|From:||Úlfar Ellenarson <uel@xxxxxxxxxxx>|
|Date:||Wed, 23 Feb 2011 13:47:56 +0000|
Thanks Alex. I will definitely add the screenshots. However, being at work now I will not be able to post them until later today. I have not used imageshack before, but I reckon it can not be too difficult to use. I do not know if VirtualBox supports disk serial numbers, but I will mark that down as things to do today.
The issue boils down to VirtualBox not having the same serial numbers for disks as vmware does. You should be able to figure out which one the right one is by listing the da* and ad* devices in /dev from a live CD. Alternatively, if VirtualBox supports disk serial numbers, doing ls /dev/serno will yield the information, as others have told you.
By the way, if you have attached screenshots, they definitely haven't arrived here Can you please repost them somehow, possibly on imageshack or so and providing a link?
On 23 February 2011 12:27, Úlfar Ellenarson <firstname.lastname@example.org> wrote:
Thank you for your posts and help. I have taken a screenshot of the mounted etc/fstab or better said /mnt/etc/fstab and I have also ls –l /mnt/dev/serno. The only thing is I have not looked into the loader.conf which I reckon is mostly likely either in /boot or /etc. I think the problem is that dragonflybsd is not creating the devices upon boot because I have moved the system from vmware workstation 6.5 to virtualbox 4.04. I have looked into the man 8 boot page, however there is considerably less information about dragonfly bsd on the web than linux. I have converted linux physical machines using rsync, cpio, and netcat to vmware, but I have little experience with dragonfly.
2011/2/23 Úlfar Ellenarson <email@example.com>
Added information regarding boot problem.
The message upon boot is:
Mounting root from hammer:serno/000000000000000000001.s1d
no disk named 'serno/00000000000000000000001.s1d'
hammer_mountroot: can't find devvp
boot mount failed: 6
My first time posting on this list. My problem in a nutshell is I installed dragonfly bsd 2.8 in vmware workstation. I reinstalled the host system that vmware workstation was on and decided on using virtualbox. I imported my dragonfly bsd vmware workstatation vmdk files into virtualbox. Upon boot in virtualbox I run into the problem of mounting the disk. I am prompted at the boot prompt to detect the disk that the system resides on. I have tried hammer:ad0s1, hammer:ad0s1a, hammer:ad0s1d and just ad0s1. I am however not able to boot the system. I have also booted from the live iso image and mounted the system manually into /mnt using mount_hammer /dev/ad0s1a /mnt and took a screenshot of /etc/fstab. I however ask if there is a simple way to fix my mount problem. Any information needed in regards to solving this problem will be gladly appended.
kær kveðju/kind regards,