=> Bootstrap dependency digest>=20010302: found digest-20080510 WARNING: [license.mk] Every package should define a LICENSE. => Checksum SHA1 OK for nucleo-0.7.1.tar.bz2 => Checksum RMD160 OK for nucleo-0.7.1.tar.bz2 ===> Installing dependencies for nucleo-0.7.1nb3 ========================================================================== The supported build options for nucleo are: gnutls The currently selected options are: gnutls You can select which build options to use by setting PKG_DEFAULT_OPTIONS or the following variable. Its current value is shown: PKG_OPTIONS.nucleo (not defined) ========================================================================== ========================================================================== The following variables will affect the build process of this package, nucleo-0.7.1nb3. Their current value is shown below: * BDB185_DEFAULT = db1 * BDB_DEFAULT = db4 * PYTHON_VERSION_DEFAULT = 25 Based on these variables, the following variables have been set: * BDBBASE = /usr * BDB_LIBS (defined, but empty) * BDB_TYPE = db1 * PYPACKAGE = python25 You may want to abort the process now with CTRL-C and change their value before continuing. Be sure to run `/usr/pkg/bin/bmake clean' after the changes. ========================================================================== => Build dependency libtool-base>=1.5.22nb1: found libtool-base-1.5.26nb1 => Build dependency gmake>=3.81: found gmake-3.81 => Build dependency pkg-config>=0.19: found pkg-config-0.23nb1 => Build dependency pax>=20040802: found pax-20080110 => Build dependency glproto>=1.4.6: found glproto-1.4.9nb1 => Build dependency damageproto>=1.1.0: found damageproto-1.1.0 => Build dependency xproto>=7.0.9: found xproto-7.0.15 => Build dependency fixesproto>=3.0.0: found fixesproto-4.0 => Build dependency xextproto>=7.0: found xextproto-7.0.5 => Build dependency inputproto>=1.4: found inputproto-1.5.0 => Build dependency kbproto>=1.0.2: found kbproto-1.0.3 => Build dependency xf86vidmodeproto>=2.2.1: found xf86vidmodeproto-2.2.2 => Build dependency xf86driproto>=2.0.3: found xf86driproto-2.0.4 => Build dependency libXt>=1.0.0: found libXt-1.0.5nb1 => Build dependency checkperms>=1.1: found checkperms-1.10 => Full dependency python25>=2.5.2: found python25-2.5.4 => Full dependency freetype2>=2.1.10nb1: found freetype2-2.3.9nb1 => Full dependency gd>=2.0.33nb3: found gd-2.0.35nb1 => Full dependency png>=1.2.9nb2: found png-1.2.35 => Full dependency glu>=7.0.3: found glu-7.0.4.1 => Full dependency libexif>=0.6.13nb1: found libexif-0.6.17nb1 => Full dependency ffmpeg>=20080727nb6: found ffmpeg-20080727nb8 => Full dependency mDNSResponder>=107.5nb1: found mDNSResponder-108nb1 => Full dependency libICE>=0.99.1: found libICE-1.0.5 => Full dependency libXi>=1.0.0: found libXi-1.2.1 => Full dependency gnutls>=2.2.2: found gnutls-2.6.6 ===> Overriding tools for nucleo-0.7.1nb3 ===> Extracting for nucleo-0.7.1nb3 ===> Patching for nucleo-0.7.1nb3 => Applying pkgsrc patches for nucleo-0.7.1nb3 => Fixing plugin-descr targets. ===> Creating toolchain wrappers for nucleo-0.7.1nb3 src=/usr/pkg/lib/pkgconfig/fixesproto.pc dst=/scratch/x11/nucleo/work/.buildlink/lib/pkgconfig/fixesext.pc; /bin/mkdir -p /scratch/x11/nucleo/work/.buildlink/lib/pkgconfig; if test -f ${src}; then /bin/ln -sf ${src} ${dst}; fi ===> Configuring for nucleo-0.7.1nb3 => Modifying GNU configure scripts to avoid --recheck => Replacing config-guess with pkgsrc versions => Replacing config-sub with pkgsrc versions => Replacing install-sh with pkgsrc version => Replacing python interpreter in docs/MacOSX/nBundle.in. => Checking for portability problems in extracted files configure: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used. checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether build environment is sane... yes checking for a thread-safe mkdir -p... build-utils/install-sh -c -d checking for gawk... /usr/bin/awk checking whether make sets $(MAKE)... yes checking for i386-pc-dragonfly-strip... no checking for strip... strip checking for C++ compiler default output file name... a.out checking whether the C++ compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C++ compiler... yes checking whether c++ accepts -g... yes checking for style of include used by make... GNU checking dependency style of c++... gcc3 checking build system type... i386-unknown-dragonfly2.3 checking host system type... i386-pc-dragonfly checking for i386-pc-dragonfly-gcc... cc checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking dependency style of cc... gcc3 checking for a sed that does not truncate output... /scratch/x11/nucleo/work/.tools/bin/sed checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for ld used by cc... /scratch/x11/nucleo/work/.wrapper/bin/ld checking if the linker (/scratch/x11/nucleo/work/.wrapper/bin/ld) is GNU ld... yes checking for /scratch/x11/nucleo/work/.wrapper/bin/ld option to reload object files... -r checking for BSD-compatible nm... nm checking whether ln -s works... yes checking how to recognize dependent libraries... pass_all checking how to run the C preprocessor... cc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking how to run the C++ preprocessor... c++ -E checking for i386-pc-dragonfly-g77... f77 checking whether we are using the GNU Fortran 77 compiler... no checking whether f77 accepts -g... no checking the maximum length of command line arguments... (cached) 262144 checking command to parse nm output from cc object... ok checking for objdir... .libs checking for i386-pc-dragonfly-ar... no checking for ar... ar checking for i386-pc-dragonfly-ranlib... no checking for ranlib... ranlib checking for i386-pc-dragonfly-strip... strip checking for correct ltmain.sh version... yes checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC checking if cc PIC flag -fPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking whether the cc linker (/scratch/x11/nucleo/work/.wrapper/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by c++... /scratch/x11/nucleo/work/.wrapper/bin/ld checking if the linker (/scratch/x11/nucleo/work/.wrapper/bin/ld) is GNU ld... yes checking whether the c++ linker (/scratch/x11/nucleo/work/.wrapper/bin/ld) supports shared libraries... yes checking for c++ option to produce PIC... -fPIC checking if c++ PIC flag -fPIC works... yes checking if c++ static flag -static works... yes checking if c++ supports -c -o file.o... yes checking whether the c++ linker (/scratch/x11/nucleo/work/.wrapper/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly ld.so (cached) (cached) checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking for f77 option to produce PIC... -fPIC checking if f77 PIC flag -fPIC works... no checking if f77 static flag -static works... no checking if f77 supports -c -o file.o... no checking whether the f77 linker (/scratch/x11/nucleo/work/.wrapper/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly ld.so (cached) (cached) checking how to hardcode library paths into programs... immediate checking for i386-pc-dragonfly-pkg-config... /scratch/x11/nucleo/work/.tools/bin/pkg-config checking for void *... yes checking size of void *... 4 checking for unsigned... yes checking size of unsigned... 4 debug unsigned int size: 4 checking hash_map usability... no checking hash_map presence... no checking for hash_map... no checking ext/hash_map usability... yes checking ext/hash_map presence... yes checking for ext/hash_map... yes checking for X... libraries , headers checking for gethostbyname... yes checking for connect... yes checking for remove... yes checking for shmat... yes checking for IceConnectionNumber in -lICE... yes checking GL/gl.h usability... yes checking GL/gl.h presence... yes checking for GL/gl.h... yes checking for GL/glext.h... yes checking for GL/glu.h... yes checking for GL/glx.h... yes checking for pthread_create in -lpthread... yes checking for glFlush in -lGL... yes checking for gluUnProject in -lGLU... yes checking for XListInputDevices in -lXi... yes checking for glXGetProcAddress in -lGL... yes checking for jpeg_start_decompress in -ljpeg... yes checking jpeglib.h usability... yes checking jpeglib.h presence... yes checking for jpeglib.h... yes checking for libpng using pkg-config... yes checking for libexif using pkg-config... yes checking for freetype2 using pkg-config... yes checking for DNSServiceRegister in -ldns_sd... yes checking dns_sd.h usability... yes checking dns_sd.h presence... yes checking for dns_sd.h... yes checking for XML_GetFeatureList in -lexpat... yes checking expat.h usability... yes checking expat.h presence... yes checking for expat.h... yes checking for gnutls using pkg-config... yes checking for dlfcn.h... (cached) yes checking dl.h usability... no checking dl.h presence... no checking for dl.h... no checking for dlopen... yes checking for libavformat using pkg-config... yes checking for QtCore using pkg-config... no checking for gdlib-config... yes checking for opencv using pkg-config... no configure: creating ./config.status config.status: creating Makefile config.status: creating nucleo/nucleo.H config.status: creating nucleo/Makefile config.status: creating nucleo/core/Makefile config.status: creating nucleo/core/select/Makefile config.status: creating nucleo/core/carbon/Makefile config.status: creating nucleo/core/corefoundation/Makefile config.status: creating nucleo/utils/Makefile config.status: creating nucleo/xml/Makefile config.status: creating nucleo/network/Makefile config.status: creating nucleo/network/udp/Makefile config.status: creating nucleo/network/tcp/Makefile config.status: creating nucleo/network/http/Makefile config.status: creating nucleo/network/dnssd/Makefile config.status: creating nucleo/network/xmpp/Makefile config.status: creating nucleo/image/Makefile config.status: creating nucleo/image/encoding/Makefile config.status: creating nucleo/image/source/Makefile config.status: creating nucleo/image/sink/Makefile config.status: creating nucleo/image/processing/Makefile config.status: creating nucleo/image/processing/basic/Makefile config.status: creating nucleo/image/processing/chromakeying/Makefile config.status: creating nucleo/image/processing/convolution/Makefile config.status: creating nucleo/image/processing/difference/Makefile config.status: creating nucleo/image/processing/gamma/Makefile config.status: creating nucleo/image/processing/noise/Makefile config.status: creating nucleo/gl/Makefile config.status: creating nucleo/gl/glIncludes.H config.status: creating nucleo/gl/window/Makefile config.status: creating nucleo/gl/texture/Makefile config.status: creating nucleo/gl/text/Makefile config.status: creating nucleo/gl/scenegraph/Makefile config.status: creating nucleo/gl/shading/Makefile config.status: creating nucleo/helpers/Makefile config.status: creating nucleo/plugins/Makefile config.status: creating nucleo/plugins/vnc/Makefile config.status: creating nucleo/plugins/ffmpeg/Makefile config.status: creating nucleo/plugins/qt/Makefile config.status: creating nucleo/plugins/gd/Makefile config.status: creating tests/Makefile config.status: creating demos/Makefile config.status: creating demos/video/Makefile config.status: creating demos/misc/Makefile config.status: creating demos/vnc/Makefile config.status: creating demos/opencv/Makefile config.status: creating demos/opencv/faceFinder/Makefile config.status: creating demos/opencv/opticalFlow/Makefile config.status: creating apps/Makefile config.status: creating apps/videoServer/Makefile config.status: creating data/Makefile config.status: creating data/vera/Makefile config.status: creating docs/Makefile config.status: creating docs/MacOSX/Makefile config.status: creating docs/MacOSX/nTest config.status: WARNING: docs/MacOSX/nTest.in seems to ignore the --datarootdir setting config.status: creating docs/MacOSX/nBundle config.status: WARNING: docs/MacOSX/nBundle.in seems to ignore the --datarootdir setting config.status: creating build-utils/Makefile config.status: creating build-utils/rpm/Makefile config.status: creating build-utils/rpm/nucleo.spec config.status: creating nucleo-config config.status: creating nucleo.pc config.status: creating nucleo/config.H config.status: executing depfiles commands NĂșcleo configuration: Architecture: i386-pc-dragonfly ------ glWindow backend? GLX + Xinput glXGetProcAddress JPEG image support? yes (using libjpeg) PNG image support? yes (using libpng) EXIF support? yes (using libexif) Freetype2 support? yes DNS-SD support? yes support? yes GnuTLS support? yes --- FFmpeg plugin? yes VNC plugin? no (--with-vnc option not or badly used) Qt plugin? no (QtCore not found by pkg-config) GD plugin? yes ------ Build OpenCV demos? no (opencv not found by pkg-config) => Modifying libtool scripts to use pkgsrc libtool WARNING: *** Please consider adding fortran to USE_LANGUAGES in the package Makefile.