DragonFly BSD
DragonFly bugs List (threaded) for 2004-03
[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]

Re: More umass problems.


From: Adam K Kirchhoff <adamk@xxxxxxxxxxxx>
Date: Thu, 11 Mar 2004 18:30:02 -0500 (EST)

Slight problem :-)

When I apply that patch, and boot with a serial console at 9600 baud,
everything comes up fine and my usb cd drive is detected.  If I boot with
my monitor as the console, I get the same panic.

So I thought I'd up the speed for the serial console.  Since passing
-h during the boot process (or having that in the boot.config file)
only runs the serial console at 9600, I've used the guide listed below to
figure out how to bump it up to 115200.

http://www.mike.or.at/docs/freebsdterminal.pdf

Unfortunately, that's a no-go.  By default (if I don't pass -h) it stays
with the monitor.  If I pass -h, it only runs at 9600.

Any ideas?

Adam

On Thu, 11 Mar 2004, Matthew Dillon wrote:

>
> :On Thu, 11 Mar 2004, Matthew Dillon wrote:
> :
> :>
> :> :> Here's that backtrace you wanted:
> :> :
> :> :> http://memory.visualtech.com/dbsd-boot-log.txt
> :> :
> :> :Was that any help in tracking down the bug?
> :> :
> :> :Adam
> :>
> :>     Sorry, I'm now officially overloaded with work :-)
> :
> :No need to apologize.  We all get like that at times :-)
> :
> :>     Lets see... yes, that sure does.  It's a case of a timeout being
> :>     installed and the device going away before the timeout occurs.
> :>
> :>     Could you please try the follow patch?  It fixes one bug, but the bug
> :>     is not likely responsible for your panic, and it adds a debugging
> :>     printf that will help me diagnose the problem if the panic still occurs.
> :
> :Done.  Check out the same URL again.
> :
> :Adam
>
>     Try this patch.   I still haven't found a smoking gun, but I
>     suspect that a temporary malloc failure could have caused the
>     umass code to deregister the SCSI target twice.
>
> 						-Matt
>
> Index: cam_extend.c
> ===================================================================
> RCS file: /cvs/src/sys/bus/cam/cam_extend.c,v
> retrieving revision 1.3
> diff -u -r1.3 cam_extend.c
> --- cam_extend.c	7 Aug 2003 21:16:44 -0000	1.3
> +++ cam_extend.c	11 Mar 2004 21:39:42 -0000
> @@ -40,7 +40,7 @@
>  static void *
>  cam_extend_alloc(size_t s)
>  {
> -	void *p = malloc(s, M_DEVBUF, M_NOWAIT);
> +	void *p = malloc(s, M_DEVBUF, M_WAITOK);
>  	if (!p)
>  		panic("extend_alloc: malloc failed.");
>  	return p;
> Index: cam_periph.c
> ===================================================================
> RCS file: /cvs/src/sys/bus/cam/cam_periph.c,v
> retrieving revision 1.7
> diff -u -r1.7 cam_periph.c
> --- cam_periph.c	30 Jan 2004 05:42:09 -0000	1.7
> +++ cam_periph.c	11 Mar 2004 21:39:56 -0000
> @@ -105,8 +105,7 @@
>  		return (CAM_REQ_INVALID);
>  	}
>
> -	periph = (struct cam_periph *)malloc(sizeof(*periph), M_DEVBUF,
> -					     M_NOWAIT);
> +	periph = malloc(sizeof(*periph), M_DEVBUF, M_WAITOK);
>
>  	if (periph == NULL)
>  		return (CAM_RESRC_UNAVAIL);
> Index: cam_queue.c
> ===================================================================
> RCS file: /cvs/src/sys/bus/cam/cam_queue.c,v
> retrieving revision 1.3
> diff -u -r1.3 cam_queue.c
> --- cam_queue.c	7 Aug 2003 21:16:44 -0000	1.3
> +++ cam_queue.c	11 Mar 2004 21:41:08 -0000
> @@ -51,7 +51,7 @@
>  {
>  	struct camq *camq;
>
> -	camq = (struct camq *)malloc(sizeof(*camq), M_DEVBUF, M_NOWAIT);
> +	camq = malloc(sizeof(*camq), M_DEVBUF, M_WAITOK);
>  	if (camq != NULL) {
>  		if (camq_init(camq, size) != 0) {
>  			free(camq, M_DEVBUF);
> @@ -67,8 +67,8 @@
>  	bzero(camq, sizeof(*camq));
>  	camq->array_size = size;
>  	if (camq->array_size != 0) {
> -		camq->queue_array = (cam_pinfo**)malloc(size*sizeof(cam_pinfo*),
> -							M_DEVBUF, M_NOWAIT);
> +		camq->queue_array = malloc(size*sizeof(cam_pinfo*), M_DEVBUF,
> +						M_WAITOK);
>  		if (camq->queue_array == NULL) {
>  			printf("camq_init: - cannot malloc array!\n");
>  			return (1);
> @@ -120,8 +120,7 @@
>  		panic("camq_resize: New queue size can't accomodate "
>  		      "queued entries.");
>  #endif
> -	new_array = (cam_pinfo **)malloc(new_size * sizeof(cam_pinfo *),
> -					 M_DEVBUF, M_NOWAIT);
> +	new_array = malloc(new_size * sizeof(cam_pinfo *), M_DEVBUF, M_WAITOK);
>  	if (new_array == NULL) {
>  		/* Couldn't satisfy request */
>  		return (CAM_RESRC_UNAVAIL);
> @@ -209,7 +208,7 @@
>  {
>  	struct cam_devq *devq;
>
> -	devq = (struct cam_devq *)malloc(sizeof(*devq), M_DEVBUF, M_NOWAIT);
> +	devq = malloc(sizeof(*devq), M_DEVBUF, M_WAITOK);
>  	if (devq == NULL) {
>  		printf("cam_devq_alloc: - cannot malloc!\n");
>  		return (NULL);
> @@ -266,7 +265,7 @@
>  {
>  	struct cam_ccbq *ccbq;
>
> -	ccbq = (struct cam_ccbq *)malloc(sizeof(*ccbq), M_DEVBUF, M_NOWAIT);
> +	ccbq = malloc(sizeof(*ccbq), M_DEVBUF, M_WAITOK);
>  	if (ccbq == NULL) {
>  		printf("cam_ccbq_alloc: - cannot malloc!\n");
>  		return (NULL);
> Index: cam_sim.c
> ===================================================================
> RCS file: /cvs/src/sys/bus/cam/cam_sim.c,v
> retrieving revision 1.4
> diff -u -r1.4 cam_sim.c
> --- cam_sim.c	7 Aug 2003 21:16:44 -0000	1.4
> +++ cam_sim.c	11 Mar 2004 21:42:25 -0000
> @@ -60,7 +60,12 @@
>  {
>  	struct cam_sim *sim;
>
> +	sim = malloc(sizeof(struct cam_sim), M_DEVBUF, M_WAITOK);
> +#if 0
>  	/*
> +	 * XXX REMOVED, this is ridiculous, you don't make memory allocations
> +	 * optional if the caller can't handle the failure gracefully.
> +	 &
>  	 * If this is the xpt layer creating a sim, then it's OK
>  	 * to wait for an allocation.
>  	 *
> @@ -72,6 +77,7 @@
>  	else
>  		sim = (struct cam_sim *)malloc(sizeof(struct cam_sim),
>  					       M_DEVBUF, M_NOWAIT);
> +#endif
>
>  	if (sim != NULL) {
>  		sim->sim_action = sim_action;
> Index: cam_xpt.c
> ===================================================================
> RCS file: /cvs/src/sys/bus/cam/cam_xpt.c,v
> retrieving revision 1.9
> diff -u -r1.9 cam_xpt.c
> --- cam_xpt.c	30 Jan 2004 05:42:09 -0000	1.9
> +++ cam_xpt.c	11 Mar 2004 21:51:58 -0000
> @@ -1359,9 +1359,8 @@
>  	/*
>  	 * Register a callback for when interrupts are enabled.
>  	 */
> -	xpt_config_hook =
> -	    (struct intr_config_hook *)malloc(sizeof(struct intr_config_hook),
> -					      M_TEMP, M_NOWAIT | M_ZERO);
> +	xpt_config_hook = malloc(sizeof(struct intr_config_hook),
> +				  M_TEMP, M_WAITOK | M_ZERO);
>  	if (xpt_config_hook == NULL) {
>  		printf("xpt_init: Cannot malloc config hook "
>  		       "- failing attach\n");
> @@ -3191,7 +3190,7 @@
>  			}
>  		} else {
>  			cur_entry = malloc(sizeof(*cur_entry), M_DEVBUF,
> -					   M_NOWAIT);
> +					   M_WAITOK);
>  			if (cur_entry == NULL) {
>  				splx(s);
>  				csa->ccb_h.status = CAM_RESRC_UNAVAIL;
> @@ -3791,7 +3790,7 @@
>  	struct	   cam_path *path;
>  	cam_status status;
>
> -	path = (struct cam_path *)malloc(sizeof(*path), M_DEVBUF, M_NOWAIT);
> +	path = malloc(sizeof(*path), M_DEVBUF, M_WAITOK);
>
>  	if (path == NULL) {
>  		status = CAM_RESRC_UNAVAIL;
> @@ -4070,8 +4069,7 @@
>  	int s;
>
>  	sim->bus_id = bus;
> -	new_bus = (struct cam_eb *)malloc(sizeof(*new_bus),
> -					  M_DEVBUF, M_NOWAIT);
> +	new_bus = malloc(sizeof(*new_bus), M_DEVBUF, M_WAITOK);
>  	if (new_bus == NULL) {
>  		/* Couldn't satisfy request */
>  		return (CAM_RESRC_UNAVAIL);
> @@ -4593,7 +4591,7 @@
>
>  	s = splsoftcam();
>  	if ((new_ccb = (union ccb *)ccb_freeq.slh_first) == NULL) {
> -		new_ccb = malloc(sizeof(*new_ccb), M_DEVBUF, M_NOWAIT);
> +		new_ccb = malloc(sizeof(*new_ccb), M_DEVBUF, M_WAITOK);
>                  if (new_ccb == NULL) {
>  			splx(s);
>  			return (NULL);
> @@ -4615,6 +4613,8 @@
>  	int s;
>
>  	s = splcam();
> +	printf("xpt_release_bus(%p): %d %p\n",
> +		bus, bus->refcount, TAILQ_FIRST(&bus->et_entries));
>  	if ((--bus->refcount == 0)
>  	 && (TAILQ_FIRST(&bus->et_entries) == NULL)) {
>  		TAILQ_REMOVE(&xpt_busses, bus, links);
> @@ -4630,7 +4630,7 @@
>  {
>  	struct cam_et *target;
>
> -	target = (struct cam_et *)malloc(sizeof(*target), M_DEVBUF, M_NOWAIT);
> +	target = malloc(sizeof(*target), M_DEVBUF, M_WAITOK);
>  	if (target != NULL) {
>  		struct cam_et *cur_target;
>
> @@ -4667,6 +4667,9 @@
>  	int s;
>
>  	s = splcam();
> +	printf("xpt_release_target(%p,%p): %d %p\n",
> +		bus, target,
> +		target->refcount, TAILQ_FIRST(&target->ed_entries));
>  	if ((--target->refcount == 0)
>  	 && (TAILQ_FIRST(&target->ed_entries) == NULL)) {
>  		TAILQ_REMOVE(&bus->et_entries, target, links);
> @@ -4692,8 +4695,7 @@
>  	if (status != CAM_REQ_CMP) {
>  		device = NULL;
>  	} else {
> -		device = (struct cam_ed *)malloc(sizeof(*device),
> -						 M_DEVBUF, M_NOWAIT);
> +		device = malloc(sizeof(*device), M_DEVBUF, M_WAITOK);
>  	}
>
>  	if (device != NULL) {
> @@ -4768,6 +4770,10 @@
>  	int s;
>
>  	s = splcam();
> +	printf("xpt_release_device(%p,%p,%p): %d %08x\n",
> +		bus, target, device,
> +		device->refcount, device->flags);
> +
>  	if ((--device->refcount == 0)
>  	 && ((device->flags & CAM_DEV_UNCONFIGURED) != 0)) {
>  		struct cam_devq *devq;
> @@ -4776,9 +4782,11 @@
>  		 || device->send_ccb_entry.pinfo.index != CAM_UNQUEUED_INDEX)
>  			panic("Removing device while still queued for ccbs");
>
> -		if ((device->flags & CAM_DEV_REL_TIMEOUT_PENDING) != 0)
> -				untimeout(xpt_release_devq_timeout, device,
> -					  device->c_handle);
> +		if ((device->flags & CAM_DEV_REL_TIMEOUT_PENDING) != 0) {
> +			device->flags &= ~CAM_DEV_REL_TIMEOUT_PENDING;
> +			untimeout(xpt_release_devq_timeout, device,
> +				  device->c_handle);
> +		}
>
>  		TAILQ_REMOVE(&target->ed_entries, device,links);
>  		target->generation++;
> @@ -5150,14 +5158,14 @@
>  	}
>
>  	if (request_ccb == NULL) {
> -		request_ccb = malloc(sizeof(union ccb), M_TEMP, M_NOWAIT);
> +		request_ccb = malloc(sizeof(union ccb), M_TEMP, M_WAITOK);
>  		if (request_ccb == NULL) {
>  			xpt_print_path(path);
>  			printf("xpt_scan_lun: can't allocate CCB, can't "
>  			       "continue\n");
>  			return;
>  		}
> -		new_path = malloc(sizeof(*new_path), M_TEMP, M_NOWAIT);
> +		new_path = malloc(sizeof(*new_path), M_TEMP, M_WAITOK);
>  		if (new_path == NULL) {
>  			xpt_print_path(path);
>  			printf("xpt_scan_lun: can't allocate path, can't "
> @@ -5235,7 +5243,7 @@
>  		return(CAM_REQ_CMP_ERR);
>  	}
>
> -	softc = (probe_softc *)malloc(sizeof(*softc), M_TEMP, M_NOWAIT);
> +	softc = malloc(sizeof(*softc), M_TEMP, M_WAITOK);
>
>  	if (softc == NULL) {
>  		printf("proberegister: Unable to probe new device. "
> @@ -5389,7 +5397,7 @@
>  		mode_buf_len = sizeof(struct scsi_mode_header_6)
>  			     + sizeof(struct scsi_mode_blk_desc)
>  			     + sizeof(struct scsi_control_page);
> -		mode_buf = malloc(mode_buf_len, M_TEMP, M_NOWAIT);
> +		mode_buf = malloc(mode_buf_len, M_TEMP, M_WAITOK);
>  		if (mode_buf != NULL) {
>  	                scsi_mode_sense(csio,
>  					/*retries*/4,
> @@ -5420,9 +5428,8 @@
>  		device->serial_num_len = 0;
>
>  		if ((device->quirk->quirks & CAM_QUIRK_NOSERIAL) == 0)
> -			serial_buf = (struct scsi_vpd_unit_serial_number *)
> -				malloc(sizeof(*serial_buf), M_TEMP,
> -					M_NOWAIT | M_ZERO);
> +			serial_buf = malloc(sizeof(*serial_buf), M_TEMP,
> +					    M_WAITOK | M_ZERO);
>
>  		if (serial_buf != NULL) {
>  			scsi_inquiry(csio,
> @@ -5637,8 +5644,8 @@
>
>  			have_serialnum = 1;
>  			path->device->serial_num =
> -				(u_int8_t *)malloc((serial_buf->length + 1),
> -						   M_DEVBUF, M_NOWAIT);
> +				malloc((serial_buf->length + 1),
> +				       M_DEVBUF, M_WAITOK);
>  			if (path->device->serial_num != NULL) {
>  				bcopy(serial_buf->serial_num,
>  				      path->device->serial_num,
> Index: scsi/scsi_cd.c
> ===================================================================
> RCS file: /cvs/src/sys/bus/cam/scsi/scsi_cd.c,v
> retrieving revision 1.11
> diff -u -r1.11 scsi_cd.c
> --- scsi/scsi_cd.c	16 Feb 2004 19:43:28 -0000	1.11
> +++ scsi/scsi_cd.c	11 Mar 2004 21:45:16 -0000
> @@ -706,7 +706,7 @@
>  		return(CAM_REQ_CMP_ERR);
>  	}
>
> -	softc = (struct cd_softc *)malloc(sizeof(*softc),M_DEVBUF,M_NOWAIT);
> +	softc = malloc(sizeof(*softc), M_DEVBUF, M_WAITOK);
>
>  	if (softc == NULL) {
>  		printf("cdregister: Unable to probe new device. "
> @@ -920,7 +920,7 @@
>  		 */
>  		else {
>  			nchanger = malloc(sizeof(struct cdchanger),
> -				M_DEVBUF, M_NOWAIT);
> +				M_DEVBUF, M_WAITOK);
>
>  			if (nchanger == NULL) {
>  				softc->flags &= ~CD_FLAG_CHANGER;
> @@ -1630,9 +1630,7 @@
>  	case CD_STATE_PROBE:
>  	{
>
> -		rcap = (struct scsi_read_capacity_data *)malloc(sizeof(*rcap),
> -								M_TEMP,
> -								M_NOWAIT);
> +		rcap = malloc(sizeof(*rcap), M_TEMP, M_WAITOK);
>  		if (rcap == NULL) {
>  			xpt_print_path(periph->path);
>  			printf("cdstart: Couldn't malloc read_capacity data\n");
> Index: scsi/scsi_ch.c
> ===================================================================
> RCS file: /cvs/src/sys/bus/cam/scsi/scsi_ch.c,v
> retrieving revision 1.6
> diff -u -r1.6 scsi_ch.c
> --- scsi/scsi_ch.c	7 Aug 2003 21:16:44 -0000	1.6
> +++ scsi/scsi_ch.c	11 Mar 2004 21:45:32 -0000
> @@ -378,7 +378,7 @@
>  		return(CAM_REQ_CMP_ERR);
>  	}
>
> -	softc = (struct ch_softc *)malloc(sizeof(*softc),M_DEVBUF,M_NOWAIT);
> +	softc = malloc(sizeof(*softc), M_DEVBUF, M_WAITOK);
>
>  	if (softc == NULL) {
>  		printf("chregister: Unable to probe new device. "
> @@ -542,7 +542,7 @@
>  				  sizeof(struct scsi_mode_blk_desc) +
>  				 sizeof(struct page_element_address_assignment);
>
> -		mode_buffer = malloc(mode_buffer_len, M_TEMP, M_NOWAIT);
> +		mode_buffer = malloc(mode_buffer_len, M_TEMP, M_WAITOK);
>
>  		if (mode_buffer == NULL) {
>  			printf("chstart: couldn't malloc mode sense data\n");
> @@ -1377,7 +1377,7 @@
>  	 */
>  	mode_buffer_len = sizeof(struct scsi_mode_sense_data);
>
> -	mode_buffer = malloc(mode_buffer_len, M_TEMP, M_NOWAIT);
> +	mode_buffer = malloc(mode_buffer_len, M_TEMP, M_WAITOK);
>
>  	if (mode_buffer == NULL) {
>  		printf("chgetparams: couldn't malloc mode sense data\n");
> Index: scsi/scsi_da.c
> ===================================================================
> RCS file: /cvs/src/sys/bus/cam/scsi/scsi_da.c,v
> retrieving revision 1.13
> diff -u -r1.13 scsi_da.c
> --- scsi/scsi_da.c	16 Feb 2004 19:43:28 -0000	1.13
> +++ scsi/scsi_da.c	11 Mar 2004 21:45:51 -0000
> @@ -1218,7 +1218,7 @@
>  		return(CAM_REQ_CMP_ERR);
>  	}
>
> -	softc = (struct da_softc *)malloc(sizeof(*softc),M_DEVBUF,M_NOWAIT);
> +	softc = malloc(sizeof(*softc), M_DEVBUF, M_WAITOK);
>
>  	if (softc == NULL) {
>  		printf("daregister: Unable to probe new device. "
> @@ -1434,9 +1434,7 @@
>  		struct ccb_scsiio *csio;
>  		struct scsi_read_capacity_data *rcap;
>
> -		rcap = (struct scsi_read_capacity_data *)malloc(sizeof(*rcap),
> -								M_TEMP,
> -								M_NOWAIT);
> +		rcap = malloc(sizeof(*rcap), M_TEMP, M_WAITOK);
>  		if (rcap == NULL) {
>  			printf("dastart: Couldn't malloc read_capacity data\n");
>  			/* da_free_periph??? */
> Index: scsi/scsi_low.c
> ===================================================================
> RCS file: /cvs/src/sys/bus/cam/scsi/scsi_low.c,v
> retrieving revision 1.7
> diff -u -r1.7 scsi_low.c
> --- scsi/scsi_low.c	11 Feb 2004 17:46:33 -0000	1.7
> +++ scsi/scsi_low.c	11 Mar 2004 21:46:37 -0000
> @@ -390,7 +390,7 @@
>   * SCSI INTERFACE (XS)
>   **************************************************************/
>  #define	SCSI_LOW_MINPHYS		0x10000
> -#define	SCSI_LOW_MALLOC(size)		malloc((size), M_DEVBUF, M_NOWAIT)
> +#define	SCSI_LOW_MALLOC(size)		malloc((size), M_DEVBUF, M_WAITOK)
>  #define	SCSI_LOW_FREE(pt)		free((pt), M_DEVBUF)
>  #define	SCSI_LOW_ALLOC_CCB(flags)	scsi_low_get_ccb((flags))
>  #define	SCSI_LOW_XS_POLL_HZ		1000
> @@ -880,7 +880,7 @@
>  /**************************************************************
>   * SCSI INTERFACE (CAM)
>   **************************************************************/
> -#define	SCSI_LOW_MALLOC(size)		malloc((size), M_DEVBUF, M_NOWAIT)
> +#define	SCSI_LOW_MALLOC(size)		malloc((size), M_DEVBUF, M_WAITOK)
>  #define	SCSI_LOW_FREE(pt)		free((pt), M_DEVBUF)
>  #define	SCSI_LOW_ALLOC_CCB(flags)	scsi_low_get_ccb()
>
> Index: scsi/scsi_pass.c
> ===================================================================
> RCS file: /cvs/src/sys/bus/cam/scsi/scsi_pass.c,v
> retrieving revision 1.8
> diff -u -r1.8 scsi_pass.c
> --- scsi/scsi_pass.c	7 Aug 2003 21:16:45 -0000	1.8
> +++ scsi/scsi_pass.c	11 Mar 2004 21:46:50 -0000
> @@ -304,8 +304,7 @@
>  		return(CAM_REQ_CMP_ERR);
>  	}
>
> -	softc = (struct pass_softc *)malloc(sizeof(*softc),
> -					    M_DEVBUF, M_NOWAIT);
> +	softc = malloc(sizeof(*softc), M_DEVBUF, M_WAITOK);
>
>  	if (softc == NULL) {
>  		printf("passregister: Unable to probe new device. "
> Index: scsi/scsi_pt.c
> ===================================================================
> RCS file: /cvs/src/sys/bus/cam/scsi/scsi_pt.c,v
> retrieving revision 1.7
> diff -u -r1.7 scsi_pt.c
> --- scsi/scsi_pt.c	7 Aug 2003 21:16:45 -0000	1.7
> +++ scsi/scsi_pt.c	11 Mar 2004 21:47:12 -0000
> @@ -332,7 +332,7 @@
>  		return(CAM_REQ_CMP_ERR);
>  	}
>
> -	softc = (struct pt_softc *)malloc(sizeof(*softc),M_DEVBUF,M_NOWAIT);
> +	softc = malloc(sizeof(*softc), M_DEVBUF, M_WAITOK);
>
>  	if (softc == NULL) {
>  		printf("daregister: Unable to probe new device. "
> Index: scsi/scsi_sa.c
> ===================================================================
> RCS file: /cvs/src/sys/bus/cam/scsi/scsi_sa.c,v
> retrieving revision 1.8
> diff -u -r1.8 scsi_sa.c
> --- scsi/scsi_sa.c	21 Nov 2003 22:46:13 -0000	1.8
> +++ scsi/scsi_sa.c	11 Mar 2004 21:47:20 -0000
> @@ -1450,7 +1450,7 @@
>  		return (CAM_REQ_CMP_ERR);
>  	}
>
> -	softc = (struct sa_softc *)malloc(sizeof (*softc), M_DEVBUF, M_NOWAIT);
> +	softc = malloc(sizeof (*softc), M_DEVBUF, M_WAITOK);
>  	if (softc == NULL) {
>  		printf("saregister: Unable to probe new device. "
>  		       "Unable to allocate softc\n");
> Index: scsi/scsi_ses.c
> ===================================================================
> RCS file: /cvs/src/sys/bus/cam/scsi/scsi_ses.c,v
> retrieving revision 1.7
> diff -u -r1.7 scsi_ses.c
> --- scsi/scsi_ses.c	9 Nov 2003 02:22:33 -0000	1.7
> +++ scsi/scsi_ses.c	11 Mar 2004 21:47:30 -0000
> @@ -124,7 +124,7 @@
>  #define	SES_DLOG		if (0) ses_log
>  #endif
>  #define	SES_VLOG		if (bootverbose) ses_log
> -#define	SES_MALLOC(amt)		malloc(amt, M_DEVBUF, M_NOWAIT)
> +#define	SES_MALLOC(amt)		malloc(amt, M_DEVBUF, M_WAITOK)
>  #define	SES_FREE(ptr, amt)	free(ptr, M_DEVBUF)
>  #define	MEMZERO			bzero
>  #define	MEMCPY(dest, src, amt)	bcopy(src, dest, amt)
> @@ -344,7 +344,7 @@
>  		return (CAM_REQ_CMP_ERR);
>  	}
>
> -	softc = malloc(sizeof (struct ses_softc), M_DEVBUF, M_NOWAIT);
> +	softc = malloc(sizeof (struct ses_softc), M_DEVBUF, M_WAITOK);
>  	if (softc == NULL) {
>  		printf("sesregister: Unable to probe new device. "
>  		       "Unable to allocate softc\n");
> Index: scsi/scsi_targ_bh.c
> ===================================================================
> RCS file: /cvs/src/sys/bus/cam/scsi/scsi_targ_bh.c,v
> retrieving revision 1.6
> diff -u -r1.6 scsi_targ_bh.c
> --- scsi/scsi_targ_bh.c	2 Mar 2004 20:55:10 -0000	1.6
> +++ scsi/scsi_targ_bh.c	11 Mar 2004 21:48:07 -0000
> @@ -276,8 +276,7 @@
>  	for (i = 0; i < MAX_ACCEPT; i++) {
>  		struct ccb_accept_tio *atio;
>
> -		atio = (struct ccb_accept_tio*)malloc(sizeof(*atio), M_DEVBUF,
> -						      M_NOWAIT);
> +		atio = malloc(sizeof(*atio), M_DEVBUF, M_WAITOK);
>  		if (atio == NULL) {
>  			status = CAM_RESRC_UNAVAIL;
>  			break;
> @@ -321,8 +320,7 @@
>  	for (i = 0; i < MAX_ACCEPT; i++) {
>  		struct ccb_immed_notify *inot;
>
> -		inot = (struct ccb_immed_notify*)malloc(sizeof(*inot), M_DEVBUF,
> -						        M_NOWAIT);
> +		inot = malloc(sizeof(*inot), M_DEVBUF, M_WAITOK);
>
>  		if (inot == NULL) {
>  			status = CAM_RESRC_UNAVAIL;
> @@ -411,8 +409,7 @@
>  	cpi = (struct ccb_pathinq *)arg;
>
>  	/* Allocate our per-instance private storage */
> -	softc = (struct targbh_softc *)malloc(sizeof(*softc),
> -					      M_DEVBUF, M_NOWAIT);
> +	softc = malloc(sizeof(*softc), M_DEVBUF, M_WAITOK);
>  	if (softc == NULL) {
>  		printf("targctor: unable to malloc softc\n");
>  		return (CAM_REQ_CMP_ERR);
> @@ -724,15 +721,14 @@
>  	struct targbh_cmd_desc* descr;
>
>  	/* Allocate the targbh_descr structure */
> -	descr = (struct targbh_cmd_desc *)malloc(sizeof(*descr),
> -					       M_DEVBUF, M_NOWAIT);
> +	descr = malloc(sizeof(*descr), M_DEVBUF, M_WAITOK);
>  	if (descr == NULL)
>  		return (NULL);
>
>  	bzero(descr, sizeof(*descr));
>
>  	/* Allocate buffer backing store */
> -	descr->backing_store = malloc(MAX_BUF_SIZE, M_DEVBUF, M_NOWAIT);
> +	descr->backing_store = malloc(MAX_BUF_SIZE, M_DEVBUF, M_WAITOK);
>  	if (descr->backing_store == NULL) {
>  		free(descr, M_DEVBUF);
>  		return (NULL);
>



[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]