DragonFly kernel List (threaded) for 2004-11
[
Date Prev][
Date Next]
[
Thread Prev][
Thread Next]
[
Date Index][
Thread Index]
Fatal trap 19: non-maskable interrupt trap while in kernel mode
Hi!
I've tried to install 1.0A-RELEASE on my AMD64 laptop, but at boot kernel is
paniced. Here is tha debug messages. Same error with FreeBSD 5.3-RC2
(amd64), 5.2.1-RELEASE (amd64). OpenBSD 3.6 and NetBSD 2.0-BETA is ok.
Any idea?
Copyright (c) 2003, 2004 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly 1.0A-RELEASE #1: Wed Jul 14 18:55:41 GMT 2004
root@:/usr/obj/usr/src/sys/GENERIC
CPU: Mobile AMD Athlon(tm) 64 Processor 3000+ (1804.11-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0xf4a Stepping = 10
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xe0500000<<b20>,AMIE,<b29>,DSP,3DNow!>
real memory = 267321344 (261056K bytes)
avail memory = 249167872 (243328K bytes)
Preloaded elf kernel "/kernel" at 0xc061e000.
Preloaded elf module "/modules/acpi.ko" at 0xc061e21c.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 10 entries at 0xc00fdf20
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
acpi0: <PTLTD RSDT> on motherboard
installed MI handler for int 10
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz0: _CRT value is absurd, ignored (154.8C)
pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib1: couldn't read bus number from cfg space
pcib1: trying bus number 1
pci1: <ACPI PCI bus> on pcib1
pci1: <ATI model 4e50 graphics accelerator> at 0.0 irq 9
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_ec0: <Embedded Controller: GPE 0xb> port 0x66,0x62 on acpi0
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA 8385 host to PCI bridge> mem 0xe0000000-0xefffffff at device 0.0
on pci0
pcib2: <PCI to PCI bridge (vendor=1106 device=b188)> at device 1.0 on pci0
pci2: <PCI bus> on pcib2
pci2: <ATI model 4e50 graphics accelerator> at 0.0 irq 9
fwohci0: vendor=104c, dev=8026
fwohci0: <1394 Open Host Controller Interface> mem
0xd0000000-0xd0003fff,0xd0008000-0xd00087ff irq 11 at device 6.0 on pci0
installed MI handler for int 11
fwohci0: OHCI version 1.10 (ROM=1)
NMI ISA a1, EISA ff
RAM parity error, likely hardware failure.
Fatal trap 19: non-maskable interrupt trap while in kernel mode
instruction pointer = 0x8:0xc01dfdee
stack pointer = 0x10:0xc0640c24
frame pointer = 0x10:0xc0640c44
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, IOPL = 0
current process = 0 (swapper)
current thread = pri 12
interrupt mask = net tty bio cam
kernel: type 19 trap, code=0
Stopped at fwohci_init+0xfa: movl %ecx,%edi
db> tr
fwohci_init(c9f92000,c67eb470) at fwohci_init+0xfa
fwohci_pci_attach(c67eb470,c67eb470,c67eb398,c0640cb4,0) at
fwohci_pci_attach+0x1eb
device_probe_and_attach(c67eb470) at device_probe_and_attach+0xf2
bus_generic_attach(c67eb398,c67eb398,0,5c,c67ea540) at
bus_generic_attach+0x16
pci_attach(c67eb398,c67eb398,c67ea540,0,1) at pci_attach+0xb3
device_probe_and_attach(c67eb398) at device_probe_and_attach+0xf2
bus_generic_attach(c67ea540,c67ea540,c0482d18,0,c67ea540) at
bus_generic_attach+0x16
nexus_pcib_attach(c67ea540,c67ea540,c67ea468,0,1) at nexus_pcib_attach+0x1f
device_probe_and_attach(c67ea540) at device_probe_and_attach+0xf2
bus_generic_attach(c67ea468,c67ea420,c0640d5c,c0268302,c67ea468) at
bus_generic_attach+0x16
nexus_attach(c67ea468,c67ea468,c6818ea8,64b000,1) at nexus_attach+0xd
device_probe_and_attach(c67ea468) at device_probe_and_attach+0xf2
root_bus_configure(c67ea420,c0477fa0,0,4) at root_bus_configure+0x16
configure(0,63dc00,64b000,0,c0137e3c) at configure+0x22
mi_startup(63d000,0,0,0,0) at mi_startup+0x90
begin() at begin+0x43
db> ps
pid proc addr uid ppid pgrp flag stat wmesg wchan cmd
1 c6774e60 c677cda0 0 0 0 400204 1 swapper
0 c04adc80 c0640da0 0 0 0 400204 2 swapper
cpu 0 tdrunqmask 00001000 curthread 0xc04adde0 reqflags 0022
INCOMMING IPIQS:
tdq thread pid flags pri(act) sp wmesg comm
12 0xc6779de0 -1 00000e02 44( 12) 0xc677fd88 - taskqueue
12 0xc6779d00 -1 00000e02 44( 12) 0xc9f91d88 - acpi_thermal
tdq thread pid flags pri(act) sp wmesg comm
32 0xff800344 -1 00000000 44( 12) 0xff807d8c - idle_0
32 0xc04adde0 0 00000001 12( 12) 0xc0640d90 - swapper
32 0xc04fa528 -1 00010c00 112( 16) 0xc0f57d88 - ithread 22
32 0xc04fa390 -1 00010c00 110( 14) 0xc0f5ad88 - ithread 20
32 0xc6779ec0 1 00000600 42( 10) 0xc677cd3c - swapper
32 0xc6779de0 -1 00000e02 44( 12) 0xc677fd88 - taskqueue
32 0xc04fa1f8 -1 00010c00 110( 14) 0xc7ebfd88 - ithread 18
32 0xc04fa2c4 -1 00010c00 110( 14) 0xc9f82d88 - ithread 19
32 0xc04fa45c -1 00010c00 110( 14) 0xc9f85d88 - ithread 21
32 0xc04f9b98 -1 00010c00 124( 28) 0xc9f8dd88 - ithread 10
32 0xc6779d00 -1 00000e02 44( 12) 0xc9f91d88 - acpi_thermal
32 0xc04f9c64 -1 00010c00 124( 28) 0xc9f9cd88 - ithread 11
CURCPU 0 CURTHREAD 0xc04adde0 (0)
db>
without ACPI and APM
OK set hint.apm.0.disabled="1"
set hint.acpi.0.disabled="1"
OK boot -h
Copyright (c) 2003, 2004 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly 1.0A-RELEASE #1: Wed Jul 14 18:55:41 GMT 2004
root@:/usr/obj/usr/src/sys/GENERIC
CPU: Mobile AMD Athlon(tm) 64 Processor 3000+ (1804.11-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0xf4a Stepping = 10
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xe0500000<<b20>,AMIE,<b29>,DSP,3DNow!>
real memory = 267321344 (261056K bytes)
avail memory = 249540608 (243692K bytes)
Preloaded elf kernel "/kernel" at 0xc05c3000.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 10 entries at 0xc00fdf20
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA 8385 host to PCI bridge> mem 0xe0000000-0xefffffff at device 0.0
on pci0
pcib1: <PCI to PCI bridge (vendor=1106 device=b188)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 4e50 graphics accelerator> at 0.0 irq 9
fwohci0: vendor=104c, dev=8026
fwohci0: <1394 Open Host Controller Interface> mem
0xd0000000-0xd0003fff,0xd0008000-0xd00087ff irq 11 at device 6.0 on pci0
installed MI handler for int 11
fwohci0: OHCI version 1.10 (ROM=1)
NMI ISA b1, EISA ff
RAM parity error, likely hardware failure.
Fatal trap 19: non-maskable interrupt trap while in kernel mode
instruction pointer = 0x8:0xc01dfdee
stack pointer = 0x10:0xc05e5c24
frame pointer = 0x10:0xc05e5c44
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, IOPL = 0
current process = 0 (swapper)
current thread = pri 12
interrupt mask = net tty bio cam
kernel: type 19 trap, code=0
Stopped at fwohci_init+0xfa: movl %ecx,%edi
db> tr
fwohci_init(c7e6d000,c9ecb6f8) at fwohci_init+0xfa
fwohci_pci_attach(c9ecb6f8,c9ecb6f8,c9ecb620,c05e5cb4,0) at
fwohci_pci_attach+0x1eb
device_probe_and_attach(c9ecb6f8) at device_probe_and_attach+0xf2
bus_generic_attach(c9ecb620,c9ecb620,0,5c,c9ecb5d8) at
bus_generic_attach+0x16
pci_attach(c9ecb620,c9ecb620,c9ecb5d8,0,1) at pci_attach+0xb3
device_probe_and_attach(c9ecb620) at device_probe_and_attach+0xf2
bus_generic_attach(c9ecb5d8,c9ecb5d8,c0482d18,0,c9ecb5d8) at
bus_generic_attach+0x16
nexus_pcib_attach(c9ecb5d8,c9ecb5d8,c9ecb500,0,1) at nexus_pcib_attach+0x1f
device_probe_and_attach(c9ecb5d8) at device_probe_and_attach+0xf2
bus_generic_attach(c9ecb500,c9ecb4b8,c05e5d5c,c0268302,c9ecb500) at
bus_generic_attach+0x16
nexus_attach(c9ecb500,c9ecb500,c048602c,5f0000,1) at nexus_attach+0xd
device_probe_and_attach(c9ecb500) at device_probe_and_attach+0xf2
root_bus_configure(c9ecb4b8,c0477fa0,0,4) at root_bus_configure+0x16
configure(0,5e2c00,5f0000,0,c0137e3c) at configure+0x22
mi_startup(5e2000,0,0,0,0) at mi_startup+0x90
begin() at begin+0x43
db> ps
pid proc addr uid ppid pgrp flag stat wmesg wchan cmd
1 c6009e60 c6011da0 0 0 0 400204 1 swapper
0 c04adc80 c05e5da0 0 0 0 400204 2 swapper
cpu 0 tdrunqmask 00001000 curthread 0xc04adde0 reqflags 0022
INCOMMING IPIQS:
tdq thread pid flags pri(act) sp wmesg comm
12 0xc600ede0 -1 00000e02 44( 12) 0xc679ed88 - taskqueue
tdq thread pid flags pri(act) sp wmesg comm
32 0xff800344 -1 00000000 44( 12) 0xff807d8c - idle_0
32 0xc04adde0 0 00000001 12( 12) 0xc05e5d90 - swapper
32 0xc04fa528 -1 00010c00 112( 16) 0xc0f57d88 - ithread 22
32 0xc04fa390 -1 00010c00 110( 14) 0xc0f5ad88 - ithread 20
32 0xc600eec0 1 00000600 42( 10) 0xc6011d3c - swapper
32 0xc04fa1f8 -1 00010c00 110( 14) 0xc6018d88 - ithread 18
32 0xc04fa2c4 -1 00010c00 110( 14) 0xc601bd88 - ithread 19
32 0xc04fa45c -1 00010c00 110( 14) 0xc601ed88 - ithread 21
32 0xc600ede0 -1 00000e02 44( 12) 0xc679ed88 - taskqueue
32 0xc04f9c64 -1 00010c00 124( 28) 0xc7e76d88 - ithread 11
CURCPU 0 CURTHREAD 0xc04adde0 (0)
db>
[
Date Prev][
Date Next]
[
Thread Prev][
Thread Next]
[
Date Index][
Thread Index]
