DragonFly users List (threaded) for 2009-01
DragonFly BSD
DragonFly users List (threaded) for 2009-01
[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]

Trying to run in Bangho TN120R


From: "Sdävtaker" <sdavtaker@xxxxxxxxx>
Date: Sat, 3 Jan 2009 15:13:24 -0200

hey,
I installed DFBSD2.0.1 and i get this  message all the time:

ACPI Error (psargs-0459): [\\_PR_.CPU0._PPC] Namespace lookup failure,
AE_NOT_FOUND
ACPI Error (psparse-0638): Method parse/execution failed
[\\_SB_.AC__.ADJP] (Node 0xc5aca674), AE_NOT_FOUND
ACPI Error (psparse-0638): Method parse/execution failed
[\\_SB_.AC__._PSR] (Node 0xc5aca624), AE_NOT_FOUND

I copy/paste the full dmesg and pciconf -lv below

I found a couple of different notebooks all with same hardware
configuration different label and skin, if u need some testing or
futher information, just send me a mail and i will do any experiment
you need.
By the way it is working, just getting the anoying msg, i actually got
internet and X already :-)
Thanks
Sdav

Copyright (c) 2003-2008 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly 2.0.1-RELEASE #0: Tue Dec 30 14:08:03 ARST 2008
    root@:/usr/obj/usr/src/sys/GENERIC
TSC clock: 1995315240 Hz, i8254 clock: 1193236 Hz
CPU: Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz (1995.24-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fd  Stepping = 13
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,XTPR,RSVD15>
  Hyperthreading: 2 logical CPUs
real memory  = 3211591680 (3136320K bytes)
avail memory = 3107377152 (3034548K bytes)
Preloaded elf kernel "/kernel" at 0xc079d000.
Preloaded elf module "/modules/acpi.ko" at 0xc079d3f0.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 3.00
ACPI: RSDP @ 0x0xf7d10/0x0024 (v  2 PTLTD )
ACPI: XSDT @ 0x0xbf6d40e8/0x0084 (v  1 PTLTD  	 XSDT   0x06040000  LTP
0x00000000)
ACPI: FACP @ 0x0xbf6dbdb0/0x00F4 (v  3 INTEL  CRESTLNE 0x06040000 ALAN
0x00000001)
ACPI: DSDT @ 0x0xbf6d6008/0x5D34 (v  2 INTEL  CRESTLNE 0x06040000 INTL
0x20050624)
ACPI: FACS @ 0x0xbf6defc0/0x0040
ACPI: HPET @ 0x0xbf6dbea4/0x0038 (v  1 INTEL  CRESTLNE 0x06040000 LOHR
0x0000005A)
ACPI: MCFG @ 0x0xbf6dbedc/0x003C (v  1 INTEL  CRESTLNE 0x06040000 LOHR
0x0000005A)
ACPI: TCPA @ 0x0xbf6dbf18/0x0032 (v  1 Intel   CRESTLN 0x06040000
0x00005A52)
ACPI: TMOR @ 0x0xbf6dbf4a/0x0026 (v  1 PTLTD           0x06040000 PTL
0x00000003)
ACPI: APIC @ 0x0xbf6dbf70/0x0068 (v  1 PTLTD  	 APIC   0x06040000  LTP
0x00000000)
ACPI: BOOT @ 0x0xbf6dbfd8/0x0028 (v  1 PTLTD  $SBFTBL$ 0x06040000  LTP
0x00000001)
ACPI: SSDT @ 0x0xbf6d59b9/0x064F (v  1 SataRe  SataPri 0x00001000 INTL
0x20050624)
ACPI: SSDT @ 0x0xbf6d5327/0x0692 (v  1 SataRe  SataSec 0x00001000 INTL
0x20050624)
ACPI: SSDT @ 0x0xbf6d46f8/0x025F (v  1  PmRef  Cpu0Tst 0x00003000 INTL
0x20050624)
ACPI: SSDT @ 0x0xbf6d4652/0x00A6 (v  1  PmRef  Cpu1Tst 0x00003000 INTL
0x20050624)
ACPI: SSDT @ 0x0xbf6d416c/0x04E6 (v  1  PmRef    CpuPm 0x00003000 INTL
0x20050624)
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
acpi0: <PTLTD 	 XSDT> on motherboard
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device.  You can't run both
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_ec0: <Embedded Controller: GPE 0x18> port 0x66,0x62 on acpi0
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ACPI Error (psargs-0459): [\\_PR_.CPU0._PSS] Namespace lookup failure,
AE_NOT_FOUND
ACPI Error (psparse-0638): Method parse/execution failed
[\\_SB_.AC__.ADJP] (Node 0xc5aca674), AE_NOT_FOUND
ACPI Error (psparse-0638): Method parse/execution failed
[\\_SB_.AC__._PSR] (Node 0xc5aca624), AE_NOT_FOUND
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
legacypci0 on motherboard
pcib0: <Host to PCI bridge> on legacypci0
pci0: <PCI bus> on pcib0
agp0: <Intel GM965 SVGA controller> port 0x1800-0x1807 mem
0xd0000000-0xdfffffff,0xf8000000-0xf80fffff irq 5 at device 2.0 on
pci0
agp0: detected 7676k stolen memory
agp0: aperture size is 256M
pci0: <unknown card> (vendor=0x8086, dev=0x2a03) at 2.1
uhci0: <UHCI (generic) USB controller> port 0x1820-0x183f irq 5 at
device 26.0 on pci0
intr 5 at 40001/40000 hz, livelocked limit engaged!
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x1840-0x185f irq 11 at
device 26.1 on pci0
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
pci0: <USB controller> at 26.7 irq 7
pci0: <unknown card> (vendor=0x8086, dev=0x284b) at 27.0 irq 11
pcib1: <PCI to PCI bridge (vendor=8086 device=283f)> irq 10 at device
28.0 on pci0
pcib1: Disable PCI Express hot-plug interrupts(0x0008)
pci2: <PCI bus> on pcib1
pci2: <unknown card> (vendor=0x8086, dev=0x4222) at 0.0 irq 5
pcib2: <PCI to PCI bridge (vendor=8086 device=2841)> irq 5 at device
28.1 on pci0
pcib2: Disable PCI Express hot-plug interrupts(0x0008)
pci4: <PCI bus> on pcib2
pcib3: <PCI to PCI bridge (vendor=8086 device=2843)> irq 7 at device
28.2 on pci0
pcib3: Disable PCI Express hot-plug interrupts(0x0008)
pci6: <PCI bus> on pcib3
pcib4: <PCI to PCI bridge (vendor=8086 device=2845)> irq 10 at device
28.3 on pci0
pcib4: Disable PCI Express hot-plug interrupts(0x0008)
pci7: <PCI bus> on pcib4
re0: <RealTek 8168/8111B PCIe Gigabit Ethernet> port 0x3000-0x30ff mem
0xf8300000-0xf8300fff irq 10 at device 0.0 on pci7
miibus0: <MII bus> on re0
rgephy0: <8211B/RTL8169S/8110S media interface> on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
intr 5 at 1/20000 hz, livelock removed
re0: MAC address: 00:90:f5:60:4e:65
uhci2: <UHCI (generic) USB controller> port 0x1860-0x187f irq 10 at
device 29.0 on pci0
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x1880-0x189f irq 10 at
device 29.1 on pci0
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0x18a0-0x18bf irq 7 at
device 29.2 on pci0
usb4: <UHCI (generic) USB controller> on uhci4
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
pci0: <USB controller> at 29.7 irq 10
pcib5: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
pci8: <PCI bus> on pcib5
pci8: <unknown card> (vendor=0x1524, dev=0x0730) at 7.0 irq 5
pci8: <unknown card> (vendor=0x1524, dev=0x0750) at 7.1 irq 5
pci8: <unknown card> (vendor=0x1524, dev=0x0751) at 7.3 irq 5
fwohci0: <VIA Fire II (VT6306)> port 0x4000-0x407f mem
0xf8400000-0xf84007ff irq 10 at device 9.0 on pci8
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:00:00:00:11:11:11:c3
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
fwe0: MAC address: 02:00:00:11:11:c3
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
isab0: <PCI to ISA bridge (vendor=8086 device=2815)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH8M SATA300 controller> port
0x18d0-0x18df,0x18e0-0x18ef,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at
device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ad0: 238475MB <WDC WD2500BEVS-22UST0 01.01A01> at ata0-master SATA150
ata1: <ATA channel 1> on atapci0
acd0: DVDR <TSSTcorp CDDVDW TS-L632H/TMC0> at ata1-master UDMA33
pci0: <unknown card> (vendor=0x8086, dev=0x283e) at 31.3 irq 10
orm0: <Option ROMs> at iomem 0xcf000-0xcffff,0xe0000-0xe17ff on isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: can't drain, serial port might not exist, disabling
sio1: can't drain, serial port might not exist, disabling
ppc0: parallel port not found.
Mounting root from ufs:/dev/ad0s2a
cd0 at ata1 bus 0 target 0 lun 0
cd0: <TSSTcorp CDDVDW TS-L632H TMC0> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not
present - tray closed
ACPI Error (psargs-0459): [\\_PR_.CPU0._PSS] Namespace lookup failure,
AE_NOT_FOUND
ACPI Error (psparse-0638): Method parse/execution failed
[\\_SB_.AC__.ADJP] (Node 0xc5aca674), AE_NOT_FOUND
ACPI Error (psparse-0638): Method parse/execution failed
[\\_SB_.AC__._PSR] (Node 0xc5aca624), AE_NOT_FOUND
ACPI Error (psargs-0459): [\\_PR_.CPU0._PSS] Namespace lookup failure,
AE_NOT_FOUND
ACPI Error (psparse-0638): Method parse/execution failed
[\\_SB_.AC__.ADJP] (Node 0xc5aca674), AE_NOT_FOUND
ACPI Error (psparse-0638): Method parse/execution failed
[\\_SB_.AC__._PSR] (Node 0xc5aca624), AE_NOT_FOUND
ACPI Error (psargs-0459): [\\_PR_.CPU0._PPC] Namespace lookup failure,
AE_NOT_FOUND
ACPI Error (psparse-0638): Method parse/execution failed
[\\_SB_.AC__.ADJP] (Node 0xc5aca674), AE_NOT_FOUND
ACPI Error (psparse-0638): Method parse/execution failed
[\\_SB_.AC__._PSR] (Node 0xc5aca624), AE_NOT_FOUND







hostb0@pci0:0:0:	class=0x060000 card=0x01221558 chip=0x2a008086
rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = 'Mobile PM965/GM965/GL960 Express Processor to DRAM Controller'
    class    = bridge
    subclass = HOST-PCI
agp0@pci0:2:0:	class=0x030000 card=0x01221558 chip=0x2a028086 rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = 'Mobile 965 Express Integrated Graphics Controller'
    class    = display
    subclass = VGA
none0@pci0:2:1:	class=0x038000 card=0x01221558 chip=0x2a038086 rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = 'Mobile 965 Express Integrated Graphics Controller'
    class    = display
uhci0@pci0:26:0:	class=0x0c0300 card=0x01221558 chip=0x28348086
rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801H (ICH8 Family) USB UHCI #4'
    class    = serial bus
    subclass = USB
uhci1@pci0:26:1:	class=0x0c0300 card=0x01221558 chip=0x28358086
rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801H (ICH8 Family) USB UHCI #5'
    class    = serial bus
    subclass = USB
none1@pci0:26:7:	class=0x0c0320 card=0x01221558 chip=0x283a8086
rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '81EC1043 (?) ICH8 Enhanced USB2 Enhanced Host Controller'
    class    = serial bus
    subclass = USB
none2@pci0:27:0:	class=0x040300 card=0x01221558 chip=0x284b8086
rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801H Intel audio controller embedded with the 82801H
chipset ( ICH8 chipset )'
    class    = multimedia
pcib1@pci0:28:0:	class=0x060400 card=0x00000040 chip=0x283f8086
rev=0x03 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801H (ICH8 Family) PCIe Port 1'
    class    = bridge
    subclass = PCI-PCI
pcib2@pci0:28:1:	class=0x060400 card=0x00000040 chip=0x28418086
rev=0x03 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801H (ICH8 Family) PCIe Port 2'
    class    = bridge
    subclass = PCI-PCI
pcib3@pci0:28:2:	class=0x060400 card=0x00000040 chip=0x28438086
rev=0x03 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801H (ICH8 Family) PCIe Port 3'
    class    = bridge
    subclass = PCI-PCI
pcib4@pci0:28:3:	class=0x060400 card=0x00000040 chip=0x28458086
rev=0x03 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801H (ICH8 Family) PCIe Port 4'
    class    = bridge
    subclass = PCI-PCI
uhci2@pci0:29:0:	class=0x0c0300 card=0x01221558 chip=0x28308086
rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801H (ICH8 Family) USB UHCI #1'
    class    = serial bus
    subclass = USB
uhci3@pci0:29:1:	class=0x0c0300 card=0x01221558 chip=0x28318086
rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801H (ICH8 Family) USB UHCI #2'
    class    = serial bus
    subclass = USB
uhci4@pci0:29:2:	class=0x0c0300 card=0x01221558 chip=0x28328086
rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801H (ICH8 Family) USB UHCI #3'
    class    = serial bus
    subclass = USB
none3@pci0:29:7:	class=0x0c0320 card=0x01221558 chip=0x28368086
rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801H (ICH8 Family) USB2 EHCI #1'
    class    = serial bus
    subclass = USB
pcib5@pci0:30:0:	class=0x060401 card=0x00000050 chip=0x24488086
rev=0xf3 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801 Family (ICH2/3/4/5/6/7/8/9-M) Hub Interface to PCI Bridge'
    class    = bridge
    subclass = PCI-PCI
isab0@pci0:31:0:	class=0x060100 card=0x01221558 chip=0x28158086
rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801HEM (ICH8M-E) LPC Interface Controller'
    class    = bridge
    subclass = PCI-ISA
atapci0@pci0:31:2:	class=0x010180 card=0x01221558 chip=0x28288086
rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801 (ICH8M) 3 port SATA Controller'
    class    = mass storage
    subclass = ATA
none4@pci0:31:3:	class=0x0c0500 card=0x01221558 chip=0x283e8086
rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801H (ICH8 Family) SMBus Controller'
    class    = serial bus
    subclass = SMBus
none5@pci2:0:0:	class=0x028000 card=0x10018086 chip=0x42228086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '10418086 Intel 3945ABG Wireless LAN controller'
    class    = network
re0@pci7:0:0:	class=0x020000 card=0x01221558 chip=0x816810ec rev=0x01 hdr=0x00
    vendor   = 'Realtek Semiconductor'
    device   = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC'
    class    = network
    subclass = ethernet
none6@pci8:7:0:	class=0x050100 card=0x01221558 chip=0x07301524 rev=0x00 hdr=0x00
    vendor   = 'ENE Technology Inc'
    device   = 'PCI Memory Stick Card Reader Controller'
    class    = memory
    subclass = flash
none7@pci8:7:1:	class=0x080501 card=0x01221558 chip=0x07501524 rev=0x00 hdr=0x00
    vendor   = 'ENE Technology Inc'
    device   = 'PCI SmartMedia / xD Card Reader Controller'
    class    = base peripheral
none8@pci8:7:3:	class=0x050100 card=0x01221558 chip=0x07511524 rev=0x00 hdr=0x00
    vendor   = 'ENE Technology Inc'
    device   = 'PCI Secure Digital / MMC Card Reader Controller'
    class    = memory
    subclass = flash
fwohci0@pci8:9:0:	class=0x0c0010 card=0x01221558 chip=0x30441106
rev=0xc0 hdr=0x00
    vendor   = 'VIA Technologies Inc'
    device   = 'VT6306 VIA Fire II IEEE-1394 OHCI Link Layer Controller'
    class    = serial bus
    subclass = FireWire



[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]