DragonFly BSD
DragonFly users List (threaded) for 2010-01
[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]

Re: boot0 via serial console


From: Thomas Nikolajsen <thomas.nikolajsen@xxxxxxx>
Date: Sun, 10 Jan 2010 11:30:04 +0100

>installed 2.4.1 inside a VM and would like to run it headless, therefore
>I did "the usual" to get the boot output on COM1, but this is not quite
>working.
>
>I put -Dh in /boot.config and removed the Booteasy manager. Upon boot I
>see (on vidconsole!)

Try using /boot/boot.config;
boot.config needs to go in the root of your boot file system.
If you are using a separate boot file system (i.e. not same as root file system),
it will make a difference.

 -thomas



[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]