Re: Problem intr11 livelocked

[Jonathan Buschmann <jonthn@xxxxxxxxxx>]

Bill Hacker a écrit :
> Jonathan Buschmann wrote:
>
> > Chuck Tuffli a écrit :
> >
> > > On Mon, Feb 28, 2005 at 12:43:26PM +0100, Jonathan Buschmann wrote:
> > >
> > > > Hello,
> > > >
> > > > I've tried to install Dfly on my PC : Asus P4C800-E Deluxe - P4C 
> > > > 2,6Ghz - Maxtor 120Go connected to RAID Promise - Intel Gb NIC.
> > >
> > >
> > >
> > > ...
> > >
> > > > PS: I've tried to get dmesg or else but without network i don't know 
> > > > how to do it.
> > >
> > >
> > >
> > >
> > > see if
> > >
> > > dmesg | grep 'irq 11'
> > >
> > > shows any unsupported PCI devices using this IRQ. Do you have another
> > > NIC you can plug into the box to get the dmesg?
> >
> > I managed to have a second nic in my PC and i've got uploaded the 
> > dmesg.boot file at this place :
> > http://www.actitude.net/~jonthn/dmesg.boot
> >
> > I hope it can help.
>
>
> Culprit appears to be the Intel IHC5 multi-function chip.
>
> Turn off/ disconnect its USB functions.
>
> Also, per my earlier direct message, disconnect/ shut off *everything* 
> you can,
> including emptying the PCI bus of cards.
>
> Add back one item/function at a time after you have regained control of the
> box.  When the problem reappears, you will have it boxed.
>
> HTH,
>
> Bill
At first sorry i was probably unclear ( lack in my english ) but i've 
currently no Dfly installed on the disk but i'm trying to install it.

I've disabled all i can (USB , NIC , Audio, Serial, Parallel Port, PCI 
SCSI Card)
Here is the dmesg and the vmstat output:

http://www.actitude.net/~jonthn/dmesg.boot.all_disabled_RAID-enabled
http://www.actitude.net/~jonthn/vmstat-all_disabled_RAID-enabled

I've already tried with or without ACPI/RAID Promise and there is still 
the same problem.

All i can say is that your right it's the ICH5 the problem (the ATA part 
only ?)

JonTHn