DragonFly kernel List (threaded) for 2007-06
Re: Decision time.... should NATA become the default for this release?
On 6/2/07, Sepherosa Ziehau <firstname.lastname@example.org> wrote:
On 6/2/07, Matthew Dillon <email@example.com> wrote:
> I still want all the dmesg output for both NATA and ATA boots (well,
> at least the atapci, ata, and ad lines). I am interested not only in
> the controller it detects, but also the DMA mode it detects and whether
> it detects an old style cable or not.
> Go into your BIOS SETUP and force the DMA mode to UDMA33 (UDMA mode 2),
> and see if you still get core dumps and such when you boot with NATA.
> (but I need to know the dmesg output without the BIOS DMA setting forced
> down, so extract the dmesg lines first).
atapci0: <Intel ICH3 UDMA100 controller> port
0xbfa0-0xbfaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on
ata0: <ATA channel 0> on atapci0
ad0: 76319MB <Hitachi HTS541280H9AT00 HP3OA23C> at ata0-master UDMA100
ata1: <ATA channel 1> on atapci0
Looks like NATA's atapci0 uses different IO ports from the old ATA's
If I commented out PCI_MAP_FIXUP, NATA's atacpi0 will use same IO port
as old ATA. But I got "init: fatal signal: Segmentation fault"
Live Free or Die