DragonFly kernel List (threaded) for 2007-11
DragonFly BSD
DragonFly kernel List (threaded) for 2007-11
[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]

Re: Kernel panic during boot in usb_add_task


From: Michael Neumann <mneumann@xxxxxxxx>
Date: Wed, 21 Nov 2007 17:46:04 +0100

Michael Neumann schrieb:
Bill Hacker schrieb:
Michael Neumann wrote:
For starters, what does NetBSD report as the hardware and can you capture *any* scan, dmesg, or other report from FreeBSD 7-BETA3 or DFLY?

Dmesg of NetBSD-4.0_RC4 is appended.

Forgot attachement.


Regards,

Michael
NetBSD 4.0_RC4 (GENERIC.MP) #0: Thu Nov  8 00:20:39 PST 2007
	builds@wb28:/home/builds/ab/netbsd-4-0-RC4/amd64/200711080452Z-obj/home/builds/ab/netbsd-4-0-RC4/src/sys/arch/amd64/compile/GENERIC.MP
total memory = 1015 MB
avail memory = 965 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz, 2194.68 MHz
cpu0: features: bffbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features: bffbfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,B20,DS,ACPI,MMX>
cpu0: features: bffbfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2: e3bd<SSE3,MONITOR,DS-CPL,VMX,EST,TM2,xTPR>
cpu0: features3: bffbfbff<SYSCALL/SYSRET,XD,EM64T>
cpu0: L2 cache 4 MB 64B/line 16-way
cpu0: Enhanced SpeedStep (1484 mV) 2400 MHz
cpu0: unknown Enhanced SpeedStep CPU.
cpu0: using only highest and lowest power states.
cpu0: Enhanced SpeedStep frequencies available (MHz): 2400 1200
cpu0: calibrating local timer
cpu0: apic clock running at 199 MHz
cpu0: 64 page colors
cpu1 at mainbus0: apid 1 (application processor)
cpu1: starting
cpu1: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz, 2194.46 MHz
cpu1: features: bffbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features: bffbfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,B20,DS,ACPI,MMX>
cpu1: features: bffbfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu1: features2: e3bd<SSE3,MONITOR,DS-CPL,VMX,EST,TM2,xTPR>
cpu1: features3: bffbfbff<SYSCALL/SYSRET,XD,EM64T>
cpu1: L2 cache 4 MB 64B/line 16-way
ioapic0 at mainbus0 apid 1 (I/O APIC)
ioapic0: pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0
ioapic0: remapped to apic 1
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <HPQOEM,SLIC-MPC,00000001>, AslId <HP  ,00000001>
ACPI Error (evgpeblk-0394): Unknown GPE method type: C1B9 (name not of form _Lxx or _Exx) [20060217]
ACPI Error (evgpeblk-0394): Unknown GPE method type: C1BA (name not of form _Lxx or _Exx) [20060217]
ACPI Error (evgpeblk-0394): Unknown GPE method type: C1BC (name not of form _Lxx or _Exx) [20060217]
ACPI Error (evgpeblk-0394): Unknown GPE method type: C1BD (name not of form _Lxx or _Exx) [20060217]
ACPI Error (evgpeblk-0394): Unknown GPE method type: C1BB (name not of form _Lxx or _Exx) [20060217]
ACPI Error (evgpeblk-0394): Unknown GPE method type: C2AF (name not of form _Lxx or _Exx) [20060217]
ACPI Error (evgpeblk-0394): Unknown GPE method type: C2B0 (name not of form _Lxx or _Exx) [20060217]
ACPI Error (evgpeblk-0394): Unknown GPE method type: C2B1 (name not of form _Lxx or _Exx) [20060217]
ACPI Error (evgpeblk-0394): Unknown GPE method type: C2B2 (name not of form _Lxx or _Exx) [20060217]
ACPI Error (evgpeblk-0394): Unknown GPE method type: C154 (name not of form _Lxx or _Exx) [20060217]
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
mpacpi: could not get bus number, assuming bus 0
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
PNP0A08 [PCI Express/PCI-X Mode-2 Host Bridge] at acpi0 not configured
acpiec0 at acpi0 (PNP0C09): ACPI Embedded Controller
acpiec0: io 0x62,0x66
PNP0A06 [Generic Container Device] at acpi0 not configured
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
lpt2 at acpi0 (PNP0401)
lpt2: io 0x378-0x37f,0x778-0x77a irq 7 drq 1
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
IFX0102 at acpi0 not configured
PNP0C04 [Math Coprocessor] at acpi0 not configured
attimer1 at acpi0 (PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
PNP0200 [AT DMA Controller] at acpi0 not configured
pcppi1 at acpi0 (PNP0800)
pcppi1: io 0x61
pcppi1: children must have an explicit unit
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
PNP0103 [HPET Timer] at acpi0 not configured
pckbc1 at acpi0 (PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (SYN0134): aux port
pckbc2: irq 12
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
HPQ0004 at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
HPQ0006 at acpi0 not configured
acpibat0 at acpi0 (PNP0C0A-1): ACPI Battery (Control Method)
acpibat1 at acpi0 (PNP0C0A-2): ACPI Battery (Control Method)
acpiacad0 at acpi0 (ACPI0003): ACPI AC Adapter
acpibut0 at acpi0 (PNP0C0E): ACPI Sleep Button
acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
PNP0C14 at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
PNP0C0B [ACPI Fan] at acpi0 not configured
PNP0C0B [ACPI Fan] at acpi0 not configured
PNP0C0B [ACPI Fan] at acpi0 not configured
PNP0C0B [ACPI Fan] at acpi0 not configured
PNP0C0B [ACPI Fan] at acpi0 not configured
acpitz0 at acpi0: ACPI Thermal Zone
acpitz0: unable to get polling interval; using default of 30.0s
acpitz0: active cooling level 0: 80.0C
acpitz0: active cooling level 1: 65.0C
acpitz0: active cooling level 2: 55.0C
acpitz0: active cooling level 3: 45.0C
acpitz0: active cooling level 4: 35.0C
acpitz0:
acpitz1 at acpi0: ACPI Thermal Zone
acpitz1: unable to get polling interval; using default of 30.0s
acpitz1: critical 108.0C passive 51.0C
acpitz2 at acpi0: ACPI Thermal Zone
acpitz2: unable to get polling interval; using default of 30.0s
acpitz2: critical 105.0C passive 43.0C
acpitz3 at acpi0: ACPI Thermal Zone
acpitz3: unable to get polling interval; using default of 30.0s
acpitz3: critical 108.0C passive 24.5C
acpitz4 at acpi0: ACPI Thermal Zone
acpitz4: unable to get polling interval; using default of 30.0s
acpitz4: critical 110.0C
pcppi1: attached to attimer1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 6.2
pms0: Palm detect, Multi-finger
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel product 0x2a00 (rev. 0x0c)
vga0 at pci0 dev 2 function 0: Intel product 0x2a02 (rev. 0x0c)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
Intel product 0x2a03 (miscellaneous display, revision 0x0c) at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0: Intel 82801H USB UHCI Controller (rev. 0x03)
uhci0: interrupting at ioapic0 pin 16 (irq 10)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 26 function 1: Intel 82801H USB UHCI Controller (rev. 0x03)
uhci1: interrupting at ioapic0 pin 17 (irq 10)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 26 function 7: Intel 82801H USB EHCI Controller (rev. 0x03)
ehci0: interrupting at ioapic0 pin 18 (irq 11)
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 16 (irq 10)
azalia0: host: Intel 82801H High Definition Audio Controller (rev. 3)
azalia0: host: High Definition Audio rev. 1.0
ppb0 at pci0 dev 28 function 0: Intel 82801H PCI Express Port #1 (rev. 0x03)
pci1 at ppb0 bus 8
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: Intel 82801H PCI Express Port #2 (rev. 0x03)
pci2 at ppb1 bus 16
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
wpi0 at pci2 dev 0 function 0: Intel PRO/Wireless LAN 3945ABG Mini-PCI Adapter (rev. 0x02)
wpi0: interrupting at ioapic0 pin 17 (irq 10)
, MoW2, address 00:1c:bf:0e:14:1c
wpi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wpi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wpi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ppb2 at pci0 dev 28 function 2: Intel 82801H PCI Express Port #3 (rev. 0x03)
pci3 at ppb2 bus 24
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci3 dev 0 function 0: Broadcom BCM5787M Gigabit Ethernet
bge0: interrupting at ioapic0 pin 18 (irq 11)
bge0: ASIC BCM5754/5787 A2 (0xb002), Ethernet address 00:1a:4b:73:f3:9a
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5754/5787 1000BASE-T media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb3 at pci0 dev 28 function 4: Intel 82801H PCI Express Port #5 (rev. 0x03)
pci4 at ppb3 bus 40
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
uhci2 at pci0 dev 29 function 0: Intel 82801H USB UHCI Controller (rev. 0x03)
uhci2: interrupting at ioapic0 pin 20 (irq 10)
usb3 at uhci2: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 1: Intel 82801H USB UHCI Controller (rev. 0x03)
uhci3: interrupting at ioapic0 pin 21 (irq 10)
usb4 at uhci3: USB revision 1.0
uhub4 at usb4
uhub4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhci4 at pci0 dev 29 function 2: Intel 82801H USB UHCI Controller (rev. 0x03)
uhci4: interrupting at ioapic0 pin 18 (irq 11)
usb5 at uhci4: USB revision 1.0
uhub5 at usb5
uhub5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
ehci1 at pci0 dev 29 function 7: Intel 82801H USB EHCI Controller (rev. 0x03)
ehci1: interrupting at ioapic0 pin 20 (irq 10)
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci2 uhci3 uhci4
usb6 at ehci1: USB revision 2.0
uhub6 at usb6
uhub6: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub6: 6 ports with 6 removable, self powered
ppb4 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xf3)
pci5 at ppb4 bus 2
pci5: i/o space, memory space enabled
cbb0 at pci5 dev 4 function 0: Ricoh 5C476 PCI-CardBus bridge (rev. 0xb6)
fwohci0 at pci5 dev 4 function 1: Ricoh product 0x0832 (rev. 0x02)
fwohci0: interrupting at ioapic0 pin 17 (irq 10)
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:02:3f:99:29:79:4f:0e
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
cbb0: interrupting at ioapic0 pin 16 (irq 5)
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0
pcib0: Intel product 0x2815 (rev. 0x03)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801HBM IDE Controller (ICH8M) (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
ahcisata0 at pci0 dev 31 function 2: Intel 82801HBM SATA Controller
ahcisata0: interrupting at ioapic0 pin 17 (irq 10)
ahcisata0: AHCI revision 1.1, 3 ports, 32 command slots, features 0xef20e080
atabus1 at ahcisata0 channel 0
isa0 at pcib0
ioapic0: enabling
WARNING: Callback scheduled before sysmon task queue thread present.
WARNING: Callback scheduled before sysmon task queue thread present.
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
ieee1394if0: bus manager 0 (me)
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia0: codec[0]: Analog Devices AD1981HD (rev. 2.0)
azalia0: codec[0]: High Definition Audio rev. 1.0
azalia0: playback: max channels=2, encodings=1<PCM>
azalia0: playback: PCM formats=e007f<24bit,20bit,16bit,48kHz,44.1kHz,32kHz,22.05kHz,16kHz,11.025kHz,8kHz>
azalia0: recording: max channels=2, encodings=1<PCM>
azalia0: recording: PCM formats=6007f<20bit,16bit,48kHz,44.1kHz,32kHz,22.05kHz,16kHz,11.025kHz,8kHz>
azalia0: codec[1]: 0x11c1/0x1040 (rev. 2.0)
azalia0: codec[1]: High Definition Audio rev. 1.0
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1] has no audio function groups
audio0 at azalia0: full duplex, independent
Kernelized RAIDframe activated
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <TSSTcorpCD/DVDW TS-L632D, , HH18> cdrom removable
ahcisata0 port 0: device present, speed: 1.5Gb/s
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
cd0(piixide0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
wd0 at atabus1 drive 0: <Hitachi HTS541612J9SA00>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
cpu1: CPU 1 running
ugen0 at uhub3 port 2
ugen0: AuthenTec Fingerprint Sensor, rev 1.10/6.23, addr 2
ubt0 at uhub0 port 1 configuration 1 interface 0
ubt0: Broadcom Corp HP Integrated Module, rev 2.00/1.00, addr 2
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
bthub0 at ubt0 local-bdaddr 00:1e:37:02:f8:87
bthidev0 at bthub0 remote-bdaddr 00:02:76:01:6b:0d link-mode encrypt
btms0 at bthidev0 reportid 2: 2 buttons.
wsmouse1 at btms0 mux 0
bthidev0: reportid 3 not configured
bthidev0: reportid 4 not configured
bthidev0: reportid 5 not configured
bthidev0: disconnected
acpiacad0: AC adapter online.
acpibat0: battery info: Hewlett-Packard, LIon, Primary, 35305 2007/10/16
acpiacad0: AC adapter online.
pcmcia0: card appears to have bogus CIS
ubt0: at uhub0 port 1 (addr 2) disconnected
wsmouse1 detached
btms0 detached
bthidev0 detached
bthub0 detached
ubt0 detached
ubt0 at uhub0 port 1 configuration 1 interface 0
ubt0: Broadcom Corp HP Integrated Module, rev 2.00/1.00, addr 2


[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]