=> Bootstrap dependency digest>=20010302: found digest-20080510 WARNING: [bsd.prefs.mk] The package cal3d-examples-0.9.1nb2 misses DESTDIR support. WARNING: [license.mk] Every package should define a LICENSE. => Checksum SHA1 OK for TheCallyDemo-0.9.1b.zip => Checksum RMD160 OK for TheCallyDemo-0.9.1b.zip => Checksum SHA1 OK for cal3d-0.9.1.tar.bz2 => Checksum RMD160 OK for cal3d-0.9.1.tar.bz2 ===> Installing dependencies for cal3d-examples-0.9.1nb2 => Build dependency libtool-base>=1.5.22nb1: found libtool-base-1.5.26nb2 => Build dependency automake>=1.9: found automake-1.11 => Build dependency autoconf>=2.58: found autoconf-2.64 => Build dependency pax>=20040802: found pax-20080110 => Build dependency unzip-[0-9]*: found unzip-5.52nb4 => Build dependency dri2proto>=2.0: found dri2proto-2.1 => Build dependency glproto>=1.4.6: found glproto-1.4.10 => Build dependency damageproto>=1.1.0: found damageproto-1.1.0 => Build dependency xproto>=7.0.9: found xproto-7.0.15 => Build dependency fixesproto>=3.0.0: found fixesproto-4.0 => Build dependency xextproto>=7.0: found xextproto-7.0.5 => Build dependency inputproto>=1.4: found inputproto-1.5.1 => Build dependency kbproto>=1.0.2: found kbproto-1.0.3 => Build dependency xf86vidmodeproto>=2.2.1: found xf86vidmodeproto-2.2.2 => Build dependency xf86driproto>=2.0.3: found xf86driproto-2.0.4 => Build dependency checkperms>=1.1: found checkperms-1.10 => Full dependency cal3d>=0.9.1nb2: found cal3d-0.9.1nb2 => Full dependency MesaLib>=7.0.3: found MesaLib-7.4.4nb1 => Full dependency glu>=7.0.3: found glu-7.4.4nb2 => Full dependency glut>=7.0.3: found glut-7.4.4nb1 ===> Overriding tools for cal3d-examples-0.9.1nb2 ===> Extracting for cal3d-examples-0.9.1nb2 ===> Patching for cal3d-examples-0.9.1nb2 => Applying pkgsrc patches for cal3d-examples-0.9.1nb2 ===> Creating toolchain wrappers for cal3d-examples-0.9.1nb2 src=/usr/pkg/lib/pkgconfig/fixesproto.pc dst=/scratch/graphics/cal3d-examples/work/.buildlink/lib/pkgconfig/fixesext.pc; /bin/mkdir -p /scratch/graphics/cal3d-examples/work/.buildlink/lib/pkgconfig; if test -f ${src}; then /bin/ln -sf ${src} ${dst}; fi ===> Configuring for cal3d-examples-0.9.1nb2 cd /scratch/graphics/cal3d-examples/work/cal3d-0.9.1/examples/cally && ./autogen.sh Running aclocal ... acinclude.m4:13: warning: underquoted definition of CAL3D_CHECK_USER_CXX_FLAGS acinclude.m4:13: run info '(automake)Extending aclocal' acinclude.m4:13: or see http://sources.redhat.com/automake/automake.html#Extending-aclocal Running autoheader... Running automake ... Running autoconf ... cd /scratch/graphics/cal3d-examples/work/cal3d-0.9.1/examples/miniviewer_gl && ./autogen.sh Running aclocal ... acinclude.m4:13: warning: underquoted definition of CAL3D_CHECK_USER_CXX_FLAGS acinclude.m4:13: run info '(automake)Extending aclocal' acinclude.m4:13: or see http://sources.redhat.com/automake/automake.html#Extending-aclocal Running autoheader... Running automake ... Running autoconf ... /bin/chmod 755 /scratch/graphics/cal3d-examples/work/cal3d-0.9.1/tools/converter/autogen.sh /bin/chmod 755 /scratch/graphics/cal3d-examples/work/cal3d-0.9.1/tools/converter/install-sh cd /scratch/graphics/cal3d-examples/work/cal3d-0.9.1/tools/converter && ./autogen.sh Running aclocal ... acinclude.m4:13: warning: underquoted definition of CAL3D_CHECK_USER_CXX_FLAGS acinclude.m4:13: run info '(automake)Extending aclocal' acinclude.m4:13: or see http://sources.redhat.com/automake/automake.html#Extending-aclocal Running autoheader... Running automake ... Running autoconf ... => Modifying GNU configure scripts to avoid --recheck => Replacing config-guess with pkgsrc versions => Replacing config-sub with pkgsrc versions => Replacing install-sh with pkgsrc version => Checking for portability problems in extracted files configure: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used. checking build system type... i386-unknown-dragonfly2.3.2 checking host system type... i386-pc-dragonfly checking target system type... i386-pc-dragonfly checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether build environment is sane... yes checking for i386-pc-dragonfly-strip... no checking for strip... strip checking for a thread-safe mkdir -p... ./install-sh -c -d checking for gawk... /usr/bin/awk checking whether make sets $(MAKE)... yes checking whether user defined C++ flags overwrite the default Cal3D ones... yes checking whether to build Cal3D in debug mode... no checking for C++ compiler default output file name... a.out checking whether the C++ compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C++ compiler... yes checking whether c++ accepts -g... yes checking for style of include used by make... GNU checking dependency style of c++... gcc3 checking if /usr/pkg/include/cal3d/cal3d.h is available... yes checking if glut.h is available... yes checking for i386-pc-dragonfly-gcc... cc checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking dependency style of cc... gcc3 checking for CalModel_New in -lcal3d... yes checking for glBegin in -lGL... yes checking for gluLookAt in -lGLU... yes checking for glutInit in -lglut... yes configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating config.h config.status: executing depfiles commands o-----------------------------------------------------------o | To build and install The Cal3D Cally Demo type... | | make; make install | o-----------------------------------------------------------o configure: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used. checking build system type... i386-unknown-dragonfly2.3.2 checking host system type... i386-pc-dragonfly checking target system type... i386-pc-dragonfly checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether build environment is sane... yes checking for i386-pc-dragonfly-strip... no checking for strip... strip checking for a thread-safe mkdir -p... ./install-sh -c -d checking for gawk... /usr/bin/awk checking whether make sets $(MAKE)... yes checking whether user defined C++ flags overwrite the default Cal3D ones... yes checking whether to build Cal3D in debug mode... no checking for C++ compiler default output file name... a.out checking whether the C++ compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C++ compiler... yes checking whether c++ accepts -g... yes checking for style of include used by make... GNU checking dependency style of c++... gcc3 checking if /usr/pkg/include/cal3d/cal3d.h is available... yes checking if glut.h is available... yes checking for i386-pc-dragonfly-gcc... cc checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking dependency style of cc... gcc3 checking for glBegin in -lGL... yes checking for gluLookAt in -lGLU... yes checking for glutInit in -lglut... yes checking for CalModel_New in -lcal3d... yes configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating config.h config.status: executing depfiles commands o-----------------------------------------------------------o | To build and install the Cal3D miniviewer type... | | make; make install | o-----------------------------------------------------------o configure: WARNING: unrecognized options: --with-cal3d, --with-glut configure: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used. checking build system type... i386-unknown-dragonfly2.3.2 checking host system type... i386-pc-dragonfly checking target system type... i386-pc-dragonfly checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether build environment is sane... yes checking for i386-pc-dragonfly-strip... no checking for strip... strip checking for a thread-safe mkdir -p... ./install-sh -c -d checking for gawk... /usr/bin/awk checking whether make sets $(MAKE)... yes checking whether user defined C++ flags overwrite the default Cal3D ones... yes checking for C++ compiler default output file name... a.out checking whether the C++ compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C++ compiler... yes checking whether c++ accepts -g... yes checking for style of include used by make... GNU checking dependency style of c++... gcc3 checking for i386-pc-dragonfly-gcc... cc checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking dependency style of cc... gcc3 checking for CalModel_New in -lcal3d... yes checking whether to build Cal3D in debug mode... no configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating config.h config.status: executing depfiles commands configure: WARNING: unrecognized options: --with-cal3d, --with-glut o-----------------------------------------------------------o | To build and install the Cal3D converter type... | | make; make install | o-----------------------------------------------------------o => Modifying libtool scripts to use pkgsrc libtool => Substituting "c3" in /scratch/graphics/cal3d-examples/work/thecallydemo-0.9.1b/data/cally.cfg /scratch/graphics/cal3d-examples/work/thecallydemo-0.9.1b/data/paladin.cfg /scratch/graphics/cal3d-examples/work/thecallydemo-0.9.1b/data/skeleton.cfg WARNING: [subst.mk:c3] Ignoring non-existent file "/scratch/graphics/cal3d-examples/work/thecallydemo-0.9.1b/data/cally.cfg". WARNING: [subst.mk:c3] Ignoring non-existent file "/scratch/graphics/cal3d-examples/work/thecallydemo-0.9.1b/data/paladin.cfg". WARNING: [subst.mk:c3] Ignoring non-existent file "/scratch/graphics/cal3d-examples/work/thecallydemo-0.9.1b/data/skeleton.cfg".