Re: how to get k10temp on squeeze?

[Siju George <sgeorge.ml@xxxxxxxxx>]

sorry :-(

this was supposed to be sent to the users-debian.
Autocomplete did this

sorry again :-(

--Siju

On Mon, Nov 1, 2010 at 10:39 AM, Siju George <sgeorge.ml@gmail.com> wrote:
> Hi,
>
>  I have a new amd64 Phenome II X6 server which gives this when I run
> sensors-detect
>
> ===========
>
> Driver `k10temp':
>  * Chip `AMD Family 10h thermal sensors' (confidence: 9)
>
> Warning: the required module k10temp is not currently installed
> on your system. If it is built into the kernel then it's OK.
>
> ============
>
> How do I find out if it is built into the kernel?
>
> the sensors now give me this data
>
> $ sensors
> atk0110-acpi-0
> Adapter: ACPI interface
> Vcore Voltage:      +1.42 V  (min =  +0.80 V, max =  +1.60 V)
> +3.3V Voltage:      +3.31 V  (min =  +2.97 V, max =  +3.63 V)
> +5V Voltage:        +5.08 V  (min =  +4.50 V, max =  +5.50 V)
> +12V Voltage:      +11.86 V  (min = +10.20 V, max = +13.80 V)
> CPU Fan Speed:     3341 RPM  (min =  600 RPM)
> Chassis Fan Speed: 1080 RPM  (min =  600 RPM)
> Chassis2 Fan Speed:   0 RPM  (min =  600 RPM)
> Power Fan Speed:      0 RPM  (min =  600 RPM)
> CPU Temperature:    +42.0°C  (high = +60.0°C, crit = +95.0°C)
> MB Temperature:     +36.0°C  (high = +45.0°C, crit = +75.0°C)
>
> Is it possible to get per CPU Data?
>
> thanks
>
> --Siju
>