Copyright (c) 2003-2011 The DragonFly Project. Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. Slab ZoneSize set to 128KB Leaving critical section, allowing interrupts ACPI SDT: RSDP not in EBDA ACPI SDT: RSDP in BIOS mem ACPI FADT: SCI irq 9, conform/conform MPTABLE: warning duplicated PCI int entry for bus 0, dev 16, pin 0 MPTABLE: warning duplicated PCI int entry for bus 0, dev 16, pin 1 DragonFly v2.11.0.200.g0bccf-DEVELOPMENT #0: Sun May 15 12:07:04 CEST 2011 root@zoidberg.luxh.dyndns.info:/usr/obj/usr/src/sys/X86_64_GENERIC_SMP Calibrating clock(s) ... TSC clock: 1838836950 Hz, i8254 clock: 1193216 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: AMD Athlon(tm) 64 Processor 3000+ (1838.80-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x10ff0 Stepping = 0 Features=0x78bfbff AMD Features=0xe2500800 AMD Features2=0x1 L1 2MB data TLB: 8 entries, fully associative L1 2MB instruction TLB: 8 entries, fully associative L1 4KB data TLB: 32 entries, fully associative L1 4KB instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 2MB unified TLB: 0 entries, disabled/not present L2 4KB data TLB: 512 entries, 4-way associative L2 4KB instruction TLB: 512 entries, 4-way associative L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative real memory = 2145972224 (2046 MB) Physical memory chunk(s): 0x00020000 - 0x0007ffff, 393216 bytes (96 pages) 0x01f80000 - 0x7febffff, 2113142784 bytes (515904 pages) avail memory = 1994887168 (1902 MB) ELCR Found. ISA IRQs programmed as: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 E E E E E L E E E L L L E E E E ACPI MADT: LAPIC address 0xfee00000, flags 0x1 lapic: at 0xfee00000 ACPI MADT: BSP apic id 0 ACPI MADT: cpu id 0, apic id 0 lapic: divisor index 0, frequency 102155250 Hz SMP: CPU0 apic_initialize(): lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff SMP: Waiting APs LAPIC initialization ACPI MADT: IOAPIC addr 0xfec00000, apic id 2, gsi base 0 ACPI MADT: INTSRC irq 0 -> gsi 2 edge/high IOAPIC: idx 0, apic id 1, gsi base 0, npin 24 IOAPIC: irq 1 -> gsi 1 edge/high IOAPIC: irq 0 -> gsi 2 edge/high IOAPIC: irq 3 -> gsi 3 edge/high IOAPIC: irq 4 -> gsi 4 edge/high IOAPIC: irq 5 -> gsi 5 edge/high IOAPIC: irq 6 -> gsi 6 edge/high IOAPIC: irq 7 -> gsi 7 edge/high IOAPIC: irq 8 -> gsi 8 edge/high IOAPIC: irq 9 -> gsi 9 edge/high IOAPIC: irq 10 -> gsi 10 edge/high IOAPIC: irq 11 -> gsi 11 edge/high IOAPIC: irq 12 -> gsi 12 edge/high IOAPIC: irq 13 -> gsi 13 edge/high IOAPIC: irq 14 -> gsi 14 edge/high IOAPIC: irq 15 -> gsi 15 edge/high IOAPIC: irq 16 -> gsi 16 level/low IOAPIC: irq 17 -> gsi 17 level/low IOAPIC: irq 18 -> gsi 18 level/low IOAPIC: irq 19 -> gsi 19 level/low IOAPIC: irq 20 -> gsi 20 level/low IOAPIC: irq 21 -> gsi 21 level/low IOAPIC: irq 22 -> gsi 22 level/low IOAPIC: irq 23 -> gsi 23 level/low IOAPIC: irq 2 reserved DragonFly/MP: Multiprocessor motherboard cpu0 (BSP): apic id: 0 Finish MP startup Active CPU Mask: 0000000000000001 ndepotmags=438 x mag_cap=128 for mbuf ndepotmags=4 x mag_cap=33 for mbuf pkt hdr ndepotmags=27 x mag_cap=128 for cluster mbuf ndepotmags=27 x mag_cap=128 for jcluster mbuf ndepotmags=27 x mag_cap=128 for mbuf + cluster ndepotmags=4 x mag_cap=33 for mbuf pkt hdr + cluster ndepotmags=27 x mag_cap=128 for mbuf + jcluster ndepotmags=4 x mag_cap=17 for mbuf pkt hdr + jcluster ndepotmags=4 x mag_cap=33 for sf_buf ndepotmags=3 x mag_cap=4 for exec-args ndepotmags=4 x mag_cap=33 for CCMS Preloaded elf kernel "kernel" at 0xffffffff81a34000. Preloaded elf obj module "snd_emu10k1.ko" at 0xffffffff81a34230. Preloaded elf obj module "sound.ko" at 0xffffffff81a34a90. Preloaded elf obj module "accf_http.ko" at 0xffffffff81a35430. Preloaded elf obj module "acpi.ko" at 0xffffffff81a35cd0. Preloaded elf obj module "ahci.ko" at 0xffffffff81a36668. Preloaded elf obj module "ehci.ko" at 0xffffffff81a36f00. Preloaded elf obj module "uguru.ko" at 0xffffffff81a37798. module_register: module pci/ahci already exists! Module pci/ahci failed to register: 17 start dummy scheduler helpers on cpus: 0 start scheduler helpers on cpus: 0 ndepotmags=4 x mag_cap=9 for thread ndepotmags=4 x mag_cap=33 for dsched-tdio-cache ndepotmags=4 x mag_cap=33 for dsched-tdctx-cache ndepotmags=4 x mag_cap=33 for dsched-diskctx-cache ndepotmags=4 x mag_cap=9 for vmspace ndepotmags=4 x mag_cap=33 for disk-msg-cache ndepotmags=4 x mag_cap=33 for devfs-node-cache ndepotmags=4 x mag_cap=33 for devfs-msg-cache ndepotmags=4 x mag_cap=33 for devfs-dev-cache FQ scheduler policy version 1.0 loaded ndepotmags=4 x mag_cap=33 for propnmbr ndepotmags=4 x mag_cap=33 for propdict ndepotmags=4 x mag_cap=33 for propstng ndepotmags=4 x mag_cap=33 for pdict128 ndepotmags=4 x mag_cap=33 for propdata ndepotmags=4 x mag_cap=33 for pdict32 ndepotmags=4 x mag_cap=33 for proparay ndepotmags=4 x mag_cap=33 for pdict16 ndepotmags=4 x mag_cap=9 for devfs ndepotmags=4 x mag_cap=33 for devfs-rule-cache wlan: <802.11 Link Layer> ndepotmags=4 x mag_cap=33 for ata_request ndepotmags=4 x mag_cap=33 for ata_composite kbd: new array size 4 kbd1 at kbdmux0 ndepotmags=4 x mag_cap=33 for crypto op ndepotmags=4 x mag_cap=33 for crypto desc crypto: No policy for md0 specified, or policy not found disk scheduler: set policy of md0 to noop md0: Malloc disk md0: invalid primary partition table: no magic ACPI: RSDP 0xf77d0 00014 (v0 VIAK8T) ACPI: RSDT 0x7fef3040 00034 (v1 VIAK8T AWRDACPI 42302E31 AWRD 00000000) ACPI: FACP 0x7fef30c0 00074 (v1 VIAK8T AWRDACPI 42302E31 AWRD 00000000) ACPI: DSDT 0x7fef3180 04F8A (v1 VIAK8T AWRDACPI 00001000 MSFT 0100000E) ACPI: FACS 0x7fef0000 00040 ACPI: BOOT 0x7fef8180 00028 (v1 VIAK8T AWRDACPI 42302E31 AWRD 00000000) ACPI: SSDT 0x7fef82c0 000B5 (v1 PTLTD POWERNOW 00000001 LTP 00000001) ACPI: APIC 0x7fef8200 00068 (v1 VIAK8T AWRDACPI 42302E31 AWRD 00000000) cryptosoft0.nexus0.root0 cryptosoft0: [tentative] on motherboard crypto: assign cryptosoft0 driver id 0, flags 234881024 crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0 cryptosoft0: [attached!] on motherboard acpi0.nexus0.root0 acpi0: [tentative] on motherboard ndepotmags=4 x mag_cap=33 for Acpi-Namespace ndepotmags=4 x mag_cap=33 for Acpi-State ndepotmags=4 x mag_cap=33 for Acpi-Parse ndepotmags=4 x mag_cap=33 for Acpi-ParseExt ndepotmags=4 x mag_cap=33 for Acpi-Operand ACPI FADT: SCI testing interrupt mode ... ACPI FADT: SCI testing level/low IOAPIC: irq 9, gsi 9 edge/high -> level/low ACPI FADT: SCI select level/low pci_open(1): mode 1 addr port (0x0cf8) is 0x8000c060 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=02821106) objcache_reclaimlist objcache_reclaimlist objcache_reclaimlist objcache_reclaimlist acpi0: Power Button (fixed) Warning: ACPI is disabling APM's device. You can't run both unknown: not probed (disabled) ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 1, max = 3, width = 2 ACPI timer looks GOOD min = 1, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 1, max = 3, width = 2 ACPI timer looks GOOD min = 1, max = 3, width = 2 ACPI timer looks GOOD min = 1, max = 3, width = 2 ACPI timer looks GOOD min = 1, max = 3, width = 2 ACPI timer looks GOOD min = 1, max = 3, width = 2 ACPI timer looks GOOD min = 1, max = 3, width = 2 acpi_timer0.acpi0.nexus0.root0 acpi_timer0: <24-bit timer at 3.579545MHz> [tentative] port 0x4008-0x400b on acpi0 acpi_timer0: <24-bit timer at 3.579545MHz> [attached!] port 0x4008-0x400b on acpi0 unknown: not probed (disabled) pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 4 6 7 10 11 12 Validation 0 255 N 0 3 4 6 7 10 11 12 After Disable 0 255 N 0 3 4 6 7 10 11 12 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 6 7 10 11 12 Validation 0 11 N 0 3 4 6 7 10 11 12 After Disable 0 255 N 0 3 4 6 7 10 11 12 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 6 7 10 11 12 Validation 0 10 N 0 3 4 6 7 10 11 12 After Disable 0 255 N 0 3 4 6 7 10 11 12 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 6 7 10 11 12 Validation 0 10 N 0 3 4 6 7 10 11 12 After Disable 0 255 N 0 3 4 6 7 10 11 12 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 6 7 10 11 12 Validation 0 11 N 0 3 4 6 7 10 11 12 After Disable 0 255 N 0 3 4 6 7 10 11 12 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 6 7 10 11 12 Validation 0 255 N 0 3 4 6 7 10 11 12 After Disable 0 255 N 0 3 4 6 7 10 11 12 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 4 6 7 10 11 12 Validation 0 255 N 0 3 4 6 7 10 11 12 After Disable 0 255 N 0 3 4 6 7 10 11 12 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 6 7 10 11 12 Validation 0 11 N 0 3 4 6 7 10 11 12 After Disable 0 255 N 0 3 4 6 7 10 11 12 pci_link8: Index IRQ Rtd Ref IRQs Initial Probe 0 20 N 0 20 Validation 0 20 N 0 20 After Disable 0 255 N 0 20 pci_link9: Index IRQ Rtd Ref IRQs Initial Probe 0 21 N 0 21 Validation 0 21 N 0 21 After Disable 0 255 N 0 21 pci_link10: Index IRQ Rtd Ref IRQs Initial Probe 0 22 N 0 22 Validation 0 22 N 0 22 After Disable 0 255 N 0 22 pci_link11: Index IRQ Rtd Ref IRQs Initial Probe 0 23 N 0 23 Validation 0 23 N 0 23 After Disable 0 255 N 0 23 acpi_button0.acpi0.nexus0.root0 acpi_button0: [tentative] on acpi0 acpi_button0: [attached!] on acpi0 pcib0.acpi0.nexus0.root0 pcib0: [tentative] port 0xcf8-0xcff on acpi0 pci0.pcib0.acpi0.nexus0.root0 pci0: [tentative] on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x1106, dev=0x0282, revid=0x00 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[10]: type Prefetchable Memory, range 32, base 0xe0000000, size 27, enabled found-> vendor=0x1106, dev=0x1282, revid=0x00 domain=0, bus=0, slot=0, func=1 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1106, dev=0x2282, revid=0x00 domain=0, bus=0, slot=0, func=2 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1106, dev=0x3282, revid=0x00 domain=0, bus=0, slot=0, func=3 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1106, dev=0x4282, revid=0x00 domain=0, bus=0, slot=0, func=4 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1106, dev=0x7282, revid=0x00 domain=0, bus=0, slot=0, func=7 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1106, dev=0xb188, revid=0x00 domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D1 D3 current D0 found-> vendor=0x1106, dev=0x3044, revid=0x46 domain=0, bus=0, slot=7, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x20 (8000 ns) intpin=a, irq=11 powerspec 2 supports D0 D2 D3 current D0 map[10]: type Memory, range 32, base 0xf812c000, size 11, enabled map[14]: type I/O Port, range 32, base 0xdd00, size 7, enabled pcib0: matched entry for 0.7.INTA pcib0: slot 7 INTA hardwired to IRQ 23 found-> vendor=0x1102, dev=0x0002, revid=0x07 domain=0, bus=0, slot=9, func=0 class=04-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x14 (5000 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xe300, size 5, enabled pcib0: matched entry for 0.9.INTA pcib0: slot 9 INTA hardwired to IRQ 17 found-> vendor=0x1102, dev=0x7002, revid=0x07 domain=0, bus=0, slot=9, func=1 class=09-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xe400, size 3, enabled found-> vendor=0x1814, dev=0x0302, revid=0x00 domain=0, bus=0, slot=10, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0410, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xf8120000, size 15, enabled pcib0: matched entry for 0.10.INTA pcib0: slot 10 INTA hardwired to IRQ 18 found-> vendor=0x1113, dev=0x1211, revid=0x10 domain=0, bus=0, slot=11, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xc000, size 8, enabled map[14]: type Memory, range 32, base 0xf8128000, size 8, enabled pcib0: matched entry for 0.11.INTA pcib0: slot 11 INTA hardwired to IRQ 19 found-> vendor=0x10ec, dev=0x8139, revid=0x10 domain=0, bus=0, slot=12, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xc400, size 8, enabled map[14]: type Memory, range 32, base 0xf8129000, size 8, enabled pcib0: matched entry for 0.12.INTA pcib0: slot 12 INTA hardwired to IRQ 20 found-> vendor=0x1106, dev=0x3119, revid=0x11 domain=0, bus=0, slot=14, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xc800, size 8, enabled map[14]: type Memory, range 32, base 0xf812a000, size 8, enabled pcib0: matched entry for 0.14.INTA pcib0: slot 14 INTA hardwired to IRQ 22 found-> vendor=0x1106, dev=0x3149, revid=0x80 domain=0, bus=0, slot=15, func=0 class=01-04-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xd800, size 3, enabled map[14]: type I/O Port, range 32, base 0xd900, size 2, enabled map[18]: type I/O Port, range 32, base 0xda00, size 3, enabled map[1c]: type I/O Port, range 32, base 0xdb00, size 2, enabled map[20]: type I/O Port, range 32, base 0xdc00, size 4, enabled map[24]: type I/O Port, range 32, base 0xcc00, size 8, enabled pcib0: matched entry for 0.15.INTB (src \\_SB_.PCI0.ALKA:0) pcib0: slot 15 INTB routed to irq 20 via \\_SB_.PCI0.ALKA found-> vendor=0x1106, dev=0x0571, revid=0x06 domain=0, bus=0, slot=15, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 map[20]: type I/O Port, range 32, base 0xde00, size 4, enabled found-> vendor=0x1106, dev=0x3038, revid=0x81 domain=0, bus=0, slot=16, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type I/O Port, range 32, base 0xdf00, size 5, enabled pcib0: matched entry for 0.16.INTA pcib0: slot 16 INTA hardwired to IRQ 21 found-> vendor=0x1106, dev=0x3038, revid=0x81 domain=0, bus=0, slot=16, func=1 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type I/O Port, range 32, base 0xe000, size 5, enabled pcib0: matched entry for 0.16.INTA pcib0: slot 16 INTA hardwired to IRQ 21 found-> vendor=0x1106, dev=0x3038, revid=0x81 domain=0, bus=0, slot=16, func=2 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type I/O Port, range 32, base 0xe100, size 5, enabled pcib0: matched entry for 0.16.INTB pcib0: slot 16 INTB hardwired to IRQ 21 found-> vendor=0x1106, dev=0x3038, revid=0x81 domain=0, bus=0, slot=16, func=3 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type I/O Port, range 32, base 0xe200, size 5, enabled pcib0: matched entry for 0.16.INTB pcib0: slot 16 INTB hardwired to IRQ 21 found-> vendor=0x1106, dev=0x3104, revid=0x86 domain=0, bus=0, slot=16, func=4 class=0c-03-20, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xf812b000, size 8, enabled pcib0: matched entry for 0.16.INTC pcib0: slot 16 INTC hardwired to IRQ 21 found-> vendor=0x1106, dev=0x3227, revid=0x00 domain=0, bus=0, slot=17, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 found-> vendor=0x1106, dev=0x3059, revid=0x60 domain=0, bus=0, slot=17, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xd000, size 8, enabled pcib0: matched entry for 0.17.INTC pcib0: slot 17 INTC hardwired to IRQ 22 found-> vendor=0x1022, dev=0x1100, revid=0x00 domain=0, bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1101, revid=0x00 domain=0, bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1102, revid=0x00 domain=0, bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1103, revid=0x00 domain=0, bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) agp0.pci0.pcib0.acpi0.nexus0.root0 agp0: [tentative] mem 0xe0000000-0xe7ffffff at device 0.0 on pci0 agp0: 1 Miscellaneous Control unit(s) found. agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xe0000000 agp0: allocating GATT for aperture of size 128M agp0: [attached!] mem 0xe0000000-0xe7ffffff at device 0.0 on pci0 pcib1.pci0.pcib0.acpi0.nexus0.root0 pcib1: [tentative] at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xb000-0xbfff pcib1: memory decode 0xf8000000-0xf80fffff pcib1: prefetched decode 0xe8000000-0xf7ffffff pci1.pcib1.pci0.pcib0.acpi0.nexus0.root0 pci1: [tentative] on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x1002, dev=0x5961, revid=0x01 domain=0, bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Prefetchable Memory, range 32, base 0xe8000000, size 27, enabled pcib1: requested memory range 0xe8000000-0xefffffff: good map[14]: type I/O Port, range 32, base 0xb000, size 8, enabled pcib1: requested I/O range 0xb000-0xb0ff: in range map[18]: type Memory, range 32, base 0xf8030000, size 16, enabled pcib1: requested memory range 0xf8030000-0xf803ffff: good MPTABLE: fixed interrupt routing for 1:0 INTA MPTABLE: 1:0 INTA routed to irq 5 IOAPIC: irq 5, gsi 5 edge/high -> level/low found-> vendor=0x1002, dev=0x5941, revid=0x01 domain=0, bus=1, slot=0, func=1 class=03-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Prefetchable Memory, range 32, base 0xf0000000, size 27, memory disabled pcib1: requested memory range 0xf0000000-0xf7ffffff: good map[14]: type Memory, range 32, base 0xf8020000, size 16, enabled pcib1: requested memory range 0xf8020000-0xf802ffff: good vgapci0.pci1.pcib1.pci0.pcib0.acpi0.nexus0.root0 vgapci0: [tentative] port 0xb000-0xb0ff mem 0xf8030000-0xf803ffff,0xe8000000-0xefffffff irq 5 at device 0.0 on pci1 vgapci0: [attached!] port 0xb000-0xb0ff mem 0xf8030000-0xf803ffff,0xe8000000-0xefffffff irq 5 at device 0.0 on pci1 vgapci1.pci1.pcib1.pci0.pcib0.acpi0.nexus0.root0 vgapci1: [tentative] mem 0xf8020000-0xf802ffff,0xf0000000-0xf7ffffff at device 0.1 on pci1 vgapci1: [attached!] mem 0xf8020000-0xf802ffff,0xf0000000-0xf7ffffff at device 0.1 on pci1 pci1: [attached!] on pcib1 pcib1: [attached!] at device 1.0 on pci0 fwohci0.pci0.pcib0.acpi0.nexus0.root0 fwohci0: [tentative] port 0xdd00-0xdd7f mem 0xf812c000-0xf812c7ff irq 23 at device 7.0 on pci0 fwohci0: latency timer 32 -> 32. fwohci0: cache size 0 -> 8. fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xf812c000 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 00:50:8d:00:00:ee:25:a2 fwohci0: resetting OHCI...done (loop=0) fwohci0: fwphy_rddata: 0x2 loop=1, retry=0 fwohci0: fwphy_rddata: 0x3 loop=1, retry=0 fwohci0: Phy 1394a available S400, 3 ports. fwohci0: fwphy_rddata: 0x5 loop=1, retry=0 fwohci0: Enable 1394a Enhancements fwohci0: fwphy_rddata: 0x5 loop=1, retry=0 fwohci0: fwphy_rddata: 0x2 loop=1, retry=0 fwohci0: fwphy_rddata: 0x4 loop=1, retry=0 fwohci0: fwphy_rddata: 0x4 loop=1, retry=0 fwohci0: fwphy_rddata: 0x4 loop=1, retry=0 fwohci0: Link S400, max_rec 2048 bytes. fwohci0: BUS_OPT 0xf800a202 -> 0xf800a202 fwohci0: fwohci_set_intr: 1 firewire0.fwohci0.pci0.pcib0.acpi0.nexus0.root0 firewire0: [tentative] on fwohci0 fwe0.firewire0.fwohci0.pci0.pcib0.acpi0.nexus0.root0 fwe0: [tentative] on firewire0 fwe0: bpf attached fwe0: MAC address: 02:50:8d:ee:25:a2 fwe0: [attached!] on firewire0 sbp0.firewire0.fwohci0.pci0.pcib0.acpi0.nexus0.root0 sbp0: [tentative] on firewire0 sbp_attach (cold=1) sbp0: [attached!] on firewire0 sbp_post_busreset fwohci0: Initiate bus reset fwohci0: fwphy_rddata: 0x1 loop=1, retry=0 fwohci0: fwphy_rddata: 0x1 loop=1, retry=0 firewire0: [attached!] on fwohci0 fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) fwohci0: fw_set_bus_manager: 0->0 (loop=0) firewire0: bus manager 0 (me) send phy_config root_node=-1 gap_count=5 fwohci0: maxdesc: 2 fwohci0: start AT DMA status=0 fwohci0: [attached!] port 0xdd00-0xdd7f mem 0xf812c000-0xf812c7ff irq 23 at device 7.0 on pci0 pcm0.pci0.pcib0.acpi0.nexus0.root0 pcm0: [tentative] port 0xe300-0xe31f irq 17 at device 9.0 on pci0 pcm0: Reserved 0x20 bytes for rid 0x10 type 4 at 0xe300 emu: setmap (700f8000, 800), nseg=1, error=0 emu: setmap (704f9000, 1000), nseg=1, error=0 pcm0: pcm0: Codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement pcm0: Primary codec extended features surround DAC pcm0: ac97 codec dac ready count: 0 pcm0: Mixer "vol": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "line": pcm0: Mixer "mic": pcm0: Mixer "cd": pcm0: Mixer "rec": pcm0: Mixer "igain": pcm0: Mixer "ogain": pcm0: Mixer "line1": pcm0: Mixer "phin": pcm0: Mixer "phout": pcm0: Mixer "video": Current DB 0 ch = 0 Current OP KEY INT BR len Addr Depend Stat: Cnt 78667000 OUTL ST2 ALL ALL 12 00000000 78667080 8411:0005 RUN,ACTIVE, ack complete(11) 0x000000e0 0x00450000 0xffbaffff 0x00000000 emu: setmap (704fb000, 1000), nseg=1, error=0 emu: setmap (704fd000, 1000), nseg=1, error=0 emu: setmap (705ff000, 1000), nseg=1, error=0 emu: setmap (6de62000, 1000), nseg=1, error=0 pcm0: sndbuf_setmap 6dee4000, 1000; 0xffffffe01db24000 -> 6dee4000 pcm0: sndbuf_setmap 6ece6000, 1000; 0xffffffe01db26000 -> 6ece6000 pcm0: [attached!] port 0xe300-0xe31f irq 17 at device 9.0 on pci0 ral0.pci0.pcib0.acpi0.nexus0.root0 ral0: [tentative] mem 0xf8120000-0xf8127fff irq 18 at device 10.0 on pci0 ral0: Reserved 0x8000 bytes for rid 0x10 type 3 at 0xf8120000 ral0: MAC/BBP RT2561C, RF RT2527 boundary check failed boundary check failed boundary check failed boundary check failed boundary check failed ral0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ral0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ral0: [attached!] mem 0xf8120000-0xf8127fff irq 18 at device 10.0 on pci0 rl0.pci0.pcib0.acpi0.nexus0.root0 rl0: [tentative] port 0xc000-0xc0ff mem 0xf8128000-0xf81280ff irq 19 at device 11.0 on pci0 rl0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc000 miibus0.rl0.pci0.pcib0.acpi0.nexus0.root0 miibus0: [tentative] on rl0 rlphy0.miibus0.rl0.pci0.pcib0.acpi0.nexus0.root0 rlphy0: [tentative] on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rlphy0: [attached!] on miibus0 miibus0: [attached!] on rl0 rl0: bpf attached rl0: MAC address: 00:30:f1:28:9b:fa rl0: [attached!] port 0xc000-0xc0ff mem 0xf8128000-0xf81280ff irq 19 at device 11.0 on pci0 rl1.pci0.pcib0.acpi0.nexus0.root0 rl1: [tentative] port 0xc400-0xc4ff mem 0xf8129000-0xf81290ff irq 20 at device 12.0 on pci0 rl1: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc400 miibus1.rl1.pci0.pcib0.acpi0.nexus0.root0 miibus1: [tentative] on rl1 rlphy1.miibus1.rl1.pci0.pcib0.acpi0.nexus0.root0 rlphy1: [tentative] on miibus1 rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rlphy1: [attached!] on miibus1 miibus1: [attached!] on rl1 rl1: bpf attached rl1: MAC address: 00:0a:cd:0c:ae:68 rl1: [attached!] port 0xc400-0xc4ff mem 0xf8129000-0xf81290ff irq 20 at device 12.0 on pci0 vge0.pci0.pcib0.acpi0.nexus0.root0 vge0: [tentative] port 0xc800-0xc8ff mem 0xf812a000-0xf812a0ff irq 22 at device 14.0 on pci0 vge0: Reserved 0x100 bytes for rid 0x14 type 3 at 0xf812a000 miibus2.vge0.pci0.pcib0.acpi0.nexus0.root0 miibus2: [tentative] on vge0 ciphy0.miibus2.vge0.pci0.pcib0.acpi0.nexus0.root0 ciphy0: [tentative] on miibus2 ciphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ciphy0: [attached!] on miibus2 miibus2: [attached!] on vge0 bus_explore done sbp_post_explore vge0: bpf attached vge0: MAC address: 00:50:8d:ef:25:a2 vge0: [attached!] port 0xc800-0xc8ff mem 0xf812a000-0xf812a0ff irq 22 at device 14.0 on pci0 atapci0.pci0.pcib0.acpi0.nexus0.root0 atapci0: [tentative] port 0xcc00-0xccff,0xdc00-0xdc0f,0xdb00-0xdb03,0xda00-0xda07,0xd900-0xd903,0xd800-0xd807 irq 20 at device 15.0 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xdc00 atapci0: Reserved 0x100 bytes for rid 0x24 type 4 at 0xcc00 ata2.atapci0.pci0.pcib0.acpi0.nexus0.root0 ata2: [tentative] on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xd800 atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xd900 ata2: SATA connect time=0ms ata2: reset tp1 mask=01 ostat0=50 ostat1=00 ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1 ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire No policy for ad4 specified, or policy not found disk scheduler: set policy of ad4 to noop ad4: VIA check1 failed ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed ad4: LSI (v2) check1 failed ad4: FreeBSD check1 failed ad4: 953869MB at ata2-master SATA150 ad4: 1953525168 sectors [1938021C/16H/63S] 16 sectors/interrupt 1 depth queue ata2: [attached!] on atapci0 ata3.atapci0.pci0.pcib0.acpi0.nexus0.root0 ata3: [tentative] on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xda00 atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xdb00 ata3: SATA connect time=0ms ata3: reset tp1 mask=01 ostat0=50 ostat1=00 ata3: stat0=0xd0 err=0x00 lsb=0x10 msb=0x00 ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 stat0=50 stat1=00 devices=0x1 ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire No policy for ad6 specified, or policy not found disk scheduler: set policy of ad6 to noop ad4: type 0xa5, start 63, end = 1953520127, size 1953520065 : OK ad6: VIA check1 failed ad6: Adaptec check1 failed ad6: LSI (v3) check1 failed ad6: LSI (v2) check1 failed ad6: FreeBSD check1 failed ad6: 238475MB at ata3-master SATA150 ad6: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue ata3: [attached!] on atapci0 atapci0: [attached!] port 0xcc00-0xccff,0xdc00-0xdc0f,0xdb00-0xdb03,0xda00-0xda07,0xd900-0xd903,0xd800-0xd807 irq 20 at device 15.0 on pci0 atapci1.pci0.pcib0.acpi0.nexus0.root0 atapci1: [tentative] port 0xde00-0xde0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xde00 ata0.atapci1.pci0.pcib0.acpi0.nexus0.root0 ata0: [tentative] on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=60 ostat1=70 ata0: stat0=0x20 err=0x20 lsb=0x20 msb=0x20 ata0: stat1=0x30 err=0x30 lsb=0x30 msb=0x30 ata0: reset tp2 stat0=20 stat1=30 devices=0x0 ata0: [attached!] on atapci1 ata1.atapci1.pci0.pcib0.acpi0.nexus0.root0 ata1: [tentative] on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=60 ostat1=70 ata1: stat0=0x20 err=0x20 lsb=0x20 msb=0x20 ata1: stat1=0x30 err=0x30 lsb=0x30 msb=0x30 ata1: reset tp2 stat0=20 stat1=30 devices=0x0 ata1: [attached!] on atapci1 atapci1: [attached!] port 0xde00-0xde0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0 uhci0.pci0.pcib0.acpi0.nexus0.root0 uhci0: [tentative] port 0xdf00-0xdf1f irq 21 at device 16.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xdf00 usb0.uhci0.pci0.pcib0.acpi0.nexus0.root0 usb0: [tentative] on uhci0 usb0: USB revision 1.0 uhub0.usb0.uhci0.pci0.pcib0.acpi0.nexus0.root0 uhub0: [tentative] on usb0 uhub0: 2 ports with 2 removable, self powered uhub0: [attached!] on usb0 usb0: [attached!] on uhci0 uhci0: [attached!] port 0xdf00-0xdf1f irq 21 at device 16.0 on pci0 uhci1.pci0.pcib0.acpi0.nexus0.root0 uhci1: [tentative] port 0xe000-0xe01f irq 21 at device 16.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe000 usb1.uhci1.pci0.pcib0.acpi0.nexus0.root0 usb1: [tentative] on uhci1 usb1: USB revision 1.0 uhub1.usb1.uhci1.pci0.pcib0.acpi0.nexus0.root0 uhub1: [tentative] on usb1 uhub1: 2 ports with 2 removable, self powered uhub1: [attached!] on usb1 usb1: [attached!] on uhci1 uhci1: [attached!] port 0xe000-0xe01f irq 21 at device 16.1 on pci0 uhci2.pci0.pcib0.acpi0.nexus0.root0 uhci2: [tentative] port 0xe100-0xe11f irq 21 at device 16.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe100 usb2.uhci2.pci0.pcib0.acpi0.nexus0.root0 usb2: [tentative] on uhci2 usb2: USB revision 1.0 uhub2.usb2.uhci2.pci0.pcib0.acpi0.nexus0.root0 uhub2: [tentative] on usb2 uhub2: 2 ports with 2 removable, self powered uhub2: [attached!] on usb2 usb2: [attached!] on uhci2 uhci2: [attached!] port 0xe100-0xe11f irq 21 at device 16.2 on pci0 uhci3.pci0.pcib0.acpi0.nexus0.root0 uhci3: [tentative] port 0xe200-0xe21f irq 21 at device 16.3 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe200 usb3.uhci3.pci0.pcib0.acpi0.nexus0.root0 usb3: [tentative] on uhci3 usb3: USB revision 1.0 uhub3.usb3.uhci3.pci0.pcib0.acpi0.nexus0.root0 uhub3: [tentative] on usb3 uhub3: 2 ports with 2 removable, self powered uhub3: [attached!] on usb3 usb3: [attached!] on uhci3 uhci3: [attached!] port 0xe200-0xe21f irq 21 at device 16.3 on pci0 ehci0.pci0.pcib0.acpi0.nexus0.root0 ehci0: [tentative] mem 0xf812b000-0xf812b0ff irq 21 at device 16.4 on pci0 ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xf812b000 ehci0: Dropped interrupts workaround enabled usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4.ehci0.pci0.pcib0.acpi0.nexus0.root0 usb4: [tentative] on ehci0 usb4: USB revision 2.0 uhub4.usb4.ehci0.pci0.pcib0.acpi0.nexus0.root0 uhub4: [tentative] on usb4 uhub4: 8 ports with 8 removable, self powered uhub4: [attached!] on usb4 usb4: [attached!] on ehci0 ehci0: [attached!] mem 0xf812b000-0xf812b0ff irq 21 at device 16.4 on pci0 isab0.pci0.pcib0.acpi0.nexus0.root0 isab0: [tentative] at device 17.0 on pci0 isa0.isab0.pci0.pcib0.acpi0.nexus0.root0 isa0: [tentative] on isab0 isa0: [attached!] on isab0 isab0: [attached!] at device 17.0 on pci0 pci0: (vendor 0x1106, dev 0x3059) at device 17.5 irq 22 pci0: [attached!] on pcib0 pcib0: [attached!] port 0xcf8-0xcff on acpi0 unknown: not probed (disabled) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: irq maps: 0x11 0x11 0x11 0x11 sio0.acpi0.nexus0.root0 sio0: <16550A-compatible COM port> [tentative] port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio0: <16550A-compatible COM port> [attached!] port 0x3f8-0x3ff irq 4 on acpi0 unknown: not probed (disabled) unknown: not probed (disabled) ppc0: using extended I/O port range ppc0: SPP ppc0.acpi0.nexus0.root0 ppc0: [tentative] port 0x778-0x77b,0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0.ppc0.acpi0.nexus0.root0 ppbus0: [tentative] on ppc0 plip0.ppbus0.ppc0.acpi0.nexus0.root0 plip0: [tentative] on ppbus0 lp0: bpf attached plip0: [attached!] on ppbus0 lpt0.ppbus0.ppc0.acpi0.nexus0.root0 lpt0: [tentative] on ppbus0 lpt0: Interrupt-driven port lpt0: [attached!] on ppbus0 ppi0.ppbus0.ppc0.acpi0.nexus0.root0 ppi0: [tentative] on ppbus0 ppi0: [attached!] on ppbus0 ppbus0: [attached!] on ppc0 ppc0: [attached!] port 0x778-0x77b,0x378-0x37f irq 7 on acpi0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) cpu0.acpi0.nexus0.root0 cpu0: [tentative] on acpi0 cpu_cst0.cpu0.acpi0.nexus0.root0 cpu_cst0: [tentative] on cpu0 cpu_cst0: switching to generic Cx mode cpu_cst0: [attached!] on cpu0 cpu_pst0.cpu0.acpi0.nexus0.root0 cpu_pst0: [tentative] on cpu0 cpu_pst0: control reg 127 0 cpu_pst0: status reg 127 0 cpu_pst0: freq 1800, pwr 67000, xlat 100, blat 9, cv e020298a, sv 0000018a cpu_pst0: freq 1000, pwr 21000, xlat 100, blat 9, cv e0202c82, sv 00000482 cpu_pst0: _PPC 0 cpu_pst0: [attached!] on cpu0 cpu0: [attached!] on acpi0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) acpi0: [attached!] at port 0x10-0x1f,0x22-0x3f,0x44-0x5f,0x62-0x63,0x65-0x6f,0x74-0x7f,0x91-0x93,0xa2-0xbf,0xe0-0xef,0xb78-0xb7b,0xf78-0xf7b,0xa78-0xa7b,0xe78-0xe7b,0xbbc-0xbbf,0xfbc-0xfbf,0x4d0-0x4d1,0x290-0x297,0x4000-0x407f,0x5000-0x500f iomem 0xcc000-0xcffff,0xd9000-0xdbfff,0xf0000-0xfbfff,0xfc000-0xfffff,0x7ff00000-0x7fffffff,0x7fef0000-0x7fefffff,0xffff0000-0xffffffff,0-0x9ffff,0x100000-0x7feeffff,0xfec00000-0xfec00fff,0xfee00000-0xfee00fff,0xfff80000-0xfffeffff irq 9 on motherboard sio-: sio0 exists, using next available unit number sio-: sio1 exists, using next available unit number sio-: sio2 exists, using next available unit number sio-: sio3 exists, using next available unit number ppc-: ppc0 exists, using next available unit number Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 aps_identify: will specify the port ex_isa_identify() isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0 orm0: