Re: Panic after enabling PNPBIOS and pcm device

[Matthew Dillon <dillon@xxxxxxxxxxxxxxxxxxxx>]

    It looks like it crashed from *within* a BIOS call.  These kinds
    of crashes are extremely difficult to track down because, more often
    then not, they occur due to BIOS bugs rather then due to kernel bugs.

					-Matt
					Matthew Dillon 
					<dillon@xxxxxxxxxxxxx>


:I tried to get a crash dump on this paticular issue but its during the
:probing stage.
:
:eisa0: <EISA bus> on motherboard
:eisa0: unknown card @@D0000 (0x000400000) at slot 1
:
:Fatal trap 9: general protection fault while in kernel mode
:instruction pointer      = 9x58:0x8d19
:stack pointer            = 0x10:0xeb8
:frame pointer            = 0x10:0xf0e
:code segment             = base 0xc00f0000, limit 0xffff, type 0x1b
:                         = DPL 0, pres 1, def32 0, gran 0
:processor eflags         = interrupt enabled, resume, IOPL=0
:current process          = 0 (swapper)
:current thread           = pri 12
:interrupt mask           = net tty bio cam
:kernel: type 9 trap, code=e9e4
:Stopped at       0xc00f8d19:     lcall     $0xe9e6, 0x11d
:db> tr
:kernbase(0,0,0,0,0) at 0xc00f8d19
:
:Does anyone have any thoughts of things to look at?
:
:Thanks in advance,
:
:GeekGod