Copyright (c) 2003-2009 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly 2.3.1-DEVELOPMENT #7: Tue May 19 16:25:52 CEST 2009
    hofmann@blob.baaderstrasse.com:/hammer/usr/obj/hammer/usr/src/sys/T42
Calibrating clock(s) ... TSC clock: 1798444036 Hz, i8254 clock: 1193163 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Intel(R) Pentium(R) M processor 1.80GHz (1798.48-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6d6  Stepping = 6
  Features=0xafe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
  Features2=0x180<EST,TM2>
real memory  = 1609957376 (1572224K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x005b1000 - 0x5ff4ffff, 1603923968 bytes (391583 pages)
avail memory = 1552510976 (1516124K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f6d20
bios32: Entry = 0xfd750 (c00fd750)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0x1f6
pnpbios: Found PnP BIOS data at 0xc00f6da0
pnpbios: Entry = f0000:b616  Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
Preloaded elf kernel "/boot/kernel" at 0xc0584000.
Preloaded elf module "/boot/modules/if_iwi.ko" at 0xc058424c.
Preloaded elf module "/boot/modules/snd_ich.ko" at 0xc05842f8.
Preloaded elf module "/boot/modules/sound.ko" at 0xc05843a8.
Preloaded elf module "/boot/modules/usb.ko" at 0xc0584454.
Preloaded elf module "/boot/modules/umass.ko" at 0xc0584500.
Preloaded elf module "/boot/modules/ehci.ko" at 0xc05845ac.
Preloaded elf module "/boot/modules/est.ko" at 0xc0584658.
Enhanced SpeedStep (860 mV) 1800 MHz
Enhanced SpeedStep frequencies available (MHz): 1800 1600 1400 1200 1000 800 600
wlan: <802.11 Link Layer>
crypto: <crypto core>
Pentium Pro MTRR support enabled
md0: Malloc disk
Math emulator present
pci_open(1):	mode 1 addr port (0x0cf8) is 0x8000f904
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=33408086)
pcibios: BIOS version 2.10
Using $PIR table, 15 entries at 0xc00fdea0
PCI-Only Interrupts: none
Location  Bus Device Pin  Link  IRQs
embedded    0    0    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0    0    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    0    0    C   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0    0    D   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    0    2    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0    2    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    1    0    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    1    0    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    0   30    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0   30    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    0   30    C   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0   30    D   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    2    0    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    2    0    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    2    0    C   0x62  3 4 5 6 7 9 10 11 12 14 15
slot 1      2    2    A   0x62  3 4 5 6 7 9 10 11 12 14 15
slot 1      2    2    B   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    2    3    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    2    3    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    2    3    C   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    2    3    D   0x63  3 4 5 6 7 9 10 11 12 14 15
slot 2      9    0    A   0x60  3 4 5 6 7 9 10 11 12 14 15
slot 2      9    0    B   0x61  3 4 5 6 7 9 10 11 12 14 15
slot 2      9    0    C   0x62  3 4 5 6 7 9 10 11 12 14 15
slot 2      9    0    D   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    9    1    A   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    9    2    A   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    9    2    B   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    2    1    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    2    8    A   0x68  3 4 5 6 7 9 10 11 12 14 15
embedded    0   29    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0   29    B   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    0   29    C   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0   29    D   0x6b  3 4 5 6 7 9 10 11 12 14 15
embedded    0   31    A   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0   31    B   0x61  3 4 5 6 7 9 10 11 12 14 15
npx0.nexus0.root0
npx0: <math processor> [tentative] on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
npx0: <math processor> [attached!] on motherboard
legacypci0.nexus0.root0
legacypci0 [tentative] on motherboard
pcib0.legacypci0.nexus0.root0
pcib0: <Host to PCI bridge> [tentative] on legacypci0
pci0.pcib0.legacypci0.nexus0.root0
pci0: <PCI bus> [tentative] on pcib0
pci0: pci_attach() physical bus=0
	map[10]: type 1, range 32, base d0000000, size 28
found->	vendor=0x8086, dev=0x3340, revid=0x03
	bus=0, slot=0, func=0
	class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
found->	vendor=0x8086, dev=0x3341, revid=0x03
	bus=0, slot=1, func=0
	class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=0
	subordinatebus=1 	secondarybus=1
	map[20]: type 1, range 32, base 00001800, size  5
found->	vendor=0x8086, dev=0x24c2, revid=0x01
	bus=0, slot=29, func=0
	class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
	map[20]: type 1, range 32, base 00001820, size  5
found->	vendor=0x8086, dev=0x24c4, revid=0x01
	bus=0, slot=29, func=1
	class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=b, irq=11
	map[20]: type 1, range 32, base 00001840, size  5
found->	vendor=0x8086, dev=0x24c7, revid=0x01
	bus=0, slot=29, func=2
	class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=c, irq=11
	map[10]: type 1, range 32, base c0000000, size 10
found->	vendor=0x8086, dev=0x24cd, revid=0x01
	bus=0, slot=29, func=7
	class=[SERIALBUS]0c-03-20, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=d, irq=11
found->	vendor=0x8086, dev=0x2448, revid=0x81
	bus=0, slot=30, func=0
	class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=0
	subordinatebus=8 	secondarybus=2
found->	vendor=0x8086, dev=0x24cc, revid=0x01
	bus=0, slot=31, func=0
	class=[BRIDGE]06-01-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
	map[20]: type 1, range 32, base 00001860, size  4
found->	vendor=0x8086, dev=0x24ca, revid=0x01
	bus=0, slot=31, func=1
	class=[STORAGE]01-01-8a, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=255
	map[20]: type 1, range 32, base 00001880, size  5
found->	vendor=0x8086, dev=0x24c3, revid=0x01
	bus=0, slot=31, func=3
	class=[SERIALBUS]0c-05-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=b, irq=11
	map[10]: type 1, range 32, base 00001c00, size  8
	map[14]: type 1, range 32, base 000018c0, size  6
	map[18]: type 1, range 32, base c0000c00, size  9
	map[1c]: type 1, range 32, base c0000800, size  8
found->	vendor=0x8086, dev=0x24c5, revid=0x01
	bus=0, slot=31, func=5
	class=[MULTIMEDIA]04-01-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=b, irq=11
	map[10]: type 1, range 32, base 00002400, size  8
	map[14]: type 1, range 32, base 00002000, size  7
found->	vendor=0x8086, dev=0x24c6, revid=0x01
	bus=0, slot=31, func=6
	class=[SIMPLECOMM]07-03-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=b, irq=11
agp0.pci0.pcib0.legacypci0.nexus0.root0
agp0: <Intel 82855 host to AGP bridge> [tentative] mem 0xd0000000-0xdfffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 256M
agp0: <Intel 82855 host to AGP bridge> [attached!] mem 0xd0000000-0xdfffffff at device 0.0 on pci0
pcib1.pci0.pcib0.legacypci0.nexus0.root0
pcib1: <PCI to PCI bridge (vendor=8086 device=3341)> [tentative] at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x3000-0x3fff
pcib1:   memory decode     0xc0100000-0xc01fffff
pcib1:   prefetched decode 0xe0000000-0xe7ffffff
pci1.pcib1.pci0.pcib0.legacypci0.nexus0.root0
pci1: <PCI bus> [tentative] on pcib1
pci1: pci_attach() physical bus=1
	map[10]: type 1, range 32, base e0000000, size 27
	map[14]: type 1, range 32, base 00003000, size  8
	map[18]: type 1, range 32, base c0100000, size 16
found->	vendor=0x1002, dev=0x4e54, revid=0x80
	bus=1, slot=0, func=0
	class=[DISPLAY]03-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
drm0.pci1.pcib1.pci0.pcib0.legacypci0.nexus0.root0
drm0: <ATI FireGL T2/T2e> [tentative] port 0x3000-0x30ff mem 0xc0100000-0xc010ffff,0xe0000000-0xe7ffffff irq 11 at device 0.0 on pci1
pcib1: device drm0 requested decoded memory range 0xc0100000-0xc010ffff
info: [drm] AGP at 0xd0000000 256MB
info: [drm] Initialized radeon 1.29.0 20080528
drm0: <ATI FireGL T2/T2e> [attached!] port 0x3000-0x30ff mem 0xc0100000-0xc010ffff,0xe0000000-0xe7ffffff irq 11 at device 0.0 on pci1
pci1: <PCI bus> [attached!] on pcib1
pcib1: <PCI to PCI bridge (vendor=8086 device=3341)> [attached!] at device 1.0 on pci0
uhci0.pci0.pcib0.legacypci0.nexus0.root0
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> [tentative] port 0x1800-0x181f irq 11 at device 29.0 on pci0
usb0.uhci0.pci0.pcib0.legacypci0.nexus0.root0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> [tentative] on uhci0
usb0: USB revision 1.0
uhub0.usb0.uhci0.pci0.pcib0.legacypci0.nexus0.root0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb0
uhub0: 2 ports with 2 removable, self powered
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> [attached!] on uhci0
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> [attached!] port 0x1800-0x181f irq 11 at device 29.0 on pci0
uhci1.pci0.pcib0.legacypci0.nexus0.root0
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> [tentative] port 0x1820-0x183f irq 11 at device 29.1 on pci0
usb1.uhci1.pci0.pcib0.legacypci0.nexus0.root0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> [tentative] on uhci1
usb1: USB revision 1.0
uhub1.usb1.uhci1.pci0.pcib0.legacypci0.nexus0.root0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb1
uhub1: 2 ports with 2 removable, self powered
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb1
usb1: <Intel 82801DB (ICH4) USB controller USB-B> [attached!] on uhci1
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> [attached!] port 0x1820-0x183f irq 11 at device 29.1 on pci0
uhci2.pci0.pcib0.legacypci0.nexus0.root0
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> [tentative] port 0x1840-0x185f irq 11 at device 29.2 on pci0
usb2.uhci2.pci0.pcib0.legacypci0.nexus0.root0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> [tentative] on uhci2
usb2: USB revision 1.0
uhub2.usb2.uhci2.pci0.pcib0.legacypci0.nexus0.root0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb2
uhub2: 2 ports with 2 removable, self powered
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb2
usb2: <Intel 82801DB (ICH4) USB controller USB-C> [attached!] on uhci2
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> [attached!] port 0x1840-0x185f irq 11 at device 29.2 on pci0
ehci0.pci0.pcib0.legacypci0.nexus0.root0
ehci0: <Intel 82801DB/L/M USB 2.0 controller> [tentative] mem 0xc0000000-0xc00003ff irq 11 at device 29.7 on pci0
ehci0: probing asynchronously
pcib2.pci0.pcib0.legacypci0.nexus0.root0
pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> [tentative] at device 30.0 on pci0
pcib2:   secondary bus     2
pcib2:   subordinate bus   8
pcib2:   I/O decode        0x4000-0x8fff
pcib2:   memory decode     0xc0200000-0xcfffffff
pcib2:   prefetched decode 0xe8000000-0xefffffff
pcib2:   Subtractively decoded bridge.
pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
pci2: <PCI bus> [tentative] on pcib2
pci2: pci_attach() physical bus=2
	map[10]: type 1, range 32, base b0000000, size 12
found->	vendor=0x104c, dev=0xac46, revid=0x01
	bus=2, slot=0, func=0
	class=[BRIDGE]06-07-00, hdrtype=0x02, mfdev=1
	subordinatebus=5 	secondarybus=3
	intpin=a, irq=11
	map[10]: type 1, range 32, base b1000000, size 12
found->	vendor=0x104c, dev=0xac46, revid=0x01
	bus=2, slot=0, func=1
	class=[BRIDGE]06-07-00, hdrtype=0x02, mfdev=1
	subordinatebus=8 	secondarybus=6
	intpin=b, irq=11
	map[10]: type 1, range 32, base c0220000, size 17
	map[14]: type 1, range 32, base c0200000, size 16
	map[18]: type 1, range 32, base 00008000, size  6
found->	vendor=0x8086, dev=0x101e, revid=0x03
	bus=2, slot=1, func=0
	class=[NETWORK]02-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
	map[10]: type 1, range 32, base c0214000, size 12
found->	vendor=0x8086, dev=0x4220, revid=0x05
	bus=2, slot=2, func=0
	class=[NETWORK]02-80-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
pci2: <PCI to CardBus bridge (vendor=104c device=ac46)> (vendor=0x104c, dev=0xac46) at 0.0 irq 11
pci2: <PCI to CardBus bridge (vendor=104c device=ac46)> (vendor=0x104c, dev=0xac46) at 0.1 irq 11
pci2: <unknown card> (vendor=0x8086, dev=0x101e) at 1.0 irq 11
pci2:1:0: Transition from D0 to D3
iwi0.pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
iwi0: <Intel(R) PRO/Wireless 2200BG> [tentative] mem 0xc0214000-0xc0214fff irq 11 at device 2.0 on pci2
pcib2: device iwi0 requested decoded memory range 0xc0214000-0xc0214fff
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: (null) (null) (null)
usb3.ehci0.pci0.pcib0.legacypci0.nexus0.root0
usb3: <Intel 82801DB/L/M USB 2.0 controller> [tentative] on ehci0
usb3: USB revision 2.0
uhub3.usb3.ehci0.pci0.pcib0.legacypci0.nexus0.root0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> [tentative] on usb3
uhub3: 6 ports with 6 removable, self powered
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> [attached!] on usb3
usb3: <Intel 82801DB/L/M USB 2.0 controller> [attached!] on ehci0
ehci0: <Intel 82801DB/L/M USB 2.0 controller> [attached!] mem 0xc0000000-0xc00003ff irq 11 at device 29.7 on pci0
iwi0: bpf attached
iwi0: MAC address: 00:16:6f:64:b3:47
iwi0: bpf attached
iwi0: bpf attached
iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwi0: <Intel(R) PRO/Wireless 2200BG> [attached!] mem 0xc0214000-0xc0214fff irq 11 at device 2.0 on pci2
pci2: <PCI bus> [attached!] on pcib2
pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> [attached!] at device 30.0 on pci0
isab0.pci0.pcib0.legacypci0.nexus0.root0
isab0: <PCI to ISA bridge (vendor=8086 device=24cc)> [tentative] at device 31.0 on pci0
isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
isa0: <ISA bus> [tentative] on isab0
isa0: <ISA bus> [attached!] on isab0
isab0: <PCI to ISA bridge (vendor=8086 device=24cc)> [attached!] at device 31.0 on pci0
atapci0.pci0.pcib0.legacypci0.nexus0.root0
atapci0: <Intel ICH4 UDMA100 controller> [tentative] port 0x1860-0x186f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata0: <ATA channel 0> [tentative] on atapci0
atapci0: reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: setting PIO4 on ICH4 chip
ad0: setting UDMA100 on ICH4 chip
ad0: Intel check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ad0: 238475MB <WDC WD2500BEVE-00WZT0 01.01A01> at ata0-master UDMA100
ad0: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue
ata0: <ATA channel 0> [attached!] on atapci0
ata1.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata1: <ATA channel 1> [tentative] on atapci0
atapci0: reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: reiniting channel ..
ata1: reset tp1 mask=03 ostat0=00 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: reinit done ..
ata1: reiniting channel ..
ata1: reset tp1 mask=03 ostat0=00 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: reinit done ..
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on ICH4 chip
acd0: setting UDMA33 on ICH4 chip
acd0: <MATSHITADVD-RAM UJ-812/K103> DVDR drive at ata1 as master
acd0: read 4134KB/s (4134KB/s) write 2755KB/s (2755KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata1: <ATA channel 1> [attached!] on atapci0
atapci0: <Intel ICH4 UDMA100 controller> [attached!] port 0x1860-0x186f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
pci0: <unknown card> (vendor=0x8086, dev=0x24c3) at 31.3 irq 11
pcm0.pci0.pcib0.legacypci0.nexus0.root0
pcm0: <Intel ICH4 (82801DB)> [tentative] port 0x18c0-0x18ff,0x1c00-0x1cff mem 0xc0000800-0xc00008ff,0xc0000c00-0xc0000dff irq 11 at device 31.5 on pci0
pcm0: <Analog Devices AD1981B AC97 Codec (id = 0x41445374)>
pcm0: Codec features headphone, 20 bit DAC, 5 bit master volume, no 3D Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, AMAP, reserved 4
pcm0: ac97 codec dac ready count: 0
pcm0: Mixer "vol":
pcm0: Mixer "pcm":
pcm0: Mixer "line":
pcm0: Mixer "mic":
pcm0: Mixer "cd":
pcm0: Mixer "rec":
pcm0: Mixer "igain":
pcm0: Mixer "ogain":
pcm0: Mixer "line1":
pcm0: Mixer "phin":
pcm0: Mixer "phout":
pcm0: sndbuf_setmap 6e000, 4000; 0xd6f0f000 -> 6e000
pcm0: sndbuf_setmap 72000, 4000; 0xd6f17000 -> 72000
pcm0: <Intel ICH4 (82801DB)> [attached!] port 0x18c0-0x18ff,0x1c00-0x1cff mem 0xc0000800-0xc00008ff,0xc0000c00-0xc0000dff irq 11 at device 31.5 on pci0
pci0: <unknown card> (vendor=0x8086, dev=0x24c6) at 31.6 irq 11
pci0:31:6: Transition from D0 to D3
pci0: <PCI bus> [attached!] on pcib0
pcib0: <Host to PCI bridge> [attached!] on legacypci0
legacypci0 [attached!] on motherboard
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
orm0: <Option ROMs> [tentative] at iomem 0xc0000-0xcffff,0xdc000-0xdffff,0xe0000-0xeffff on isa0
orm0: <Option ROMs> [attached!] at iomem 0xc0000-0xcffff,0xdc000-0xdffff,0xe0000-0xeffff on isa0
atkbdc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
atkbdc0: <Keyboard controller (i8042)> [tentative] at port 0x60,0x64 on isa0
atkbd0.atkbdc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
atkbd0: <AT Keyboard> [tentative] flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x54ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
atkbd0: <AT Keyboard> [attached!] flags 0x1 irq 1 on atkbdc0
psm0: current command byte:0047
(probe0:ata1:0:0:0): error 22
(probe0:ata1:0:0:0): Unretryable Error
psm0.atkbdc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
psm0: <PS/2 Mouse> [tentative] irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
psm0: <PS/2 Mouse> [attached!] irq 12 on atkbdc0
atkbdc0: <Keyboard controller (i8042)> [attached!] at port 0x60,0x64 on isa0
vga0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 64 4f 4f 88 59 9e 
9a 1f 00 4f 0d 0e 00 00 07 80 92 83 8f 28 1f 8f 
9b a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 64 4f 4f 88 59 9e 
9a 1f 00 4f 0d 0e 00 00 07 80 92 83 8f 28 1f 8f 
9b a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
sc0: <System console> [tentative] at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sc0: <System console> [attached!] at flags 0x100 on isa0
sio0: can't drain, serial port might not exist, disabling
sio0 [tentative] failed to probe at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
sio1 [tentative] at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio1 [attached!] at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
cs0: not probed (disabled)
sn0: not probed (disabled)
isa_probe_children: probing PnP devices
BIOS Geometries:
 0:03feef3f 0..1022=1023 cylinders, 0..239=240 heads, 1..63=63 sectors
 0 accounted for
Device configuration finished.
lo0: bpf attached
ppp0: bpf attached
sl0: bpf attached
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
faith0: bpf attached
ip: MPSAFE
arp: MPSAFE
pcm0: measured ac97 link rate at 47995 Hz, will use 48000 Hz
(probe0:ata1:0:0:0): error 6
(probe0:ata1:0:0:0): Unretryable Error
(probe0:ata1:0:0:0): error 22
(probe0:ata1:0:0:0): Unretryable Error
pass0 at ata1 bus 0 target 0 lun 0
pass0: <MATSHITA DVD-RAM UJ-812 K103> Removable CD-ROM SCSI-0 device 
pass0: 33.000MB/s transfers
bootdev: a0200000 type=0 unit=0 slice=2 part=0 major=3
ATA PseudoRAID loaded
Mounting root from ufs:/dev/ad0s1a
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
cd0 at ata1 bus 0 target 0 lun 0
cd0: <MATSHITA DVD-RAM UJ-812 K103> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
ad0s1: type 0xa5, start 63, end = 488397167, size 488397105 : OK
start_init: trying /sbin/init
ipfw2 initialized, default to deny, logging disabled
Linux ELF exec handler installed
pcib1: device drm0 requested decoded memory range 0xe0000000-0xe7ffffff
agp0: Setting AGP v2 mode 4
info: [drm] Setting GART location based on new memory map
info: [drm] Loading R300 Microcode
info: [drm] Num pipes: 1
info: [drm] writeback test succeeded in 1 usecs