Copyright (c) 2003-2008 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly 1.13.0-DEVELOPMENT #4: Mon Apr 28 22:07:35 GMT 2008
    root@xanadu:/usr/obj/usr/src/sys/XANADU_SMP
TSC clock: 2200059724 Hz, i8254 clock: 1193172 Hz
CPU: AMD Phenom(tm) 9550 Quad-Core Processor (2200.09-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x100f23  Stepping = 3
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x802009<SSE3,MON,CX16,<b23>>
  Hyperthreading: 4 logical CPUs
  AMD Features=0xe8500000<<b20>,AMIE,<b27>,<b29>,DSP,3DNow!>
real memory  = 2113798144 (2064256K bytes)
avail memory = 2043035648 (1995152K bytes)
Changing APIC ID for IO APIC #0 from 0 to 4 on chip
Programming 24 pins in IOAPIC #0
DragonFly/MP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  0, version: 0x80050010, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x80050010, at 0xfee00000
 cpu2 (AP):  apic id:  2, version: 0x80050010, at 0xfee00000
 cpu3 (AP):  apic id:  3, version: 0x80050010, at 0xfee00000
 io0 (APIC): apic id:  4, version: 0x00178021, at 0xfec00000
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
objcache(exec-args): too small for ncpus, adjusting cluster_limit 16->64
Preloaded elf kernel "/kernel" at 0xc04d8000.
Preloaded elf module "/modules/miibus.ko" at 0xc04d8238.
Preloaded elf module "/modules/if_em.ko" at 0xc04d82e0.
Preloaded elf module "/modules/if_re.ko" at 0xc04d8388.
Preloaded elf module "/modules/acpi.ko" at 0xc04d8430.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 3.00
ACPI: RSDP @ 0x0xf8450/0x0024 (v  2 RS780 )
ACPI: XSDT @ 0x0x7dfe3080/0x0044 (v  1 RS780  AWRDACPI 0x42302E31 AWRD 0x00000000)
ACPI: FACP @ 0x0x7dfe7dc0/0x00F4 (v  3 RS780  AWRDACPI 0x42302E31 AWRD 0x00000000)
ACPI: DSDT @ 0x0x7dfe3200/0x4BA3 (v  1 RS780  AWRDACPI 0x00001000 MSFT 0x03000000)
ACPI: FACS @ 0x0x7dfe0000/0x0040
ACPI: HPET @ 0x0x7dfe7f80/0x0038 (v  1 RS780  AWRDACPI 0x42302E31 AWRD 0x00000098)
ACPI: MCFG @ 0x0x7dfe7fc0/0x003C (v  1 RS780  AWRDACPI 0x42302E31 AWRD 0x00000000)
ACPI: APIC @ 0x0x7dfe7ec0/0x0084 (v  1 RS780  AWRDACPI 0x42302E31 AWRD 0x00000000)
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
acpi0: <RS780 AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device.  You can't run both
ACPI Error (uteval-0322): No object was returned from [\\_SB_.PCI0.SMB0._CRS] (Node 0xc3f240e4), AE_NOT_EXIST
can't fetch resources for \\_SB_.PCI0.SMB0 - AE_NOT_EXIST
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
legacypci0 on motherboard
pcib0: <Host to PCI bridge> on legacypci0
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1022 device=9602)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 9610 graphics accelerator> at 5.0 irq 2
pcib2: <PCI to PCI bridge (vendor=1022 device=9603)> irq 2 at device 2.0 on pci0
pci2: <PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection, Version - 6.2.9> port 0xdf00-0xdf1f mem 0xfdcc0000-0xfdcdffff,0xfdce0000-0xfdcfffff irq 2 at device 0.0 on pci2
Warning: ACPI idle hook not yet supported for SMP
em0: MAC address: 00:0e:0c:81:76:ba
em1: <Intel(R) PRO/1000 Network Connection, Version - 6.2.9> port 0xde00-0xde1f mem 0xfdc80000-0xfdc9ffff,0xfdca0000-0xfdcbffff irq 16 at device 0.1 on pci2
em1: MAC address: 00:0e:0c:81:76:bb
pcib3: <PCI to PCI bridge (vendor=1022 device=9604)> irq 5 at device 4.0 on pci0
pci3: <PCI bus> on pcib3
re0: <RealTek 8168C/8111C PCIe Gigabit Ethernet> port 0xce00-0xceff mem 0xfdff0000-0xfdffffff,0xfd8ff000-0xfd8fffff irq 5 at device 0.0 on pci3
miibus0: <MII bus> on re0
rgephy0: <8211B/RTL8169S/8110S media interface> on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: MAC address: 00:30:18:a9:88:da
atapci0: <ATI ATA controller> port 0xfb00-0xfb0f,0xfc00-0xfc03,0xfd00-0xfd07,0xfe00-0xfe03,0xff00-0xff07 mem 0xfe02f000-0xfe02f3ff irq 10 at device 17.0 on pci0
ata2: <ATA channel 0> on atapci0
ad4: 152627MB <Seagate ST3160815AS 4.AAB> at ata2-master UDMA33
ata3: <ATA channel 1> on atapci0
pci0: <OHCI USB controller> at 18.0 irq 5
pci0: <OHCI USB controller> at 18.1 irq 5
pci0: <USB controller> at 18.2 irq 11
pci0: <OHCI USB controller> at 19.0 irq 2
pci0: <OHCI USB controller> at 19.1 irq 2
pci0: <USB controller> at 19.2 irq 16
pci0: <unknown card> (vendor=0x1002, dev=0x4385) at 20.0
atapci1: <ATI ATA controller> port 0xfa00-0xfa0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 5 at device 20.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
pci0: <unknown card> (vendor=0x1002, dev=0x4383) at 20.2 irq 5
isab0: <PCI to ISA bridge (vendor=1002 device=439d)> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <PCI to PCI bridge (vendor=1002 device=4384)> at device 20.4 on pci0
pci4: <PCI bus> on pcib4
pci0: <OHCI USB controller> at 20.5 irq 2
pmtimer0 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
ppc1: cannot reserve I/O port range
Mounting root from ufs:/dev/ad4s1a