DragonFly BSD
DragonFly kernel List (threaded) for 2004-06
[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]

USB/umass BBB bulk-in TIMEOUT issue


From: David Kanter <david_kanter@xxxxxxxxxxx>
Date: Fri, 04 Jun 2004 08:40:07 -0500

I hope this is the correct forum for user-type questions.

I have the latest CVS version of DragonFly, having cvsup'ed my FreeBSD 4.10 to DragonFlyBSD 1.0-CURRENT. I get the umass BBB bulk-in TIMEOUT error when trying to write an ISO image to my USB CD-RW. This CD-RW, and a USB printer, are connected via a USB 2.0 PCI card. After getting the error message, the machine reboots on its own.

I have made little changes to the GENERIC kernel. I added the ehci and USB_DEBUG options. (I'd like to send the output of USB_DEBUG, but where is the log file?)

Thanks for your help,
Dave

Dmesg reports:

Copyright (c) 2003-2004 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly 1.0-CURRENT #0: Thu Jun  3 18:15:14 CDT 2004
    root@xxxxxxxxx:/usr/src/sys/compile/MYKERNEL
CPU: Pentium II/Pentium II Xeon/Celeron (448.06-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x652  Stepping = 2

Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 268435456 (262144K bytes)
avail memory = 252530688 (246612K bytes)
Preloaded elf kernel "/kernel" at 0xc03ef000.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00fdf30
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia Riva TNT graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1460-0x146f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
installed MI handler for int 14
ata1: at 0x170 irq 15 on atapci0
installed MI handler for int 15
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1440-0x145f irq 9 at device 7.2 on pci0
installed MI handler for int 9
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <Intel 82371AB Power management controller> at 7.3
pci0: <unknown card> (vendor=0x11de, dev=0x6120) at 13.0 irq 11
ohci0: <NEC uPD 9210 USB controller> mem 0xf4001000-0xf4001fff irq 10 at device 14.0 on pci0
installed MI handler for int 10
usb1: OHCI version 1.0
usb1: <NEC uPD 9210 USB controller> on ohci0
usb1: USB revision 1.0
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ulpt0: hp deskjet 5600, rev 2.00/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
ohci1: <NEC uPD 9210 USB controller> mem 0xf4002000-0xf4002fff irq 5 at device 14.1 on pci0
installed MI handler for int 5
usb2: OHCI version 1.0
usb2: <NEC uPD 9210 USB controller> on ohci1
usb2: USB revision 1.0
uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
umass0: IOMEGA CDRW64892EXT3-B, rev 2.00/0.02, addr 2
umass0: SCSI over Bulk-Only; quirks = 0x0000
umass0:0:0:-1: Attached to scbus0
ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0xf4003000-0xf40030ff irq 9 at device 14.2 on pci0
ehci_pci_attach: companion usb1
ehci_pci_attach: companion usb2
usb3: EHCI version 0.95
usb3: companion controllers, 3 ports each: usb1 usb2
usb3: <NEC uPD 720100 USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 5 ports with 5 removable, self powered
umass1: IOMEGA CDRW64892EXT3-B, rev 2.00/0.02, addr 2
umass1: SCSI over Bulk-Only; quirks = 0x0000
umass1:1:1:-1: Attached to scbus1
pcm0: <Creative CT5880-C> port 0x1400-0x143f irq 5 at device 15.0 on pci0
pcm0: <SigmaTel STAC9721/23 AC97 Codec>
rl0: <D-Link DFE-530TX+ 10/100BaseTX> port 0x1000-0x10ff mem 0xf4003400-0xf40034ff irq 9 at device 16.0 on pci0
rl0: Ethernet address: 00:40:05:0a:f3:a8
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xdc000-0xdffff,0xe4000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
installed MI handler for int 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
installed MI handler for int 1
psm0: <PS/2 Mouse> irq 12 on atkbdc0
installed MI handler for int 12
psm0: model MouseMan+, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
installed MI handler for int 4
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
installed MI handler for int 7
sio4: type 16550A
installed MI handler for int 3
installed MI handler for int 0
IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default
ad0: 12395MB <IBM-DTTA-371290> [25184/16/63] at ata0-master UDMA33
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-M1202> at ata1-master PIO4
afd0: 96MB <IOMEGA ZIP 100 ATAPI> [96/64/32] at ata1-slave PIO0
ulpt0: at uhub1 port 2 (addr 2) disconnected
ulpt: Warning: cdevsw_remove() called while 2 device refs still exist! (major 113)
ulpt0: detached
umass0: at uhub2 port 2 (addr 2) disconnected
umass0: detached
ulpt0: hp deskjet 5600, rev 2.00/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
Mounting root from ufs:/dev/ad0s3a
cd0 at umass-sim1 bus 1 target 0 lun 0
cd0: <IOMEGA CDRW64892EXT3-B 6OP1> Removable CD-ROM SCSI-0 device
cd0: 1.000MB/s transfers
cd0: cd present [1 x 2048 byte records]
cd1 at ata1 bus 0 target 0 lun 0
cd1: <TOSHIBA DVD-ROM SD-M1202 1020> Removable CD-ROM SCSI-0 device
cd1: 16.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
da0 at ata1 bus 0 target 1 lun 0
da0: <IOMEGA ZIP 100 14.A> Removable Direct Access SCSI-0 device
da0: 3.300MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
WARNING: / was not properly dismounted




[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]