DragonFly On-Line Manual Pages

MODE2(1)                         User Commands                        MODE2(1)

NAME
       mode2, smode2, xmode2 - shows the pulse/space length of infrared
       signals

SYNOPSIS
       xmode2 [options]

DESCRIPTION
       The main purpose of these programs is to check operation of your home-
       brew LIRC receiver hardware and to see the IR waveform of the remote
       controller without an expensive oscilloscope. Very useful for
       debugging. Of course this program won't work with hardware that decodes
       the signals itself like e.g. TV cards or the Irman.

       xmode2 is based on smode2 by Sinkovics Zoltan. It is just a conversion
       from svga to X with some basic support for resizing. The only
       differences are that the --mode option enables an alternative display
       mode and that xmode2 can read and visualise mode2 output from stdin.

       -h --help
              display usage summary

       -v --version
              display version

       -d --device=device
              read from given device

       -H --driver=driver
              use given driver

       -g --geometry=geometry window geometry

       -t --timediv=value
              ms per unit

       -m --mode
              enable alternative display mode

       -r --raw
              access device directly

SEE ALSO
       mode2(1), smode2(1), xmode2(1)

       The documentation for lirc is maintained as html pages. They are
       located under html/ in the documentation directory.

mode2 0.9.0                       March 2011                          MODE2(1)