DragonFly bugs List (threaded) for 2008-07
DragonFly BSD
DragonFly bugs List (threaded) for 2008-07
[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]

Sata problem


From: Kornilios Kourtis <kkourt@xxxxxxxxxxxxxxxxx>
Date: Fri, 25 Jul 2008 13:53:26 +0300

Hi,

I'm trying to install dragonflybsd on this machine: 
http://www.supermicro.com/products/motherboard/Xeon1333/5400/X7DWT.cfm

Since the machine does not have a CD-ROM, I'm netbooting it using the
configuration found on the CD from a linux server (nfs root + dhcp).

There seems to be some problem with the SATA disk:

| # uname -a
| DragonFly  2.0.0-RELEASE DragonFly 2.0.0-RELEASE #1: Sat Jul 19 14:34:49 PDT 2008     root@test12.backplane.com:/usr/obj/usr/src/sys/GENERIC  i38
| # dmesg | grep -i sata
| atapci0: <Intel 63XXESB2 SATA300 controller> port 0x1860-0x186f,0x1870-0x1873,0x1878-0x187f,0x1874-0x1877,0x1880-0x1887 mem 0xd9600400-0xd96007ff irq 10 at device 31.2 on pci0
| ad6: 238475MB <WDC WD2500JS-55NCB1 10.02E01> at ata3-master SATA150
| # dd if=/dev/zero of=/dev/ad6 bs=1024 count=1
| dd: /dev/ad6: Device not configured

I'm attaching the full dmesg.

Thanks,

-- 
Kornilios Kourtis
Copyright (c) 2003-2008 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
DragonFly 2.0.0-RELEASE #1: Sat Jul 19 14:34:49 PDT 2008
    root@test12.backplane.com:/usr/obj/usr/src/sys/GENERIC
TSC clock: 2000053854 Hz, i8254 clock: 1193171 Hz
CPU: Intel(R) Xeon(R) CPU           E5405  @ 2.00GHz (2000.08-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x10676  Stepping = 6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xce33d<SSE3,RSVD2,MON,DS_CPL,VMX,TM2,SSSE3,CX16,XTPR,RSVD15,<b18>,<b19>>
  Hyperthreading: 4 logical CPUs
real memory  = 3489005568 (3407232K bytes)
avail memory = 3377393664 (3298236K bytes)
Preloaded elf kernel "/kernel.BOOTP" at 0xc079b000.
Preloaded elf module "/modules/acpi.ko" at 0xc079b2b8.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 23 entries at 0xc00fde50
ACPI: RSDP @ 0x0xf6010/0x0014 (v  0 PTLTD )
ACPI: RSDT @ 0x0xcff6412b/0x005C (v  1 PTLTD    RSDT   0x06040000  LTP 0x00000000)
ACPI: FACP @ 0x0xcff68e10/0x0074 (v  1 INTEL  TUMWATER 0x06040000 PTL  0x00000003)
ACPI: DSDT @ 0x0xcff65c59/0x31B7 (v  1  Intel BLAKFORD 0x06040000 MSFT 0x0100000E)
ACPI: FACS @ 0x0xcff69fc0/0x0040
ACPI: APIC @ 0x0xcff68e84/0x00C8 (v  1 PTLTD     APIC   0x06040000  LTP 0x00000000)
ACPI: MCFG @ 0x0xcff68f4c/0x003C (v  1 PTLTD    MCFG   0x06040000  LTP 0x00000000)
ACPI: BOOT @ 0x0xcff68f88/0x0028 (v  1 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001)
ACPI: SPCR @ 0x0xcff68fb0/0x0050 (v  1 PTLTD  $UCRTBL$ 0x06040000 PTL  0x00000001)
ACPI: SSDT @ 0x0xcff659fa/0x025F (v  1  PmRef  Cpu0Tst 0x00003000 INTL 0x20050228)
ACPI: SSDT @ 0x0xcff65954/0x00A6 (v  1  PmRef  Cpu7Tst 0x00003000 INTL 0x20050228)
ACPI: SSDT @ 0x0xcff658ae/0x00A6 (v  1  PmRef  Cpu6Tst 0x00003000 INTL 0x20050228)
ACPI: SSDT @ 0x0xcff65808/0x00A6 (v  1  PmRef  Cpu5Tst 0x00003000 INTL 0x20050228)
ACPI: SSDT @ 0x0xcff65762/0x00A6 (v  1  PmRef  Cpu4Tst 0x00003000 INTL 0x20050228)
ACPI: SSDT @ 0x0xcff656bc/0x00A6 (v  1  PmRef  Cpu3Tst 0x00003000 INTL 0x20050228)
ACPI: SSDT @ 0x0xcff65616/0x00A6 (v  1  PmRef  Cpu2Tst 0x00003000 INTL 0x20050228)
ACPI: SSDT @ 0x0xcff65570/0x00A6 (v  1  PmRef  Cpu1Tst 0x00003000 INTL 0x20050228)
ACPI: SSDT @ 0x0xcff64187/0x13E9 (v  1  PmRef    CpuPm 0x00003000 INTL 0x20050228)
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
acpi0: <PTLTD   RSDT> on motherboard
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device.  You can't run both
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
isab0: <ACPI Generic ISA bridge> on acpi0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
legacypci0 on motherboard
pcib0: <Host to PCI bridge> on legacypci0
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=8086 device=25f7)> at device 2.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <PCI to PCI bridge (vendor=8086 device=3500)> irq 7 at device 0.0 on pci1
pci2: <PCI bus> on pcib2
pcib3: <PCI to PCI bridge (vendor=8086 device=3510)> irq 7 at device 0.0 on pci2
pci3: <PCI bus> on pcib3
pcib4: <PCI to PCI bridge (vendor=8086 device=3518)> irq 11 at device 2.0 on pci2
pci4: <PCI bus> on pcib4
em0: <Intel(R) PRO/1000 Network Connection, Version - 6.2.9> port 0x2000-0x201f mem 0xd9200000-0xd921ffff,0xd9220000-0xd923ffff irq 11 at device 0.0 on pci4
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
em0: MAC address: 00:30:48:7d:67:7e
em1: <Intel(R) PRO/1000 Network Connection, Version - 6.2.9> port 0x2020-0x203f mem 0xd9240000-0xd925ffff,0xd9260000-0xd927ffff irq 10 at device 0.1 on pci4
em1: MAC address: 00:30:48:7d:67:7f
pcib5: <PCI to PCI bridge (vendor=8086 device=350c)> at device 0.3 on pci1
pci5: <PCI bus> on pcib5
pcib6: <PCI to PCI bridge (vendor=8086 device=25f8)> at device 4.0 on pci0
pci6: <PCI bus> on pcib6
pcib7: <PCI to PCI bridge (vendor=8086 device=25f9)> at device 6.0 on pci0
pci7: <PCI bus> on pcib7
pci7: <unknown card> (vendor=0x14c1, dev=0x0008) at 0.0 irq 7
pci0: <unknown card> (vendor=0x8086, dev=0x1a38) at 8.0 irq 7
uhci0: <UHCI (generic) USB controller> port 0x1800-0x181f irq 5 at device 29.0 on pci0
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x1820-0x183f irq 10 at device 29.1 on pci0
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x1840-0x185f irq 11 at device 29.2 on pci0
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
pci0: <USB controller> at 29.7 irq 5
pcib8: <Intel 82801BA/CA/DB/EB/FB (ICH2/3/4/5/6) Hub to PCI bridge> at device 30.0 on pci0
pci8: <PCI bus> on pcib8
pci8: <ATI model 515e graphics accelerator> at 1.0 irq 11
isab1: <PCI to ISA bridge (vendor=8086 device=2670)> at device 31.0 on pci0
isa0: <ISA bus> on isab1
atapci0: <Intel 63XXESB2 SATA300 controller> port 0x1860-0x186f,0x1870-0x1873,0x1878-0x187f,0x1874-0x1877,0x1880-0x1887 mem 0xd9600400-0xd96007ff irq 10 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
ad6: 238475MB <WDC WD2500JS-55NCB1 10.02E01> at ata3-master SATA150
pci0: <unknown card> (vendor=0x8086, dev=0x269b) at 31.3 irq 10
orm0: <Option ROMs> at iomem 0xc0000-0xcafff,0xcb000-0xcbfff,0xcc000-0xccfff,0xcd000-0xd47ff on isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
ppc0: parallel port not found.
Mounting root from cd9660:/dev/acd0a
no disk named 'acd0a'
setrootbyname failed
iso_mountroot: can't find rootvp
Root mount failed: 6
Mounting root from nfs:
nfs_mountroot: interface em0 ip 10.32.90.155 bcast 10.32.90.191 mask 255.255.255.192
nfs_mountroot: gateway 10.32.90.190
NFS ROOT: 10.32.90.190:/export/dragonfly/2.0


[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]