DragonFly users List (threaded) for 2007-08
DragonFly BSD
DragonFly users List (threaded) for 2007-08
[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]

Re: RealTek 8168B/8111B, new revision (ISO-request)


From: "Dennis den Brok" <d.den.brok@xxxxxxxxxxx>
Date: Sun, 12 Aug 2007 19:54:01 +0200

Am 12.08.2007, 19:01 Uhr, schrieb Matthew Dillon
<dillon@apollo.backplane.com>:


:disk 1: uhub0: device problem (TIMEOUT), disabling port 2 : :disk 2: :# fdisk -I /dev/da0 :******* Working on device /dev/da0 ******* :fdisk: /boot/mbr: length must be a multiple of sector size : :kernel says: : :dscheck(da0): b_bcount 512 is not on a sector boundary (ssize 2048) :dscheck(da0): b_bcount 1024 is not on a sector boundary (ssize 2048)

You are trying to fdisk a CD ? You can't fdisk a CD.

					-Matt
					Matthew Dillon
					<dillon@backplane.com>

:when invoking fdisk.
:
:Disabling acpi causes DF not to be able to access the USB-CD-drive
:anymore.
:
:--
:Dennis den Brok

Thanks for the hint, but actually I was trying to fdisk a USB stick. Kernel says the following when I plug it in:

umass1: ChipsBnk Flash Disk, rev 2.00/1.00, addr 3
da0 at umass-sim1 bus 1 target 0 lun 0
da0: <ChipsBnk Flash Disk 4.00> Removable Direct Access SCSI-2 device
da0: 1.000MB/s transfers
da0: 1010MB (517375 2048 byte sectors: 64H 32S/T 252C)
(da0:umass-sim1:1:0:0): SYNCHRONIZE CACHE. CDB: 35 0 0 0 0 0 0 0 0 0
(da0:umass-sim1:1:0:0): NOT READY asc:3a,0
(da0:umass-sim1:1:0:0): Medium not present

In case it helps, I'll attach complete dmesg output.

--
Dennis den Brok
Copyright (c) 2003, 2004, 2005, 2006, 2007 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly 1.11.0-DEVELOPMENT #0: Sat Aug 11 00:50:46 CEST 2007
    root@chlamydia.fs.ei.tum.de:/usr/obj/usr/src/sys/GENERIC
TSC clock: 1066782312 Hz, i8254 clock: 1193269 Hz
CPU: Intel(R) Celeron(R) M CPU        423  @ 1.06GHz (1066.71-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6e8  Stepping = 8
  Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
  Features2=0xc109<SSE3,MON,TM2,XTPR,RSVD15>
real memory  = 1602027520 (1564480K bytes)
avail memory = 1544884224 (1508676K bytes)
Preloaded elf kernel "/kernel" at 0xc07bc000.
Preloaded elf module "/modules/acpi.ko" at 0xc07bc21c.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 3.00
Using $PIR table, 16 entries at 0xc00f5240
ACPI: RSDP @ 0x0xf77c0/0x0024 (v  2 ACPIAM)
ACPI: XSDT @ 0x0x5f7d0100/0x0044 (v  1 A M I  OEMXSDT  0x11000601 MSFT 0x00000097)
ACPI: FACP @ 0x0x5f7d0290/0x00F4 (v  3 A M I  OEMFACP  0x11000601 MSFT 0x00000097)
ACPI Warning (tbfadt-0505): Optional field "Pm2ControlBlock" has zero address or length:        0     820/0 [20061109]
ACPI: DSDT @ 0x0x5f7d0430/0x4B69 (v  1 986LCD 986LCD10 0x00000010 INTL 0x02002026)
ACPI: FACS @ 0x0x5f7de000/0x0040
ACPI: APIC @ 0x0x5f7d0390/0x005C (v  1 A M I  OEMAPIC  0x11000601 MSFT 0x00000097)
ACPI: MCFG @ 0x0x5f7d03f0/0x003C (v  1 A M I  OEMMCFG  0x11000601 MSFT 0x00000097)
ACPI: OEMB @ 0x0x5f7de040/0x0060 (v  1 A M I  AMI_OEM  0x11000601 MSFT 0x00000097)
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
acpi0: <A M I OEMXSDT> on motherboard
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device.  You can't run both
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
legacypci0 on motherboard
pcib0: <Host to PCI bridge> on legacypci0
pci0: <PCI bus> on pcib0
pci0: <Intel model 27a2 VGA-compatible display device> at 2.0
pci0: <unknown card> (vendor=0x8086, dev=0x27a6) at 2.1
pci0: <unknown card> (vendor=0x8086, dev=0x27d8) at 27.0 irq 10
pcib1: <PCI to PCI bridge (vendor=8086 device=27d0)> irq 10 at device 28.0 on pci0
pci1: <PCI bus> on pcib1
re0: <RealTek 8168B/8111B PCIe Gigabit Ethernet> port 0xd800-0xd8ff mem 0xff7ff000-0xff7fffff irq 10 at device 0.0 on pci1
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: MAC address: 00:e0:f4:16:cc:e0
uhci0: <UHCI (generic) USB controller> port 0xe880-0xe89f irq 11 at device 29.0 on pci0
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: 2 ports with 2 removable, self powered
umass0: Freecom Technologies FCD-Classic, rev 2.00/4.07, addr 2
uhci1: <UHCI (generic) USB controller> port 0xe800-0xe81f irq 15 at device 29.1 on pci0
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: 2 ports with 2 removable, self powered
ugen0: Canon CanoScan, rev 2.00/3.06, addr 2
uhci2: <UHCI (generic) USB controller> port 0xe480-0xe49f irq 5 at device 29.2 on pci0
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: 2 ports with 2 removable, self powered
uhid0: vendor 0x0ccd USB Audio, rev 1.10/1.00, addr 2, iclass 3/0
uhci3: <UHCI (generic) USB controller> port 0xe400-0xe41f irq 10 at device 29.3 on pci0
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: 2 ports with 2 removable, self powered
pci0: <USB controller> at 29.7 irq 11
pcib2: <Intel 82801BA/CA/DB/EB/FB (ICH2/3/4/5/6) Hub to PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
isab0: <PCI to ISA bridge (vendor=8086 device=27b8)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ad0: DMA limited to UDMA33, controller found non-ATA66 cable
ad0: FAILURE - SET_MULTI status=51<READY,DSC,ERROR> error=4<ABORTED>
ad0: 3823MB <LEXAR ATA FLASH CARD 20070228> at ata0-master UDMA33
ata1: <ATA channel 1> on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x27da) at 31.3 irq 15
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: can't drain, serial port might not exist, disabling
sio1: can't drain, serial port might not exist, disabling
ppc0: parallel port not found.
Mounting root from cd9660:cd0c
cd0 at umass-sim0 bus 0 target 0 lun 0
cd0: <FREECOM DVD+/-RW8J9 VSR1> Removable CD-ROM SCSI-0 device 
cd0: 1.000MB/s transfers
cd0: cd present [135296 x 2048 byte records]
umass1: ChipsBnk Flash Disk, rev 2.00/1.00, addr 3
da0 at umass-sim1 bus 1 target 0 lun 0
da0: <ChipsBnk Flash Disk 4.00> Removable Direct Access SCSI-2 device 
da0: 1.000MB/s transfers
da0: 1010MB (517375 2048 byte sectors: 64H 32S/T 252C)
(da0:umass-sim1:1:0:0): SYNCHRONIZE CACHE. CDB: 35 0 0 0 0 0 0 0 0 0 
(da0:umass-sim1:1:0:0): NOT READY asc:3a,0
(da0:umass-sim1:1:0:0): Medium not present


[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]