INTA irq 5
+MPTable: Try routing through ISA bus for bus 5 slot 0 INTA irq 7
+MPTable: Unable to route for bus 0 slot 10 INTA
+MPTable: Unable to route for bus 0 slot 2 INTA
+MPTable: Unable to route for bus 0 slot 2 INTB
+MPTable: Unable to route for bus 0 slot 4 INTA
+MPTable: Unable to route for bus 0 slot 7 INTA
+MPTable: Unable to route for bus 0 slot 8 INTA
+MPTable: Unable to route for bus 1 slot 6 INTA
+MPTable: Unable to route for bus 5 slot 0 INTA
 Math emulator present
 Module pci/ahci failed to register: 17
 Mounting devfs
@@ -290,11 +258,11 @@
 Other BIOS signatures found:
 Pentium Pro MTRR support enabled
 Physical memory chunk(s):
-Preloaded elf kernel "kernel" at 0xc0927000.
-Preloaded elf module "acpi.ko" at 0xc092730c.
-Preloaded elf module "ahci.ko" at 0xc09273a8.
-Preloaded elf module "ehci.ko" at 0xc0927444.
-Preloaded elf module "linux.ko" at 0xc092726c.
+Preloaded elf kernel "kernel" at 0xc0936000.
+Preloaded elf module "acpi.ko" at 0xc093630c.
+Preloaded elf module "ahci.ko" at 0xc09363a8.
+Preloaded elf module "ehci.ko" at 0xc0936444.
+Preloaded elf module "linux.ko" at 0xc093626c.
 SMP: AP CPU #1 Launched!
 SMP: CPU0 apic_initialize():
 SMP: CPU1 apic_initialize():
@@ -311,12 +279,10 @@
 VGA parameters to be used for mode 24
 VGA parameters upon power-up
 Warning: ACPI is disabling APM's device.  You can't run both
-[    0   0   0   2   0   7   0   6   0   0   0   1   0   0   0   0 ]
-[    0   1   2   3   4   5   6   7   8   9  10  11  12  13  14  15 ]
-acpi0.nexus0.root0
 acpi0: <Nvidia ASUSACPI> [attached!] at port 0x10-0x1f,0x22-0x3f,0x44-0x5f,0x62-0x63,0x65-0x6f,0x74-0x7f,0x91-0x93,0xa2-0xbf,0xe0-0xef,0x4d0-0x4d1,0x800-0x87f,0x290-0x297,0x4000-0x407f,0x4080-0x40ff,0x4400-0x447f,0x4480-0x44ff,0x4800-0x487f,0x4880-0x48ff iomem 0xd1800-0xd3fff,0xf0000-0xf7fff,0xf8000-0xfbfff,0xfc000-0xfffff,0xd7ee0000-0xd7efffff,0xffff0000-0xffffffff,0-0x9ffff,0x100000-0xd7edffff,0xfec00000-0xfec00fff,0xfee00000-0xfeefffff,0xfefff000-0xfeffffff,0xfff80000-0xfff80fff,0xfff90000-0xfffbffff,0xfffed000-0xfffeffff,0xe0000000-0xefffffff irq 9 on motherboard
 acpi0: <Nvidia ASUSACPI> [tentative] on motherboard
 acpi0: Power Button (fixed)
+acpi0sched_ithd: stray interrupt 7 on cpu 0
 acpi_button0.acpi0.nexus0.root0
 acpi_button0: <Power Button> [attached!] on acpi0
 acpi_button0: <Power Button> [tentative] on acpi0
@@ -440,7 +406,7 @@
 atphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
 atphy0: <Atheros F1 10/100/1000 PHY> [attached!] on miibus1
 atphy0: <Atheros F1 10/100/1000 PHY> [tentative] on miibus1
-avail memory = 3496206336 (3334 MB)
+avail memory = 3496136704 (3334 MB)
 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
@@ -450,7 +416,7 @@
 bios32: Entry = 0xf1fe0 (c00f1fe0)  Rev = 0  Len = 1
 bios32: Found BIOS32 Service Directory header at 0xc00fb930
 bootdev: a0300000 type=0 unit=0 slice=3 part=0 major=3
-bridge0: MAC address: 46:f8:2e:0a:9b:b9
+bridge0: MAC address: 82:d9:8a:ee:7f:64
 bridge0: bpf attached
 bt0 [tentative] failed to probe at port 0x134-0x137 on isa0
 bt0: Failed Status Reg Test - ff
@@ -526,12 +492,14 @@
 cryptosoft0: <software crypto> [attached!] on motherboard
 cryptosoft0: <software crypto> [tentative] on motherboard
 cs0: not probed (disabled)
+device_probe_and_attach: ehci0 attach returned 6
+device_probe_and_attach: ohci0 attach returned 6
 disk scheduler: set policy of ad8 to noop
 disk scheduler: set policy of md0 to noop
 ed0: not probed (disabled)
 ehci0.pci0.pcib0.legacy0.nexus0.root0
-ehci0: <NVIDIA nForce4 USB 2.0 controller> [attached!] mem 0xfeb00000-0xfeb000ff irq 11 at device 2.1 on pci0
 ehci0: <NVIDIA nForce4 USB 2.0 controller> [tentative] mem 0xfeb00000-0xfeb000ff at device 2.1 on pci0
+ehci0: Could not allocate irq
 ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfeb00000
 ex_isa_identify()
 faith0: bpf attached
@@ -589,7 +557,7 @@
 kbd1 at kbdmux0
 kbd: new array size 4
 lapic: at 0xfee00000
-lapic: divisor index 0, frequency 100515306 Hz
+lapic: divisor index 0, frequency 100515285 Hz
 lm0 [tentative] failed to probe at port 0x290-0x297 on isa0
 lnc0: not probed (disabled)
 lo0: bpf attached
@@ -619,8 +587,8 @@
 objcache_reclaimlist
 objcache_reclaimlist
 ohci0.pci0.pcib0.legacy0.nexus0.root0
-ohci0: <OHCI (generic) USB controller> [attached!] mem 0xfe02f000-0xfe02ffff irq 11 at device 2.0 on pci0
 ohci0: <OHCI (generic) USB controller> [tentative] mem 0xfe02f000-0xfe02ffff at device 2.0 on pci0
+ohci0: Could not allocate irq
 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02f000
 orm0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
 orm0: <Option ROMs> [attached!] at iomem 0xc0000-0xcefff,0xd0000-0xd17ff on isa0
@@ -656,8 +624,8 @@
 pci_open(1):	mode 1 addr port (0x0cf8) is 0x80004004
 pci_open(1a):	mode1res=0x80000000 (0x80000000)
 pcib0.legacy0.nexus0.root0
-pcib0: <Host to PCI bridge> [attached!] pcibus 0 on motherboard
-pcib0: <Host to PCI bridge> [tentative] pcibus 0 on motherboard
+pcib0: <MPTable Host-PCI bridge> [attached!] pcibus 0 on motherboard
+pcib0: <MPTable Host-PCI bridge> [tentative] pcibus 0 on motherboard
 pcib1.pci0.pcib0.legacy0.nexus0.root0
 pcib1:   I/O decode        0xa000-0xafff
 pcib1:   Subtractively decoded bridge.
@@ -666,8 +634,8 @@
 pcib1:   no prefetched decode
 pcib1:   secondary bus     1
 pcib1:   subordinate bus   1
-pcib1: <PCIBIOS PCI-PCI bridge> [attached!] at device 9.0 on pci0
-pcib1: <PCIBIOS PCI-PCI bridge> [tentative] at device 9.0 on pci0
+pcib1: <MPTable PCI-PCI bridge> [attached!] at device 9.0 on pci0
+pcib1: <MPTable PCI-PCI bridge> [tentative] at device 9.0 on pci0
 pcib1: requested I/O range 0xac00-0xacff: in range
 pcib1: requested memory range 0xfdfff000-0xfdfff0ff: good
 pcib2.pci0.pcib0.legacy0.nexus0.root0
@@ -676,24 +644,24 @@
 pcib2:   no prefetched decode
 pcib2:   secondary bus     2
 pcib2:   subordinate bus   2
-pcib2: <PCIBIOS PCI-PCI bridge> [attached!] at device 11.0 on pci0
-pcib2: <PCIBIOS PCI-PCI bridge> [tentative] at device 11.0 on pci0
+pcib2: <MPTable PCI-PCI bridge> [attached!] at device 11.0 on pci0
+pcib2: <MPTable PCI-PCI bridge> [tentative] at device 11.0 on pci0
 pcib3.pci0.pcib0.legacy0.nexus0.root0
 pcib3:   I/O decode        0x0-0x0
 pcib3:   domain            0
 pcib3:   no prefetched decode
 pcib3:   secondary bus     3
 pcib3:   subordinate bus   3
-pcib3: <PCIBIOS PCI-PCI bridge> [attached!] at device 12.0 on pci0
-pcib3: <PCIBIOS PCI-PCI bridge> [tentative] at device 12.0 on pci0
+pcib3: <MPTable PCI-PCI bridge> [attached!] at device 12.0 on pci0
+pcib3: <MPTable PCI-PCI bridge> [tentative] at device 12.0 on pci0
 pcib4.pci0.pcib0.legacy0.nexus0.root0
 pcib4:   I/O decode        0x0-0x0
 pcib4:   domain            0
 pcib4:   no prefetched decode
 pcib4:   secondary bus     4
 pcib4:   subordinate bus   4
-pcib4: <PCIBIOS PCI-PCI bridge> [attached!] at device 13.0 on pci0
-pcib4: <PCIBIOS PCI-PCI bridge> [tentative] at device 13.0 on pci0
+pcib4: <MPTable PCI-PCI bridge> [attached!] at device 13.0 on pci0
+pcib4: <MPTable PCI-PCI bridge> [tentative] at device 13.0 on pci0
 pcib5.pci0.pcib0.legacy0.nexus0.root0
 pcib5:   I/O decode        0xf000-0xfff
 pcib5:   domain            0
@@ -701,16 +669,13 @@
 pcib5:   prefetched decode 0xd8000000-0xdfffffff
 pcib5:   secondary bus     5
 pcib5:   subordinate bus   5
-pcib5: <PCIBIOS PCI-PCI bridge> [attached!] at device 14.0 on pci0
-pcib5: <PCIBIOS PCI-PCI bridge> [tentative] at device 14.0 on pci0
+pcib5: <MPTable PCI-PCI bridge> [attached!] at device 14.0 on pci0
+pcib5: <MPTable PCI-PCI bridge> [tentative] at device 14.0 on pci0
 pcib5: requested memory range 0xd8000000-0xdfffffff: good
 pcib5: requested memory range 0xf4000000-0xf7ffffff: good
 pcib5: requested memory range 0xfa000000-0xfaffffff: good
 pcibios: BIOS version 3.00
 pcibios: PCI BIOS entry at 0x2010
-pir0.legacy0.nexus0.root0
-pir0: <PCI Interrupt Routing Table: 13 Entries> [attached!] on motherboard
-pir0: <PCI Interrupt Routing Table: 13 Entries> [tentative] on motherboard
 pmtimer0 [attached!] on isa0
 pmtimer0 [tentative] on isa0
 pmtimer0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
@@ -722,7 +687,7 @@
 psm0.atkbdc0.acpi0.nexus0.root0
 psm0: <PS/2 Mouse> [attached!] irq 12 on atkbdc0
 psm0: <PS/2 Mouse> [tentative] irq 12 on atkbdc0
-psm0: config:00000000, flags:00000000, packet size:4
+psm0: config:00000000, flags:00000008, packet size:4
 psm0: current command byte:0047
 psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons
 psm0: syncmask:08, syncbits:00
@@ -749,8 +714,8 @@
 sched_ithd: stray interrupt 7 on cpu 0
 sched_ithd: stray interrupt 7 on cpu 0
 sched_ithd: stray interrupt 7 on cpu 0
-sched_ithd: stray interrupt 7 on cpu 1
-sched_ithd: stray interrupt 7 on cpu 1
+sched_ithd: stray interrupt 7 on cpu 0
+sched_ithd: stray interrupt 7 on cpu 0
 sio-: sio0 exists, using next available unit number
 sio-: sio1 exists, using next available unit number
 sio-: sio2 exists, using next available unit number
@@ -770,17 +735,9 @@
 start dummy scheduler helpers on cpus: 0 1
 start scheduler helpers on cpus: 0 1
 start_init: trying /sbin/init
-tap0: MAC address: 00:bd:ec:07:00:00
+tap0: MAC address: 00:bd:e9:06:00:00
 tap0: bpf attached
 tryroot serno/9QM9CEL4.s2d
-uhub0.usb0.ohci0.pci0.pcib0.legacy0.nexus0.root0
-uhub0: 10 ports with 10 removable, self powered
-uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb0
-uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb0
-uhub1.usb1.ehci0.pci0.pcib0.legacy0.nexus0.root0
-uhub1: 10 ports with 10 removable, self powered
-uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> [attached!] on usb1
-uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> [tentative] on usb1
 unknown: not probed (disabled)
 unknown: not probed (disabled)
 unknown: not probed (disabled)
@@ -792,17 +749,6 @@
 unknown: not probed (disabled)
 unknown: not probed (disabled)
 unknown: not probed (disabled)
-usb0.ohci0.pci0.pcib0.legacy0.nexus0.root0
-usb0: <OHCI (generic) USB controller> [attached!] on ohci0
-usb0: <OHCI (generic) USB controller> [tentative] on ohci0
-usb0: OHCI version 1.0, legacy support
-usb0: USB revision 1.0
-usb1.ehci0.pci0.pcib0.legacy0.nexus0.root0
-usb1: <NVIDIA nForce4 USB 2.0 controller> [attached!] on ehci0
-usb1: <NVIDIA nForce4 USB 2.0 controller> [tentative] on ehci0
-usb1: EHCI version 1.0
-usb1: USB revision 2.0
-usb1: companion controller, 4 ports each: usb0
 vga0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
 vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
