DragonFly users List (threaded) for 2006-10
[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index][Thread Index]

Re: e2fsck segmentation fault

From:	Petr Janda <elekktretterr@xxxxxxxxxxxxxx>
Date:	Tue, 17 Oct 2006 14:17:06 +1000

Copyright (c) 2003, 2004, 2005, 2006 The DragonFly Project. Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. DragonFly 1.7.0-DEVELOPMENT #3: Sun Oct 1 12:18:29 EST 2006 petr@xxxxxxxxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/EVELIN TSC clock: 1799943458 Hz, i8254 clock: 1193102 Hz CPU: AMD Athlon(tm) 64 Processor 3000+ (1800.08-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x10ff0 Stepping = 0 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> AMD Features=0xe0500000<<b20>,AMIE,<b29>,DSP,3DNow!> real memory = 1072562176 (1047424K bytes) avail memory = 1031827456 (1007644K bytes) CCMSINIT Preloaded elf kernel "/kernel" at 0xc058d000. Preloaded elf module "/modules/snd_emu10k1.ko" at 0xc058d288. Preloaded elf module "/modules/snd_pcm.ko" at 0xc058d334. Preloaded elf module "/modules/acpi.ko" at 0xc058d3dc. sched_ithd: stray interrupt 7 Pentium Pro MTRR support enabled md0: Malloc disk pcibios: BIOS version 3.00 Using $PIR table, 18 entries at 0xc00fde40 sched_ithd: stray interrupt 7 npx0: <math processor> on motherboard npx0: INT 16 interface Using XMM optimized bcopy/copyin/copyout acpi0: <K8T890 AWRDACPI> on motherboard acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi0: Power Button (fixed) Warning: ACPI is disabling APM's device. You can't run both acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_button0: <Power Button> on acpi0 compare 0 compare 0 compare 0 compare 0 compare 0 compare 0 compare 0 compare 0 compare 0 legacypci0 on motherboard pcib0: <Host to PCI bridge> on legacypci0 pci0: <PCI bus> on pcib0 agp0: <VIA Generic host to PCI bridge> mem 0xc0000000-0xc7ffffff at device 0.0 on pci0 pci0: <unknown card> (vendor=0x1106, dev=0x5238) at 0.5 pcib1: <PCI to PCI bridge (vendor=1106 device=b188)> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pcib2: <PCI to PCI bridge (vendor=1106 device=a238)> irq 11 at device 2.0 on pci0 pci2: <PCI bus> on pcib2 pci2: <NVidia model 0140 graphics accelerator> at 0.0 irq 11 pcib3: <PCI to PCI bridge (vendor=1106 device=c238)> irq 11 at device 3.0 on pci0 pci3: <PCI bus> on pcib3 pcib4: <PCI to PCI bridge (vendor=1106 device=d238)> at device 3.1 on pci0 pci4: <PCI bus> on pcib4 pcib5: <PCI to PCI bridge (vendor=1106 device=e238)> irq 11 at device 3.2 on pci0 pci5: <PCI bus> on pcib5 pcib6: <PCI to PCI bridge (vendor=1106 device=f238)> irq 11 at device 3.3 on pci0 pci6: <PCI bus> on pcib6 fwohci0: <Texas Instruments TSB43AB22/A> mem 0xd9120000-0xd9123fff,0xd9126000-0xd91267ff at device 8.0 on pci0 fwohci0: Invalid irq 255 fwohci0: Please switch PNP-OS to 'No' in BIOS pci_cfgintr: 0:8 INTA routed to irq 3 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 00:11:d8:00:00:14:c1:a2 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 fwe0: MAC address: 02:11:d8:14:c1:a2 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) pcm0: <Creative EMU10K1> port 0xb000-0xb01f irq 11 at device 11.0 on pci0 pcm0: <Cirrus Logic CS4297A AC97 Codec> acx0: <Texas Instruments TNETW1130 Wireless Adapter> mem 0xd9100000-0xd911ffff,0xd9124000-0xd9125fff irq 3 at device 12.0 on pci0 acx0: radio type 16 acx0: EEPROM version 5 acx0: MAC address: 00:11:95:5f:2b:ab ieee80211_load_module: load the wlan_ratectl_amrr module by hand for now. ieee80211_ratectl_change: can't load requested rate control modulefxp0: <Intel 82559 Pro/100 Ethernet> port 0xb800-0xb83f mem 0xd9000000-0xd90fffff,0xd9127000-0xd9127fff irq 5 at device 13.0 on pci0 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: MAC address: 00:02:b3:0b:9e:0f atapci0: <VIA 8237 SATA 150 controller> port 0xd000-0xd0ff,0xcc00-0xcc0f,0xc800-0xc803,0xc400-0xc407,0xc000-0xc003,0xbc00-0xbc07 irq 11 at device 15.0 on pci0 ata2: at 0xbc00 on atapci0 ata3: at 0xc400 on atapci0 atapci1: <VIA 8237 ATA133 controller> port 0xd400-0xd40f at device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci1 ata1: at 0x170 irq 15 on atapci1 uhci0: <VIA 83C572 USB controller> port 0xd800-0xd81f at device 16.0 on pci0 pci_cfgintr: 0:16 INTA routed to irq 3 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub0: port error, restarting port 1 uhub0: port error, giving up port 1 uhci1: <VIA 83C572 USB controller> port 0xdc00-0xdc1f at device 16.1 on pci0 pci_cfgintr: 0:16 INTA routed to irq 3 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered intr 3 at 50001 > 50000 hz, livelocked limit engaged! ulpt0: Hewlett-Packard DeskJet 930C, rev 1.00/1.00, addr 2, iclass 7/1 ulpt0: using bi-directional mode ukbd0: Logitech USB Receiver, rev 1.10/30.07, addr 3, iclass 3/1 kbd1 at ukbd0 ums0: Logitech USB Receiver, rev 1.10/30.07, addr 3, iclass 3/1 ums0: 16 buttons and Z dir. uhci2: <VIA 83C572 USB controller> port 0xe000-0xe01f at device 16.2 on pci0 pci_cfgintr: 0:16 INTB routed to irq 11 usb2: <VIA 83C572 USB controller> on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhub2: port error, restarting port 1 uhub2: port error, giving up port 1 uhci3: <VIA 83C572 USB controller> port 0xe400-0xe41f at device 16.3 on pci0 pci_cfgintr: 0:16 INTB routed to irq 11 usb3: <VIA 83C572 USB controller> on uhci3 usb3: USB revision 1.0 uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered pci0: <USB controller> at 16.4 isab0: <PCI to ISA bridge (vendor=1106 device=3227)> at device 17.0 on pci0 isa0: <ISA bus> on isab0 orm0: <Option ROM> at iomem 0xd0000-0xd0fff on isa0 pmtimer0 on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 device_probe_and_attach: atkbd0 attach returned 6 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: can't drain, serial port might not exist, disabling ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ad0: 38166MB <WDC WD400JB-00ENA0> [77545/16/63] at ata0-master UDMA100 ad4: DMA limited to UDMA33, non-ATA66 cable or device ad4: 76319MB <WDC WD800JD-22JNA0> [155061/16/63] at ata2-master UDMA33 ad6: DMA limited to UDMA33, non-ATA66 cable or device ad6: 76293MB <WDC WD800JD-75JNA0> [155009/16/63] at ata3-master UDMA33 acd0: DVD-R <PIONEER DVD-RW DVR-109> at ata1-master UDMA66 intr 3 at 7376 < 20000 hz, livelock removed Mounting root from ufs:/dev/ad4s1a cd0 at ata1 bus 0 target 0 lun 0 cd0: <PIONEER DVD-RW DVR-109 1.57> Removable CD-ROM SCSI-0 device cd0: 66.000MB/s transfers cd0: cd present [2240944 x 2048 byte records] linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=978) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) linux: syscall madvise is obsoleted or not implemented (pid=1002) pid 1580 (e2fsck), uid 0: exited on signal 11

Petr

Vladimir Mitiouchev wrote:

On 10/17/06, Petr Janda <elekktretterr@xxxxxxxxxxxxxx> wrote:
I didnt create it. its a Xen *image* of ubuntu. Im not trying to run
Xen, im just trying to resize the image. I have to say it again, this is
a filesystem in an .img file.
I undestand. But please, send Your dmesg.

Follow-Ups:
- Re: e2fsck segmentation fault
  - From: Vladimir Mitiouchev

References:
- e2fsck segmentation fault
  - From: Petr Janda
- Re: e2fsck segmentation fault
  - From: Vladimir Mitiouchev

[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index][Thread Index]