Copyright (c) 2003, 2004, 2005, 2006, 2007 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly 1.11.0-DEVELOPMENT #122: Fri Dec  7 09:29:14 EET 2007
    hasso@hasso.estpak.ee:/usr/obj/home/hasso/dragonfly-src/sys/GENERIC
Calibrating clock(s) ... TSC clock: 1596013968 Hz, i8254 clock: 1193192 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Intel(R) Core(TM)2 Duo CPU     L7500  @ 1.60GHz (1596.01-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,XTPR,RSVD15>
  Hyperthreading: 2 logical CPUs
real memory  = 1047199744 (1022656K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009cfff, 638976 bytes (156 pages)
0x00878000 - 0x3e69ffff, 1038254080 bytes (253480 pages)
avail memory = 1004519424 (980976K bytes)
SMP: CPU0 apic_initialize():
     lint0: 0x00000700 lint1: 0x00010400 TPR: 0x0000008f SVR: 0x000001ff
DragonFly/MP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  0, version: 0x00050014, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x00050014, at 0xfee00000
 Warning: APIC I/O disabled
Finish MP startup
SMP: AP CPU #1 Launched!
SMP: CPU1 apic_initialize():
     lint0: 0x00010000 lint1: 0x00010400 TPR: 0x0000008f SVR: 0x000001ff
Active CPU Mask: 00000003
bios32: Found BIOS32 Service Directory header at 0xc00f6900
bios32: Entry = 0xfdc80 (c00fdc80)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0x1b7
pnpbios: Found PnP BIOS data at 0xc00f69a0
pnpbios: Entry = f0000:b83b  Rev = 1.0
Other BIOS signatures found:
objcache(exec-args): too small for ncpus, adjusting cluster_limit 16->32
Preloaded elf kernel "/kernel" at 0xc084b000.
Preloaded elf module "/modules/acpi.ko" at 0xc084b3a0.
start scheduler helpers on cpus: 0 1
start dummy scheduler helpers on cpus: 0 1
crypto: <crypto core>
wlan: <802.11 Link Layer>
Pentium Pro MTRR support enabled
md0: Malloc disk
Math emulator present
pci_open(1):	mode 1 addr port (0x0cf8) is 0x8000fa04
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=2a008086)
pcibios: BIOS version 3.00
ACPI: RSDP @ 0x0xf6950/0x0024 (v  2 LENOVO)
ACPI: XSDT @ 0x0x3e6bd48c/0x0094 (v  1 LENOVO TP-7N    0x00001100  LTP 0x00000000)
ACPI: FACP @ 0x0x3e6bd600/0x00F4 (v  3 LENOVO TP-7N    0x00001100 LNVO 0x00000001)
ACPI Warning (tbfadt-0505): Optional field "Gpe1Block" has zero address or length:        0    102C/0 [20061109]
ACPI: DSDT @ 0x0x3e6bd9db/0xE206 (v  1 LENOVO TP-7N    0x00001100 MSFT 0x03000000)
ACPI: FACS @ 0x0x3e6e4000/0x0040
ACPI: SSDT @ 0x0x3e6bd7b4/0x0227 (v  1 LENOVO TP-7N    0x00001100 MSFT 0x03000000)
ACPI: ECDT @ 0x0x3e6cbbe1/0x0052 (v  1 LENOVO TP-7N    0x00001100 LNVO 0x00000001)
ACPI: TCPA @ 0x0x3e6cbc33/0x0032 (v  2 LENOVO TP-7N    0x00001100 LNVO 0x00000001)
ACPI: APIC @ 0x0x3e6cbc65/0x0068 (v  1 LENOVO TP-7N    0x00001100 LNVO 0x00000001)
ACPI: MCFG @ 0x0x3e6cbccd/0x003C (v  1 LENOVO TP-7N    0x00001100 LNVO 0x00000001)
ACPI: HPET @ 0x0x3e6cbd09/0x0038 (v  1 LENOVO TP-7N    0x00001100 LNVO 0x00000001)
ACPI: SLIC @ 0x0x3e6cbdf0/0x0176 (v  1 LENOVO TP-7N    0x00001100  LTP 0x00000000)
ACPI: BOOT @ 0x0x3e6cbf66/0x0028 (v  1 LENOVO TP-7N    0x00001100  LTP 0x00000001)
ACPI: ASF! @ 0x0x3e6cbf8e/0x0072 (v 16 LENOVO TP-7N    0x00001100 PTL  0x00000001)
ACPI: SSDT @ 0x0x3e6e2697/0x025F (v  1 LENOVO TP-7N    0x00001100 INTL 0x20050513)
ACPI: SSDT @ 0x0x3e6e28f6/0x00A6 (v  1 LENOVO TP-7N    0x00001100 INTL 0x20050513)
ACPI: SSDT @ 0x0x3e6e299c/0x04F7 (v  1 LENOVO TP-7N    0x00001100 INTL 0x20050513)
ACPI: SSDT @ 0x0x3e6e2e93/0x01D8 (v  1 LENOVO TP-7N    0x00001100 INTL 0x20050513)
npx0.nexus0.root0
npx0: <math processor> [tentative] on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
npx0: <math processor> [attached!] on motherboard
acpi0.nexus0.root0
acpi0: <LENOVO TP-7N> [tentative] on motherboard
acpi_ec0.acpi0.nexus0.root0
acpi_ec0: <Embedded Controller: GPE 0x12, ECDT> [tentative] port 0x66,0x62 on acpi0
acpi_ec0: <Embedded Controller: GPE 0x12, ECDT> [attached!] port 0x66,0x62 on acpi0
AcpiOsDerivePciId: bus 0 dev 0 func 0
AcpiOsDerivePciId: bus 0 dev 29 func 7
AcpiOsDerivePciId: bus 0 dev 26 func 7
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device.  You can't run both
AcpiOsDerivePciId: bus 0 dev 31 func 0
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks GOOD min = 5, max = 7, width = 2
acpi_timer0.acpi0.nexus0.root0
acpi_timer0: <24-bit timer at 3.579545MHz> [tentative] port 0x1008-0x100b on acpi0
acpi_timer0: <24-bit timer at 3.579545MHz> [attached!] port 0x1008-0x100b on acpi0
cpu0.acpi0.nexus0.root0
cpu0: <ACPI CPU (3 Cx states)> [tentative] on acpi0
cpu0: <ACPI CPU (3 Cx states)> [attached!] port 0x1015,0x1014,0x1010-0x1013 on acpi0
cpu1.acpi0.nexus0.root0
cpu1: <ACPI CPU (3 Cx states)> [tentative] on acpi0
cpu1: Failed to attach throttling P_CNT
cpu1: <ACPI CPU (3 Cx states)> [attached!] port 0x1015 on acpi0
acpi_tz0.acpi0.nexus0.root0
acpi_tz0: <Thermal Zone> [tentative] on acpi0
acpi_tz0: <Thermal Zone> [attached!] on acpi0
acpi_tz1.acpi0.nexus0.root0
acpi_tz1: <Thermal Zone> [tentative] on acpi0
acpi_tz1: <Thermal Zone> [attached!] on acpi0
acpi_lid0.acpi0.nexus0.root0
acpi_lid0: <Control Method Lid Switch> [tentative] on acpi0
acpi_lid0: <Control Method Lid Switch> [attached!] on acpi0
acpi_button0.acpi0.nexus0.root0
acpi_button0: <Sleep Button> [tentative] on acpi0
acpi_button0: <Sleep Button> [attached!] on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
atkbdc0.acpi0.nexus0.root0
atkbdc0: <Keyboard controller (i8042)> [tentative] port 0x64,0x60 irq 1 on acpi0
atkbd0.atkbdc0.acpi0.nexus0.root0
atkbd0: <AT Keyboard> [tentative] flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x54ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
atkbd0: <AT Keyboard> [attached!] flags 0x1 irq 1 on atkbdc0
psm0: current command byte:0047
cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
Warning: ACPI idle hook not yet supported for SMP
psm0.atkbdc0.acpi0.nexus0.root0
psm0: <PS/2 Mouse> [tentative] irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
psm0: <PS/2 Mouse> [attached!] irq 12 on atkbdc0
atkbdc0: <Keyboard controller (i8042)> [attached!] port 0x64,0x60 irq 1 on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
acpi_ec0: info: new max delay is 60 us
acpi_cmbat0.acpi0.nexus0.root0
acpi_cmbat0: <Control Method Battery> [tentative] on acpi0
acpi_cmbat0: <Control Method Battery> [attached!] on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
acpi_acad0.acpi0.nexus0.root0
acpi_acad0: <AC Adapter> [tentative] on acpi0
acpi_acad0: <AC Adapter> [attached!] on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
acpi0: <LENOVO TP-7N> [attached!] at irq 9 on motherboard
legacypci0.nexus0.root0
legacypci0 [tentative] on motherboard
pcib0.legacypci0.nexus0.root0
pcib0: <Host to PCI bridge> [tentative] on legacypci0
pci0.pcib0.legacypci0.nexus0.root0
pci0: <PCI bus> [tentative] on pcib0
pci0: pci_attach() physical bus=0
found->	vendor=0x8086, dev=0x2a00, revid=0x0c
	bus=0, slot=0, func=0
	class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	map[10]: type 1, range 64, base f8000000, size 20
	map[18]: type 1, range 64, base e0000000, size 28
	map[20]: type 1, range 32, base 00001800, size  3
found->	vendor=0x8086, dev=0x2a02, revid=0x0c
	bus=0, slot=2, func=0
	class=[DISPLAY]03-00-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=10
	map[10]: type 1, range 64, base f8100000, size 20
found->	vendor=0x8086, dev=0x2a03, revid=0x0c
	bus=0, slot=2, func=1
	class=[DISPLAY]03-80-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
	map[10]: type 1, range 32, base f8200000, size 17
	map[14]: type 1, range 32, base f8225000, size 12
	map[18]: type 1, range 32, base 00001840, size  5
found->	vendor=0x8086, dev=0x1049, revid=0x03
	bus=0, slot=25, func=0
	class=[NETWORK]02-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
	map[20]: type 1, range 32, base 00001860, size  5
found->	vendor=0x8086, dev=0x2834, revid=0x03
	bus=0, slot=26, func=0
	class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
	map[20]: type 1, range 32, base 00001880, size  5
found->	vendor=0x8086, dev=0x2835, revid=0x03
	bus=0, slot=26, func=1
	class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=b, irq=11
	map[10]: type 1, range 32, base f8426c00, size 10
found->	vendor=0x8086, dev=0x283a, revid=0x03
	bus=0, slot=26, func=7
	class=[SERIALBUS]0c-03-20, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=c, irq=11
	map[10]: type 1, range 64, base f8220000, size 14
found->	vendor=0x8086, dev=0x284b, revid=0x03
	bus=0, slot=27, func=0
	class=[MULTIMEDIA]04-03-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=b, irq=11
	PCI Express ver.1 cap=0x0091
found->	vendor=0x8086, dev=0x283f, revid=0x03
	bus=0, slot=28, func=0
	class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=1
	subordinatebus=2 	secondarybus=2
	intpin=a, irq=11
	PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x0010a0e0[HOTPLUG]
found->	vendor=0x8086, dev=0x2841, revid=0x03
	bus=0, slot=28, func=1
	class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=1
	subordinatebus=3 	secondarybus=3
	intpin=b, irq=11
	PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x0018a0e0[HOTPLUG]
	map[20]: type 1, range 32, base 000018a0, size  5
found->	vendor=0x8086, dev=0x2830, revid=0x03
	bus=0, slot=29, func=0
	class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=10
	map[20]: type 1, range 32, base 000018c0, size  5
found->	vendor=0x8086, dev=0x2831, revid=0x03
	bus=0, slot=29, func=1
	class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=b, irq=11
	map[10]: type 1, range 32, base f8427000, size 10
found->	vendor=0x8086, dev=0x2836, revid=0x03
	bus=0, slot=29, func=7
	class=[SERIALBUS]0c-03-20, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=d, irq=11
found->	vendor=0x8086, dev=0x2448, revid=0xf3
	bus=0, slot=30, func=0
	class=[BRIDGE]06-04-01, hdrtype=0x01, mfdev=0
	subordinatebus=8 	secondarybus=5
found->	vendor=0x8086, dev=0x2811, revid=0x03
	bus=0, slot=31, func=0
	class=[BRIDGE]06-01-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
	map[20]: type 1, range 32, base 000018e0, size  4
found->	vendor=0x8086, dev=0x2850, revid=0x03
	bus=0, slot=31, func=1
	class=[STORAGE]01-01-8a, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=c, irq=255
	map[10]: type 1, range 32, base 00001c30, size  3
	map[14]: type 1, range 32, base 00001c24, size  2
	map[18]: type 3, range 32, base 00001c28, size  3
	map[1c]: type 1, range 32, base 00001c20, size  2
	map[20]: type 1, range 32, base 00001c00, size  5
	map[24]: type 1, range 32, base f8426000, size 11
found->	vendor=0x8086, dev=0x2829, revid=0x03
	bus=0, slot=31, func=2
	class=[STORAGE]01-06-01, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=b, irq=10
	map[10]: type 1, range 32, base f8427400, size  8
	map[20]: type 1, range 32, base 00001c40, size  5
found->	vendor=0x8086, dev=0x283e, revid=0x03
	bus=0, slot=31, func=3
	class=[SERIALBUS]0c-05-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
agp0.pci0.pcib0.legacypci0.nexus0.root0
agp0: <Intel GM965 SVGA controller> [tentative] port 0x1800-0x1807 mem 0xe0000000-0xefffffff,0xf8000000-0xf80fffff irq 10 at device 2.0 on pci0
agp0: detected 7676k stolen memory
agp0: aperture size is 256M
agp0: <Intel GM965 SVGA controller> [attached!] port 0x1800-0x1807 mem 0xe0000000-0xefffffff,0xf8000000-0xf80fffff irq 10 at device 2.0 on pci0
pci0: <unknown card> (vendor=0x8086, dev=0x2a03) at 2.1
em0.pci0.pcib0.legacypci0.nexus0.root0
em0: <Intel(R) PRO/1000 Network Connection, Version - 6.2.9> [tentative] port 0x1840-0x185f mem 0xf8225000-0xf8225fff,0xf8200000-0xf821ffff irq 11 at device 25.0 on pci0
em0: bpf attached
em0: MAC address: 00:16:d3:c2:f7:57
em0: <Intel(R) PRO/1000 Network Connection, Version - 6.2.9> [attached!] port 0x1840-0x185f mem 0xf8225000-0xf8225fff,0xf8200000-0xf821ffff irq 11 at device 25.0 on pci0
uhci0.pci0.pcib0.legacypci0.nexus0.root0
uhci0: <UHCI (generic) USB controller> [tentative] port 0x1860-0x187f irq 11 at device 26.0 on pci0
acpi_cmbat0: battery initialization start
acpi_ec0: info: new max delay is 80 us
acpi_cmbat0: battery initialization done, tried 1 times
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
usb0.uhci0.pci0.pcib0.legacypci0.nexus0.root0
usb0: <UHCI (generic) USB controller> [tentative] on uhci0
usb0: USB revision 1.0
uhub0.usb0.uhci0.pci0.pcib0.legacypci0.nexus0.root0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb0
uhub0: 2 ports with 2 removable, self powered
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb0
ugen0.uhub0.usb0.uhci0.pci0.pcib0.legacypci0.nexus0.root0
ugen0: <STMicroelectronics Biometric Coprocessor, class 0/0, rev 1.00/0.01, addr 2> [tentative] on uhub0
ugen0: <STMicroelectronics Biometric Coprocessor, class 0/0, rev 1.00/0.01, addr 2> [attached!] on uhub0
usb0: <UHCI (generic) USB controller> [attached!] on uhci0
uhci0: <UHCI (generic) USB controller> [attached!] port 0x1860-0x187f irq 11 at device 26.0 on pci0
uhci1.pci0.pcib0.legacypci0.nexus0.root0
uhci1: <UHCI (generic) USB controller> [tentative] port 0x1880-0x189f irq 11 at device 26.1 on pci0
usb1.uhci1.pci0.pcib0.legacypci0.nexus0.root0
usb1: <UHCI (generic) USB controller> [tentative] on uhci1
usb1: USB revision 1.0
uhub1.usb1.uhci1.pci0.pcib0.legacypci0.nexus0.root0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb1
uhub1: 2 ports with 2 removable, self powered
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb1
usb1: <UHCI (generic) USB controller> [attached!] on uhci1
uhci1: <UHCI (generic) USB controller> [attached!] port 0x1880-0x189f irq 11 at device 26.1 on pci0
pci0: <USB controller> (vendor=0x8086, dev=0x283a) at 26.7 irq 11
pci0: <unknown card> (vendor=0x8086, dev=0x284b) at 27.0 irq 11
pcib1.pci0.pcib0.legacypci0.nexus0.root0
pcib1: <PCI to PCI bridge (vendor=8086 device=283f)> [tentative] irq 11 at device 28.0 on pci0
pcib1:   secondary bus     2
pcib1:   subordinate bus   2
pcib1:   I/O decode        0x2000-0x2fff
pcib1:   memory decode     0xf4000000-0xf5ffffff
pcib1:   prefetched decode 0xf8500000-0xf85fffff
pci2.pcib1.pci0.pcib0.legacypci0.nexus0.root0
pci2: <PCI bus> [tentative] on pcib1
pci2: pci_attach() physical bus=2
pci2: <PCI bus> [attached!] on pcib1
pcib1: <PCI to PCI bridge (vendor=8086 device=283f)> [attached!] irq 11 at device 28.0 on pci0
pcib2.pci0.pcib0.legacypci0.nexus0.root0
pcib2: <PCI to PCI bridge (vendor=8086 device=2841)> [tentative] irq 11 at device 28.1 on pci0
pcib2:   secondary bus     3
pcib2:   subordinate bus   3
pcib2:   I/O decode        0x3000-0x3fff
pcib2:   memory decode     0xf6000000-0xf7ffffff
pcib2:   prefetched decode 0xf8600000-0xf86fffff
pci3.pcib2.pci0.pcib0.legacypci0.nexus0.root0
pci3: <PCI bus> [tentative] on pcib2
pci3: pci_attach() physical bus=3
	map[10]: type 1, range 64, base f7f00000, size 13
found->	vendor=0x8086, dev=0x4230, revid=0x61
	bus=3, slot=0, func=0
	class=[NETWORK]02-80-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
	PCI Express ver.1 cap=0x0001[DEVICE]
pci3: <unknown card> (vendor=0x8086, dev=0x4230) at 0.0 irq 11
pci3: <PCI bus> [attached!] on pcib2
pcib2: <PCI to PCI bridge (vendor=8086 device=2841)> [attached!] irq 11 at device 28.1 on pci0
uhci2.pci0.pcib0.legacypci0.nexus0.root0
uhci2: <UHCI (generic) USB controller> [tentative] port 0x18a0-0x18bf irq 10 at device 29.0 on pci0
usb2.uhci2.pci0.pcib0.legacypci0.nexus0.root0
usb2: <UHCI (generic) USB controller> [tentative] on uhci2
usb2: USB revision 1.0
uhub2.usb2.uhci2.pci0.pcib0.legacypci0.nexus0.root0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb2
uhub2: 2 ports with 2 removable, self powered
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb2
usb2: <UHCI (generic) USB controller> [attached!] on uhci2
uhci2: <UHCI (generic) USB controller> [attached!] port 0x18a0-0x18bf irq 10 at device 29.0 on pci0
uhci3.pci0.pcib0.legacypci0.nexus0.root0
uhci3: <UHCI (generic) USB controller> [tentative] port 0x18c0-0x18df irq 11 at device 29.1 on pci0
usb3.uhci3.pci0.pcib0.legacypci0.nexus0.root0
usb3: <UHCI (generic) USB controller> [tentative] on uhci3
usb3: USB revision 1.0
uhub3.usb3.uhci3.pci0.pcib0.legacypci0.nexus0.root0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb3
uhub3: 2 ports with 2 removable, self powered
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb3
usb3: <UHCI (generic) USB controller> [attached!] on uhci3
uhci3: <UHCI (generic) USB controller> [attached!] port 0x18c0-0x18df irq 11 at device 29.1 on pci0
pci0: <USB controller> (vendor=0x8086, dev=0x2836) at 29.7 irq 11
pcib3.pci0.pcib0.legacypci0.nexus0.root0
pcib3: <PCI to PCI bridge (vendor=8086 device=2448)> [tentative] at device 30.0 on pci0
pcib3:   secondary bus     5
pcib3:   subordinate bus   8
pcib3:   I/O decode        0x4000-0x7fff
pcib3:   memory decode     0x0-0x0
pcib3:   prefetched decode 0x0-0x0
pcib3:   Subtractively decoded bridge.
pci5.pcib3.pci0.pcib0.legacypci0.nexus0.root0
pci5: <PCI bus> [tentative] on pcib3
pci5: pci_attach() physical bus=5
	map[10]: type 1, range 32, base d7eff000, size 12
found->	vendor=0x1180, dev=0x0476, revid=0xba
	bus=5, slot=0, func=0
	class=[BRIDGE]06-07-00, hdrtype=0x02, mfdev=1
	subordinatebus=8 	secondarybus=6
	intpin=a, irq=10
	map[10]: type 1, range 32, base d7efe800, size 11
found->	vendor=0x1180, dev=0x0832, revid=0x04
	bus=5, slot=0, func=1
	class=[SERIALBUS]0c-00-10, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
	intpin=b, irq=11
	map[10]: type 1, range 32, base d7efe400, size  8
found->	vendor=0x1180, dev=0x0822, revid=0x21
	bus=5, slot=0, func=2
	class=[BASEPERIPH]08-05-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
	intpin=c, irq=11
cbb0.pci5.pcib3.pci0.pcib0.legacypci0.nexus0.root0
cbb0: <RF5C476 PCI-CardBus Bridge> [tentative] mem 0xd7eff000-0xd7efffff irq 10 at device 0.0 on pci5
pcib3: device cbb0 requested decoded memory range 0xd7eff000-0xd7efffff
cardbus0.cbb0.pci5.pcib3.pci0.pcib0.legacypci0.nexus0.root0
cardbus0: <CardBus bus> [tentative] on cbb0
cardbus0: <CardBus bus> [attached!] on cbb0
pccard0.cbb0.pci5.pcib3.pci0.pcib0.legacypci0.nexus0.root0
pccard0: <16-bit PCCard bus> [tentative] on cbb0
pccard0: <16-bit PCCard bus> [attached!] on cbb0
cbb0: PCI Configuration space:
  0x00: 0x04761180 0x02100007 0x060700ba 0x00822000 
  0x10: 0xd7eff000 0x020000dc 0xb0080605 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
  0x30: 0x00000000 0xfffffffc 0x00000000 0x0700010a 
  0x40: 0x20c617aa 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x04a00001 0x00000000 0x04630463 0x00000000 
  0x90: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xa0: 0x00000000 0x01000000 0x00f00000 0x00000003 
  0xb0: 0x00000000 0xb2000000 0x00003000 0x00000000 
  0xc0: 0x20c617aa 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001 
  0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
cbb0: <RF5C476 PCI-CardBus Bridge> [attached!] mem 0xd7eff000-0xd7efffff irq 10 at device 0.0 on pci5
fwohci0: vendor=1180, dev=832
fwohci0.pci5.pcib3.pci0.pcib0.legacypci0.nexus0.root0
fwohci0: <1394 Open Host Controller Interface> [tentative] mem 0xd7efe800-0xd7efefff irq 11 at device 0.1 on pci5
fwohci0: latency timer 0 -> 32.
fwohci0: cache size 0 -> 8.
pcib3: device fwohci0 requested decoded memory range 0xd7efe800-0xd7efefff
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:16:d3:ff:ff:c2:f7:57
fwohci0: resetting OHCI...done (loop=0)
fwohci0: fwphy_rddata: 0x2 loop=27, retry=0
fwohci0: fwphy_rddata: 0x3 loop=1, retry=0
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: fwphy_rddata: 0x5 loop=1, retry=0
fwohci0: Enable 1394a Enhancements
fwohci0: fwphy_rddata: 0x5 loop=1, retry=0
fwohci0: fwphy_rddata: 0x2 loop=1, retry=0
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
fwohci0: Link S400, max_rec 2048 bytes.
fwohci0: BUS_OPT 0xf800a002 -> 0xf800a002
fwohci0: fwohci_set_intr: 1
firewire0.fwohci0.pci5.pcib3.pci0.pcib0.legacypci0.nexus0.root0
firewire0: <IEEE1394(FireWire) bus> [tentative] on fwohci0
fwe0.firewire0.fwohci0.pci5.pcib3.pci0.pcib0.legacypci0.nexus0.root0
fwe0: <Ethernet over FireWire> [tentative] on firewire0
fwe0: bpf attached
fwe0: MAC address: 02:16:d3:c2:f7:57
fwe0: <Ethernet over FireWire> [attached!] on firewire0
sbp0.firewire0.fwohci0.pci5.pcib3.pci0.pcib0.legacypci0.nexus0.root0
sbp0: <SBP-2/SCSI over FireWire> [tentative] on firewire0
sbp_attach (cold=1)
sbp0: <SBP-2/SCSI over FireWire> [attached!] on firewire0
sbp_post_busreset
fwohci0: Initiate bus reset
fwohci0: fwphy_rddata: 0x1 loop=1, retry=0
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
fwohci0: fw_set_bus_manager: 0->0 (loop=0)
firewire0: bus manager 0 (me)
send phy_config root_node=-1 gap_count=5
fwohci0: maxdesc: 2
fwohci0: start AT DMA status=0
Current DB 0
ch = 0
 Current OP   KEY INT BR   len     Addr   Depend Stat: Cnt
3c4bc000 OUTL ST2 ALL ALL    12 00000000 3c4bc080 8411:000a RUN,ACTIVE, ack complete(11)
0x000000e0 0x00450000 0xffbaffff 0x00000000
fwohci0: fwphy_rddata: 0x1 loop=1, retry=0
firewire0: <IEEE1394(FireWire) bus> [attached!] on fwohci0
fwohci0: <1394 Open Host Controller Interface> [attached!] mem 0xd7efe800-0xd7efefff irq 11 at device 0.1 on pci5
pci5: <unknown card> (vendor=0x1180, dev=0x0822) at 0.2 irq 11
pci5: <PCI bus> [attached!] on pcib3
pcib3: <PCI to PCI bridge (vendor=8086 device=2448)> [attached!] at device 30.0 on pci0
isab0.pci0.pcib0.legacypci0.nexus0.root0
isab0: <PCI to ISA bridge (vendor=8086 device=2811)> [tentative] at device 31.0 on pci0
isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
isa0: <ISA bus> [tentative] on isab0
isa0: <ISA bus> [attached!] on isab0
isab0: <PCI to ISA bridge (vendor=8086 device=2811)> [attached!] at device 31.0 on pci0
atapci0.pci0.pcib0.legacypci0.nexus0.root0
atapci0: <GENERIC ATA controller> [tentative] port 0x18e0-0x18ef,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata0: <ATA channel 0> [tentative] on atapci0
atapci0: reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=7f ostat1=7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: reset tp2 stat0=ff stat1=ff devices=0x0
ata0: <ATA channel 0> [attached!] on atapci0
ata1.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata1: <ATA channel 1> [tentative] on atapci0
atapci0: reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ata1: <ATA channel 1> [attached!] on atapci0
atapci0: <GENERIC ATA controller> [attached!] port 0x18e0-0x18ef,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
atapci1.pci0.pcib0.legacypci0.nexus0.root0
atapci1: <Intel ICH8M SATA300 controller> [tentative] port 0x1c00-0x1c1f,0x1c20-0x1c23,0x1c28-0x1c2f,0x1c24-0x1c27,0x1c30-0x1c37 mem 0xf8426000-0xf84267ff irq 10 at device 31.2 on pci0
atapci1: AHCI Version 01.10 controller with 3 ports detected
ata2.atapci1.pci0.pcib0.legacypci0.nexus0.root0
ata2: <ATA channel 0> [tentative] on atapci1
intr 10 at 40001/40000 hz, livelocked limit engaged!
ata2: SATA connect time=0ms
ata2: ahci_reset devices=0x1<ATA_MASTER>
bus_explore done
sbp_post_explore
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
intr 10 at 40014/20000 hz, in livelock
sched_ithd: stray interrupt 7 on cpu 0
ad4: Intel check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
ad4: 76319MB <HITACHI HTS541680J9SA00 SB2IC7UP> at ata2-master SATA150
ad4: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue
ata2: <ATA channel 0> [attached!] on atapci1
ata3.atapci1.pci0.pcib0.legacypci0.nexus0.root0
ata3: <ATA channel 1> [tentative] on atapci1
ata3: port not implemented
ata3: <ATA channel 1> [attached!] on atapci1
ata4.atapci1.pci0.pcib0.legacypci0.nexus0.root0
ata4: <ATA channel 2> [tentative] on atapci1
ata4: port not implemented
ata4: <ATA channel 2> [attached!] on atapci1
atapci1: <Intel ICH8M SATA300 controller> [attached!] port 0x1c00-0x1c1f,0x1c20-0x1c23,0x1c28-0x1c2f,0x1c24-0x1c27,0x1c30-0x1c37 mem 0xf8426000-0xf84267ff irq 10 at device 31.2 on pci0
pci0: <unknown card> (vendor=0x8086, dev=0x283e) at 31.3 irq 11
pci0: <PCI bus> [attached!] on pcib0
pcib0: <Host to PCI bridge> [attached!] on legacypci0
legacypci0 [attached!] on motherboard
sched_ithd: stray interrupt 7 on cpu 0
sched_ithd: stray interrupt 7 on cpu 0
ex_isa_identify()
atkbdc-: atkbdc0 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
sched_ithd: stray interrupt 7 on cpu 0
Trying Read_Port at 283
sched_ithd: stray interrupt 7 on cpu 0
Trying Read_Port at 2c3
sched_ithd: stray interrupt 7 on cpu 0
sched_ithd: stray interrupt 7 on cpu 0
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ahc_isa_probe 1: ioport 0x1c00 alloc failed
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
pmtimer0 [tentative] on isa0
pmtimer0 [attached!] on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 [tentative] failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
adv0 [tentative] failed to probe on isa0
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 [tentative] failed to probe at port 0x134-0x137 on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 [tentative] failed to probe at port 0x134-0x137 on isa0
aic0 [tentative] failed to probe at port 0x140-0x15f on isa0
atkbdc1: <Keyboard controller (i8042)> [tentative] failed to probe at port 0x60 on isa0
vga0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
sc0: <System console> [tentative] at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sc0: <System console> [attached!] at flags 0x100 on isa0
lm0 [tentative] failed to probe at port 0x290-0x297 on isa0
it0 [tentative] failed to probe at port 0x290-0x297 on isa0
it1 [tentative] failed to probe at port 0xc00-0xc07 on isa0
it2 [tentative] failed to probe at port 0xd00-0xd07 on isa0
sio0: can't drain, serial port might not exist, disabling
sio0 [tentative] failed to probe at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio1: can't drain, serial port might not exist, disabling
sio1 [tentative] failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> [tentative] failed to probe at irq 7 on isa0
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
cs0: not probed (disabled)
sn0: not probed (disabled)
isa_probe_children: probing PnP devices
BIOS Geometries:
 0:03feef3f 0..1022=1023 cylinders, 0..239=240 heads, 1..63=63 sectors
 0 accounted for
Device configuration finished.
sl0: bpf attached
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
faith0: bpf attached
lo0: bpf attached
ppp0: bpf attached
intr 10 at 10/20000 hz, livelock removed
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
bootdev: a0200000 type=0 unit=0 slice=2 part=0 major=3
ATA PseudoRAID loaded
Mounting root from ufs:/dev/ad4s1a
ad4s1: type 0xa5, start 63, end = 156296447, size 156296385 : OK
start_init: trying /sbin/init