Copyright (c) 2003-2009 The DragonFly Project. Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. DragonFly 2.3.1-DEVELOPMENT #2: Fri May 29 08:46:41 EEST 2009 hasso@pos.estpak.ee:/usr/obj/home/hasso/dragonfly-src/sys/GENERIC Calibrating clock(s) ... TSC clock: 1596008608 Hz, i8254 clock: 1193188 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Intel(R) Core(TM)2 Duo CPU L7500 @ 1.60GHz (1596.01-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6fb Stepping = 11 Features=0xbfebfbff Features2=0xe3bd Hyperthreading: 2 logical CPUs real memory = 2104164352 (2054848K bytes) Physical memory chunk(s): 0x00001000 - 0x0009cfff, 638976 bytes (156 pages) 0x00944000 - 0x7d69ffff, 2094383104 bytes (511324 pages) avail memory = 2027614208 (1980092K bytes) lapic: divisor index 0, frequency 99746355 Hz SMP: CPU0 apic_initialize(): lint0: 0x00000700 lint1: 0x00010400 TPR: 0x0000008f SVR: 0x000001ff DragonFly/MP: Multiprocessor motherboard cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee00000 Warning: APIC I/O disabled Finish MP startup SMP: AP CPU #1 Launched! SMP: CPU1 apic_initialize(): lint0: 0x00010000 lint1: 0x00010400 TPR: 0x0000008f SVR: 0x000001ff Active CPU Mask: 00000003 bios32: Found BIOS32 Service Directory header at 0xc00f6900 bios32: Entry = 0xfdc80 (c00fdc80) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0x1b7 pnpbios: Found PnP BIOS data at 0xc00f69a0 pnpbios: Entry = f0000:b83d Rev = 1.0 Other BIOS signatures found: objcache(exec-args): too small for ncpus, adjusting cluster_limit 16->32 Preloaded elf kernel "/boot/kernel" at 0xc0917000. Preloaded elf module "/boot/modules/if_ath.ko" at 0xc09173a8. ath_hal: 081128 ath_rate: version 1.2 Preloaded elf module "/boot/modules/ath_hal.ko" at 0xc0917454. Preloaded elf module "/boot/modules/ath_rate.ko" at 0xc0917504. Preloaded elf module "/boot/modules/snd_hda.ko" at 0xc09175b4. Preloaded elf module "/boot/modules/sound.ko" at 0xc0917664. Preloaded elf module "/boot/modules/acpi_video.ko" at 0xc0917710. Preloaded elf module "/boot/modules/acpi.ko" at 0xc09177c0. Preloaded elf module "/boot/modules/cmx.ko" at 0xc091786c. start dummy scheduler helpers on cpus: 0 1 start scheduler helpers on cpus: 0 1 wlan: <802.11 Link Layer> crypto: Pentium Pro MTRR support enabled md0: Malloc disk Math emulator present ACPI: RSDP @ 0x0xf6950/0x0024 (v 2 LENOVO) ACPI: XSDT @ 0x0x7d6bd368/0x0094 (v 1 LENOVO TP-7N 0x00002190 LTP 0x00000000) ACPI: FACP @ 0x0x7d6bd500/0x00F4 (v 3 LENOVO TP-7N 0x00002190 LNVO 0x00000001) ACPI Warning (tbfadt-0505): Optional field "Gpe1Block" has zero address or length: 0 102C/0 [20061109] ACPI: DSDT @ 0x0x7d6bd8db/0xE32A (v 1 LENOVO TP-7N 0x00002190 MSFT 0x03000000) ACPI: FACS @ 0x0x7d6e4000/0x0040 ACPI: SSDT @ 0x0x7d6bd6b4/0x0227 (v 1 LENOVO TP-7N 0x00002190 MSFT 0x03000000) ACPI: ECDT @ 0x0x7d6cbc05/0x0052 (v 1 LENOVO TP-7N 0x00002190 LNVO 0x00000001) ACPI: TCPA @ 0x0x7d6cbc57/0x0032 (v 2 LENOVO TP-7N 0x00002190 LNVO 0x00000001) ACPI: APIC @ 0x0x7d6cbc89/0x0068 (v 1 LENOVO TP-7N 0x00002190 LNVO 0x00000001) ACPI: MCFG @ 0x0x7d6cbcf1/0x003C (v 1 LENOVO TP-7N 0x00002190 LNVO 0x00000001) ACPI: HPET @ 0x0x7d6cbd2d/0x0038 (v 1 LENOVO TP-7N 0x00002190 LNVO 0x00000001) ACPI: SLIC @ 0x0x7d6cbdf0/0x0176 (v 1 LENOVO TP-7N 0x00002190 LTP 0x00000000) ACPI: BOOT @ 0x0x7d6cbf66/0x0028 (v 1 LENOVO TP-7N 0x00002190 LTP 0x00000001) ACPI: ASF! @ 0x0x7d6cbf8e/0x0072 (v 16 LENOVO TP-7N 0x00002190 PTL 0x00000001) ACPI: SSDT @ 0x0x7d6e2697/0x025F (v 1 LENOVO TP-7N 0x00002190 INTL 0x20050513) ACPI: SSDT @ 0x0x7d6e28f6/0x00A6 (v 1 LENOVO TP-7N 0x00002190 INTL 0x20050513) ACPI: SSDT @ 0x0x7d6e299c/0x04F7 (v 1 LENOVO TP-7N 0x00002190 INTL 0x20050513) ACPI: SSDT @ 0x0x7d6e2e93/0x01D8 (v 1 LENOVO TP-7N 0x00002190 INTL 0x20050513) pci_open(1): mode 1 addr port (0x0cf8) is 0x8000fa04 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=2a008086) pcibios: BIOS version 3.00 acpi0.nexus0.root0 acpi0: [tentative] on motherboard acpi_ec0.acpi0.nexus0.root0 acpi_ec0: [tentative] port 0x66,0x62 on acpi0 acpi_ec0: [attached!] port 0x66,0x62 on acpi0 AcpiOsDerivePciId: bus 0 dev 0 func 0 AcpiOsDerivePciId: bus 0 dev 29 func 7 AcpiOsDerivePciId: bus 0 dev 26 func 7 acpi0: Power Button (fixed) Warning: ACPI is disabling APM's device. You can't run both AcpiOsDerivePciId: bus 0 dev 31 func 0 ACPI timer looks GOOD min = 5, max = 7, width = 2 ACPI timer looks GOOD min = 5, max = 7, width = 2 ACPI timer looks GOOD min = 5, max = 7, width = 2 ACPI timer looks GOOD min = 5, max = 7, width = 2 ACPI timer looks GOOD min = 5, max = 7, width = 2 ACPI timer looks GOOD min = 5, max = 7, width = 2 ACPI timer looks GOOD min = 5, max = 7, width = 2 ACPI timer looks GOOD min = 5, max = 7, width = 2 ACPI timer looks GOOD min = 5, max = 7, width = 2 ACPI timer looks GOOD min = 5, max = 7, width = 2 acpi_timer0.acpi0.nexus0.root0 acpi_timer0: <24-bit timer at 3.579545MHz> [tentative] port 0x1008-0x100b on acpi0 acpi_timer0: <24-bit timer at 3.579545MHz> [attached!] port 0x1008-0x100b on acpi0 acpi_hpet0.acpi0.nexus0.root0 acpi_hpet0: [tentative] iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x8086, rev: 0x1, num: 2, opts: legacy_route 64-bit acpi_hpet0: frequency 14318180 acpi_hpet0: [attached!] iomem 0xfed00000-0xfed003ff on acpi0 cpu0.acpi0.nexus0.root0 cpu0: [tentative] on acpi0 cpu_cst0.cpu0.acpi0.nexus0.root0 cpu_cst0: [tentative] on cpu0 ACPI: SSDT @ 0x0x7d6e1e39/0x085E (v 1 PmRef Cpu0Cst 0x00000100 INTL 0x20050513) ACPI: SSDT @ 0x0x7d6e1b32/0x0282 (v 1 PmRef Cpu0Ist 0x00000100 INTL 0x20050513) cpu_cst0: [attached!] on cpu0 cpu0: [attached!] on acpi0 cpu1.acpi0.nexus0.root0 cpu1: [tentative] on acpi0 cpu_cst1.cpu1.acpi0.nexus0.root0 cpu_cst1: [tentative] on cpu1 ACPI: SSDT @ 0x0x7d6e1db4/0x0085 (v 1 PmRef Cpu1Cst 0x00000100 INTL 0x20050513) ACPI: SSDT @ 0x0x7d6e1a6a/0x00C8 (v 1 PmRef Cpu1Ist 0x00000100 INTL 0x20050513) acpi_ec0: info: new max delay is 50 us cpu_cst1: [attached!] on cpu1 cpu1: [attached!] on acpi0 acpi_tz0.acpi0.nexus0.root0 acpi_tz0: [tentative] on acpi0 acpi_tz0: [attached!] on acpi0 acpi_tz1.acpi0.nexus0.root0 acpi_tz1: [tentative] on acpi0 acpi_tz1: [attached!] on acpi0 acpi_lid0.acpi0.nexus0.root0 acpi_lid0: [tentative] on acpi0 acpi_lid0: [attached!] on acpi0 acpi_button0.acpi0.nexus0.root0 acpi_button0: [tentative] on acpi0 acpi_button0: [attached!] on acpi0 unknown: not probed (disabled) acpi_video0.acpi0.nexus0.root0 acpi_video0: [tentative] on acpi0 found Internal/Integrated Digital Flat Panel(400), idx#0, port#0, head #0 found VGA CRT or VESA Compatible Analog Monitor(100), idx#0, port#0, head #0 found External Digital Monitor(300), idx#0, port#0, head #0 acpi_video0: [attached!] on acpi0 atkbdc0.acpi0.nexus0.root0 atkbdc0: [tentative] port 0x64,0x60 irq 1 on acpi0 atkbd0.atkbdc0.acpi0.nexus0.root0 atkbd0: [tentative] flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x54ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 atkbd0: [attached!] flags 0x1 irq 1 on atkbdc0 psm0: current command byte:0047 psm0.atkbdc0.acpi0.nexus0.root0 psm0: [tentative] irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 psm0: [attached!] irq 12 on atkbdc0 atkbdc0: [attached!] port 0x64,0x60 irq 1 on acpi0 sio0: irq maps: 0 0x10 0 0 sio0.acpi0.nexus0.root0 sio0 [tentative] port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio0 [attached!] port 0x3f8-0x3ff irq 4 on acpi0 ppc0: using extended I/O port range ppc0: SPP ppc0.acpi0.nexus0.root0 ppc0 [tentative] port 0x3bc-0x3be irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0.ppc0.acpi0.nexus0.root0 ppbus0: [tentative] on ppc0 plip0.ppbus0.ppc0.acpi0.nexus0.root0 plip0: [tentative] on ppbus0 lp0: bpf attached plip0: [attached!] on ppbus0 lpt0.ppbus0.ppc0.acpi0.nexus0.root0 lpt0: [tentative] on ppbus0 lpt0: Interrupt-driven port lpt0: [attached!] on ppbus0 ppi0.ppbus0.ppc0.acpi0.nexus0.root0 ppi0: [tentative] on ppbus0 ppi0: [attached!] on ppbus0 ppbus0: [attached!] on ppc0 ppc0 [attached!] port 0x3bc-0x3be irq 7 on acpi0 unknown: not probed (disabled) unknown: not probed (disabled) acpi_video1.acpi0.nexus0.root0 acpi_video1: [tentative] on acpi0 found Internal/Integrated Digital Flat Panel(110), idx#0, port#1, head #0 found VGA CRT or VESA Compatible Analog Monitor(100), idx#0, port#0, head #0 found TV/HDTV or Analog-Video Monitor(210), idx#0, port#1, head #0 acpi_video1: [attached!] on acpi0 battery0.acpi0.nexus0.root0 battery0: [tentative] on acpi0 battery0: [attached!] on acpi0 unknown: not probed (disabled) unknown: not probed (disabled) acpi_acad0.acpi0.nexus0.root0 acpi_acad0: [tentative] on acpi0 acpi_acad0: [attached!] on acpi0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) acpi0: [attached!] at irq 9 on motherboard npx0.nexus0.root0 npx0: [tentative] on motherboard npx0: INT 16 interface Using XMM optimized bcopy/copyin/copyout npx0: [attached!] on motherboard legacypci0.nexus0.root0 legacypci0 [tentative] on motherboard pcib0.legacypci0.nexus0.root0 pcib0: [tentative] on legacypci0 pci0.pcib0.legacypci0.nexus0.root0 pci0: [tentative] on pcib0 pci0: pci_attach() physical bus=0 found-> vendor=0x8086, dev=0x2a00, revid=0x0c bus=0, slot=0, func=0 class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 64, base f8000000, size 20 map[18]: type 1, range 64, base e0000000, size 28 map[20]: type 1, range 32, base 00001800, size 3 found-> vendor=0x8086, dev=0x2a02, revid=0x0c bus=0, slot=2, func=0 class=[DISPLAY]03-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=10 map[10]: type 1, range 64, base f8100000, size 20 found-> vendor=0x8086, dev=0x2a03, revid=0x0c bus=0, slot=2, func=1 class=[DISPLAY]03-80-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base f8200000, size 17 map[14]: type 1, range 32, base f8225000, size 12 map[18]: type 1, range 32, base 00001840, size 5 found-> vendor=0x8086, dev=0x1049, revid=0x03 bus=0, slot=25, func=0 class=[NETWORK]02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[20]: type 1, range 32, base 00001860, size 5 found-> vendor=0x8086, dev=0x2834, revid=0x03 bus=0, slot=26, func=0 class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[20]: type 1, range 32, base 00001880, size 5 found-> vendor=0x8086, dev=0x2835, revid=0x03 bus=0, slot=26, func=1 class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=b, irq=11 map[10]: type 1, range 32, base f8426c00, size 10 found-> vendor=0x8086, dev=0x283a, revid=0x03 bus=0, slot=26, func=7 class=[SERIALBUS]0c-03-20, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=c, irq=11 map[10]: type 1, range 64, base f8220000, size 14 found-> vendor=0x8086, dev=0x284b, revid=0x03 bus=0, slot=27, func=0 class=[MULTIMEDIA]04-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=b, irq=11 PCI Express ver.1 cap=0x0091 found-> vendor=0x8086, dev=0x283f, revid=0x03 bus=0, slot=28, func=0 class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=1 subordinatebus=2 secondarybus=2 intpin=a, irq=11 PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x0010a0e0[HOTPLUG] found-> vendor=0x8086, dev=0x2841, revid=0x03 bus=0, slot=28, func=1 class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=1 subordinatebus=3 secondarybus=3 intpin=b, irq=11 PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x0018a0e0[HOTPLUG] map[20]: type 1, range 32, base 000018a0, size 5 found-> vendor=0x8086, dev=0x2830, revid=0x03 bus=0, slot=29, func=0 class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=10 map[20]: type 1, range 32, base 000018c0, size 5 found-> vendor=0x8086, dev=0x2831, revid=0x03 bus=0, slot=29, func=1 class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=b, irq=11 map[10]: type 1, range 32, base f8427000, size 10 found-> vendor=0x8086, dev=0x2836, revid=0x03 bus=0, slot=29, func=7 class=[SERIALBUS]0c-03-20, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=11 found-> vendor=0x8086, dev=0x2448, revid=0xf3 bus=0, slot=30, func=0 class=[BRIDGE]06-04-01, hdrtype=0x01, mfdev=0 subordinatebus=8 secondarybus=5 found-> vendor=0x8086, dev=0x2811, revid=0x03 bus=0, slot=31, func=0 class=[BRIDGE]06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 000018e0, size 4 found-> vendor=0x8086, dev=0x2850, revid=0x03 bus=0, slot=31, func=1 class=[STORAGE]01-01-8a, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=c, irq=255 map[10]: type 1, range 32, base 00001c30, size 3 map[14]: type 1, range 32, base 00001c24, size 2 map[18]: type 3, range 32, base 00001c28, size 3 map[1c]: type 1, range 32, base 00001c20, size 2 map[20]: type 1, range 32, base 00001c00, size 5 map[24]: type 1, range 32, base f8426000, size 11 found-> vendor=0x8086, dev=0x2829, revid=0x03 bus=0, slot=31, func=2 class=[STORAGE]01-06-01, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=b, irq=10 map[10]: type 1, range 32, base f8427400, size 8 map[20]: type 1, range 32, base 00001c40, size 5 found-> vendor=0x8086, dev=0x283e, revid=0x03 bus=0, slot=31, func=3 class=[SERIALBUS]0c-05-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 agp0.pci0.pcib0.legacypci0.nexus0.root0 agp0: [tentative] port 0x1800-0x1807 mem 0xe0000000-0xefffffff,0xf8000000-0xf80fffff irq 10 at device 2.0 on pci0 agp0: detected 7676k stolen memory agp0: aperture size is 256M agp0: [attached!] port 0x1800-0x1807 mem 0xe0000000-0xefffffff,0xf8000000-0xf80fffff irq 10 at device 2.0 on pci0 pci0: (vendor=0x8086, dev=0x2a03) at 2.1 em0.pci0.pcib0.legacypci0.nexus0.root0 em0: [tentative] port 0x1840-0x185f mem 0xf8225000-0xf8225fff,0xf8200000-0xf821ffff irq 11 at device 25.0 on pci0 battery0: battery initialization start acpi_ec0: info: new max delay is 60 us acpi_ec0: info: new max delay is 70 us acpi_ec0: info: new max delay is 80 us acpi_ec0: info: new max delay is 90 us acpi_ec0: info: new max delay is 140 us battery0: battery initialization done, tried 1 times acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times em0: bpf attached em0: MAC address: 00:16:d3:c2:f7:57 em0: [attached!] port 0x1840-0x185f mem 0xf8225000-0xf8225fff,0xf8200000-0xf821ffff irq 11 at device 25.0 on pci0 pci0: (vendor=0x8086, dev=0x2834) at 26.0 irq 11 pci0: (vendor=0x8086, dev=0x2835) at 26.1 irq 11 pci0: (vendor=0x8086, dev=0x283a) at 26.7 irq 11 pcm0.pci0.pcib0.legacypci0.nexus0.root0 pcm0: [tentative] mem 0xf8220000-0xf8223fff irq 11 at device 27.0 on pci0 pcm0: [attached!] mem 0xf8220000-0xf8223fff irq 11 at device 27.0 on pci0 pcib1.pci0.pcib0.legacypci0.nexus0.root0 pcib1: [tentative] irq 11 at device 28.0 on pci0 pcib1: secondary bus 2 pcib1: subordinate bus 2 pcib1: I/O decode 0x2000-0x2fff pcib1: memory decode 0xf4000000-0xf5ffffff pcib1: prefetched decode 0xf8500000-0xf85fffff pci2.pcib1.pci0.pcib0.legacypci0.nexus0.root0 pci2: [tentative] on pcib1 pci2: pci_attach() physical bus=2 pci2: [attached!] on pcib1 pcib1: [attached!] irq 11 at device 28.0 on pci0 pcib2.pci0.pcib0.legacypci0.nexus0.root0 pcib2: [tentative] irq 11 at device 28.1 on pci0 pcib2: secondary bus 3 pcib2: subordinate bus 3 pcib2: I/O decode 0x3000-0x3fff pcib2: memory decode 0xf6000000-0xf7ffffff pcib2: prefetched decode 0xf8600000-0xf86fffff pci3.pcib2.pci0.pcib0.legacypci0.nexus0.root0 pci3: [tentative] on pcib2 pci3: pci_attach() physical bus=3 map[10]: type 1, range 64, base f7f00000, size 16 found-> vendor=0x168c, dev=0x0024, revid=0x01 bus=3, slot=0, func=0 class=[NETWORK]02-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 PCI Express ver.1 cap=0x0011[LEGDEV] ath0.pci3.pcib2.pci0.pcib0.legacypci0.nexus0.root0 ath0: [tentative] mem 0xf7f00000-0xf7f0ffff irq 11 at device 0.0 on pci3 pcib2: device ath0 requested decoded memory range 0xf7f00000-0xf7f0ffff boundary check failed alignment check failed alignment check failed ath0: four TX queues ath0: bpf attached ath0: MAC address: 00:16:cf:b2:8f:5a ath0: bpf attached ath0: bpf attached ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: mac 12.10 phy 8.1 radio 12.0 ath0: Use hw queue 1 for WME_AC_BE traffic ath0: Use hw queue 0 for WME_AC_BK traffic ath0: Use hw queue 2 for WME_AC_VI traffic ath0: Use hw queue 3 for WME_AC_VO traffic ath0: Use hw queue 8 for CAB traffic ath0: Use hw queue 9 for beacons ath0: [attached!] mem 0xf7f00000-0xf7f0ffff irq 11 at device 0.0 on pci3 pci3: [attached!] on pcib2 pcib2: [attached!] irq 11 at device 28.1 on pci0 pci0: (vendor=0x8086, dev=0x2830) at 29.0 irq 10 pci0: (vendor=0x8086, dev=0x2831) at 29.1 irq 11 pci0: (vendor=0x8086, dev=0x2836) at 29.7 irq 11 pcib3.pci0.pcib0.legacypci0.nexus0.root0 pcib3: [tentative] at device 30.0 on pci0 pcib3: secondary bus 5 pcib3: subordinate bus 8 pcib3: I/O decode 0x4000-0x7fff pcib3: memory decode 0x0-0x0 pcib3: prefetched decode 0x0-0x0 pcib3: Subtractively decoded bridge. pci5.pcib3.pci0.pcib0.legacypci0.nexus0.root0 pci5: [tentative] on pcib3 pci5: pci_attach() physical bus=5 map[10]: type 1, range 32, base d7eff000, size 12 found-> vendor=0x1180, dev=0x0476, revid=0xba bus=5, slot=0, func=0 class=[BRIDGE]06-07-00, hdrtype=0x02, mfdev=1 subordinatebus=8 secondarybus=6 intpin=a, irq=10 map[10]: type 1, range 32, base d7efec00, size 8 found-> vendor=0x1180, dev=0x0822, revid=0x21 bus=5, slot=0, func=2 class=[BASEPERIPH]08-05-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=c, irq=11 cbb0.pci5.pcib3.pci0.pcib0.legacypci0.nexus0.root0 cbb0: [tentative] mem 0xd7eff000-0xd7efffff irq 10 at device 0.0 on pci5 pcib3: device cbb0 requested decoded memory range 0xd7eff000-0xd7efffff cardbus0.cbb0.pci5.pcib3.pci0.pcib0.legacypci0.nexus0.root0 cardbus0: [tentative] on cbb0 cardbus0: [attached!] on cbb0 pccard0.cbb0.pci5.pcib3.pci0.pcib0.legacypci0.nexus0.root0 pccard0: <16-bit PCCard bus> [tentative] on cbb0 pccard0: <16-bit PCCard bus> [attached!] on cbb0 cbb0: PCI Configuration space: 0x00: 0x04761180 0x02100007 0x060700ba 0x00822008 0x10: 0xd7eff000 0x020000dc 0xb0080605 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0700010a 0x40: 0x20c617aa 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x04a00001 0x00000000 0x04630463 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x09000000 0x00f00000 0x00000003 0xb0: 0x00000000 0xb6000000 0x00003000 0x00000000 0xc0: 0x20c617aa 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001 0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 cbb0: [attached!] mem 0xd7eff000-0xd7efffff irq 10 at device 0.0 on pci5 pci5: (vendor=0x1180, dev=0x0822) at 0.2 irq 11 pci5: [attached!] on pcib3 pcib3: [attached!] at device 30.0 on pci0 isab0.pci0.pcib0.legacypci0.nexus0.root0 isab0: [tentative] at device 31.0 on pci0 isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0 isa0: [tentative] on isab0 isa0: [attached!] on isab0 isab0: [attached!] at device 31.0 on pci0 atapci0.pci0.pcib0.legacypci0.nexus0.root0 atapci0: [tentative] port 0x18e0-0x18ef,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0.atapci0.pci0.pcib0.legacypci0.nexus0.root0 ata0: [tentative] on atapci0 atapci0: reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=00 stat1=00 devices=0x4 ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire acd0: DVDR drive at ata0 as master acd0: read 2067KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata0: [attached!] on atapci0 ata1.atapci0.pci0.pcib0.legacypci0.nexus0.root0 ata1: [tentative] on atapci0 atapci0: reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ata1: [attached!] on atapci0 atapci0: [attached!] port 0x18e0-0x18ef,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 atapci1.pci0.pcib0.legacypci0.nexus0.root0 atapci1: [tentative] port 0x1c00-0x1c1f,0x1c20-0x1c23,0x1c28-0x1c2f,0x1c24-0x1c27,0x1c30-0x1c37 mem 0xf8426000-0xf84267ff irq 10 at device 31.2 on pci0 atapci1: AHCI Version 01.10 controller with 3 ports detected ata2.atapci1.pci0.pcib0.legacypci0.nexus0.root0 ata2: [tentative] on atapci1 intr 10 at 40001/40000 hz, livelocked limit engaged! ata2: SATA connect time=0ms ata2: ahci_reset devices=0x1 pcib3: device pccard0 requested decoded memory range 0x88000000-0xffffffff pccard0: CIS version PCCARD 2.0 or 2.1 pccard0: CIS info: OMNIKEY, CardMan 4040 pccard0: Manufacturer code 0x223, product 0x200 pccard0: function 0: unspecified, ccr addr 300 mask 3 pccard0: function 0, config table entry 35: I/O card; irq mask ffff; iomask 3, iospace 0-7; io8 irqshare irqlevel pccard0: function 0, config table entry 37: I/O card; irq mask ffff; iomask 3, iospace 0-7; io8 irqpulse irqlevel pccard0: function 0, config table entry 33: I/O card; irq mask ffff; iomask 3, iospace 0-7; io8 irqpulse irqlevel pcib3: device pccard0 requested decoded I/O range 0x4000-0x7fff pcib3: device pccard0 requested decoded memory range 0x88000000-0xffffffff cmx0.pccard0.cbb0.pci5.pcib3.pci0.pcib0.legacypci0.nexus0.root0 cmx0: [tentative] at port 0x4000-0x4007 irq 10 function 0 config 35 on pccard0 cmx0: attached cmx0: [attached!] at port 0x4000-0x4007 irq 10 function 0 config 35 on pccard0 ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire (probe0:ata0:0:0:0): error 22 (probe0:ata0:0:0:0): Unretryable Error ad4: Intel check1 failed ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed ad4: LSI (v2) check1 failed ad4: FreeBSD check1 failed ad4: 476940MB at ata2-master SATA150 ad4: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue ata2: [attached!] on atapci1 ata3.atapci1.pci0.pcib0.legacypci0.nexus0.root0 ata3: [tentative] on atapci1 ata3: port not implemented ata3: [attached!] on atapci1 ata4.atapci1.pci0.pcib0.legacypci0.nexus0.root0 ata4: [tentative] on atapci1 ata4: SATA connect status=00000000 ata4: ahci_reset devices=0x0 ata4: [attached!] on atapci1 atapci1: [attached!] port 0x1c00-0x1c1f,0x1c20-0x1c23,0x1c28-0x1c2f,0x1c24-0x1c27,0x1c30-0x1c37 mem 0xf8426000-0xf84267ff irq 10 at device 31.2 on pci0 pci0: (vendor=0x8086, dev=0x283e) at 31.3 irq 11 pci0: [attached!] on pcib0 pcib0: [attached!] on legacypci0 legacypci0 [attached!] on motherboard ex_isa_identify() ahc_isa_probe 1: ioport 0x1c00 alloc failed atkbdc-: atkbdc0 exists, using next available unit number sio-: sio0 exists, using next available unit number sio-: sio1 exists, using next available unit number sio-: sio2 exists, using next available unit number sio-: sio3 exists, using next available unit number ppc-: ppc0 exists, using next available unit number Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0 pmtimer0 [tentative] on isa0 pmtimer0 [attached!] on isa0 fdc0: ready for input in output fdc0: cmd 3 failed at out byte 1 of 3 fdc0 [tentative] failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 adv0 [tentative] failed to probe on isa0 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x330 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x334 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x230 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x234 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x130 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x134 bt0 [tentative] failed to probe at port 0x134-0x137 on isa0 aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0 [tentative] failed to probe at port 0x134-0x137 on isa0 aic0 [tentative] failed to probe at port 0x140-0x15f on isa0 atkbdc1: [tentative] failed to probe at port 0x60 on isa0 vga0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0 vga0: [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vga0: [attached!] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0 sc0: [tentative] at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sc0: [attached!] at flags 0x100 on isa0 lm0 [tentative] failed to probe at port 0x290-0x297 on isa0 it0 [tentative] failed to probe at port 0x290-0x297 on isa0 it1 [tentative] failed to probe at port 0xc00-0xc07 on isa0 it2 [tentative] failed to probe at port 0xd00-0xd07 on isa0 sio1 [tentative] failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0 sio2: can't drain, serial port might not exist, disabling sio2 [tentative] failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio3: not probed (disabled) sio4: not probed (disabled) ppc1: parallel port found at 0x3bc ppc1: cannot reserve I/O port range ppc1: [tentative] failed to probe at port 0x3bc-0x3c3 irq 7 on isa0 ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) cs0: not probed (disabled) sn0: not probed (disabled) isa_probe_children: probing PnP devices BIOS Geometries: 0:03feef3f 0..1022=1023 cylinders, 0..239=240 heads, 1..63=63 sectors 0 accounted for Device configuration finished. lo0: bpf attached ppp0: bpf attached sl0: bpf attached crypto: assign driver 0, flags 2 crypto: driver 0 registers alg 1 flags 0 maxoplen 0 crypto: driver 0 registers alg 2 flags 0 maxoplen 0 crypto: driver 0 registers alg 3 flags 0 maxoplen 0 crypto: driver 0 registers alg 4 flags 0 maxoplen 0 crypto: driver 0 registers alg 5 flags 0 maxoplen 0 crypto: driver 0 registers alg 17 flags 0 maxoplen 0 crypto: driver 0 registers alg 6 flags 0 maxoplen 0 crypto: driver 0 registers alg 7 flags 0 maxoplen 0 crypto: driver 0 registers alg 15 flags 0 maxoplen 0 crypto: driver 0 registers alg 8 flags 0 maxoplen 0 crypto: driver 0 registers alg 16 flags 0 maxoplen 0 crypto: driver 0 registers alg 9 flags 0 maxoplen 0 crypto: driver 0 registers alg 10 flags 0 maxoplen 0 crypto: driver 0 registers alg 13 flags 0 maxoplen 0 crypto: driver 0 registers alg 14 flags 0 maxoplen 0 crypto: driver 0 registers alg 11 flags 0 maxoplen 0 crypto: driver 0 registers alg 18 flags 0 maxoplen 0 faith0: bpf attached ip: MPSAFE arp: MPSAFE pcm0: Mixer "vol": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "mic": pcm0: Mixer "rec": pcm0: sndbuf_setmap ced000, 4000; 0xe81b4000 -> ced000 pcm0: sndbuf_setmap cf1000, 4000; 0xe81bc000 -> cf1000 pcm0: pcm0: (probe0:ata0:0:0:0): error 6 (probe0:ata0:0:0:0): Unretryable Error (probe0:ata0:0:0:0): error 22 (probe0:ata0:0:0:0): Unretryable Error pass0 at ata0 bus 0 target 0 lun 0 pass0: Removable CD-ROM SCSI-0 device pass0: 33.000MB/s transfers bootdev: a0200000 type=0 unit=0 slice=2 part=0 major=3 ATA PseudoRAID loaded Mounting root from hammer:/dev/ad4s1a (cd0:ata0:0:0:0): error 6 (cd0:ata0:0:0:0): Unretryable Error cd0 at ata0 bus 0 target 0 lun 0 cd0: Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present ad4s1: type 0xa5, start 63, end = 976773167, size 976773105 : OK start_init: trying /sbin/init intr 10 at 108/20000 hz, livelock removed coretemp0.cpu0.acpi0.nexus0.root0 coretemp0: [tentative] on cpu0 coretemp0: [attached!] on cpu0 coretemp1.cpu1.acpi0.nexus0.root0 coretemp1: [tentative] on cpu1 coretemp1: [attached!] on cpu1 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) acpi_thinkpad0.acpi0.nexus0.root0 acpi_thinkpad0: [tentative] on acpi0 acpi_thinkpad0: [attached!] on acpi0 ath0: detached em0: Link is up 100 Mbps Full Duplex