DragonFly BSD
DragonFly users List (threaded) for 2011-02
[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]

Re: Boot hang with GENERIC_SMP kernel on x86-64


From: Neil Booth <neil@xxxxxxxxxxxxxxx>
Date: Wed, 9 Feb 2011 08:21:09 +0900

Neil Booth wrote:-

> Antonio Huete Jimenez wrote:-
> 
> > Ah dmesg attached, I didn't see it.
> > 
> > Can you please attach a SMP verbose boot?
> 
> I'd be glad to but how can I capture that output?
> 
> Incidentally I omitted to mention that i386 SMP was fine on this
> machine.

OK well I managed to capture it, attached.

The hangs are random.  Several times previously consecutively 
without -v it hung immediately after

    CAM: Configuring 4 busses

however trying again without -v this morning it succeeded, and
trying then with -v it hung immediately after

    ad6: type 0xa5, start 63, end = 1250258687, size 1250258625 : OK

instead, and the third boot with -v succeeded to login again.
This is the attached output.

Happy to help debug / rebuild / reboot etc.

Neil.
Copyright (c) 2003-2011 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly v2.9.1.650.g4e6c6-DEVELOPMENT #0: Mon Feb  7 21:44:55 JST 2011
    root@athlon2.akihabara.co.uk:/usr/obj/usr/src/sys/X86_64_GENERIC_SMP
Calibrating clock(s) ... TSC clock: 2600168521 Hz, i8254 clock: 1193194 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: AMD Athlon(tm) Dual Core Processor 5050e (2600.16-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x60fb2  Stepping = 2
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
  Cores per package: 2
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory  = 4025809920 (3839 MB)
Physical memory chunk(s):
0x00020000 - 0x0007ffff, 393216 bytes (96 pages)
0x01a60000 - 0xcff9ffff, 3461611520 bytes (845120 pages)
0x100000000 - 0x11ffdffff, 536739840 bytes (131040 pages)
avail memory = 3743608832 (3570 MB)
ELCR Found.  ISA IRQs programmed as:
  0  1  2  3  4  5  6  7  8  9 10 11 12 13 14 15
  E  E  E  E  E  E  E  E  E  E  L  L  E  E  E  E
ACPI MADT: RSDP not in EBDA
ACPI MADT: RSDP in BIOS mem
ACPI MADT: MADT in RSDT
ACPI MADT: LAPIC address 0xfee00000, flags 0x1
lapic: at 0xfee00000
ACPI MADT: BSP apic id 0
ACPI MADT: cpu_id 1, apic_id 0
ACPI MADT: cpu_id 2, apic_id 1
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 1 -> irq 1 (CPU0)
IOAPIC #0 intpin 2 -> irq 0 (CPU0)
IOAPIC #0 intpin 3 -> irq 3 (CPU0)
IOAPIC #0 intpin 4 -> irq 4 (CPU0)
IOAPIC #0 intpin 5 -> irq 5 (CPU0)
IOAPIC #0 intpin 6 -> irq 6 (CPU0)
IOAPIC #0 intpin 7 -> irq 7 (CPU0)
IOAPIC #0 intpin 8 -> irq 8 (CPU0)
IOAPIC #0 intpin 9 -> irq 9 (CPU0)
IOAPIC #0 intpin 12 -> irq 12 (CPU0)
IOAPIC #0 intpin 13 -> irq 13 (CPU0)
IOAPIC #0 intpin 14 -> irq 14 (CPU0)
IOAPIC #0 intpin 15 -> irq 15 (CPU0)
IOAPIC #0 intpin 16 -> irq 11 (CPU0)
IOAPIC #0 intpin 17 -> irq 16 (CPU0)
IOAPIC #0 intpin 18 -> irq 2 (CPU0)
IOAPIC #0 intpin 19 -> irq 10 (CPU0)
IOAPIC #0 intpin 22 -> irq 17 (CPU0)
lapic: divisor index 0, frequency 100005827 Hz
SMP: CPU0 apic_initialize():
     lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
SMP: CPU0 ioapic_finalize():
     lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
SMP: Starting 1 APs: DragonFly/MP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  0, version: 0x80050010
 cpu1 (AP):  apic id:  1, version: 0x80050010
 io0 (APIC): apic id:  2, version: 0x00178021, at 0xfec00000
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Finish MP startup
 1SMP: CPU1 apic_initialize():
     lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff

Active CPU Mask: 0000000000000003
objcache(exec-args): too small for ncpus, adjusting cluster_limit 16->32
Preloaded elf kernel "kernel" at 0xffffffff814ea000.
Preloaded elf obj module "acpi.ko" at 0xffffffff814ea2a0.
Preloaded elf obj module "ehci.ko" at 0xffffffff814eac38.
start scheduler helpers on cpus: 0 1
start dummy scheduler helpers on cpus: 0 1
FQ scheduler policy version 1.0 loaded
wlan: <802.11 Link Layer>
No policy for md0 specified, or policy not found
disk scheduler: set policy of md0 to noop
md0: Malloc disk
kbd0 at kbdmux0
crypto: <crypto core>
md0: invalid primary partition table: no magic
ACPI: RSDP 0xf9910 00014 (v0 ACPIAM)
ACPI: RSDT 0xcffb0000 00038 (v1 100808 RSDT1710 20081008 MSFT 00000097)
ACPI: FACP 0xcffb0200 00084 (v2 100808 FACP1710 20081008 MSFT 00000097)
ACPI: DSDT 0xcffb0440 04D17 (v1  RS78E RS78E27A 0000027A INTL 20051117)
ACPI: FACS 0xcffbe000 00040
ACPI: APIC 0xcffb0390 0006C (v1 100808 APIC1710 20081008 MSFT 00000097)
ACPI: MCFG 0xcffb0400 0003C (v1 100808 OEMMCFG  20081008 MSFT 00000097)
ACPI: OEMB 0xcffbe040 00071 (v1 100808 OEMB1710 20081008 MSFT 00000097)
ACPI: HPET 0xcffb5160 00038 (v1 100808 OEMHPET  20081008 MSFT 00000097)
cryptosoft0.nexus0.root0
cryptosoft0: <software crypto> [tentative] on motherboard
crypto: assign cryptosoft0 driver id 0, flags 234881024
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
cryptosoft0: <software crypto> [attached!] on motherboard
acpi0.nexus0.root0
acpi0: <100808 RSDT1710> [tentative] on motherboard
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device.  You can't run both
pci_open(1):	mode 1 addr port (0x0cf8) is 0x8000a080
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=96001022)
AcpiOsDerivePciId: bus 0 dev 0 func 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
ACPI HPET table warning: Sequence is non-zero (2)
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks BAD  min = 5, max = 10, width = 5
ACPI timer looks BAD  min = 5, max = 10, width = 5
ACPI timer looks GOOD min = 5, max = 6, width = 1
ACPI timer looks BAD  min = 5, max = 10, width = 5
ACPI timer looks BAD  min = 5, max = 10, width = 5
ACPI timer looks BAD  min = 5, max = 10, width = 5
ACPI timer looks GOOD min = 5, max = 6, width = 1
ACPI timer looks BAD  min = 5, max = 10, width = 5
acpi_timer0.acpi0.nexus0.root0
acpi_timer0: <32-bit timer at 3.579545MHz> [tentative] port 0x808-0x80b on acpi0
acpi_timer0: <32-bit timer at 3.579545MHz> [attached!] port 0x808-0x80b on acpi0
acpi_hpet0.acpi0.nexus0.root0
acpi_hpet0: <High Precision Event Timer> [tentative] iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x4353, rev: 0x1, num: 3, opts: legacy_route
acpi_hpet0: frequency 14318180
acpi_hpet0: <High Precision Event Timer> [attached!] iomem 0xfed00000-0xfed003ff on acpi0
acpi_button0.acpi0.nexus0.root0
acpi_button0: <Power Button> [tentative] on acpi0
acpi_button0: <Power Button> [attached!] on acpi0
atkbdc0.acpi0.nexus0.root0
atkbdc0: <Keyboard controller (i8042)> [tentative] port 0x64,0x60 irq 1 on acpi0
psm0: current command byte:0065
psm0: failed to reset the aux device.
atkbdc0: <Keyboard controller (i8042)> [attached!] port 0x64,0x60 irq 1 on acpi0
unknown: not probed (disabled)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0.acpi0.nexus0.root0
sio0: <16550A-compatible COM port> [tentative] port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio0: <16550A-compatible COM port> [attached!] port 0x3f8-0x3ff irq 4 on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
cpu0.acpi0.nexus0.root0
cpu0: <ACPI CPU> [tentative] on acpi0
cpu_cst0.cpu0.acpi0.nexus0.root0
cpu_cst0: <ACPI CPU C-State> [tentative] on cpu0
cpu_cst0: switching to generic Cx mode
cpu_cst0: <ACPI CPU C-State> [attached!] on cpu0
cpu_pst0: Can't get _PCT package - AE_NOT_FOUND
cpu0: <ACPI CPU> [attached!] on acpi0
cpu1.acpi0.nexus0.root0
cpu1: <ACPI CPU> [tentative] on acpi0
cpu_cst1.cpu1.acpi0.nexus0.root0
cpu_cst1: <ACPI CPU C-State> [tentative] on cpu1
cpu_cst1: <ACPI CPU C-State> [attached!] on cpu1
cpu_pst1: Can't get _PCT package - AE_NOT_FOUND
cpu1: <ACPI CPU> [attached!] on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
acpi0: <100808 RSDT1710> [attached!] at port 0xa00-0xa0f,0xa10-0xa1f,0x10-0x1f,0x22-0x3f,0x62-0x63,0x65-0x6f,0x72-0x7f,0x80,0x84-0x86,0x88,0x8c-0x8e,0x90-0x9f,0xa2-0xbf,0xb1,0xe0-0xef,0x4d0-0x4d1,0x40b,0x4d6,0xc00-0xc01,0xc14,0xc50-0xc51,0xc52,0xc6c,0xc6f,0xcd0-0xcd1,0xcd2-0xcd3,0xcd4-0xcd5,0xcd6-0xcd7,0xcd8-0xcdf,0x800-0x89f,0xb00-0xb0f,0xb20-0xb3f,0x900-0x90f,0x910-0x91f,0xfe00-0xfefe iomem 0-0x9ffff,0xc0000-0xcffff,0xe0000-0xfffff,0x100000-0xcfffffff,0xfec00000-0xffffffff,0xe0000000-0xefffff
ff,0xffb80000-0xffbfffff,0xfec10000-0xfec1001f,0xfec00000-0xfec00fff,0xfee00000-0xfee00fff irq 9 on motherboard
pcib0.legacy0.nexus0.root0
pcib0: <MPTable Host-PCI bridge> [tentative] pcibus 0 on motherboard
pci0.pcib0.legacy0.nexus0.root0
pci0: <PCI bus> [tentative] on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x1022, dev=0x9600, revid=0x00
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x9602, revid=0x00
	domain=0, bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0230, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x9609, revid=0x00
	domain=0, bus=0, slot=10, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message
	PCI Express ver.2 cap=0x0142
found->	vendor=0x1002, dev=0x4390, revid=0x00
	domain=0, bus=0, slot=17, func=0
	class=01-01-8f, hdrtype=0x00, mfdev=0
	cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type I/O Port, range 32, base 0xc000, size  3, enabled
	map[14]: type I/O Port, range 32, base 0xb000, size  2, enabled
	map[18]: type I/O Port, range 32, base 0xa000, size  3, enabled
	map[1c]: type I/O Port, range 32, base 0x9000, size  2, enabled
	map[20]: type I/O Port, range 32, base 0x8000, size  4, enabled
	map[24]: type Memory, range 32, base 0xfe8ff800, size 10, enabled
found->	vendor=0x1002, dev=0x4397, revid=0x00
	domain=0, bus=0, slot=18, func=0
	class=0c-03-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	map[10]: type Memory, range 32, base 0xfe8fe000, size 12, enabled
found->	vendor=0x1002, dev=0x4398, revid=0x00
	domain=0, bus=0, slot=18, func=1
	class=0c-03-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	map[10]: type Memory, range 32, base 0xfe8fd000, size 12, enabled
found->	vendor=0x1002, dev=0x4396, revid=0x00
	domain=0, bus=0, slot=18, func=2
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0102, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xfe8ff000, size  8, enabled
found->	vendor=0x1002, dev=0x4397, revid=0x00
	domain=0, bus=0, slot=19, func=0
	class=0c-03-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	map[10]: type Memory, range 32, base 0xfe8fc000, size 12, enabled
found->	vendor=0x1002, dev=0x4398, revid=0x00
	domain=0, bus=0, slot=19, func=1
	class=0c-03-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	map[10]: type Memory, range 32, base 0xfe8fb000, size 12, enabled
found->	vendor=0x1002, dev=0x4396, revid=0x00
	domain=0, bus=0, slot=19, func=2
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xfe8fa800, size  8, enabled
found->	vendor=0x1002, dev=0x4385, revid=0x3a
	domain=0, bus=0, slot=20, func=0
	class=0c-05-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0403, statreg=0xd230, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1002, dev=0x439c, revid=0x00
	domain=0, bus=0, slot=20, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0230, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	MSI supports 2 messages
	map[20]: type I/O Port, range 32, base 0xff00, size  4, enabled
found->	vendor=0x1002, dev=0x4383, revid=0x00
	domain=0, bus=0, slot=20, func=2
	class=04-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0410, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 64, base 0xfe8f4000, size 14, enabled
found->	vendor=0x1002, dev=0x439d, revid=0x00
	domain=0, bus=0, slot=20, func=3
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1002, dev=0x4384, revid=0x00
	domain=0, bus=0, slot=20, func=4
	class=06-04-01, hdrtype=0x01, mfdev=1
	cmdreg=0x0105, statreg=0x02a0, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1002, dev=0x4399, revid=0x00
	domain=0, bus=0, slot=20, func=5
	class=0c-03-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=10
	map[10]: type Memory, range 32, base 0xfe8f9000, size 12, enabled
found->	vendor=0x1022, dev=0x1100, revid=0x00
	domain=0, bus=0, slot=24, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1101, revid=0x00
	domain=0, bus=0, slot=24, func=1
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1102, revid=0x00
	domain=0, bus=0, slot=24, func=2
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1103, revid=0x00
	domain=0, bus=0, slot=24, func=3
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib1.pci0.pcib0.legacy0.nexus0.root0
pcib1: <MPTable PCI-PCI bridge> [tentative] at device 1.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xd000-0xdfff
pcib1:   memory decode     0xfe900000-0xfeafffff
pcib1:   prefetched decode 0xd0000000-0xdfffffff
pci1.pcib1.pci0.pcib0.legacy0.nexus0.root0
pci1: <PCI bus> [tentative] on pcib1
pci1: domain=0, physical bus=1
found->	vendor=0x1002, dev=0x9610, revid=0x00
	domain=0, bus=1, slot=5, func=0
	class=03-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 3  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Prefetchable Memory, range 32, base 0xd0000000, size 28, enabled
pcib1: requested memory range 0xd0000000-0xdfffffff: good
	map[14]: type I/O Port, range 32, base 0xd000, size  8, enabled
pcib1: requested I/O range 0xd000-0xd0ff: in range
	map[18]: type Memory, range 32, base 0xfeaf0000, size 16, enabled
pcib1: requested memory range 0xfeaf0000-0xfeafffff: good
	map[24]: type Memory, range 32, base 0xfe900000, size 20, enabled
pcib1: requested memory range 0xfe900000-0xfe9fffff: good
found->	vendor=0x1002, dev=0x960f, revid=0x00
	domain=0, bus=1, slot=5, func=1
	class=04-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	powerspec 3  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 32, base 0xfeae8000, size 14, enabled
pcib1: requested memory range 0xfeae8000-0xfeaebfff: good
vgapci0.pci1.pcib1.pci0.pcib0.legacy0.nexus0.root0
vgapci0: <VGA-compatible display> [tentative] port 0xd000-0xd0ff mem 0xfe900000-0xfe9fffff,0xfeaf0000-0xfeafffff,0xd0000000-0xdfffffff irq 2 at device 5.0 on pci1
vgapci0: <VGA-compatible display> [attached!] port 0xd000-0xd0ff mem 0xfe900000-0xfe9fffff,0xfeaf0000-0xfeafffff,0xd0000000-0xdfffffff irq 2 at device 5.0 on pci1
pci1: <multimedia, HDA> (vendor 0x1002, dev 0x960f) at device 5.1 irq 10
pci1: <PCI bus> [attached!] on pcib1
pcib1: <MPTable PCI-PCI bridge> [attached!] at device 1.0 on pci0
pcib2.pci0.pcib0.legacy0.nexus0.root0
pcib2: <MPTable PCI-PCI bridge> [tentative] irq 2 at device 10.0 on pci0
pcib2:   domain            0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0xe000-0xefff
pcib2:   memory decode     0xfeb00000-0xfebfffff
pcib2:   no prefetched decode
pci2.pcib2.pci0.pcib0.legacy0.nexus0.root0
pci2: <PCI bus> [tentative] on pcib2
pci2: domain=0, physical bus=2
found->	vendor=0x11ab, dev=0x4364, revid=0x14
	domain=0, bus=2, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 3  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	PCI Express ver.1 cap=0x0011[LEGDEV]
	map[10]: type Memory, range 64, base 0xfebfc000, size 14, enabled
pcib2: requested memory range 0xfebfc000-0xfebfffff: good
	map[18]: type I/O Port, range 32, base 0xe800, size  8, enabled
pcib2: requested I/O range 0xe800-0xe8ff: in range
mskc0.pci2.pcib2.pci0.pcib0.legacy0.nexus0.root0
mskc0: <Marvell Yukon 88E8056 Gigabit Ethernet> [tentative] port 0xe800-0xe8ff mem 0xfebfc000-0xfebfffff irq 2 at device 0.0 on pci2
mskc0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xfebfc000
mskc0: RAM buffer size : 128KB
mskc0: Port 0 : Rx Queue 85KB(0x00000000:0x000153ff)
mskc0: Port 0 : Tx Queue 43KB(0x00015400:0x0001ffff)
msk0.mskc0.pci2.pcib2.pci0.pcib0.legacy0.nexus0.root0
msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x05> [tentative] on mskc0
miibus0.msk0.mskc0.pci2.pcib2.pci0.pcib0.legacy0.nexus0.root0
miibus0: <MII bus> [tentative] on msk0
e1000phy0.miibus0.msk0.mskc0.pci2.pcib2.pci0.pcib0.legacy0.nexus0.root0
e1000phy0: <Marvell 88E1149 Gigabit PHY> [tentative] on miibus0
e1000phy0: 1000baseT-FDX, 100baseTX-FDX, 100baseTX, 10baseTX-FDX, 10baseTX, auto
e1000phy0: <Marvell 88E1149 Gigabit PHY> [attached!] on miibus0
miibus0: <MII bus> [attached!] on msk0
msk0: bpf attached
msk0: MAC address: 00:ea:01:03:cc:bb
msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x05> [attached!] on mskc0
mskc0: <Marvell Yukon 88E8056 Gigabit Ethernet> [attached!] port 0xe800-0xe8ff mem 0xfebfc000-0xfebfffff irq 2 at device 0.0 on pci2
pci2: <PCI bus> [attached!] on pcib2
pcib2: <MPTable PCI-PCI bridge> [attached!] irq 2 at device 10.0 on pci0
atapci0.pci0.pcib0.legacy0.nexus0.root0
atapci0: <ATI ATA controller> [tentative] port 0x8000-0x800f,0x9000-0x9003,0xa000-0xa007,0xb000-0xb003,0xc000-0xc007 mem 0xfe8ff800-0xfe8ffbff irq 17 at device 17.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x8000
ata2.atapci0.pci0.pcib0.legacy0.nexus0.root0
ata2: <ATA channel 0> [tentative] on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xc000
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xb000
ata2: reset tp1 mask=03 ostat0=50 ostat1=00
ata2: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata2: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
No policy for acd0 specified, or policy not found
disk scheduler: set policy of acd0 to noop
acd0: <Optiarc DVD RW AD-7203S/1.J1> DVDR drive at ata2 as master
acd0: read 8268KB/s (8268KB/s) write 8268KB/s (8268KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata2: <ATA channel 0> [attached!] on atapci0
ata3.atapci0.pci0.pcib0.legacy0.nexus0.root0
ata3: <ATA channel 1> [tentative] on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xa000
atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0x9000
ata3: reset tp1 mask=03 ostat0=50 ostat1=00
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
No policy for ad6 specified, or policy not found
disk scheduler: set policy of ad6 to noop
ad6: Silicon Image check3 failed
ad6: Adaptec check1 failed
ad6: LSI (v3) check1 failed
ad6: LSI (v2) check1 failed
ad6: FreeBSD check1 failed
ad6: 610480MB <SAMSUNG HD642JI 1AA01111> at ata3-master UDMA33
ad6: 1250263728 sectors [1240341C/16H/63S] 16 sectors/interrupt 1 depth queue
ata3: <ATA channel 1> [attached!] on atapci0
atapci0: <ATI ATA controller> [attached!] port 0x8000-0x800f,0x9000-0x9003,0xa000-0xa007,0xb000-0xb003,0xc000-0xc007 mem 0xfe8ff800-0xfe8ffbff irq 17 at device 17.0 on pci0
ohci0.pci0.pcib0.legacy0.nexus0.root0
ohci0: <OHCI (generic) USB controller> [tentative] mem 0xfe8fe000-0xfe8fefff irq 11 at device 18.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe8fe000
usb0: OHCI version 1.0, legacy support
usb0.ohci0.pci0.pcib0.legacy0.nexus0.root0
usb0: <OHCI (generic) USB controller> [tentative] on ohci0
usb0: USB revision 1.0
uhub0.usb0.ohci0.pci0.pcib0.legacy0.nexus0.root0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb0
uhub0: 3 ports with 3 removable, self powered
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb0
usb0: <OHCI (generic) USB controller> [attached!] on ohci0
ohci0: <OHCI (generic) USB controller> [attached!] mem 0xfe8fe000-0xfe8fefff irq 11 at device 18.0 on pci0
ohci1.pci0.pcib0.legacy0.nexus0.root0
ohci1: <OHCI (generic) USB controller> [tentative] mem 0xfe8fd000-0xfe8fdfff irq 11 at device 18.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe8fd000
usb1: OHCI version 1.0, legacy support
usb1.ohci1.pci0.pcib0.legacy0.nexus0.root0
usb1: <OHCI (generic) USB controller> [tentative] on ohci1
usb1: USB revision 1.0
uhub1.usb1.ohci1.pci0.pcib0.legacy0.nexus0.root0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb1
uhub1: 3 ports with 3 removable, self powered
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb1
usb1: <OHCI (generic) USB controller> [attached!] on ohci1
ohci1: <OHCI (generic) USB controller> [attached!] mem 0xfe8fd000-0xfe8fdfff irq 11 at device 18.1 on pci0
ehci0.pci0.pcib0.legacy0.nexus0.root0
ehci0: <EHCI (generic) USB 2.0 controller> [tentative] mem 0xfe8ff000-0xfe8ff0ff irq 16 at device 18.2 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe8ff000
ehci0: Dropped interrupts workaround enabled
usb2: EHCI version 1.0
usb2: companion controllers, 3 ports each: usb0 usb1
usb2.ehci0.pci0.pcib0.legacy0.nexus0.root0
usb2: <EHCI (generic) USB 2.0 controller> [tentative] on ehci0
usb2: USB revision 2.0
uhub2.usb2.ehci0.pci0.pcib0.legacy0.nexus0.root0
uhub2: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> [tentative] on usb2
uhub2: 6 ports with 6 removable, self powered
uhub2: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> [attached!] on usb2
usb2: <EHCI (generic) USB 2.0 controller> [attached!] on ehci0
ehci0: <EHCI (generic) USB 2.0 controller> [attached!] mem 0xfe8ff000-0xfe8ff0ff irq 16 at device 18.2 on pci0
ohci2.pci0.pcib0.legacy0.nexus0.root0
ohci2: <OHCI (generic) USB controller> [tentative] mem 0xfe8fc000-0xfe8fcfff irq 2 at device 19.0 on pci0
ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe8fc000
usb3: OHCI version 1.0, legacy support
usb3.ohci2.pci0.pcib0.legacy0.nexus0.root0
usb3: <OHCI (generic) USB controller> [tentative] on ohci2
usb3: USB revision 1.0
uhub3.usb3.ohci2.pci0.pcib0.legacy0.nexus0.root0
uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb3
uhub3: 3 ports with 3 removable, self powered
uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb3
usb3: <OHCI (generic) USB controller> [attached!] on ohci2
ohci2: <OHCI (generic) USB controller> [attached!] mem 0xfe8fc000-0xfe8fcfff irq 2 at device 19.0 on pci0
ohci3.pci0.pcib0.legacy0.nexus0.root0
ohci3: <OHCI (generic) USB controller> [tentative] mem 0xfe8fb000-0xfe8fbfff irq 2 at device 19.1 on pci0
ohci3: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe8fb000
usb4: OHCI version 1.0, legacy support
usb4.ohci3.pci0.pcib0.legacy0.nexus0.root0
usb4: <OHCI (generic) USB controller> [tentative] on ohci3
usb4: USB revision 1.0
uhub4.usb4.ohci3.pci0.pcib0.legacy0.nexus0.root0
uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb4
uhub4: 3 ports with 3 removable, self powered
uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb4
usb4: <OHCI (generic) USB controller> [attached!] on ohci3
ohci3: <OHCI (generic) USB controller> [attached!] mem 0xfe8fb000-0xfe8fbfff irq 2 at device 19.1 on pci0
ehci1.pci0.pcib0.legacy0.nexus0.root0
ehci1: <EHCI (generic) USB 2.0 controller> [tentative] mem 0xfe8fa800-0xfe8fa8ff irq 10 at device 19.2 on pci0
ehci1: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe8fa800
ehci1: Dropped interrupts workaround enabled
usb5: EHCI version 1.0
usb5: companion controllers, 3 ports each: usb3 usb4
usb5.ehci1.pci0.pcib0.legacy0.nexus0.root0
usb5: <EHCI (generic) USB 2.0 controller> [tentative] on ehci1
usb5: USB revision 2.0
uhub5.usb5.ehci1.pci0.pcib0.legacy0.nexus0.root0
uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> [tentative] on usb5
uhub5: 6 ports with 6 removable, self powered
uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> [attached!] on usb5
usb5: <EHCI (generic) USB 2.0 controller> [attached!] on ehci1
ehci1: <EHCI (generic) USB 2.0 controller> [attached!] mem 0xfe8fa800-0xfe8fa8ff irq 10 at device 19.2 on pci0
pci0: <serial bus, SMBus> (vendor 0x1002, dev 0x4385) at device 20.0
atapci1.pci0.pcib0.legacy0.nexus0.root0
atapci1: <ATI ATA controller> [tentative] port 0xff00-0xff0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 20.1 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xff00
ata0.atapci1.pci0.pcib0.legacy0.nexus0.root0
ata0: <ATA channel 0> [tentative] on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=7f ostat1=7f
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata0: reset tp2 stat0=ff stat1=ff devices=0x0
ata0: <ATA channel 0> [attached!] on atapci1
ata1.atapci1.pci0.pcib0.legacy0.nexus0.root0
ata1: <ATA channel 1> [tentative] on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=7f ostat1=7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: reset tp2 stat0=ff stat1=ff devices=0x0
ata1: <ATA channel 1> [attached!] on atapci1
atapci1: <ATI ATA controller> [attached!] port 0xff00-0xff0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 20.1 on pci0
pci0: <multimedia, HDA> (vendor 0x1002, dev 0x4383) at device 20.2 irq 11
isab0.pci0.pcib0.legacy0.nexus0.root0
isab0: <PCI-ISA bridge> [tentative] at device 20.3 on pci0
isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
isa0: <ISA bus> [tentative] on isab0
isa0: <ISA bus> [attached!] on isab0
isab0: <PCI-ISA bridge> [attached!] at device 20.3 on pci0
pcib3.pci0.pcib0.legacy0.nexus0.root0
pcib3: <MPTable PCI-PCI bridge> [tentative] at device 20.4 on pci0
pcib3:   domain            0
pcib3:   secondary bus     3
pcib3:   subordinate bus   3
pcib3:   I/O decode        0xf000-0xfff
pcib3:   no prefetched decode
pcib3:   Subtractively decoded bridge.
pci3.pcib3.pci0.pcib0.legacy0.nexus0.root0
pci3: <PCI bus> [tentative] on pcib3
pci3: domain=0, physical bus=3
pci3: <PCI bus> [attached!] on pcib3
pcib3: <MPTable PCI-PCI bridge> [attached!] at device 20.4 on pci0
ohci4.pci0.pcib0.legacy0.nexus0.root0
ohci4: <OHCI (generic) USB controller> [tentative] mem 0xfe8f9000-0xfe8f9fff irq 2 at device 20.5 on pci0
ohci4: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe8f9000
usb6: OHCI version 1.0, legacy support
usb6.ohci4.pci0.pcib0.legacy0.nexus0.root0
usb6: <OHCI (generic) USB controller> [tentative] on ohci4
usb6: USB revision 1.0
uhub6.usb6.ohci4.pci0.pcib0.legacy0.nexus0.root0
uhub6: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb6
uhub6: 2 ports with 2 removable, self powered
uhub6: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb6
usb6: <OHCI (generic) USB controller> [attached!] on ohci4
ohci4: <OHCI (generic) USB controller> [attached!] mem 0xfe8f9000-0xfe8f9fff irq 2 at device 20.5 on pci0
pci0: <PCI bus> [attached!] on pcib0
pcib0: <MPTable Host-PCI bridge> [attached!] pcibus 0 on motherboard
atkbdc-: atkbdc0 exists, using next available unit number
sio-: sio0 exists, using next available unit number
sio-: sio1 exists, using next available unit number
sio-: sio2 exists, using next available unit number
sio-: sio3 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
aps_identify: will specify the port
ex_isa_identify()
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
pmtimer0 [tentative] on isa0
pmtimer0 [attached!] on isa0
adv0 [tentative] failed to probe on isa0
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 [tentative] failed to probe at port 0x134-0x137 on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 [tentative] failed to probe at port 0x134-0x137 on isa0
aic0 [tentative] failed to probe on isa0
atkbdc1: <Keyboard controller (i8042)> [tentative] failed to probe at port 0x60 on isa0
vga0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xffffffff800b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters to be used for mode 24
 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
sc0: <System console> [tentative] at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sc0: <System console> [attached!] at flags 0x100 on isa0
aps0 [tentative] failed to probe at port 0x1600-0x161e on isa0
lm0 [tentative] failed to probe at port 0x290-0x297 on isa0
it0 [tentative] failed to probe at port 0x290-0x297 on isa0
it1 [tentative] failed to probe at port 0xc00-0xc07 on isa0
it2 [tentative] failed to probe at port 0xd00-0xd07 on isa0
it3 [tentative] failed to probe at port 0x228-0x22f on isa0
wbsio0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
wbsio0: <Winbond LPC Super I/O W83627DHG rev 0x25> [tentative] at port 0x2e-0x2f on isa0
wbsio0: hardware monitor iobase is 0xa10
wbsio0: found unused lm0 at 0x290 with state 0, reusing at 0xa10
lm0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
lm0: <Winbond W83627DHG Hardware Monitor> [tentative] at port 0xa10-0xa17 on isa0
lm0: <Winbond W83627DHG Hardware Monitor> [attached!] at port 0xa10-0xa17 on isa0
wbsio0: <Winbond LPC Super I/O W83627DHG rev 0x25> [attached!] at port 0x2e-0x2f on isa0
wbsio1 [tentative] failed to probe at port 0x4e-0x4f on isa0
sio1 [tentative] failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0
sio2: can't drain, serial port might not exist, disabling
sio2 [tentative] failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio3: not probed (disabled)
sio4: not probed (disabled)
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> [tentative] failed to probe at irq 7 on isa0
ed0: not probed (disabled)
lnc0: not probed (disabled)
cs0: not probed (disabled)
sn0: not probed (disabled)
isa_probe_children: probing PnP devices
ums0.uhub0.usb0.ohci0.pci0.pcib0.legacy0.nexus0.root0
ums0: <Microsoft Microsoft Basic Optical Mouse v2.0, class 0/0, rev 1.10/1.99, addr 2> [tentative] on uhub0
ums0: 3 buttons and Z dir.
ums0: <Microsoft Microsoft Basic Optical Mouse v2.0, class 0/0, rev 1.10/1.99, addr 2> [attached!] on uhub0
ukbd0.uhub4.usb4.ohci3.pci0.pcib0.legacy0.nexus0.root0
ukbd0: <vendor 0x0566 product 0x3002, class 0/0, rev 1.10/1.01, addr 2> [tentative] on uhub4
kbd: new array size 4
kbd1 at ukbd0
kbd1: ukbd0, generic (0), config:0x0, flags:0x350000
ukbd0: <vendor 0x0566 product 0x3002, class 0/0, rev 1.10/1.01, addr 2> [attached!] on uhub4
uhid0.uhub4.usb4.ohci3.pci0.pcib0.legacy0.nexus0.root0
uhid0: <vendor 0x0566 product 0x3002, class 0/0, rev 1.10/1.01, addr 2> [tentative] on uhub4
uhid0: <vendor 0x0566 product 0x3002, class 0/0, rev 1.10/1.01, addr 2> [attached!] on uhub4
SMP: enabled INTs: 0 4 9 14 15 17 
faith0: bpf attached
lo0: bpf attached
ppp0: bpf attached
sl0: bpf attached
CAM: Configuring bus: ata0
CAM: Configuring bus: ata1
CAM: Configuring bus: ata2
CAM: Configuring bus: ata3
CAM: Configuring 4 busses
CAM: Finished configuring bus: ata1
CAM: Finished configuring bus: ata2
CAM: Finished configuring bus: ata3
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
(probe0:ata0:0:0:0): error 6
(probe0:ata0:0:0:0): Unretryable Error
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
CAM: Finished configuring bus: ata0
CAM: finished configuring all busses
No policy for cd0 specified, or policy not found
disk scheduler: set policy of cd0 to noop
pass0 at ata0 bus 0 target 0 lun 0
pass0: <Optiarc DVD RW AD-7203S 1.J1> Removable CD-ROM SCSI-0 device 
pass0: 33.000MB/s transfers
sg0 at ata0 bus 0 target 0 lun 0
sg0: <Optiarc DVD RW AD-7203S 1.J1> Removable CD-ROM SCSI-0 device 
sg0: 33.000MB/s transfers
no B_DEVMAGIC (bootdev=0)
ATA PseudoRAID loaded
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
cd0 at ata0 bus 0 target 0 lun 0
cd0: <Optiarc DVD RW AD-7203S 1.J1> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
ad6: type 0xa5, start 63, end = 1250258687, size 1250258625 : OK
Mounting root from hammer:serno/S1QFJ1EQ500327.s1d
tryroot serno/S1QFJ1EQ500327.s1d
HAMMER(ROOT) recovery check seqno=00bd7752
HAMMER(ROOT) recovery range 300000001b678b60-300000001b678b60
HAMMER(ROOT) recovery nexto 300000001b678b60 endseqno=00bd7753
HAMMER(ROOT) mounted clean, no recovery needed
Mounting devfs
start_init: trying /sbin/init


[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]